Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.0 LAccepted-AOC WARD NO 14 PARASIA PO PARASIA DISTT CHHINDWARA M P PIN NO 480441 | PARASIA | CHHINDWARA | MADHYA PRADESH | 480441 | ₹4.0 L | L1 | Accepted-AOC Bidder is L1 and has quoted lowest item rates overall |
| 2 | L2₹4.2 L+₹19,133.32 (4.81%)Rejected-Finance | ₹4.2 L+₹19,133.32 (4.81%) | L2 | Rejected-Finance Quoted higher rate |
| 3 | L3₹4.3 L+₹31,910.71 (8.02%)Rejected-Finance | ₹4.3 L+₹31,910.71 (8.02%) | L3 | Rejected-Finance Quoted higher rate |
| 4 | L4₹4.5 L+₹55,106.58 (13.9%)Rejected-Finance BEHIND FOOTBALL GROUND RAWANWARA PARASIA DISTT CHHINDWARA M P | CHHINDWARA | MADHYA PRADESH | 480441 | ₹4.5 L+₹55,106.58 (13.9%) | L4 | Rejected-Finance Quoted higher rate |
| 5 | L5₹4.9 L+₹89,507.24 (22.5%)Rejected-Finance | ₹4.9 L+₹89,507.24 (22.5%) | L5 | Rejected-Finance Quoted higher rate |
Tender Value
₹6.6 L
EMD Value
₹8,200
Closing Date
8 Aug 2026, 6:00 pmClosed
Staff Officer (Civil), Pench Area
Staff Officer (Civil), AGM Office, Pench Area, P.O. Parasia, Dist. Chhindwara (M.P.) 480441
Providing Car parking and charging shed for installation of New Charging station for EV vehicle at G.M. Unit under Area Unit of Pench Area.
2026_WCL_362660_1
pe3350-civ-s-e026-2026-27
Open Tender
Civil Works - Others
Percentage
45 days
PENCH AREA PARASIA
As Per NIT
3 documents required · 3 mandatory
₹8,200
3 Sept 2026
28 Jul 2026
10 Aug 2026
28 Jul 2026
8 Aug 2026
29 Jul 2026
28 Jul 2026 - 1 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m All kinds of soil. | 25.57 | Cum | 188.5 | ₹4,819.95 |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) | 4.63 | Cum | 5,608.05 | ₹25,979.29 |
| 3 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 2,547.04 | kg | 98.45 | ₹2,50,756.09 |
| 4 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 181.5 | sqm | 572.3 | ₹1,03,872.45 |
| 5 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm) . | 16.5 | mtr. | 382.3 | ₹6,307.95 |
| 6 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work. | 100 | Sqm | 98.75 | ₹9,875 |
| 7 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with fine sand etc. allcomplete as per the direction of Engineer-incharge. | 192 | Sqm | 800.45 | ₹1,53,686.4 |
| 8 | Total impact of GST for the purpose of CTC | 1 | Nos | - | - |
stage.html
html • 0.05 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 1.96 MB
BOQ_375569.xls
BOQ • 0.27 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .