REPAIR/REPLACEMENT OF FLOOR AND WALL TILES, REPAIR AND FITTINGS OF STONE AND TILE, SILICON FILLING, REPAIR/REPLACEMENT OF APRONS, CHEQUERED TILES AND MISC B/R WORKS AT MANEKSHAW CENTRE UNDER AGE B/R (P) MC OF GE (SOUTH) DELHI CANTT-10

Amount

M&L for non staining and non streaking sealant of Dow Corning (789 or 991 HP) & backing rod in joints of width 12 mm to 20 mm of ACP/Glass panel of vertical/horizontal positions making the joints leak proof including taking out of old material cleaning and racking out of joints complete all as specified and as directed.

S&F in repairs sun shading device comprising of powder coated Aluminium fins of Aerofoil shape blades, connected together with extruded heavy duty aluminium Support Arm, attached to main mullions with stainless steel bracket, including sealing the junctions of bracket connecting the sun breaker assembly system with Structural Glazing using approved water proofing system & silicon sealants, spacers, stainless steel bolts, aluminium flashings including fixing in position, sealing the joint with Structural Glazing using colourless imported special quality structural silicon adhesive sealant, etc. complete all as specified and as directed. Note for Srl item Nos. 1 & 2 : The work is to be executed at different height/stored of the building and necessary scaffolding etc are to be made for proper exeuction of work. The rate quoted by the tenderer are deemed to be included for the above provision and nothing extra on this account shall be paid by the department.

M&L for repair to cracks, joints of Gypsum ceilling board using Gypsum board jointing paper tape and gypsum compound complete as specified and as directed.

M&L for painting lines, dashes, arrows, letters etc on road pavement and the like exc 10 cm wide with road marking paint white or golden yellow complete all as specified and directed.

S&F in repairs false ceiling of 12.5 mm thick tapered edge gypsum board conforming to IS 2095 including providing and fixing of frame work made of special sections power pressed from M.S. Sheet and galvanised in accordance with zinc coating and consisting of angle cleat of size 25 mm wide x 1.6 mm th with flange of 22 mm and 37 mm at 1.20 M C/C, Angle fixed to the ceiling with dash fastener 12.5 mm dia x 40 mm long with 6 mm dia bolts to the angle hangers of 25x25x5 mm running @ 1.20 M C/C to which the ceiling secton 0.5 mm th bottom wedge of 80 mm with tapered flanges of 26 mm, shall be fixed in a direction perpendicular to GI Channel with connecting clips made out of 2.64 mm dia x 230 mm long GI wire at every in including fixing the gypsum board with ceiling section and perimeter channel 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long the perimeter of ceiling fixed to wall/ partition with the help of rawl plug at 450 mm c/c with 25 mm long screws @ 230 mm internal including jointing and fixing to a flush finish of tapered and square edge of the gypsum board with filler, paper tapes including making opening for light fittings, AC grills, diffusers cut outs made with frame of perimeter channels complete in plain horizontally/ vertically location incl applying two coats of plastic emulsion paint over a coat of approved primer on gypsum board false ceiling horizontally/ vertically (at ceiling height upto 8 mt. appx ) complete all as specified and as directed.

All as per Srl item No. 5 above, but but in circular locations.

Extra for providing 150 mm high cove with special section and specifications as in Srl Item No. 5 above.

S&F in repairs service trap doors of size 600 mm x 600 mm by using 12.5 mm th gypsum board conforming to IS-2095 including providing and fixing frame work made of special sections power pressed from M.S. sheet and galvanised in accordance with zinc coating including providing edge bit and necessary scaffolding etc. complete all as specified and as directed.

M&L in replacement stainless steel (SS) 304 grade any section like tee, angle hollow pipe and square / rectangular tube flat plates ,nut bolts of glass railing etc fixed with necessary fitting ss screws nut bolts fastners etc including necessary cutting drilling profile cutting of components to required length / width and shapes / profile and smooth grinding / maching of edges / faces / all welding joints including buffing and polishing complete all as specified and as directed.

Dismantling floor heath or wall tiling including cement mortar bedding but not backing removing services and tiles to stone and rubbish off the premises complete all as specified and as directed.

M&L for 15mm thick scred bed in CM 1:6 as in under flooring/dado complete all as specified and as directed.

Material and labour for coloured vitrified tiles 600x600mmx10mm thick as in flooring in patches including filling joints with neat cement slurry mixed with pigment to match the colour of the tiles complete all as specified and as directed.

M&L for 10 mm thick rendering on brick/concrete surfaces in CM (1:3) as screeds in back of tiles in dado complete all as specified and as directed.

M&L for glazed coloured ,joint free ceramic tiles in vertical surfaces of size 450x 300 x7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for prepration of old treated concrete surface of kerb stone of any description over 10cm girth or width,not otherwise specified and applying two coats of synthetic enamel paint complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings n.exc 15 cm thick below or above ground level (unreinforced) complete all as specified and as directed.

M&L for cement concrete type B-0, 1:2:4, using 12.50mm graded stone aggregate as in copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded for chamfered angles and throating complete all as specified and as directed.

M&L for Screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in CM 1:6 complete all as specified and as directed.

M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick set in and jointed with grey cement and pigments complete all as specified and as directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L for Brickwork with sub- class ‘B’ bricks, straight or curved on plan exc 6 m mean radius, set and jointed in CM 1:6 complete all as specified and as directed.

M&L for 15 mm thick rendering with Readymix plaster (as per manufacturer's instructions) on fair faces of brick work or concrete surfaces finished even and smooth surface without using extra cement on wall and ceiling of up to four storied bldg complete all as specified and as directed. Notes :- 1. Make of readymix plaster shall be Birla Aerocon/Ultratech Readiplast/ACC Accoplast/Fosroc Chemical (India) Pvt Ltd Renderoc and as approved by GE. 2. The readymix plaster shall be procured directly from the manufacturer or from their authorised dealer. 3 The contractor shall produce original purchase voucher alongwith test certificate of readymix plaster while claiming RAR/ Final Bill. 4. The Engr-in-Charge shall verify the genuineness of these purchase vouchers before endorcing.

M&L for carefully removing the old joint filling material and filling the epxoy based joint filling material for stone flooring/tile joints complete all as specified and as directed.

Note:- The contract sum shall be after deducting the amount of Credit shown in Credit Schedule of this Tender.

Chaudhary Constructions

JINDAL ENTERPRISES

M/S MANISH KUAMR SINGH

verma enterprises

M/S.M.S.Devi.Const.Co