Providing RSI to road leading to Kaleshwaram temple in view of Godavari Pushkaralu-2027 at Kaleshwaram (2nd call)

Providing and laying of Hot Applied Thermoplastic compound 2.5 mm thick including reflecting glass beads on bituminous surface at 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass bead as per IRC:35, the finished surface to be level, uniform and free from streaks and holes etc. complete for finished item of work (with all leads and Lifts).(Data communicate vide E-in-C(R&B) SR&CRN, Circular Memo No. RSI/DCE(R)/Con.Er(RS/DEE(RS)/AEE(RS)/2022, Dt:23.11.2022

Providing Rumble strips for 10.00 mm thickness with thermoplastic paints including cost and conveyance of all materials, equipment, machinery and labour with all leads and lifts, loading and unloading charges necessary for successful completion of the work as directed by the Engineer - in – charge and conforming to IS : 164-1981 (1st revision reaffirmed in 1986) and clause 803 of MOST specifications for Road & Bridge works and also conforming to IRC 35-1997.15. ( 4 layers of 2.5mm thick)

Supplying & Fixing of Molded Shanks Raised Pavement Markers made of plastic body moulded from HIPS(HI- impact polysterene ) or ABS or ASA (Acrylic strene Acrylonitrite) and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No.RW/NH/33023/10-97-DOIII Dt.11-06-1997.The height, width and length shall not exceed 50mm,100mm and 100mm and with minimum refelective area of 13 Sqcm on each side and the slope to the base shall be 35 +/- 5 degree.The Strength of detachment of the integrated cylindrical shanks (of diameter not less than 19 +/- 2 mm and height not less than 30 +/- 2 mm ) from the body is to be a minimum value of 700 Kgs.Fixing will be by drilling holes on the road for the twin shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturers recommendation and complete as per the instructions by the Engineer-in-Charge.

Providing and fixing Cautionary / Warning sign boards size 600 mm equilateral triangle made out of Type – XI of ASTMD 4956-09 wide angle cube cornered micro Prismatic Retro reflective sheeting and confirming to IRC 67:2012 for full background of White colour and letters/logos done by screen printing in Black colour, boarders by screen printing in Red colour and fixed over 4MM Aluminium Composite Material sheet having minimum 0.5 mm thick Aluminium skin on both sides with back side painted grey colour and fixed over back support frame of M.S angle 25x25x3mm all round and fixing with 35x35x4mm and mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1 m from the ground level to the bottom of the board. The signpost should be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint Black and White colour with bands of 30cm of height. The signpost shall be firmly fixed with MS base angle 35x35x4 mm in to the ground by M-15 Concrete foundation of size 450x450x600mm including cost and conveyance of all materials ,equipment, machinery and labour with all leads and lift, loading chages necessary for satisfactory completion of the work as directed by Engineer -in-Charge.

Providing & fixing junction boards of size 1500 x 1200 mm made out of Type – XIof ASTMD 4956-09 wide angle cube cornered micro Prismatic Retro Retro reflective sheeting Prismatic Retro reflective sheeting and confirming to IRC 67:2012 for full background of Green Colour & White Letters and fixed over 4MM Alluminium Composite Material sheet having minimum 0.5 mm thick Aluminium skin on both sides with back side painted grey colour and fixed over back support frame of M.S angle 25x25x3mm all round and fixing wit h 35x35x4mm and mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1 m from the ground level to the bottom of the board. The signpost should be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint Black and White colour with bands of 30cm of height. The signpost shall be firmly fixed with MS base angle 35x35x4 mm in to the ground by M-15 Concrete foundation of size 450x450x600mm including cost and conveyance of all materials ,equipment, machinery and labour with all leads and lift, loading charges necessary for satisfactory completion of the work as directed by Engineer -in-Charge.

Providing & fixing Hazard Marker of 300X900mm Reflectorized panel (Type XI) of Supplying and installation of Hazard Markers/Delinators using M.S. angle of size 55x55x6mm and 120cm high above ground level painted with two coats of black & white stripes of 15cm wide with first quality synthetic enamel paint over one coat of appropriate primer of approved brand,colour, with 30cm x 90cm Type – XI of ASTMD 4956-09 wide angle cube cornered micro Prismatic Retro reflective sheeting of Yellow colour and confirming to IRC 67:2012 fixed over 3MM Alluminium Composite Material having minimum 0.30 mm thick Aluminium skin on both sides with standard supports consisting of alternately black and Yellow with black stripes in screen printing sloping downward at an angle of 45 degrees towards the side of the obstruction on which the traffic is to pass and buried into the ground in a trench of size 30cm x 30cm and 50cm depth filled with CC M-20 including cost and conveyance of all materials, equipment, machinery and labour with all leads and lifts, loading and un-loading charges necessary for successfullcompletion of the work on any road in division as directed by Engineer-in-Charge and conforming to IRC 67-2012 &MORT&H specification No.805 and approved drawings etc., complete for finished item of work.

Providing and erecting a W metal beam crash barriercomprising of 3mm thick corrugated sheet metal beam rail,70cm above road/ground level,fixed on ISMC series channel vertical post ,150x75x5mm spaced 2m center to centre,1.8m high ,1.1m below ground /road level , all steel parts and fitments to be galvanised by hot dip process, all fittings to conform IS:367 and IS: 1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150x75x5mm,330mm long complete as per clause 810. Rate as approved E-in-C (R&B) SR&CRN,Circular memo No.RSI/DCE(R)/Con.Er.(RS)/DEE(RS)AEE/(RS)/2022 Dt:23.11.2022

Painting 2 coats after filling the surface with acrylic emulsion paint exterior grade with silicon additives having VOC (Volatile organic compound) content less than 30 grams/Lit in all shades on new plastered concrete surface as per Tech Specification 800 MORTH (5th revision) and as directed by the Engineer in charge etc., complete for finished item of work.