REPAIR RESURFACING TO CERTAIN ROADS AND ROAD FURNITURE AT DIAT DU AND MILIT GIRINAGAR PUNE 411025

Amount

Repair to pot holes any depth not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc cutting around edges to at least 25 mm in depth making good by applying tack coat @ 5Kg/10 Sqm putting in premixed bituminous macadam, well rammed and sealed with binder with 6.80 kg per 10 sqm, blinded with 0.06 cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings). depth of potholes exc 30 mm complete all as specified and directed.

Preparation of existing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning with gunny bags to remove all loose dirt etc. and applying evenly a tack coat of paving bitumen VG-10 conforming to IS:W-73:2006 @ 5 Kg/10 Sqm of road surface with mechanical sprayer, operated by hot pressure mechanism complete all as specified & directed.

M&L for providing and laying 75mm or less thickness (Consolidated thickness) premix bituminous macadam (design mix) with crushed and graded coarse stone aggregate filler (cement) and sand (fine aggregate) mixed with 4% binder content using paving bitumen by VG-30 grade by weight of total mix, mixing bituminous macadam in Hot mix plant and laid with mechanical paver complete & rolled to required camber and gradient by using 8 to 10 tonne power roller complete, all as specified and directed. NOTE :- The design mix for BM shall be carried out by contractor from approved NABL Lab / Institute / Govt Engg College as directed and design charges thereof shall deemed to be included in the unit rate coated by the contractor.

M&L for providing and laying bituminous premix semi dense asphaltic concrete 30mm consolidated thickness with 5.5% binder content VG-30 conforming to IS: W-73:2006 paving bitumen content by weight of total mix, rolled and compacted to required camber and gradient by using 8 to 10 ton power roller complete all as specified and directed. NOTE:- (i) Mixing of SDAC shall be carried out in hot mix plant. Laying of bituminous premix semi dense asphaltic concrete shall be done only by using authomatic type censor paver. (ii) The design mix for bituminous premix semi dense asphaltic concrete shall be carried out by contractor from approved NABL Lab / Institute / Govt Engg College as directed and design charges thereof shall deemed to be included in the unit rate coated by the contractor.

M&L for road marking 2.00mm thick centre line, Side line, stop line, dashes, arrows, barckets and similar work on road surfaces as per IRC pattern with thermo plastic paint of approved quality and make with 8% glass beads laid at temprature 1600 C with a special applicator machine complete all as per manufacturer's instructions and traffic diversion arrangement complete all as specified & directed. Make :- CMS Bombay / Shivalik Prime-Chandigarh / Ritactor-Meerut / SN Industries-Delhi / Reliance Thermoplast-Delhi / CMS Traffic System Ltd, Mumbai

Demolition of cement concrete in floors and pavings n. exc. 15cm thickness (below or above ground level) complete all as specified & directed.

M&L for Hardcore of gauge not exc. 63mm deposited, spread and levelled in layers not exc. 15cm thick watered and rammed to a true surface complete all as specified & directed.

M&L for 75 mm thick cement concrete 1:4:8 type B1 using 40 mm graded stone aggregate as in sub base complete all as specified & directed.

Demolition of Stone slabs/paver blocks and tiles of any description or thickness in floors, aprons etc complete all as specified & directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified & directed.

M&L for PCC kerb stone precast (factory made) any shape and size or as directed by Engr-in-Charge including weathering, slightly rounded or chamfered andgles and throating, in type B-1 (1:2:4) 20mm graded stone aggregate set in cement mortar 1:4, complete all as specified and directed.

M&L for preparation of new plastered surfaces of kerb stone of any description over 10cm girth or width not otherwise described and applying two coats of synthetic enamel paint over and including priming coat to PCC surfaces complete all as specified & directed. .

M&L for preparation of old plastered surfaces of kerb stone of any description over 10cm girth or width not otherwise described and applying two coats of synthetic enamel paint complete all as specified & directed.

M&L Cement concrete in levelling course ,foundations, filling and mass concrete type B2 1:2:4 using 40 mm graded stone aggregate complete all as specified & directed.

Supply and fixing metal tubulr dealineator made out of ABS round body fitted with 2 Nos 65mm dia highly reflective reflectors made out of PMMA and mounted on 45 / 50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed. Make : DARK EYE or equivalent of make GREEN LITE/3M/TATA BP. (ii) Reflectors shall be positioned at the best eye guiding level so that drivers shall be warned from a safe distance.

MOHANLAL MATHRANI CONS. PVT. LTD.

PAVEWAY CONSTRUCTIONS PRIVATE LIMITED