REPAIR/ MAINT OF INTERNAL ELECTRIFICATION INCLUDING EARTHING, FANS AND GEYSERS IN OP AREA AT AF STN GORKHPUR

Amount

Taking down carefully point wiring complete of any type (batten/surface conduit or concealed) for light point, fan point, bell point socket point or power point complete with all fitting such as switches, sockets pendants, ceiling rose, round block etc complete and making good disturbed surfaces of wall, floor or ceiling with plaster of tiles or roof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as specified and directed.

M&L for point wiring for one light / fan point controlled by one 5A switch using 1.5 sqmm cable (nominal area) stranded copper conductor (FRLS), single core, PVC insulated and unsheathed cable, 1100 V grade in and including concealed PVC conduit of size not less than 20mm dia all as directed with sunken type pressed steel terminal box 1.6 mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings/ junction boxes and wiring to be terminated in pressed steel sunken boxes with and including all accessories and top cover and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor PVC insulated and unsheathed cable as in earth wire connected to common earth dolly completed all as specified and directed.

All as per item No. 2 above but for one 5 Amps socket point controlled by one 5 Amps switch on same board.

All as per item No. 2 above but for one 5 Amps socket point controlled by one 5 Amps switch on independent board.

All as per item No. 2 above but for one bell point controlled by one 5 Amps bell push.

M&L for point wiring with (FRLS) flame retardant low smoke PVC insulated unsheathed cable 2.5 sqmm with multistranded copper conductor, in and including non metallic PVC concealed conduit not less than 20mm dia with fittings, including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc including provision of sunken pressed steel GI terminal boxes of not less than 1.6mm wall thickness, concealed in wall with top cover including (FRLS) flame retardant low smoke PVC insulated copper earth conductor 1.50sqmm connected to common earth and earth dolly complete for 3 pin 15 Amps socket independent. Note for item Nos 2 to 6 :- (i) Rate quoted shall be inclusive of cutting chases and making good the disturbed surfaces to match the existing surface.(ii) Switches, Socket outlet, call bell, bell push and fan regulators shall be measured and paid separately.

M&L for point wiring for one light/fan point controlled by one 5A switch using 1.5 sqmm cable (nominal area) stranded copper conductor (FRLS), single core, PVC insulated and unsheathed cable, 1100 V grade in and including PVC casing caping all as directed with sunken type pressed steel terminal box 1.6 mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings/ junction boxes and wiring to be terminated in pressed steel sunken boxes with top cover and including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor PVC insulated and unsheathed cable as in earth wire connected to common earth dolly completed all as specified and directed.

All as per item No. 7 above but for one 5 Amps socket point controlled by one 5 Amps switch on same board.

All as per item No. 7 above but for one 5 Amps socket point controlled by one 5 Amps switch on independent board.

All as per item No. 7 above but for one bell point controlled by one 5 Amps bell push.

M&L for point wiring with (FRLS) flame retardant low smoke PVC insulated unsheathed cable 2.5 sqmm with multistranded copper conductor, in and including PVC casing caping with fittings, including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc including provision of sunken modular type pressed steel GI terminal boxes of not less than 1.6mm wall thickness, concealed in wall with top cover including (FRLS) flame retardant low smoke PVC insulated copper earth conductor 1.50sqmm connected to common earth and earth dolly complete for 3 pin 15 Amps socket independent. Note for item Nos 7 to 11 :- (i) Rate quoted shall be inclusive of cutting chases and making good the disturbed surfaces to match the existing surface.(ii) Switches, Socket outlet, call bell, bell push and fan regulators shall be measured and paid separately.

S&F switch piano, flush type 5/6 amp, single pole, one way 240 volt complete all as specified and directed.

S&F switch piano, flush type 15/16 amp, single pole, one way 240 volt complete all as specified and directed.

S&F socket outlet, 3/5 pin, 5/6 amps flush type complete all as specified and directed.

S&F socket outlet, two in one 3 pin, 5/6 & 15/16 amps flush type complete all as specified and directed.

S&F bell push, flush type 5 amp, single pole, one way 240 volt complete all as specified and directed.

S&F ceiling rose surface polycarbonate 65X50mm three terminals complete all as specified and directed.

S&F fan regulator electronic step up type, SP 230 volt complete all as specified and as directed.

S&F lamp holder polycarbonate insulated body with back plate suitable for batten fittings complete all as specified and directed.

S&F call bell ding dong, AC single pole 240 volts complete all as specified and directed.

Taking down old unserviceable light fittings conventional type from wall surface / ceiling or any position and making good the disturbed surfaces all as specified and directed.

S&F 10 watt LED light fitting engineering plastic batten with white acrylic cover LED light (integrated LED channel) natural white, energy saving complete with its all accessories internally perwired and including connecting up with twin core twistered flexible copper conductor cable of suitable size complete all as specified and directed. Make:- Havells Cat part No. LHEXACP5IN1W010 or equivalent of approved make

S&F 20 watt LED light fitting engineering plastic batten with white acrylic cover LED light (integrated LED channel) natural white, energy saving complete with its all accessories internally perwired and including connecting up with twin core twistered flexible copper conductor cable of suitable size complete all as specified and directed. Make:- Havells Cat part No. LHEXBLP7PN1W020 or equivalent of approved make

S&F recess mounting LED luminaire of size 2'x2' white 34 watt, 230 volts for ceiling with driver connector block etc complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor of suitable size complete all as specified and directed. Make:- Havells Cat part No. PLANO2X2PLR34WLED840S or equivalent of approved make

S&F rechargeable 6W LED light with frosted PC cover and pull cord complete all as specified and directed. Make:- Havells Cat part No. LHEXTEP7CN1W006 or equivalent of approved make

S&F recess mounting LED luminaire round shape 12 watt, 230 volts for ceiling with driver connector block etc complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor of suitable size complete all as specified and directed. Make:- Havells Cat part No. IntegraNxtDLR12WLED865S or equivalent of approved make

S&F 9/10 watt LED 6000K bulk head light fitting complete all as specified and as directed. Make:- Havells Cat part No. RUGBYGENXFTS10WLED865 SSYMBOPC or equivalent of approved make

S&F, testing energy saving, die cast aluminium housing IP 65 protection, 25 W LED street light fitting with high power LED as light source complete fixed on pole using 30x5mm FI clamps, nuts, bolts & washers all as per site requirement complete all as specified and directed. Make:- Havells Cat No. ENDURASUNDOWNSL25WLED 765 PASY BOPCIHD or equivalent of approved make

S&F, testing energy saving, die cast aluminium housing IP 65 protection, 35 W LED street light fitting with high power LED as light source complete fixed on pole using 30x5mm FI clamps, nuts, bolts & washers all as per site requirement complete all as specified and directed. Make:-Havells Cat No.ENDCITYLITPLAT+SL35WLED757 SASY BOPCWOSPD or equivalent of approved make

S&F, testing energy saving, die cast aluminium housing IP 65 protection, 70 W LED flood light fitting with high power LED as light source complete fixed on pole using 30x5mm FI clamps, nuts, bolts & washers all as per site requirement complete all as specified and directed. Make:-Havells Cat No. JETAALBA FLOODLIGHT70W or equivalent of approved make

S&F in replacement brackets made out of 40/50mm dia medium grade GI pipe 1.50 mtr long bent to shape and size fixed on location using new 2 nos 30x5mm FI clamps made to shape incl nuts, bolts & washers complete all as specified and directed.

Taking down carefully old and unserviceable sub main wiring of 2/3 runs or main-wiring of any size of aluminium conductor cable from any position including wood batten, PVC conduit, steel conduit, PVC Casing caping etc including making good disturbed surface of wall ceiling etc complete all as specified and directed.

M&L for sub main wiring with 2 Nos single core PVC insulated unsheathed 2.50 sqmm stranded copper conductor cable and 1 No single core PVC insulated-unsheathed 1.5 sqmm stranded copper conductor cable for earth continuity, drawn in & including suitable PVC casing & capping /PVC pipe with all fittings ISI mark complete all as specified and directed. (length of 2 No 2.5 sqmm conductor cable, 1 No 1.5 sqmm conductor earth continuity cable and accessories shall be measured as one unit length)

M&L for sub main wiring with 2 Nos single core PVC insulated unsheathed 4.0 sqmm stranded copper conductor cable and 1 No single core PVC insulated-unsheathed 2.5 sqmm stranded copper conductor cable for earth continuity, drawn in & including suitable PVC casing & capping /PVC pipe with all fittings ISI mark complete all as specified and directed. (length of 2 No 4.0 sqmm conductor cable, 1 No 2.5 sqmm conductor earth continuity cable and accessories shall be measured as one unit length)

M&L for sub main wiring with 2 Nos single core PVC insulated -unsheathed 6.0 Sqmm stranded copper conductor cable and 1 No single core PVC insulated-unsheathed 4.0 Sqmm stranded copper conductor cable for earth continuity, drawn in & including suitable PVC casing & capping /PVC pipe with all fittings ISI mark complete all as specified and directed. (length of 2 No 6.0 Sqmm conductor cable, 1 No. 4.0 Sqmm conductor earth continuity cable and accessories shall be measured as one unit length)

Supply and fixing in repair 1100 volts grade heavy duty cable PVC insulated aluminium conductor served with inner sheathing of PVC tape and overall PVC sheathed for service connections of 6 Sqmm size twin core flat solid conductor cable complete from pole to distribution board main controlling switch complete all as specified and as directed.

Taking down old unserviceable MCCB DBs / MCB DB / Main Switches including MCBs/ MCCBs/ Isolators, complete all as specified and as directed. Note: Any disturbed surfaces of wall will be matched properly as the existing colour surfaces.

S&F factory made epoxy powder coated distribution board double door TP& N 4 ways (VTPN MCCB DB) with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knock outs complete all as specified and directed.

S&F factory made epoxy powder coated distribution board double door TP& N 4 ways (VTPN MCB DB) with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knock outs complete all as specified and directed.

S&F factory made epoxy powder coated distribution board SPN 12 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates all as specified & directed.

S&F factory made epoxy powder coated distribution board SPN 8 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates all as specified & directed.

S&F factory made epoxy powder coated distribution board SPN 4 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates all as specified & directed.

S&F sheet metal enclosure distribution board SPN 2 ways complete all as specified and directed.

S&F MCCB, 4 pole, 63 Amps, 16 KA current rating with adjustable thermal and magnetic setting conforming to IEC-609472 & IS-139473 to be fixed in distribution board complete all as specified and directed.

S&F MCCB, 4 pole, 100 Amps, 16 KA current rating with adjustable thermal and magnetic setting conforming to IEC-609472 & IS-139473 to be fixed in distribution board complete all as specified and directed.

S&F MCCB, 4 pole, 125 Amps, 16 KA current rating with adjustable thermal and magnetic setting conforming to IEC-609472 & IS-139473 to be fixed in distribution board complete all as specified and directed.

S&F MCB, SP, 6 to 32 Amps, 'C' curve, 10 KA breaking capacity, 240 volts complete all as specified and directed.

S&F MCB, SP, 40 Amps, 'C' curve, 10 KA breaking capacity, 240 volts complete all as specified and directed.

S&F MCB, SPN, 40 to 63 Amps, 'C' curve, 10 KA breaking capacity, 240 volts complete all as specified and directed.

S&F MCB, TP, 40 to 63 Amps, 'C' curve, 10 KA breaking capacity, 240 volts complete all as specified and directed.

S&F MCB, TPN, 40 to 63 Amps, 'C' curve, 10 KA breaking capacity, 240 volts complete all as specified and directed.

S&F sheet metal enclosures with socket plug top and MCBs with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified.

S&F exhaust fan (air freshener) single phase 230/240 volt AC 250mm sweep with louvers, plastic body and making connection with twisted copper flexible wire 23/0.0076mm including taking down old fan and deposited in MES store complete all as specified and directed.

S&F exhaust fan (air freshener) single phase 230/240 volt AC 300mm sweep with louvers, plastic body and making connection with twisted copper flexible wire 23/0.0076mm including taking down old fan and deposited in MES store complete all as specified and directed.

S&F exhaust fan single phase 230/240 volt AC 450mm sweep, with painted louvers, metal body and making connection with twisted copper flexible wire 23/0.0076mm including taking down old fan and deposited in MES store complete all as specified and directed.

S&F wall mounted fan complete AC 240 volts 50 Hz single phase of size 400mm sweep including making connection from ceiling rose to fan connector complete all as specified and directed. Make: Model Flatina HS of Havells of equivalent in Crompton / Usha/ Bajaj

Repairing of light point ( normal / flameproof ), fan point, socket point 5A/15A, switches sockets, fan regulator, light fixtures any type, lamp any type, MCB DB's & all electrical accessories in day to day / door to door maintenance and making it serviceable in all respect with replacement of any major part but including small length of wires (not more than 50cm) adhesive cable and other connected minor accessories by providing sufficient and skilled manpower. Work shall also include to check & removal of current leakages in Bldgs and any urgent nature of work as and when directed. The scope also include cutting of existing Bakelite sheet to accommodate new elect fittings/fixtures like switches, sockets, fan regulators etc. Note :- (a) The rate quoted by the contractor for Each Job is deemed to be included consisting of minimum 03 complaints in working hours between 0900 AM to 0500 PM in OP area by engaging one electrician and one helper. (b) The contractor or his representative will take complaint from MES complaint Register through MES job card. (c) The contractor will made separate items register with location and signature of user. (d) The contractor will maintain complete details of Job cards (Working/Off working hours) and items involved with date and user signature. (e) The ladder and T&P as required will be provided by the contractor. (f) Risk factor & security pass will be the contractor's end. (g) Material will be measured and paid separately in the relevant item here after. (h) All supply material shall be deposited by contractor in MES store yard and issued in every Job Card as per requirement. (j) The tradesmen should be available at MES area complaint cell (In MES Complex), after completing their daily Job Cards as well as during off working hours / Night / Sunday / Holiday.

All as per Item No. 57 above but for attending the electrical complaints during off working hours / Night / Sunday / Holiday time for 12 hours. Note :- All as per item No 57 above but the rate quoted by the contractor for 'Each Job' is deemed to be included 01 complaint in OP area

Supply only in replacement modular switch single pole 1 way, 1 module, 6 Amp complete all as specified and directed.

Supply only in replacement modular switch single pole 1 way, 1 module, 16 Amp complete all as specified and directed.

Supply only in replacement modular socket out let multipurpose 6A -2/3 pin, SP 1 way 2 module complete all as specified and directed.

Supply only in replacement modular socket out let multipurpose 6A/16A-2/3 pin, SP 1 way 2 module complete all as specified and directed.

Supply only in replacement switch piano, flush type 5/6 amp, single pole, one way 240 volt complete all as specified and directed.

Supply only in replacement switch piano, flush type 15/16 amp, single pole, one way 240 volt complete all as specified and directed.

Supply only in replacement socket outlet, 3/5 pin, 5/6 amps flush type complete all as specified and directed.

Supply only in replacement socket outlet, two in one 3 pin, 5/6 & 15/16 amps flush type complete all as specified and directed.

Supply only in replacement switch socket combination multipurpose 5 pin, 5/6 & 15/16 amps flush type complete all as specified and directed.

Supply only in replacement switch socket combination multipurpose 3/5 pin, 5/6 amps flush type complete all as specified and directed.

Supply only in replacement bell push, flush type 5 amp, single pole, one way 240 volt complete all as specified and directed.

Supply only in replacement ceiling rose surface polycarbonate 65X50mm three terminals complete all as specified and directed.

Supply only in replacement fan regulator electronic step up type, SP 230 volt complete all as specified and as directed.

Supply only in replacement lamp holder polycarbonate insulated body with back plate suitable for batten fittings complete all as specified and directed.

Supply only in replacement Call bell ding dong, AC single pole 240 volts complete all as specified and directed.

Supply only in replacement Starter for tube light 36/40 watt, 240 volts complete all as specified and directed.

Supply only in replacement LED tube rod 18/20 watt (4ft), 240 volts complete all as specified and directed.

Supply only in replacement lamp LED 9/12 watt, 240 volts complete all as specified and directed.

Supply only tape insulation, 1100 volts grade 20mm width, 15 mtrs long complete all as specified and directed.

Supply only in replacement ball bearing No. 6200 to 6203 complete all as specified and directed. Make:-SKF/NRB/NBC/TATA

Supply only in replacement gun metal bush of any description and size to suit existing motor shaft complete all as specified and directed.

Supply only in replacement capacitor of capacity 2.5 mfd PVC body complete all as specified and directed. Make:- EPCOS/JYOTI/ USHA

Supply only in replacement capacitor of capacity 3.15 mfd PVC body complete all as specified and directed. Make:- EPCOS/ JYOTI/ USHA

Supply only in replacement PVC insulated, flexible cable, twin core twisted of size 23/0.0076 with copper conductor in pieces for connecting fans complete all as specified and directed.

Supply only in replacement complete fan hanging assembly set comprising with rubber reel, MS clamps, nuts, bolts with one lock hole and lock pins suitable for any type of fans & down rods complete all as specified and directed.

Supply only in replacement 300mm long down rod 15 mm dia, MS tube light grade, duly finished with powder coating of white colour, including necessary holes and threading etc. complete all as specified and directed.

Supply only in replacement 900mm long down rod 15 mm dia, MS tube light grade, duly finished with powder coating of white colour, including necessary holes and threading etc. complete all as specified and directed.

Disconnecting, taking down & removing carefully the existing ceiling fan, exhaust fans, wall bracket fans, air circulating fans and pedestal fans etc. of any description, any sweep and from any position/locations for repairs/servicing/numbering, dismantling & opening of the fans, checking serviceability of parts, overhauling by necessary cleaning, oiling & greasing, fixing the serviceable parts in position, removing & replacement of defective/ unserviceable parts, if any, with new parts, reassembling the fans, making necessary adjustment and proper alignment of blades, hanging/fixing the repaired fans in position, connecting to existing electric sources and testing at site to the entire satisfaction of the department complete all as specified and directed. Note:- (i) The replacement of defective/ nonfunctional parts shall be measured & paid separately as “Supply only” under appropriate item of Sch ‘A’ and fixing charges for new items are deemed to be included under this item. (ii) Burnt out windings replaced, shall be measured and paid for separately under appropriate item here-in-after. (iii) The rates for above items are deemed to include transportation charges from E/M store yard to workshop and vice versa.

Taking out & removing old burnt-out winding and rewinding of motor of ceiling fans 1200/1400 mm sweep of any description and rewinding of fan motor with appropriate size super enameled copper wire approx. 200 gram including insulating material such as illumines paper, letherized paper, cotton tape, glass sleeving, insulating varnish etc testing at workshop and transportation to site, connecting and testing on full load to the entire satisfaction of the department for the following Fans:- Make of winding wire: Atlas/Finolex/ Devi Dayal

All as per item No. 87 above but rewinding of motor of exhaust fans of 225/250 mm sweep with 170 gram winding wire.

All as per item No. 87 above but rewinding of motor of exhaust fans of 300/400 mm sweep with 200 gram winding wire.

All as per item No. 87 above but rewinding of motor of air circulating fan of 400 mm sweep with 300 gram winding wire.

All as per item No. 87 above but rewinding of motor of pedestal fan of 400 mm sweep with 400 gram winding wire.

S&F in replacement aluminium strip of size 25x3.15mm complete with saddle, porcelain insulator and fixing screws, washers / accessories for roof and down conductor complete all as specified and directed.

M&L for brazing of earthing strips (GI / Copper / Aluminium) by arc / gas welding approx. 50mm long tapper joint complete all as specified and directed.

S&F in replacement porcelain insulators for fixing roof / down conductor including fixing of screws etc as specified and directed.

M&L for in replacement earthing with Galvanised iron earth plate electrode of size 600x600x6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal GL) with top of earth plate not less than 1.5 mtr below GL connected to GI strip of size 32x6 mm connected to earth plate electrode by means of GI nuts, bolts, and washers with and incl, PCC 1:3:6 type C-1 pit with cover of RCC 1:2:4 type B-1 reinforced with welded steel wire fabric not less than 4 Kg per Sqm, watering arrangements with 20mm dia GI medium grade pipe, GI funnel with GI mesh, filling with mixture of common salt and charcoal, necessary excavation and earth work in any type soil, including test point, testing and commissioning complete all as specified and directed. Note: (i) Earth resistance should be less than 3 Ohm. (ii) GI strip upto 7.5 mtr will be included in quoted rate.

Taking down geysers carefully of any type and make of capacity 25 ltrs after disconnecting water supply and electrical connection, opening of geysers for inspection of unserviceable parts followed by servicing overhauling after replacement of unserviceable component with cleaning of heating element and inner tank by de-scaling including assembling fixing in position, making all electrical & water supply connection, making functional and testing complete all specified and directed. Note:- Components/spare part required for replacement shall be paid for separately under respective item here in after as supply only

All as per item No. 96 above but of capacity 50 ltrs.

Supply only heating element ISI marked 1.5 KW suitable for geyser of 25 litres, horizontal or vertical type of any make complete all as specified and directed.

Supply only heating element ISI marked 2.0 KW suitable for geyser of 25 litres, horizontal or vertical type of any make complete all as specified and directed.

Supply only heating element pin type (Triangular) 1.5 KW rating capacity 230 V, ISI marked complete all as specified and directed.

Supply only heating element pin type 2.0 KW rating capacity 230 V, ISI marked complete all as specified and directed.

Supply only thermostat minimum 300mm long ISI marked suitable for geyser of 25/50 litres, horizontal or vertical type of any make complete all as specified and directed.

Supply only power indicating lamp circular/rectangle type suitable for 25/50 ltrs capacity geyser complete all as specified and directed.

Supply and filling up glass wool suitable for geyser of 25/50 litres, horizontal or vertical type of any make complete all as specified and directed.

M&L for repairing leakage of inner copper tank of geyser (any make) 25/50 litres capacity by brazing including all necessary denting etc complete all as specified and directed.

Renewal of inner copper cell geyser (any make) 25 litres capacity and making connections by brazing including all necessary accessories complete all as specified and directed.

Renewal of inner copper cell geyser (any make) 50 litres capacity and making connections by brazing including all necessary accessories complete all as specified and directed.

Renewal of base assembly complete suitable for geyser (any make) 25 litres capacity and making connections by brazing including all necessary accessories complete all as specified and directed.

Renewal of base assembly complete suitable for geyser (any make) 50 litres capacity and making connections by brazing including all necessary accessories complete all as specified and directed.

Supply only top or bottom cover for any make of geyser of 25 Ltrs capacity complete all as specified and directed.

Supply only top or bottom cover for any make of geyser of 50 Ltrs capacity complete all as specified and directed.

S&F in replacement PVC connection pipe 450 mm long heavy duty with check nut for 15 mm dia pipe complete all as specified and directed.

S&F in replacement hot water supply CP/PVC connection pipe of size 450mm long heavy duty with check nut for 15 mm dia pipe ISI marked complete all as specified and directed.

S&F in replacement plug top of polycarbonate 3 pin, 15/16 Amp, 230 V complete all as specified and directed.

S&F in replacement plug top metallic 3 pin, 20 Amp, 230 V complete all as specified and directed.

S&F in replacement gun metal non return valve heavy duty 15mm dia complete all as specified and directed.

S&F in replacement prepainted inspection plate rounded in two pieces made out of 22 gauge MS sheet and with fixing space for indicating lamp of any type and make of geyser 25 ltrs capacity including fixing screws complete all as specified and directed.

S&F in replacement prepainted inspection plate rounded in two pieces made out of 22 gauge MS sheet and with fixing space for indicating lamp of any type and make of geyser 50 ltrs capacity including fixing screws complete all as specified and directed.

S&F in replacement of fusible plug chromium plated brass (ISI marked) suitable for any type of geyser complete all as specified and directed.

S&F in replacement outer cell for 25ltr capacity geyser vertical or horizontal type including top and bottom covers plate complete all as specified and as directed.

S&F in replacement outer cell for 50ltr capacity geyser vertical or horizontal type including top and bottom covers plate complete all as specified and as directed.

Supply only gasket with stud for aperture assembly of any type geyser complete all as specified and directed.

Supply only safety pressure/air lock valve suitable for geyser 25/50 Ltrs capacity complete all as specified and directed.

Unitech India

Hindustan Power Corporation

Instrumentation and Electric Works