Fabrication supply and installation of Exhibit Cabinet strutures at CSIR National Chemical Laboratory Pune

Fabrication, Supply and Installation of Exhibit Cabinets /Structures including Interior Development, Painting, Illumination System with Electrical fittings for the Thematic Gallery of Archive & Science Museum at CSIR-National Chemical Laboratory, Pune as per the enclosed Drawings with Specifications mentioned in the Tender Document

Providing and fixing of wooden panels having teakwood (CP) frame of Cross Section 2” X 1”, in a grid of 2’ X 2’ and covered with 12 mm BWP Ply (IS 710) on one side.

Providing and fixing of 8mm thick toughened glass of approved make for low height / full height partition / Cabinet Enclosure with polished teakwood or PVC beading / fixture / adhesive etc.

Providing and fixing 12mm thick Rigid PVC Foam Board (Wallmounted / Self-supported Standalone / Interlinked with Seamless Joints / Curved etc. being framed with the same foam board Cross-Section of 2" x 1", in a grid of 2' x 2') for content display, as per artwork which will be provided by NSCM with necessary beading etc. at site. Technical Parameters of Rigid PVC Foam Board: Surface Finish: Matt finish with hard surface coating Mechanical Properties: Tensile Strength ≥15 Mpa (DIN 53455), Modulus of Elasticity 900-1500 Mpa (DIN 53457), Physical Properties: Density >= 0.6 g/cc (DIN 53479), Hardness ≥55 Shore D (ASTM D 2240) Water Absorption ≥1.0 % (DIN 53495), Flammability Self Extinguishing

Providing and fixing 12mm thick Rigid PVC Board (High Density) for content display and Kiosk Cabinet, finished with approved paint or polished, as per artwork which will be provided by NSCM with necessary beading etc. at site. Technical Parameters of Rigid PVC Board: Surface Finish: Matte finish with hard surface coating

Providing and fixing 6mm thick Acrylic Solid Surface (approved color shade and adheshive) with appropriate design or CNC cut design, as per artwork which will be provided by NSCM at site. Technical Parameters: Tensile Strength 5400 – 6000 psi, Tensile Modulus 1.4 x 106psi to 1.6 x 106psi Flexural Strength 8040 – 10200 psi, Flexural Modulus 1.2 x 106psi to 1.4 x 106psi Compressive Strength 14000 to 16000psi, Elongation 0.4 – 0.9 % Specific Gravity 1.6 - 1.8 g/cm3, Hardness 85 to 95 (Rockwell) Thermal Expansion 3 x 10-5 to 3.9 x 10-5 m/m 0C, Colours should be homogenous throughout the entire thickness of material. Toxicity - Non-toxic, Fungal Resistance - Resistant (No fungal growth on surface) Boiling Water Resistance - Resistant

Providing and fixing of 1mm thick laminate sheet of Green / Century / approved make (IS 2046) of desired shade on wooden surface.

Finishing of surface (plywood/metal) with two or more coats of Asian/ICI make NC spray paint of desired shade after surface preparation (applying surface and NC putty etc.)

Wall painting with premium acrylic emulsion / easy clean emulsion / paint of specific shade and manufacturer and grade (Berger / Asian Paints color / equivalent) to give an even shade. Two or more shades on new surface.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall/ ceiling surface having VOC content less than 50 grams/litre.

Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces. Two coats

Finishing walls with textured exterior grade paint of required shade. New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm Asian Paints Royale Play Antico from Asian Paints (Texture wall) Linea Top coat Taupe tan M025 or as approved.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Fabrication and installation of Stainless Steel (Brushed Finish) railing including Sections or frame for projector / digital display unit mounting (considering the height & ceiling appropriate telescopic design may be incorporated)

Electrical Requirements: Supply & fixing of power point wiring with 1.1 KV Grade unsheathed FR PVC insulated multi strand copper conductor wires of following sizes in 25mm Dia bore rigid PVC conduit including S&F of PVC conduit, bends, junction boxes & required accessories, mostly laid in RCC slab and partly concealing of conduit in brick wall including cutting of brick wall and making good the damages, making connections, testing etc. as required. a) Power point wiring from MCB SDB to 16/6A Socket outlet with 2 Nos. 1Cx4sq.mm. + 1 No. 1Cx2.5sqmm, rate being inclusive of concealed PVC conduit with bends, junction boxes, etc. as required. (two plug sockets to be connected in one circuit.)

b) Power point wiring from 16/6A socket outlet to the adjacent 16/6A socket outlet with 2 nos 1Cx2.5 sqmm + 1 no 1C x 1.5 sqmm. Rate inclusive of concealed PVC conduit, bends, junction boxes etc. as required

c) Supply and fixing of 1 no. of 6/16A combined modular type socket outlet with modular type switch incl. recessed mounted GI box, modular base, cover plate & all required materials including internal connections and testing.

d) Supply and fixing of Track Light (20 W, Warm White 3500K, Black Color) & all required materials including internal connections.

e) Supply and fixing of Framing Projector Track Light (20 W, Warm White 3500K, Black Color) & all required materials including internal connections.

f) Supply and fixing of Track (Length 1mtr., Black Color) suitable the approved track light as specified in 14. (d) & all required materials including internal connections.

g) Supply and fixing of Track (Length 2mtr., Black Color) suitable the approved track light as specified in 14. (d) & all required materials including internal connections.

wembley interior pvt. ltd.