Renovation of Zonal Marketing Office, Bhopal

Amount

CIVIL WORK

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor,etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above Floor V Level upto to floor IX level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineerin-Charge. (The payment of RCC band and reinforcement shall be made for seperately).

STONE & MARBLE WORK

Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters, door window, sills, jambs, soffits, facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand) joints treated with white cement mixed with matching pigment, epoxy touch ups, including rubbing , curing , moulding on all exposed edges and polishing to edge to give high gloss finish etc. complete at all levels (a) Jet Black Granite 18mm thick Area of slab Upto 0.50 sqm

Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters, door window, sills, jambs, soffits, facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand) joints treated with white cement mixed with matching pigment, epoxy touch ups, including rubbing , curing , moulding on all exposed edges and polishing to edge to give high gloss finish etc. complete at all levels (a) Jet Black Granite 18mm thick Area of slab over 0.50 sqm

Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smoothGranite Stone of approved shade

WINDOW & DOOR

Providing and fixing factory made uPVC white colour fixed glazed windows/ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), , uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable."9.147B.1 Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.)

Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured).

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile B 10.14.1.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately)

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineerin- Charge

Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing. 30 mm thick plain PVC door shutters

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Float glass panes 5.5 mm thick glass panes

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.0 mm thick

DOOR & WINDOW HARDWARES

Providing and fixing Cylindrical Lock with Key of Stainless Steel (316 Grade)of approved quality with necessary screws etc. complete(Kich ,Dline, IVY Make)

Providing and fixing double action hydraulic floor spring of Stainless Steel (316 Grade ), having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing .(Dline,Kitch , IVY ,Godrej Make )

Providing and fixing Pull Handle(316 Grade)Back to back over Glass Door with necessary SS screws of Kich Make . complete as per direction of Engineer in charge Ø 38 mm x 750 mm. Model .No.PH3830 (Dline,Kitch , IVY ,Godrej Make )

Providing and fixing Pull Handle(316 Grade)Back to back over Glass Door with necessary SS screws of Kich Make . complete as per direction of Engineer in charge 25 mm x 600 mm Model .No. PH2524 (Dline,Kitch , IVY ,Godrej Make )

Providing and fixing Patch Lock (316 Grade)over Glass Door with necessary SS screws of Kich Make. complete as per direction of Engineer in charge Model .No. PF14S (Dline,Kitch , IVY ,Godrej Make )

BOARD PARTITION & PANELLING WORK

Providing and fixing in position full height partition work in frame work of ms square tube 50mm x 50mm x 16 gauge including two coat of primer, at 600mm c/c horizontally and 1200mm c/c vertically comprising of M.S Section, complete as per Direction of Architect / Engineer-in-charge with 12 mm th WPC(Wood Polymer Composite) on both sides finished with Laminate of approved make and 1mm thick StainlessSteel finish lamination in skirting area approved laminate . (Partition to be measured one side for both side area excluding door opening for Billing purpose).

Providing and fixing, in position concealed G.I. section for wall paneling using board of required thickness fixed on the 'W' profile (0.55 mm thick) having a knurled web of 51.55 mm and two flanges of 26 mm each with lips of 10.55 mm, placed @ 610 mm C/C in perimeter channel having one flange of 20 mm and another flange of 30 mm with thickness of 0.55 mm and web of length 27 mm. Perimeter channel is fixed on the floor and the ceiling with the nylon sleeves @ 610 mm C/C with fully threaded self-tapping dry wall screws. Board is fixed to the 'W' profile with 25 mm countersunk ribbed head screws @ 200 mm C/C., all complete as per the drawing & directions of engineer-in-charge, the joints of the boards are finished with specially formulated jointing compound and 48 mm wide jointing tape to provide seamless finish. Tapered edge calcium silicate board made with calcareous & siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with compressive strength 225 kg/ sq.cm, Bending strength 100 kg/sq.cm. 10mm thick

Providing & Fixing of Full Height Aluminium Partition-Single glazed modular system upto 8Ft Height consist of Aluminium section of 40 * 25mm thick. All sections duly anodised up to 15-20 microns with 6063-T6 grade and required accessories ie glass to glass aluminium I sections, T section & 90 degree sections & Glass packing to adjust the floor level. Ceiling profile, Floor profile and wall profile are 25 mm visible face and 40 mm wide with 12 mm thick toughened glass & insertion of silicon/tep gasket to adhere the glass firm & airtight. Note :- Glass Shall be paid Separately (Make:- Otic/Linder/Alloy)Rate shall be include th Cost of framework to hold glass above false ceiling

CIVIL WORK

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :.

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.

Providing and laying Vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm

Providing & fixing Cork-comfort Naturals or approved equivalent Cork wood flooring certifying to EN655 Class33 (ISO10874), floating flooring, fire resistance conforming to EN13501-1 (BflS-1) & slip resistance classification as per EN13893-DS.Thickness of plank 10.5mm & size minimum 905mm x 295mm x10.5mm or 1220mm x 140mm x 10.5mm. Flooring to have High Performance Surface with HPS Varnish, hard-wearing surface 0.5mm, genuine cork veneer 0.8mm, flexible & insulation corklayer-1.7mm, high density fibre board with cork-loc technology-6mm, integrated cork underlay 1.5mm/3mm.The make to be European as conforming to general properties EN14085 & EN655, laying instructions include laying with vapour barrier & 2mm PE foam. Properties of product to include impact sound reduction as per ISO140-8 with specification for impact sound reduction-dB16.To be installed as per architects specifications & drawings by a trained and authorised team like that of CCIL.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm

Providing and laying 9mm thk super premium range and Glazed Vitrified tiles Matt finish premium range approved Vitrified Tiles for toilets of reputed approved make of size 600 x 600 x 9mm thk (Min) laid in required pattern on an avg. 25 to 30mm thk bed of 1:4 cement mortar (1 cement : 4 coarse sand) in proper line and level including neat white cement float, filling joints with neat cement slurry, of appropriate matching colour, curing and cleaning complete.Tiles shall be free of any variation in colour or texture. The cost to include sealer treatment of Aqua mix brand. The rate shall be inclusive of application chemicals and Roffe and levelling with PCC wherever level difference is observed to attain a uniform level all throughout the premises. Make:-Somany, Kajaria, Orientbell, Varmora

FALSE CEILING WORK

Providing and fixing Gl Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing 'C' wall angle of size 20x30x20 mm made of 0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm center to centre, suspending the main C carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1000 mm c/c. Inverted triangle shaped Spring Tee having height of 24 mm and width of 34 mm made of Gl steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive), fixing with clip in tiles into spring T with : 12.54.2 GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5 mm thick with 25 mm height, made of G I sheet having galvanizing of 100 gms/ sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation.

Providing & fixing false ceiling at all height including providing & fixing of framework made of special section, power pressed from M.S. sheets and galvanised with zinc coating 120 gms./ sq.m ( both side inclusive) as per IS : 277 and consisting of angle cleat of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm, at 1200mm c/c, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25 x10 x0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I chanels 45 x15 x 0.90mm running at the spacing of 1200mm c/c, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26mm each having lips of 10.5mm, @ 450mm c/c, shall be fixed in direction perpendicular to G.I intermediate channel with connecting clip made out of 2.64mm dia x 230mm long G.I wire at everey junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/ partitions with the help of Rawl plugs at 450mm centre, with 25mm long dry wall screws @ 230mm interval, including fixing of 12mm thick Non-flammable and fire resistant of Class A1 grade Magnesium Oxide Board (density < 1000 Kg./ cu.m) to ceiling section and perimeter channels with the help of dry wall screws of size 3.5 x25mm at 230mm c/c, including jointing & finishing to a flush finish of tapered and sqaure edges of the board with recommended jointing compounds, jointing tapes, finishing with jointing compounds in three layers covering up to 150mm on both sides of joints and two coats of primer suitable for boards, all as per manufacture's specification and also including the cost of making opening for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specificaton and direction of the Engineer in charge but excluding the cost of painting. Anutone/ RITE/ Saint Gobain/ NSA

WALL FINISHING WORK

12 mm cement plaster of mix : 1:6 ( 1 cement : 6 coarse sand )

15mm cement plaster on rough side of single or half brick wall of mix 1:6 (1 cement : 6 coarse sand )

6 mm cement plaster 1:3 ( 1 cement : 3 fine sand)

White washing with lime to give an even shade : New work (three or more coats)

Providing and applying Acrylic wall putty of approved brand and manufacturer,in two coats to a average thickness of 1 mm, over the cement plastered wall surface to prepare the surface even and smooth(The rate quoted is inclusive of all operation of removal of dust, dirt and forign metal etc. before applying the putty and preparing the dried surface with fine emery paper fit to receive the paint etc.) complete.

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Supply of manually operated roller blinds as per approved shade L1-S1 Linen of MAC or approved equivalent make HARDWARE TOP TUBE : Made of extruded aluminium 38 mm Dia. With wall thickness of 1.2 mm with spline adoptable to accommodate clutch.CLUTCH MECHANISM : Moulded plastic having antifriction additive with Glass fibre reinforcement. Should have a minimum lifting capacity of 8 lbs OPERATING CHAIN : #PVC ball chain adoptable to the clutch pitch for smooth lifting & lowering of blind.LOAD TUBE : 38 mm Extruded aluminium wall thickness :1.2 mm + / - 5% Bonding ( Fabric > Tube ) : 15 mm wide double sided adhesive tape of 3M Bottom Bar : aluminium extruded box section with powder coatecd finish matching the roller fabric -Min weight to be 365 gms / Lmr for a perfect fall of fabric to avoid warpage / floating.Instalattion to be insert type with end caps. Screens to be with 5% Openness Composition 22% Polyester + 78% PVC Wieght 475 gramsper sq.mtr. Thickness 0.68mm

DISMANTLING & DEMOLISHING WORK

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 3.0 kM lead :NOTE : Demolishing/dismantaling of the existing Flooring, dado, tiling, partitions, false ceiling, Platforms, counters, stone or brick work, plaster, bunds, walls, doors, windows, fans, lighting fixtures, cables & wires, AC ducts & grills, AC assessories, Fire pipes, Sprinklers, Electrical Assessories, table & credenzas, storage units of all types, furniture & fixtures, workstations, Interior items, fixed & loose items etc and any other material required for working on site & compliance of all the activities on site including removal of debris from site including removing the same with utmost care to ensure no damage in case of fixtures & fittings & handing over the same to the NRL or shifting the same to a new desired place and re-fixing the same if desired under the instructions and directions of the Consultant.

Demolishing brick work manually/ by mechanical means includingstacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.)

Dismantling aluminium/ Gypsum partitions, doors, windows, fixedglazing and false ceiling including disposal of unserviceable surplusmaterial and stacking of serviceable material with in 50 meters leadas directed by Engineer-in-charge.

Dismantling tile work in floors and roofs laid in cement mortar The dismantled shall be taken away by the agency and site will be cleared off from rubbish/malba etc. complete as per direction of Engineer-in-charge. ( The rate include the process of demolishing work and site clearacne)

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved dumping ground within plant or as approved by Engineer-in-charge,

Description of Work / Item(s)

Amount

SANITARY FIXTURES

Supply, Installation and commissioning approved make wash down wall mounted EWC of size 420 x 580x410 mm conforming to IS:2556 (Part 16)-2002 with 'P' or 'S' trap with concealed flush cistern fixed in wall(Concealed Cistern: Size: 564x480x78mm (Cat. No.: 120844 ) with Press panel Somany Make including, ultra solid seat cover of approved make with rubber buffer and cap all of approved make etc. complete for finished item of work in all respects: Model.No.ATRIA -120526 of Somany (Make: Somany/Jaquar/Roca/Cera/Kohler)

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap

Providing & fixing Over the Counter Wash basin of size 450x345x160mm mm, 32mm C.P. Waste coupling Model.No.Bello 110448 of Somany (Make: Somany/Jaquar/Roca/Cera/Kohler)

Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink with drain board- 510x1040 mm bowl depth 250 mm

SS Wall Mounted Grab Rail system having Corrosion Resistant High Grade AISI 316 Stainless Steel in Handicaped Toilet over Wall Mounted (Q-Rail , Kich Make) consist of One nos of size Ø 25mm x 300 mm fit to site at.complete with all necessary

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineerin- charge.

CP & SS BATHROOM FITTINGS

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineerin- charge.

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter

Providing and fixing towel rail complete with brackets fixed with CP brass screws PVC sleeves etc. Complete. 600 mm long .Model No- ACN-1111 BNM , of Jaquar make

Supplying & Fixing of CP soap dish Holder fixed to the wall with PVC rubber plug with CP brass screws Model No- ACN-1131 N , of Jaquar make

Supplying, installing, testing and commissioning approved make 15mm CP health faucet with CP flexible tube 1.0m long, CP crutch, nozzle & 2 way Bib Cock with wall flange etc.,complete. The water flow rate is 6 ltrs/Min Jaquar Model No 573 & 041

Providing and fixing Braided hose with Two 15mm Nuts & Rubber washers without Nipple : Model No. ALD-805B of Jaquar 45 cm length

Providing & fixing cockcroch trap S.S. grating of approved design for floor traps etc. including setting in floor with cement mortar. 100 mm dia

Providing and fixing 900x600 mm beveled edge frameless mirror of 6 mm thick superior glass (Saint Gobain) and polished with cerium (IV) oxide complete including all hardware to fix it with the wall to complete the work.

SOIL & WASTE PIPE

Providing and fixing soil, waste and vent pipes :100 mm dia: Hubless centrifugally cast (spun) iron pipes epoxycoated inside & outside IS:15905

Providing and fixing soil, waste and vent pipes : 75mm diameter : Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905

Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/ cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5 mm flat of specified shape, projecting 75 mm outside the wall surface and fixed on wall with 4nos, 6mm dia expansion hold fasteners, including drilling necessary holes in brick wall/ CC/ RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30 mm x1.6 mm galvanised M.S. flats of specified shape and of total length 420 mm and shall be fixed with M.S. nuts, bolts, & washers of size 25x6 mm, one bolts on each side of the pipe. Total bracket length 810 mm of approved shape and design

Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15904

100 mm dia

75 mm dia

Providing and fixing plain bend of required degree. Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905

100 mm dia

75 mm dia

Providing and fixing heel rest sanitary bend Sand cast iron S&S as per IS - 3989

100 mm dia

75 mm dia

Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. Sand cast iron S&S as per IS - 3989 100x100x100 mm

Providing and fixing single equal plain junction of required degree : Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 75x75x75 mm

Providing and fixing single unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : Sand cast iron S&S as per IS - 3989 100x100x75 mm

Providing and fixing terminal guard : Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905, 100 mm

Providing and fixing collar : Sand cast iron S&S as per IS - 3989 100 mm

Providing and fixing collar : Sand cast iron S&S as per IS - 3989 75 mm

Providing and fixing shielded coupling for Hubless centrifugally cast iron pipe SS 304 grade coupling with EPDM rubber gasket100 mm

Providing and fixing shielded coupling for Hubless centrifugally cast iron pipe SS 304 grade coupling with EPDM rubber gasket 75 mm

Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter : 100 mm

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905

100 mm inlet and 100 mm outlet

100 mm inlet and 75 mm outlet

WATER SUPPLY

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall :

15 mm dia nominal bore

20 mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall

15 mm dia nominal bore

20 mm dia nominal bore

25 mm dia nominal bore

32 mm dia nominal bore

40 mm dia nominal bore

Description of Work / Item(s)

Amount

SUPPLY OF FURNITURE

WRITING TABLE-1500 x 800 x 750- Providing and fixing Writing Table, overall dimensions are 1500 mm length, depth is 800 mm and height is 750mm in the combination of Full Germany Melamine Prelaminated Particle Board, Shannon Oak Color and Epoxy Metal Leg. Table top designed with 25mm thick in 1500mm length, 800mm depth, White Color Epoxy Metal Leg with dimension of 55mm*790mm*700mm, Modesty made of 18mm in trapezium shape. Table top with two aluminium wirecap, Table top with 4 sides 2mm flat PVC edge banding.

SIDE CABINET -900 x 400 x 750- Providing and fixing Side Cabinet, overall dimensions are 900 mm length, depth is 400 mm and height is 750mm in Full Germany Melamine Prelaminated Particle Board ,Shannon Oak Color . Cabinet top designed with 25mm thick in 900mm length, 400mm depth. Side, Shelf, Door Panels in 18mm thickness. Cabinet top with 3 sides 2mm flat PVC edge banding. Metal handle, 1 adjustable shelf and 1 lock.(1- SIDE CREDENZA AND 3 BACK CREDENZA)

MOBILE PEDESTAL -400 x 545 x 600 Providing and fixing Mobile Pedestal, overall dimensions are 400 mm length, depth is 545 mm and height is 600mm, top designed with 25mm thick rectangular shape Germany Melamine Prelaminated Particle Board,Shannon Oak Color , Side, Drawer Handle Panels made of 18mm Thick Germany Melamine Prelaminated Particle Board. Metal handle, 1 lock and with full extension ball bearing slides

CONFERENCE TABLE- 1500 x 700 x 750 Providing and fixing Conference Table, overall dimensions of table are 2400 mm length, depth is 900 mm and height of the table is 770mm, table top designed with 43mm thick rectangular Germany Melamine Prelaminated Particle Board ,Shadow Wall shade , Side made of 25mm thick Germany Melamine Prelaminated Particle Board, Modesty made of 18mm Thick Germany Melamine Prelaminated Particle Board, Table top with 2 sides Half-moon T-moulding.

CONNECTION TOP ON EITHER SIDES OF CONFERENCE TABLE -1800 x 900 x 750 Providing and fixing Half-Round Conference Table, overall dimensions of table are 1840 mm length, depth is 800 mm and height of the table is 770mm, table top designed with 43mm thick half-round shape Germany Melamine Prelaminated Particle Board ,Shadow Wall shade ,Side made of 25mm thick Germany Melamine Prelaminated Particle Board, Table top with 1 side Half-moon T-moulding.

EXECUTIVE TABLE -1600 x 700 x 750 Providing and fixing Writing Table, overall dimensions of table are 1800 mm length, depth is 900 mm and height of the table is 770mm, table top designed with 43mm thick D-shaped Germany Melamine Prelaminated Particle Board,Shadow Wall shade , Side made of 25mm thick Germany Melamine Prelaminated Particle Board, Modesty made of 18mm Thick Germany Melamine Prelaminated Particle Board, Table top with 2 sides Half-moon T-moulding.

CONNECTION TOP - 1200 x 700 x 750 Providing and fixing Connection Top, overall dimensions of table are 1050 mm length, depth is 1100 mm and height of the table is 770mm, table top designed with 43mm thick Germany Melamine Prelaminated Particle Board , Shadow Wall shade ,76mm diameter of metal leg, Table top with 1 side Half-moon T-moulding.

SIDE RETURN- 405 x 475 x 675-Providing and fixing Executive Side Cabinet, overall dimensions of cabinet are 1200 mm length, depth is 485 mm and height of the cabinet is 690mm, cabinet top designed with 43mm thick rectangular Germany Melamine Prelaminated Particle Board ,Shadow Wall shade , Side made of 25mm thick Germany Melamine Prelaminated Particle Board, cabinet top with 2 sides Half-moon T-moulding. Metal Handle and 1 lock. 2 18mm thickness adjustable shelves. Metal shelf support. 18mm thickness Door Panels. (1- SIDE CREDENZA AND 1- BACK CREDENZA)

FIXED PEDESTAL-400 x 415 x 450-Providing and fixing Mobile Pedestal, overall dimensions are 460 mm length, depth is 560 mm and height is 680mm, top designed with 25mm thick rectangular shape Germany Melamine Prelaminated Particle Board, Side, Drawer Handle Panels made of 18mm Thick Germany Melamine Prelaminated Particle Board. Metal handle, 1 lock and with full extension ball bearing slides

SIDE RETURN- 1200 x 400 x 750-Providing and fixing High Glass Cabinet, overall dimensions are 800 mm length, depth is 465 mm and height of the cabinet is 2000mm, top designed with 25mm thick Germany Melamine Prelaminated Particle Board,Shadow Wall shade , Glass Door with 5mm thick Black Color and metal handle, Side,Shelves and Door made of 18mm thick Germany Melamine Prelaminated Particle Board. Soft-closing hinges and metal shelf support. 3 adjustable shelves. Top with 1-side Half-moon T-moulding

Providing and fixing of moduar Desking System consist of following specifications.

WORKTOP: Worktop to be of 25mm thick prelam particle board with 2mm thick PVC hot pressed edge bending all across the worktop. Worktops to be supported on CRCA powder coated legs with finished work surface at 720-750 mm from ground level. All worktops to have standard PVC wire manage.

UNDERSTRUCTURE FRAME- Understructure Frame to be made up of 50x 50x1.2 mm thick Powder Coated CRCA Steel hollow section leg support in C shape - The legs will be joined with 20x 40x1.5/ 25x 25 x1.5 mm thick horizontal Tie section to support and strenthen the system.The legs will have Nylon cap with integrated glide screw to level floor undulations

CABLE BEAM: Specially designed cable beam are the integrated part of system giving concealed wire managements facility. Cable beam are made up of 0.8 mm thick CRCA powder coated steel with snap on cover section for mounting electrical and data. The approximate size of the cable beam to be 250mmx 50 mm .The Beam Should be fixed properly to structure.

Verticle Cable Riser- Specially designed verticle cable riser for raising the wires from floor/False Ceiling to cable beam is made up of 0.8 mm thick CRCA powder coated steel with snap in cover for easy access to wiring. The Verticle cable riser will have crosssection of 80x80mm with one snap on cover.

SCREEN- The system will have one Magnetic Fabric Screen mounted on Powder Coated Aluminium Die-Casted Studs and made up of 8+8 mm mdf and G.I sheet of 0.6 mm Thick

Keyboard trays- Providing & Placing Keyboard tray of size 510x240x75mm made up of 1.2mm thick CRCA steel sheet duly powder coated. The Keyboard tray runs on ball slides for smooth movement.

CPU Trolley- Providing & Placing CPU trolley of 240mm height with adjustable width from 220 to 320mm width made of 1.6mm thick CRCA steel sheet duly powder coated with 2 Nos. lockable castors & 2 Nos. non lockable castors.

Three Drawer Pedestal-Mobile Drawer unit to be made up of 18 mm thick pre laminated particle board interior grade of approved make having 2 no of drawer of equal size at top & 1 no filing unit at bottom. The internal drawer to be made up of 12 mm pre laminated board and back to be made up of 8mm pre laminated board. Each drawer will have front handles and locking arrangements with central locking mechanism with keys . The drawers will run on telescopic channel.

1200X600 STRAIGHT IN LINE WORKSTATIONS ON SHARING BASIS.

1200X600 STRAIGHT IN LINE WORKSTATIONS ON NON-SHARING BASIS.

Modular Storage (Low height & Full height) out of 18mm thick PLPB of approved make. Finished in approved laminate comprising of shutters/ drawers, locks, handles etc. as per design.

RECEPTION TABLE-2535 x 1050/750 x 750 Manufacturing, supplying and placing in position of the reception table. Top of the table shall be made up of 25mm MDF edges duck nose edge finished with Inside radius, outside radius and depth shall be 600 for worktop, 300 mm counter top respectively. It shall have counter frosted glass10mm thick with diamond cut finish on the edges. Worktop height shall be 725mm and Counter height shall be 1050mm . The complete system is finished with PU high gloss .

2- SEATER SOFA -930 x 1470 x 900 Supplying two seater sofa sets. The sofa sets shall be completely made up powder coated internal metal frames. Seat support shall be in supplied with good quality webbing and quality injection moulded PU Foam . PU Foam should thick and soft with variable hardness .PU Foam finished with Upholstery as per image

3- SEATER SOFA -930 x 1960 x 900 Supplying Three seater sofa sets. The sofa sets shall be completely made up powder coated internal metal frames. Seat support shall be in supplied with good quality webbing and quality injection moulded PU Foam . PU Foam should thick and soft with variable hardness .PU Foam finished with Upholstery as per image

2- SEATER SOFA 740 X 1370 X 800 Supplying two seater sofa sets. The sofa sets shall be completely made up powder coated internal metal frames. Seat support shall be in supplied with good quality webbing and quality injection moulded PU Foam . PU Foam should thick and soft with variable hardness .PU Foam finished with Upholstery with Chrome framing as per image

3- SEATER SOFA 740 X 1910 X 800 Supplying two seater sofa sets. The sofa sets shall be completely made up powder coated internal metal frames. Seat support shall be in supplied with good quality webbing and quality injection moulded PU Foam . PU Foam should thick and soft with variable hardness .PU Foam finished with Upholstery with Chrome framing as per image

CENTER TABLE-900 x 450 x 400 A contemporary looking coffee table in high grade sheesham wood with 6mm glass top as per image .

The Seat Cushion of the chairs should be pressed on 12mm hot press moulded ply ,Back- Mesh with PP Structure. The base seat cushion of the chair should be made up PU Foam (H.D) , D -45 kg/m3 , H-20 and PP Structure affixed with mesh . The polyurethane foam base should be covered with Leatherette/fabric as per manufacturer’s shade card. The arms of the chairs should be in P.U . The Gas lift mechanism should be of Lift - 85 mm (TDC 152mm &BDC 67 mm) The pedestal should be Revolving Pedestal - Chrome Plated Steel base 5 prong with 3 piece bellow. with Black Nylon - Twin Wheel Pin castor .The mechanism should be of Torsion Bar - Single point control. Provides maximum adjustability and scope for comfort. Seat & Back moves in same direction. 1 position locking with anti shock feature.Size H 1110 X W650 X D 650 (=/- 10 MM)

The Seat and Back Cushion of the chairs should be pressed on 12mm hot press moulded ply. The base seat cushion of the chair should be made up PU Foam (H.D) , D -45 kg/m3 , H-20 and back cushion should be made up of PU Foam (H.D) , D -45 kg/m3 , H-21. The polyurethane foam should be covered with Leatherette as per manufacturer’s shade card. The arms of the chairs should be Adjustable Pad (P.U) + L Bkt (Chrome plated steel). The Gas lift mechanism should be of Lift - 85 mm (TDC 152mm &BDC 67 mm) The pedestal should be five legged Chrome plated steel frame. with Black Nylon - Twin Wheel Pin castor .The mechanism should be of Synchro Knee Tilt Size H 1130 X W720 X D 720 (=/- 10 MM

The Seat and Back Cushion of the chairs should be pressed on 12mm hot press moulded ply. The base seat cushion of the chair should be made up PU Foam (H.D) , D -45 kg/m3 , H-20 and back cushion should be made up of PU Foam (H.D) , D -45 kg/m3 , H-21. The polyurethane foam should be covered with Leatherette as per manufacturer’s shade card. The arms of the chairs should be Adjustable Pad (P.U) + L Bkt (Chrome plated steel). The base should be Fixed Type: CRCA oval side capsule pipe.Size H 955 X W650 X D 595 (=/- 10 MM)

The Seat Cushion of the chairs should be pressed on 15 mm plywood (Hot pressed). The base seat cushion of the chair should be made up PU Foam , PU Foam , D -45 kg/m3 , H-20 and back rest PU Foam , PU Foam , D -45 kg/m3 , H-20.The polyurethane foam base and back should be covered with Leatherette as per manufacturer’s shade card. The arms of the chairs should be Soft Cushion on Fixed Chrome plated Base . The Gas lift mechanism should be of Lift - 85 mm (TDC 152mm &BDC 67 mm) The pedestal should be Revolving Pedestal - Chrome Plated Steel base 5 prong with 3 piece bellow. with Black Nylon - Twin Wheel Pin castor .The mechanism should be of Torsion Bar - One position locking.Seat-Back movement ratio 1:3 in same direction Size H 1310 X W650 X D 650 (=/- 10 MM)

The Seat Cushion of the chairs should be pressed on 15 mm plywood (Hot pressed). The base seat cushion of the chair should be made up PU Foam , PU Foam , D -45 kg/m3 , H-20 and back rest PU Foam , PU Foam , D -45 kg/m3 , H-20.The polyurethane foam base and back should be covered with Leatherette as per manufacturer’s shade card. The arms of the chairs should be Soft Cushion on Fixed Chrome plated Base . The Gas lift mechanism should be of Lift - 85 mm (TDC 152mm &BDC 67 mm) The pedestal should be Revolving Pedestal - Chrome Plated Steel base 5 prong with 3 piece bellow. with Black Nylon - Twin Wheel Pin castor .The mechanism should be of Torsion Bar - One position locking.Seat-Back movement ratio 1:3 in same direction Size H 1130 X W650 X D 650 (=/- 10 MM)

The Seat Cushion of the chairs should be pressed on 13.5 mm single 'L' Ply (Hot pressed). The base seat cushion of the chair should be made up PU Foam , D -32 kg/m3 , H-20 and back rest PU Foam , D -28 kg/m3 , H-20 .The polyurethane foam base and back should be covered with Leatherette as per manufacturer’s shade card. The arms of the chairs should be Soft cushioning on plastic Handle over chrome plated obround tube . The Gas lift mechanism should be of Lift - 85 mm (TDC 152mm &BDC 67 mm) The pedestal should be Revolving Pedestal - Chrome Plated Steel base 5 prong with 3 piece bellow. with Black Nylon - Twin Wheel Pin castor .The mechanism should be of Torsion Bar - Single point control. Provides maximum adjustability and scope for comfort. Seat & Back moves in same direction. 1 position locking with anti shock feature.Size H 1110 X W650 X D 650 (=/- 10 MM)

The Seat and Back Cushion of the chairs should be 13.5 mm single 'L' Ply (Hot pressed). The base seat cushion of the chair should be made up PU Foam , D -32 kg/m3 , H-20 and back cushion should be made up of PU Foam , D -28 kg/m3 , H-20 The polyurethane foam should be covered with Leatherette as per manufacturer’s shade card. The arms of the chairs should be Soft cushioning on plastic Handle over chrome plated obround tube.. The base should be Fixed Type, Chrome Plated Size H 990 X W600 X D 720 (=/- 10 MM)

The Seat Cushion of the chairs should be pressed on 13.5 mm single 'L' Ply (Hot pressed). The base seat cushion of the chair should be made up PU Foam , D -32 kg/m3 , H-20 and back rest PU Foam , D -28 kg/m3 , H-20 .The polyurethane foam base and back should be covered with Leatherette as per manufacturer’s shade card. The arms of the chairs should be Soft cushioning on plastic Handle over chrome plated obround tube . The Gas lift mechanism should be of Lift - 85 mm (TDC 152mm &BDC 67 mm) The pedestal should be Revolving Pedestal - Chrome Plated Steel base 5 prong with 3 piece bellow. with Black Nylon - Twin Wheel Pin castor .The mechanism should be of Torsion Bar - Single point control. Provides maximum adjustability and scope for comfort. Seat & Back moves in same direction. 1 position locking with anti shock feature.Size H 1280 X W650 X D 650 (=/- 10 MM)

Description of Work / Item(s)

Amount

CIRCUIT CUM POINT WIRING

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group-C (Primary point )

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group-C (looping point )

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, “C” curve including connections, painting etc. as required.

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire For 6A Light Circuit Point

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire For 6A UPS & Light Circuit Point

2 X 4 sq. mm + 1 X 4 sq. mm earth wire For 16A Power Circuit Point

4 X 10 sq. mm + 2 X 6 sq. mm earth wire For DB Submain wire

4 X 16 sq. mm + 2 X 6 sq. mm earth wire For DB Submain wire

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

4 X 10 sq. mm (25 mm)

4 X 16 sq. mm (28mm)

3½ X 35 sq. mm (32mm)

3½ X 50 sq. mm (35mm)

NON SCHEDULE ITEMS

Supplying and fixing modular Indicator Lamp on the existing modular plate & switch box excluding modular plate as required.

Supplying & laying of following 1100 volt grade XLPE insulated PVC sheathed aluminium conductor armoured cables as per specification in existing trenches, cable trays, ducts over bed of sand, clamped includes anchor fastners wall with suitable clamps, saddles fixing bolts including connecting testing and commissioning.

3.5 core 35 sq. mm For DB Submain wire

3.5 core 50 sq. mm For DB Submain wire

DISTRIBUTION BOARDS

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

4 way (4 + 12), Double door

8 way (4 + 24), Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole (6/32 Amps)

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

CABLE TRAYS AND ACESSERIES

Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required.

100 mm width X 50 mm depth X 1.6 mm thickness

150 mm width X 50 mm depth X 1.6 mm thickness

300 mm width X 50 mm depth X 1.6 mm thickness

Supplying and installing following size of perforated painted with powder coating M.S. cable trays bends with perforation not more than 17.5%,, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required.

100 mm width X 50 mm depth X 1.6 mm thickness

150 mm width X 50 mm depth X 1.6 mm thickness

300 mm width X 50 mm depth X 1.6 mm thickness

Supplying and installing following size of perforated painted with powder coating M.S. cable trays Tee with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required.

150 mm width X 50 mm depth X 1.6 mm thickness

300 mm width X 50 mm depth X 1.6 mm thickness

Supplying and installing following size of perforated painted with powder coating M.S. cable trays Reducer with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required.

100 mm width X 50 mm depth X 1.6 mm thickness

150 mm width X 50 mm depth X 1.6 mm thickness

300 mm width X 50 mm depth X 1.6 mm thickness

CONDUITING WIRING AND CABLING FOR TELEPHONE / TV NETWORK SYSTEM

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supply, fixing, connecting and testing of Telephone/computer modular sockets modular plate anodised MS box and blanking late in surface/recessed including connectionetc as required. RJ-11 telephone socket two line with shutter

Supplying drawing, connecting and testing of 0.61mm dia annealed copper conductor PVC insulated PVC sheathed telephone Wire/cables in Existing PVC conduit or a racks as required.

2 pair Telephone cable.

4 pair Telephone cable

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in theexisting surface/ recessed Steel/ PVC conduit as required.1 run of cable

Supplying and fixing metal box of following sizes (nominal size) on surface or in reces with suitable size of phenolic laminated sheet cover in front including painting etc as required.75 mm x 75 mm x 60 mm deep

NON SCHEDULE ITEMS

Providing, fixing connecting and testing of solder less telephone Tag block of following capacity ties as required in suitable size of m.s. hinged lockable cover box duly painted etc. as required of Krone type.

20 pair Tele Tag Blk

50 pair Tele Tag Blk

Supply, fixing, connecting and testing of RJ-45 face plate( computer line) with shutter DN-460 computer sockets modular plate anodised MS box and blanking late in surface/recessed including connectionetc as required.

SUPPLY OF LIGHTING FIXTURES.

Supply 'Installation, testing & commissioning of Surface mounting 15W LED down lighter, LED of 1 to 3 W each assembled on single MCPCB, having color temp 5700K & having 50000 burning hrs life with minimum @ L 70, system lumen output should be minimum with efficacy>80lm/W. LED driver PF 0.95 & THD < 15%. The colour rendering index of LED light should be more than 70. Housing made of CRCA powder coated frame with glare free diffused polycarbonate cover. Submission LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer manadatory. i/c connection wire, testing etc. to complete the job. Make: Legero, Model No. LSP 1015, 2 Yrs. Driver & 2 Yrs Fixtures Guarantee certificate from manufacturer.

Supply 'Installation, testing & commissioning of recessed mounting type 36W 600 X 600 mm Led light fixture, LED of 1 to 3 W each assembled on single MCPCB, having color temp 5700K & having 50000 burning hrs life with minimum @ L 70, system lumen output should be minimum with efficacy>80lm/W. LED driver, PF 0.95 & THD < 15%. The colour rendering index of LED light should be more than 70. Housing made of CRCA with glare free diffused polycarbonate cover. Submission LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer manadatory i/c connection wire, testing etc. to complete the job. Make: Trilux, Model No. Enterio IND M73 OA LED 3600 860 ET, 5 Yrs. Driver & 5 Yrs Fixtures Guarantee certificate from manufacturer.

Supply 'Installation, testing & commissioning of 9W Led tube light (600 mm) /mirror Light LED tube with non integral / integral driver, 4000K color temp having 40000 burning hrs life with minimum @ L 70, system lumen output should be minimum with efficacy > 80 lm/W. LED driver PF 0.95 & THD < 15%. The colour rendering index of LED light should be more than 70. Submission LM 80-08 Form LED Source Manufacturer & LM79-08 /IS16106 from NABL approved lab. Manufacturer mandatory i/c connection wire, testing etc. to complete the job. Make: Legero, Model No. LTB 9, 2 Yrs. Driver & 2 Yrs Fixtures Guarantee certificate from manufacturer.

Supply 'Installation, testing & commissioning of Surface mounting 12W LED down lighter, LED of 1 to 3 W each assembled on single MCPCB, having color temp 5700K & having 50000 burning hrs life with minimum @ L 70, system lumen output should be minimum with efficacy>80lm/W. LED driver PF 0.95 & THD < 15%. The colour rendering index of LED light should be more than 70. Housing made of CRCA powder coated frame with glare free diffused polycarbonate cover. Submission LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer manadatory. i/c connection wire, testing etc. to complete the job. Make: Legero, Model No. LSP 1012, 2 Yrs. Driver & 2 Yrs Fixtures Guarantee certificate from manufacturer.

Supply and fixing 18W (1200 mm) Surface & Wall mounted Led tube light with non integral / integral driver, 4000K color temp having 40000 burning hrs life with minimum @ L 70, system lumen output should be minimum with efficacy > 80 lm/W. LED driver PF 0.95 & THD < 20%. The colour rendering index of LED light should be more than 70. Submission LM 80-08 Form LED Source Manufacturer & LM79-08 /IS16106 from NABL approved lab. Manufacturer mandatory i/c connection wire, testing etc. to complete the job. Make: Legero, Model No. LTB 18, 2 Yrs. Driver & 2 Yrs Fixtures Guarantee certificate from manufacturer.

Supplying, erection and testing of Wall Mounting fan complete with Wall Bracket ,canopy, blades, speed Regulator including louvers/ shutters etc. A.C 230-250 volts with connections and including raw bolt/Anchor hole fastener etc. complete finished of approved as required.400 mm Dia Wall Fan (Make: havells, D’zire)

Supplying, erecting and testing of Exhaust Fan with mounting frame, blades AC 230-250 complete connection and including, frame bolt/ Anchor hole fastners etc. complete finished of approved as required.300mm Dia Exhaust Fan (Make: Havells , Ventil Air - DS)

UPS WITH ACCESSORIES.

Supply, Installation, Testing and Commissioning of following KVA capacity high performance IGBT/ PWM based fully microprocessor controlled online UPS system suitable for input and output parameters as per specifications. The UPS shall have inbuilt zig zag K rated isolation transformer at inverter output. The UPS shall be provided in powder coated fan cooled enclosure painted in colour as per specifications. The UPS shall be suitable for normal, emergency, recharge, by-pass and maintenance mode. The system be expandable in such a manner that addition of another module of similar capacity can double the system output with common by-pass. The UPS shall have a microprocessor based display and control panel. UPS shall have own batteries with 30 minute battery back-up. Complete system must be provided as per specifications approved drawing and as per site requirement including inter connecting cables from battery to UPS, UPS to panel etc.& supports for complete system as approved by the Engineer in charge.

20 KVA UPS described as above (three phase Input & three phase Output)

Description of Work / Item(s)

Amount

MACHINERY Indoor Units (Nominal Capacity)

Supply and installation Hi Wall Split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2 of capacity as shown.

1.0 TR Split AC (Make: - Daikin / Blue Star / LG / Mitsubishi / Hitachi / General - 1.0 Ton 5 Star Split Air Conditioner)

1.5 TR Split AC ((Make: - Daikin / Blue Star / LG / Mitsubishi / Hitachi / General - 1.5 Ton 5 Star Split Air Conditioner)

2.0 TR Split AC (Make: - Daikin / Blue Star / LG / Mitsubishi / Hitachi / General - 2.0 Ton 5 Star Split Air Conditioner)

2.5 TR Split AC(Make: - Daikin / Blue Star / LG / Mitsubishi / Hitachi / General - 2.5 Ton 5 Star Split Air Conditioner)

PIPING Refrigerant Piping - Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with following thick cross link closed cell preformed sections of polyethylene insulation applied by adhesive confirming to standard specifications and finally applying 0.63mm aluminium sheet cladding complete with type3, grade 1 roofing feltstrip(as per IS:1322 as amended up to date) at joints and repairing of damage to building etc. as per specifications and as required complete in all respect.Note : The Pipes of sizes 150mm & below shall be M.S. ‘C’ class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above.

25 mm dia(19 mm thick insulation)

Drain Piping- Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

32 mm dia

ELECTRICAL WORK - Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.`

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

4 X 10 sq. mm + 2 X 10 sq. mm earth wire

4 X 16 sq. mm + 2 X 16 sq. mm earth wire

Supply Instulation & Testing Stabilizer with all fittings laid in fixed to walls.

400 Voltage Stabilizer for AC upto 1.0 ton (Make: V-Guard VNS-400 Voltage Stabilizer)

400 Voltage Stabilizer for AC upto 1.5 ton (Make: V-Guard VND-400 Voltage Stabilizer)

500 Voltage Stabilizer for AC upto 2.0 ton (Make: V-Guard VND-500 Voltage Stabilizer)

400 Voltage Stabilizer for AC upto 1.5 ton (Make: V-Guard VND-400 Voltage Stabilizer)

Description of Work / Item(s)

Amount

PA SYSTEM

Supply , installation , testing and commissioning of 16 Watts Ceiling Speaker complete with standard accessories as per tender specification.

Supply , installation , testing and commissioning of 2 core 1.5 sqmm loudspeaker cable as per the tender specifications.

Supply , installation , testing and commissioning of UL Listed Connectors as per the tender specifications.

Supply , installation , testing and commissioning of 12 U Equipment rack as per the tender specifications.

AUDIO /VIDEO SYSTEM

Supply, Installation, testing and commissioning of projector mount bracket for the LCD complete with standard accessories as per tender specifications.

Supply, Installation, testing and commissioning of projector mount bracket for the LCD complete with standard accessories as per tender specifications.

Supply , installation , testing and commissioning of Pop up box with VGA + Audio , HDMI and Universal Power Outlet as per the tender specifications.

Supply , installation , testing and commissioning of Cover Plate , White , Textured as per the tender specifications.

Supply , installation , testing and commissioning of HDMI Twisted Pair Extender Set as per the tender specifications.

Supply , installation , testing and commissioning of Microphone control unit/processor as per the tender specifications.

Supply , installation , testing and commissioning of Delegate Unit for conferencing system as per the tender specifications.

Supply , installation , testing and commissioning of chairman Unit for conferencing system as per the tender specifications.

Supply , installation , testing and commissioning of System cable CAT5 with RJ45 Connector 2m as per the tender specifications.

Supply , installation , testing and commissioning of System cable CAT5 with RJ45 Connector 10m as per the tender specifications.

Supply , installation , testing and commissioning of 16 Inch Gooseneck Microphone as per the tender specifications.

Supply , installation , testing and commissioning of Audio Power Amplifier with 70/100V and 1 x 90 w power Output as per the tender specifications.

Supply , installation , testing and commissioning of 16 watt ceiling speaker as per the tender specifications.

Supply , installation , testing and commissioning of iPad with control application as per the tender specifications.

Supply , installation , testing and commissioning of Wireless Router as per tender specification.

Supply , installation , testing and comissioning of 8 Port PoE Switch as per tender specification.

Supply and laying of shielded twisted pair cable that can travel upto Min 50 Mtrs distance .

Supply , installation , testing and commissioning of 2 core 1.5 sqmm loudspeaker cable as per the tender specifications.

Supply , installation , testing and commissioning of 2 core shielded microphone cable as per the tender specifications.

Description of Work / Item(s)

Amount

FIRE EXTINGUISHERS - Providing and fixing of carbon-di-oxide type fire extinguishers consisting of welded M.S. cylindrical body, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket conforming to ID:15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge.

Capacity 4.5 Kg.

Providing and fixing of ABC Powder type fire extinguishers consisting of welded M.S. cylinderical body, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket conforming to ID:15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge. Capacity 4.0 Kg.

FIRE ALARM SYSTEM

Supply, installation, Testing and Commissioning of addressable Optical Detector wih inbuilt isolator, Automatic addressing, Shall be UL/EN54 Certified.

Supply, installation, Testing and Commissioning of addressable Optical Thermal Detector wih inbuilt isolator, Automatic addressing, Shall be UL/EN54 Certified.

Supply, installation, Testing and Commissioning of addressable output module with inbuilt isolators Shall be UL/EN54 Certified.

Supply, installation, Testing and Commissioning of Indoor addressable Manual break glass unit (Double action) with inbuilt isolators, with flexible network structures & necessary fixing arrangements with key complete as required, Shall be UL/EN54 Certified.

Supply, installation, Testing and Commissioning of Strobe for base sounder red with inbuilt isolaters Shall be UL/EN54 Certified.

Supply, installation, Testing and Commissioning of Respone Indicator Shall be UL/EN54 Certified.

Supply, installation, Testing and Commissioning of 4 Loop Microprocessor based interlligent and electronically addressable, modular with networking card & printer port-loops panel (expandable) with each loop capacity of 159 detectors. Fire alarm control panel with 5.7 inch touch screen LCD display, multiple access levels, 10,000 event history logs in the non volatile momory (EEPROM). THe panel should be modular microprocessor based in nature and should be expandable from single loop to up to 32 loops. The panel shall have 240V AC power supply, Automatic battery charger, 24V ceiled lead acid maintenance free batteries sufficient for 24 hours normal working and then be capable of operating the system for 30 minuts during emergency condition. Provision for integration to BMS back net software. The panel Shall be UL/EN54 Certified.

Supply, installation testing and commissioning of firefighter’s telephone handsets for use with the firefighter's (stainless steel) telephone jack stations. The telephone handsets shall be red in color and have a 5 ft (1.5m) coiled cord. as per specification.

Supply, installation testing and commissioning of 2W Double sided LED signage with built in battery back-up for minimum of 3hrs continuous operation in an active mode. luminaire shall be fitted with a bi-colour Red/Green LED to indicate its status. complete with all accessories as per required.

Supplying and Wiring following sizes of PVC insulated FR twin twisted copper conductor stranded cables shall be 650 volts grade cable in the existing surface/recessed steel conduit as required.Armoured Cable copper conductor size 1.5 x 2 core sqmm

Supplying and fixing rigid steel conduit ISI marked along with the accessories in concealed system including cutting the wall and plastering & repainting the wall with matching colour to bring in its original condition as required 25 MM DIA

JV INFRATECH

Mahendru Consultants

Aran Projects Private limited

SANJIV SAHAI SHARMA

EVERCREST PROJECTS PVT LTD

Pooran Chand Sharma and Sons

Mahendru Consultants

M/S R SONS INFRA

Aran Projects Private limited

JV INFRATECH

Pooran Chand Sharma and Sons

SANJIV SAHAI SHARMA

Aran Projects Private limited

EVERCREST PROJECTS PVT LTD

Mahendru Consultants

JV INFRATECH

M/S R SONS INFRA

SANJIV SAHAI SHARMA

Mahendru Consultants

Pooran Chand Sharma and Sons

M/S R SONS INFRA

EVERCREST PROJECTS PVT LTD

SANJIV SAHAI SHARMA

JV INFRATECH

Mahendru Consultants

Aran Projects Private limited

EVERCREST PROJECTS PVT LTD

JV INFRATECH

M/S R SONS INFRA

Pooran Chand Sharma and Sons

JV INFRATECH

Aran Projects Private limited

EVERCREST PROJECTS PVT LTD

M/S R SONS INFRA

Mahendru Consultants

SANJIV SAHAI SHARMA

SANJIV SAHAI SHARMA

Aran Projects Private limited

Mahendru Consultants

M/S R SONS INFRA

EVERCREST PROJECTS PVT LTD

Pooran Chand Sharma and Sons