17/EUDC-Maha/LESA T.G./2024-25

Amount

Safe Loading, carriage & unloading of following material from Central store and JE store to work site.

ST Pole 11 Mtr long

11/0.4KV 400 KVA T/F

11/0.4KV 630 KVA T/F

LT XLPE AL Cable 1x400/600 sqmm

ACSR Weasel Conductor.

11 KV Pin Insulator with pin

GI Wire 6 Swg

MS Earthing Rod

Fabrication erection of substation type double pole on ST pole 11Mtr along with fixing of necessary clamp, accessories required of MS channel on top dropper with arrangement of fixing of 3 Nos pin insulator as per RESPO specification & direction of E/I.

Providing, fabrication and fixing of DO Fuse Set.

Providing, fabrication and fixing of 11 TPMO Set.

Laying of LT Cable 1x240/400 sqmm with suitable size of Al lug. All material provided by department. Except Alu. Lugs

Construction of Masonry type Distribution Pillar box with first class brick ballast cement, coarse sand, local sand, brick ballast and MS Round bar of 10 mm dia including supply and mounting of 04 nos. Straight MS Angle 50x50x6x750 mm-3 nos., Henley type tailless fuse units 500 Amps. 650 Volts 3 no. for incoming and other for outgoing, Copper bus bar 4 nos. 1000x50x6 mm with locking arrangement made of 18 SWG BP Sheet (All the material will be arranged by the contractor)

Rectangular wiremess pel fencing of 11/0.4 KV S/S shall be made as per site requirement not exceeding 3 meter height fabrication with 45x45x5 mm angle the frame should also have 1 no. Horizontal runner of MS flat 40x5 welded in middle to support the wiremesh. Rectangular welded type wire mess of size 50x25mm made of 12 S.W.G. wiremesh shall be welded all along the periphery of the frame as well as on horizontal runner to give extra strength of welding to wiremesh welded on the frame. Diagonal bracing of all the frame panel will be welded with Ms flat of size 25x3mm to support as per RESPO specification & direction of E/I. The vertical angles shall be grouted 1/6 of its length in ground with 1:2:2 ratio of cement, coarse sand & concrete provision of gate for entry should be provided with pad lock.

Pipe type earthing of transformer with 20 mtr deep borring and providing Jindal make GI pipe “B" Class 1” dia (20 mtr GI pipe) and GI strip 25x5 mmx6 meter long attached with clamps, L piece, nut & bolts and GI pipe cap. All material shall be supplied by the contractor.

Supply and fixing of clamps.

Nut & bols

Alu Lug 630 sqmm

Copper L-Piece

MS angle 65x65x6mm

Danger board complete

Sandry Item

Ordinary earthing of pole by MS earth Rod 2500 mm long & GI strip of size 40x5 mm as per RESPO Schedule. Earth rod, GI strip, nut bolts shall be provided by the contractor.

Grouting of pole with the help of Cement, Course sand and brick ballast.

Painting of pole by two coat of red oxide and two of Al. Enamel paint. (All material arranged by the contractor)

Installation & commissioning of 11/0.4 KV 400 KVA T/F including its connection from 11 KV line and LT line mounting of copper L-Piece providing and fixing of Al crimping Lugs, all material provide by department except nut bolt and copper L-Piece.(All the material except transformer will be arranged by the contractor)

Dismantling of existing 250/400 KVA T/F by Opening of all the HT/LT Connection and its safe carriage upto JE Dump store /ESC Daliganj.

Installation & commissioning of 11/0.4 KV 630 KVA T/F including its connection from 11 KV line and LT line mounting of copper L-Piece providing and fixing of Al crimping Lugs ,all material provide by department except nut bolt and copper L-Piece.(All the material except transformer will be arranged by the contractor)

A M and E ELECTRICALS

M/S BALA JI ENTERPRISES

DEEPAK ENGINEERING

Bidder Name

DEEPAK ENGINEERING

M/S BALA JI ENTERPRISES

A M and E ELECTRICALS

LUCKY ENTERPRISES