REPAIR AND MAINT OF ALL TYPES FURNITURE (MAP, WOODEN AND STEEL) AT MIL STN PATIALA UNDER GE (S) PATIALA

Amount

SCHEDULE 'A' PART-I (MAP FURNITURE)

Bed Hard (FD/E6/MAP/08(R) )

Taking out of unsv ply wood including Nut and Bolt with Washer complete and S&F new ply wood 12 mm thick BWR complete as per existing shape ,size and as per Drg and complete all as specified and directed.

Taking out unsv Head Board and S&F New Head Board of Prelaminated Particle Board/MDF Board Exterior Grade 18mm both side Teak Face and other side white complete as per Drg complete all as specified and directed.

Taking out unsv foot Board and S&F new foot Board of Prelaminated Particle Board/MDF Board Exterior Grade 18mm both side Teak Face and other side white complete as per Drg complete all as specified and directed.

M&L for painting of Bed Hard Steel complete outside and broken pipe duly welded complete all as specified and directed.

S & F of new rubber shoes as per drg complete all as specified and directed.

Table Bed Side (FD/E6/MAP/15(R))

Taking out unsv Top and S&F New Top of Prelaminated Particle Board Exterior Grade 18mm one side Teak Face and other side white with 04 mm Teakwood beading all around it complete as per Drg complete all as specified and directed.

Taking out of unsv back and S&F new back ply of 9mm thick commercial BWR complete as per Drg complete all as specified and directed.

Taking out of unsv sides and S&F new sides of Prelaminated Particle Board/MDF Board Exterior Grade 18mm one side Teak Face and other side white complete as per Drg complete all as specified and directed.

Taking out of unsv upper Drawer and S&F new upper Drawer as per existing shape and size. complete all as specified and directed.

Taking out of unsv lower Drawer and S&F new lower Drawer as per existing shape and size complete all as specified and directed.

Taking out old unsv knobs and S&F new knobs as per sample complete all as specified and directed.

Painting of table bedside steel as per Drg complete all as specified and directed.

S&F of new telescope chennel as per drg complete all as specified and directed.

Chair Dining Officers (FD/MAP-II/04)

M & L for carrying out repair/replacement of following parts of Chair Dining as per drawing after dismantling the old parts complete all as specified

S & F Front legs of Teak wood.

S & F Rear Legs of Teak wood.

S & F Front Rails of Teak wood.

S & F Side Rails of Teak wood.

S & F Back Rails of Teak wood.

S & F back Stiffners of Teak wood.

S & F stiffeners of Teak wood.

S & F Seat 09 mm thick Ply wood BWR grade.

Supply only seat 75mm thick 40 density with fabric appvoved by GE

M & L for applying two coats of french polish to Chair Dinning after preparation of surface complete all as specified.

Chair writing (FD/E6/MAP/12)

M&L for Taking out old unsv Seat and S&F New Seat complete as per Drg

M&L for Taking out old unsv Back and S&F New Back complete as per Drg

M&L for Taking out old unsv arm rest and S&F new arm rests with Nut and bolt as per Drg

M&L for Jointing the Broken Parts of steel Furniture and painting all as Directed.

Bin linen multipurpose (FD/E6/MAP/09)

Taking out old unsv back ply and S&F new Back ply as per drg.

Taking out old unsv door shutter and S&F new door shutter as per drg

Taking out old unsv drawers and S&F new drawers as per drg

Taking out old unsv knobs and S&F new knobs as per drg

Taking out old unsv top and S&F new top with 18mm thick pre Laminated particle board exterior grade including egding with wooden beading all as per drg

Applying two Coat of Synthetic Enamel Paint as per Drg

Teapoy varandah MAP (FD/E6 (MAP)/17 )

Taking out old unsv top and S&F new top of prelaminated Pratical Board one side white 18/19mm thick along with 4mm thick teak wood beading all arround the Top

Applying two Coat of Synthetic Enamel Paint as per Drg.

M&L for jointing of broken part steel fur through welding

Chair computer (FD/E6/MAP/01)

Taking out old u/s seat S&F new seat as per Drg

Taking out old u/s back for S&F new back as per Drg

Taking out Base complete with wheel as per drg.

Taking out new wheel as per sample as drg

Taking out of hydrolic System as per drg.

TABLE DINING 120 X 90 CM (FD/MAP-II/03)

M & L for carrying out repair/replacement of following parts of Table 120 x 90 cm as per drawing after dismantling the old parts complete all as specified :-

Supplying and fixing top of the table with 18/19mm thick prelaminated particle board ISI Marked standard exterior grade as in top of the table including 6mm thick Teak beading all around .

Supplying and fixing of legs of Teak wood.

Supplying and fixing of long side rails of Teak wood.

Supplying and fixing of short side rails of Teak wood.

Supplying and fixing of stiffeners Teak wood.

Applying two coat of french polish after preparation of surfaces.

Chair Dining (FD/MAP-II/5)

M & L for carrying out repair/replacement of following parts to chair dining, as per drawing after removing the old unservicable parts complete all as specified and shown on drawing :-

Legs using teak wood (MP Teak)

Rails using Teak Teak wood (MP Teak)

Stiffners using Teak Wood (MP Teak)

Supply and fixing of PVC seat shall be provided.

Applying two coat of french polish (Ready Made) to article after necessary preparation of surfaces.

SCHEDULE 'A' PART-II (WOODEN FURNITURE)

TEAPOY WOODEN (FD-382 Fd-278)

M & L for carrying out repair/replacement of following parts of Teapoy as per drawing after dismantling the old parts complete all as specified :-

Supplying and fixing legs of Teak wood .

Supplying and fixing long rails of Teak wood.

Supplying and fixing short rails of Teak wood.

Supplying and fixing top of 18/19mm thick prelaminated particle board ISI Marked standard exterior grade and 6mm thick Teak edging all around.

Supply and fixing stiffners of Teak wood.

Applying two coat of french polish to Teapoy after necessary preparation of surfaces . The colour of polish/Vanish shall be Melamine/Deep Brown / Wall Nut or as approved by the GE. The colour of prelaminated particle board shall be approved by GE.

PEG TABLE (FD-384 FD277)

M & L for carrying out repair/replacement of following parts of Peg Table as per drawing after dismantling the old parts complete all as specified :-

Supplying and fixing the legs of Teak wood.

Supplying and fixing long rails of Teak wood.

Supplying and fixing short rails of Teak wood.

Supplying and fixing top of 18/19 mm thick prelaminated particle board ISI Marked standard, exterior grade and 6mm thick Teak edging alround. .

Applying two coat of french polish to complete peg table after necessary preparation of surfaces. The colour of polish/Vanish shall be Melamine/Deep Brown / Wall Nut or as approved by the GE. The colour of prelaminated particle board shall be approved by GE.

Table Bed Side (FD-276)

M & L for carrying out repair/replacement of following parts of Table bed side as per drawing after dismantling the old parts complete all as specified :-

Supplying and fixing of 12 mm thick ply wood with one side teak finish.

Supplying and fixing of 6 mm thick ply wood commercial at back

Supplying and fixing of 12 mm thick ply wood commercial at bottom

Supplying and fixing of 12 mm thick ply wood commercial at shelves

Supplying and fixing top of 18/19mm thick prelaminated particle board ISI Marked standard exterior grade and 6 mm thick Teak edging alround the front and top.

Applying two coat of french polish to complete table bed side including necessary preparation of surfaces. The colour of polish/Vanish shall be Melamine/Deep Brown / Wall Nut or as approved by the GE. The colour of prelaminated particle board shall be approved by GE.

TABLE WRITING (FD-275)

M & L for carrying out repair/replacement of following parts of Table writing as per drawing after removing the old parts complete all as specified and shown on drg :-

Supplying and fixing top of the table with 18mm thick prelaminated particle board ISI Marked, including 6mm thick Teak beading all around.

Legs using Teak wood (MP Teak).

Rails using teak wood (MP Teak).

Front of drawer and shutter of cabinet using 18mm thick prelaminated particle board (One side teak finish).

Shutter of cabinet using 18mm prelaminated particle board (One side teak finish and other side white balancing laminated).

Sides bottom and shelf of cabinet using 12mm thick pre-laminated particle board as per drg

Bottom of drawer and side of cabinet using 6mm thick commercial ply wood.

Supply and fixing knobs to drawers.

Applying two coat of french polish after preparation of surfaces. The colour of polish/Vanish shall be Melamine/Deep Brown / Wall Nut or as approved by the GE. The colour of prelaminated particle board shall be approved by GE.

TABLE 3X2 WITH/WITHOUT DRAWER (FD-284)

M & L for carrying out repair/replacement of following parts of Table 3x2 without drawer as per drawing after removing the old unsv parts complete all as specified and shown on drg :-

Supplying and fixing top of the table with 18mm thick prelaminated particle board ISI Marked, including 6mm thick Teak beading all around.

leg using teak wood (MP Teak).

Long side rails using teak wood (MP Teak).

Short side rails using Teak wood (MP Teak).

Stiffiners using Teak wood (MP teak).

Supply and fixing knobs to drawers.

Applying two coat of french polish to article after preparation of surfaces. The colour of polish/Vanish shall be Melamine/Deep Brown / Wall Nut or as approved by the GE. The colour of prelaminated particle board shall be approved by GE.

BED PLY WOOD TOP (FD- 246)

M & L for carrying out repair/replacement of following parts of Bed Ply Top as per drawing after dismantling the old parts complete all as specified

S & F Long rail made out of first class hard wood (Teak).

S&F short rails made out of first class hard wood (Teak) as per drg

Head Board complete with legs as per sample.

Foot Board complete with legs as per sample.

S & F Ply wood top made out of 12mm thick commercial ply wood of ISI marked .

Teak Face Ply of Size 04mm Of Head Wing Board

Teak Face Ply of Size 04mm Of foot Wing Board

Cleaning and preparing old polished surface of Bed ply top and apply two coats of french polishing to give a glossy finish complete all as specified and as directed by Engineer-in-Charge. The colour of polish/Vanish shall be Melamine/Deep Brown / Wall Nut or as approved by the GE. The colour of prelaminated particle board shall be approved by GE.

TABLE OFFICE OFFICER's WOODEN (DB-4114)

S&F in replacement following parts to table office officer's complete all as specified and shown on drgs after removing the old broken part.

S & F Top 5'x3' made out of 18mm thick prelaminated particle board exterior grade, ISI marked fixed with mild steel screws as per size and shape including 4mm thick teak wood beading all around.

S & F Legs made of first class hard wood (Teak)

S & F Front rails made of first class hard wood (Teak)

S & F Side rails made of first class hard wood (Teak)

S & F drawer made of first class hard wood (teak) as per drg

S & F lock as per drg

S & F of knob to the drawers of the table.

Cleaning and preparing old polished surface of table office officer wooden and apply two coats of french polishing to give a glossy finish complete all as specified and as directed by Engineer-in-Charge. The colour of polish/Vanish shall be Melamine/Deep Brown / Wall Nut or as approved by the GE. The colour of prelaminated particle board shall be approved by GE.

SIDE BOARD (FD-241)

M & L for carrying out repair/replacement of following parts of Side Board as per drawing after dismantling the old parts complete all as specified.

Top made out of 18mm thick prelaminated particle board exterior grade, ISI marked fixed with mild steel screws as per size and shape including 4mm thick teak wood beading all around.

S & F Back made out of 6mm thick commercial ply wood

S & F side made out of 18mm thick prelaminated particle board

S & F Front of drawers made out of 18mm thick prelaminated particle board

S & F Door shutters made out of 18mm thick block board with 6 mm thick teak wood edging all around of doors

S & F of new knob/handle as per sample.

S & F of new ball catcher as per sample.

TABLE DRESSING LADIES WITH MIRROR (FD-251)

M & L for carrying out repair/replacement following parts to table dressing ladies with mirror, complete all as specified and shown on drgs after removing the old broken part.

S & F Mirror 5.5mm thick electro copper plated of polished plate size 365x1220mm

S & F Frame of mirror made out of teak wood of size 25 x 19mm.

S & F Top made out of 18mm thick prelaminated particle board exterior grade, ISI marked fixed with mild steel screws as per size and shape including 4mm thick teak wood beading all around.

S & F Drawers of table.

S & F Sliding glass of table.

S & F chnnel made out of aluminum for fixture for siliding glass .

S & F Knobs as per sample.

Cleaning and preparing old polished surface of table dressing ladies with mirror and apply two coats of french polishing to give a glossy finish complete all as specified and as directed by Engineer-in-Charge. The colour of polish/Vanish shall be Melamine/Deep Brown / Wall Nut or as approved by the GE. The colour of prelaminated particle board shall be approved by GE.

TABLE CENTRE/TABLE CENTRE TWO TIER (FD-274)

M & L for carrying out repair/replacement following parts to table centre, complete all as specified and shown on drgs after removing the old broken part.

Top 900x450mm made out of 18mm thick prelaminated particle board exterior grade, ISI marked fixed with mild steel screws as per size and shape including 4mm thick teak wood beading all around.

S & F Legs made out of first class hard wood (Teak)

S & F Long rails made out of first class hard wood (Teak)

S & F Short rails made out of first class hard wood (Teak)

S & F Stiffners of table centre made out of first class hard wood (Teak)

Cleaning and preparing old polished surface of table centre and apply two coats of french polishing to give a glossy finish complete all as specified and as directed by Engineer-in-Charge. The colour of polish/Vanish shall be Melamine/Deep Brown / Wall Nut or as approved by the GE. The colour of prelaminated particle board shall be approved by GE.

S & F of ply wood of 6mm thick commercial for 2 tire table.

TABLE DINING FOR 6/8 PERSONS (FD-273)

M & L for carrying out repair/replacement following parts to table dining for 6 persons, complete all as specified and shown on drgs after removing the old broken part.

Top 1500x900mm made out of 18mm thick prelaminated particle board exterior grade, ISI marked fixed with mild steel screws as per size and shape including 4mm thick teak wood beading all around.

S & F Legs square shape made out of first class hard wood (Teak).

S & F Long rails made out of first class hard wood (Teak)

S & F Short rails made out of first class hard wood (Teak)

Cleaning and preparing old polished surface of table dinning 6 pers and apply two coats of french polishing to give a glossy finish complete all as specified and as directed by Engineer-in-Charge. The colour of polish/Vanish shall be Melamine/Deep Brown / Wall Nut or as approved by the GE. The colour of prelaminated particle board shall be approved by GE.

SOFA SET THREE SEATER/SINGLE SEATER WITH DETACHABLE CUSHION (FD-281/ FD-373)

M & L for carrying out repair/replacement of following parts of Sofa set three seater /single seater with detachable cushion as per drawing after dismantling the old parts complete all as specified

S & F of long rails of seat for three seater sofa of size 1590mmx100mmx35mm of 1st class hardwood (MP teak) duly plained and smoothed with sand paper.

Side rail of seat but single seat size 575mm x 100mm x 35mm using Teak wood (MP Teak).

Long rails of back for three seater sofa size 1590 mm x100mmx35mm of using Teak wood (MP Teak).

S & F in replacement of arms for Single / Three seater sofa of size 35mm x 70mm (cross section) of 1st class hard wood (MP Teak) complete all as specified and shown on drgs after removing the old broken arms.

Do but batten of size 50mm x 20mm.

M & L for applying two coat of french polish after preparation of surface complete to sofa 3 seater. The colour of polish/Vanish shall be Melamine/Deep Brown / Wall Nut or as approved by the GE. The colour of prelaminated particle board shall be approved by GE.

M & L for applying two coat of french polish after preparation of surface complete to sofa single chair.

S & F sofa foam cushion 40 density, 100mm thick of standard size covered with tapestry cloth not less than Rs. 180/- per meter as approved by GE. Cushion cover duly stiched with one side Jip.

Chair writing/CBA (FD-280 & 250)

M & L for carrying out repair/replacement following parts to Chair writing/CBA, made out of 1st class hard wood (Teak) complete all as specified and shown on drgs after removing the old broken part.

S & F Front Legs.

S & F Rear Legs.

S & F Front Rails.

S & F Side Rails.

S & F Back Rails.

S & F Arms.

S & F Stiffners.

M & L for applying two coats of french polish to Chair writing/CBA after preparation of surface complete all as specified. The colour of polish/Vanish shall be Melamine/Deep Brown / Wall Nut or as approved by the GE. The colour of prelaminated particle board shall be approved by GE.

Recanning of Chair Writing/CBA with plastic cane (Oval Shape) 2mm wide and Border 4mm complete as per Godrej pattern using brand cane (Removing of old broken cane shall be done at BSO Yard.

Chair Dinning (FD-279)

S & F in replacement of following parts to chair Dinning/CBB made out o 1st class hard wood (Teak) complete all as specified and shown on drgs after removing the old broken part.

S & F Front legs.

S & F Rear Legs.

S & F Front Rails.

S & FSide Rails.

S & F Back Rails.

S & F Stiffners.

M & L for applying two coats of french polish to Chair Dinning/CBB after preparation of surface complete all as specified. The colour of polish/Vanish shall be Melamine/Deep Brown / Wall Nut or as approved by the GE. The colour of prelaminated particle board shall be approved by GE.

Recanning of Chair Chair Dining with plastic cane (Oval Shape) 2mm wide and Border 4mm complete as per Godrej pattern using brand cane (Removing of old broken cane shall be done at BSO Yard.

Chair Easy (FD-229)

S & F in replacement following parts to chair Easy, made out of 1st class hard wood (Teak) duly french polished complete all as specified and shown on drawings after removing the old broken part.

S & F Front legs

S & F Rear legs.

S & F Front Rails of seat.

S & F Side Rails of seat.

S & F Back Rails of Back.

S & F Arms of Chair easy

M & L for applying two coats of french polish to Chair Easy after preparation of surface complete all as specified. The colour of polish/Vanish shall be Melamine/Deep Brown / Wall Nut or as approved by the GE. The colour of prelaminated particle board shall be approved by GE.

Recanning of Chair Chair Easy with plastic cane (Oval Shape) 2mm wide and Border 4mm complete as per Godrej pattern using brand cane (Removing of old broken cane shall be done at BSO Yard.

TABLE DINING 120 X 90 CM (FD-284)

M & L for carrying out repair/replacement of following parts of Table 120 x 90 cm as per drawing after dismantling the old parts complete all as specified :-

Supplying and fixing top of the table with 18/19mm thick prelaminated particle board ISI Marked standared exterior grade as in top of the table including 6mm thick Teak beading all around .

Supplying and fixing of legs of Teak wood.

Supplying and fixing of long side rails of Teak wood.

Supplying and fixing of short side rails of Teak wood.

Supplying and fixing of stiffeners Teak wood.

Applying two coat of french polish after preparation of surfaces. The colour of polish/Vanish shall be Melamine/Deep Brown / Wall Nut or as approved by the GE. The colour of prelaminated particle board shall be approved by GE.

Table Bed Side (FD/E6/MAP/15'R')

M & L for carrying out repair/replacement of following parts of Table Bed Side as per drawing after removing the old unservicable parts complete all as specified:-

Top using 18mm thick prelaminated particle board to table bed side ISI marked and 6mm thick edging shall be provide all around the top all as shown on drg.

Both side using 18mm thick prelaminated particle board ISI marked and 6mm thick teak edging all around.

Side of drawers using 12mm thick commercial plywood ISI marked.

Bottom of drawers using 6mm thick commercial plywood ply

Back of table using 6mm thick plywood commercial ply.

S & F aluminium handle to drawers.

S & F hard rubber/PVC shoes to each legs.

S & F steel channel to each drawer for movement of pull out tray all as specified and directed.

Applying two coat of french polish (ready made) to article after necessary preparation of surfaces. The colour of polish/Vanish shall be Melamine/Deep Brown / Wall Nut or as approved by the GE. The colour of prelaminated particle board shall be approved by GE.

SCHEDULE 'A' PART-III (STEEL FURNITURE)

Locker Bed Side Steel (FD-1029/257)

Taking out of unsv Handle and S&F New Handle including steel nut and bolt with washer complete as per existing shape ,size and as per Drg.

Taking out of unsv Butt Hinges and S&F New Butt Hinges complete as per existing shape ,size and as per Drg.

Taking out of unsv Hasp and Staple and S&F New hasp and staples complete as per existing shape ,size and as per Drg.

Taking out of unsv Hanging Rod of conduit Pipe and S&F New Hanging Rod with bracket complete as per existing shape,size and as per Drg.

Adjustment of existing shelves by providing New clamps/clips after removing the old unsv clamps/clips as per existing shape, size and as per drg.

After preparation of surface rubbing denting and painting of locker steel inside and outside as per drg.

S & F new legs instead of old rusted/unsv legs as per existing shape and size and as per drg.

Almirah large steel with shelves (FD-67/351/1031)

Taking out of unsv Handle and S&F New Handle including Nut and Bolt with Washer complete as per existing shape ,size and as per Drg.

Taking out of unsv Lock and S&F New Lock with Duplicate Key complete as per existing shape ,size and as per Drg.

Adjustment of existing shelves by providing New clamps/clips after removing the old unsv clamps/clips as per existing shape,size and as per drg.

Painting after preparation of surface denting and painting of almirah large steel with shelves complete inside and outside.

S & F new legs instead of old rusted/unsv legs as per existing shape and size and as per drg.

Table office Clerk Steel (FD-84(M),381, 307, 1104)

Taking out unsv Top and S&F New Top of Prelaminated Particle Board/MDF Board Exterior Grade 18mm one side Teak Face and other side white with 04 mm Teakwood beading all around it complete as per Drg.

Taking out of unsv Drawer and S&F new Drawer 01mm thick plain black steel as per existing shape and size.

Taking out unsv Lock of Drawer and S&F new Lock as per Drg.

Taking out old unsv Shoes/Toes and S&F new Hard Rubber/ PVC Shoes / Toes as per Drg.

After preparation of surface rubbing denting and painting of table office clk steel inside and outside as per drg.

Table office officer steel (FD- 84(M), 1002, 1003,306)

Taking out unsv Top and S&F New Top of Prelaminated Particle Board/MDF Board Exterior Grade 18mm one side Teak Face and other side white with 04 mm Teakwood beading all around it complete as per Drg.

Taking out of unsv stiffner and S&F new stiffner of mild steel square tube 25mm as per existing shape and size.

Taking out unsv Drawer and S&F new Drawer of mild steel square tube 25mm as per existing shape and size.

Taking out unsv Lock of Drawer and S&F new Lock as per Drg.

Taking out old unsv Shoes/Toes and S&F new Hard Rubber/PVC Shoes Toes as per Drg.

After preparation of surface denting and painting of table office officer as per Drg.

Table 3'x2' with/without Drawer Steel (FD-283,1008, 223,310,1007)

Taking out unsv Top and S&F New Top of Prelaminated Particle Board/MDF Board Exterior Grade 18mm one side Teak Face and other side white with 04 mm Teakwood beading all around it complete as per Drg.

Taking out of unsv Drawer and S&F new Drawer of mild steel squre tube 25mm as per existing shape and size.

Taking out unsv Lock of Drawer and S&F new Lock as per Drg.

Taking out old unsv Shoes/Toes and S&F new Hard Rubber/PVC Shoes Toes as per Drg.

Painting of Table 3'x2' with/ without Drawer Steel as per Drg.

Charpoy GI Pipe with 12mm thick plywood top (FD - 220)

M&L for repairing of unsv parts and fixing new parts for items as mentioned below :-

plywood top made out of 12mm thick commercial type BWR exterior grade as per existing shape and size complete all as directed by Engr-in-Charge.

Removing of existing unsv broken long rails of charpoy GI pipe and supply and fixing new long rails made out of GI tubing 32mm dia (medium Grade ISI Marked) all as specified and shown on drg.

Making out short rail from broken long rail obtained from Ser No. (6.02) abvoe fixing to the charpoy GI pipe complete all as specified and shown on drg including removing exisiting broken u/s short rails.

Making out legs from broken short rail obtained from Ser No. (6.03) above and fixing to the charpoy GI pipe complete all as specified and shown on drg including removing existing broken u/s legs.

Removing the existing unsv broken elbows of charpoy GI pipe and supplying and fixing new 32mm bore 3 way elbows ISI marked all as specified and shown on drg.

Supply and fixing 05mm thick GI check nuts suitable for 32mm dia pipe all as specified and shown on drg.

Almirah small steel with shelves (FD-243/ 1032)

Taking out of unsv Handle and S&F New Handle including Nut and Bolt with Washer complete as per existing shape ,size and as per Drg.

Taking out of unsv /rusted shelves and S&F new shelves dully painted completed as per existing shape, size and as per Drg.

Taking out of unsv Lock and S&F New Lock with Duplicate Key complete as per existing shape ,size and as per Drg.

Painting after preparation of surface denting and painting of almirah small steel with shelves complete inside and outside.

S & F new legs instead of old rusted/unsv legs as per existing shape and size and as per drg.

Teapoy Verandah (FD-255/383)

Supply & Fix 18/19mm thick pre laminated pratical board one side T/F other side white alongwith 4mm thick teak wood beading all around the top of tepoy verandah after dismantling old damage/unserviceable top all as shown drg all as specified and directed.

Painted the whole steel frame with enemle paint after the preparation of whole surface.

S&F hard rubber shoes to legs

Chair Verandah (FD-256)

M & L of Welding 'U' shape legs with arms of conduit pipes 20mm dia 16 gauge thick all as specified & shown on drg.

Welding broken joints of 20mm dia 16 gauge thick conduit pipe of chair verandan.

S&F hard rubber toes to legs as per sample.

Preparation of old painted surfaces for painting to chair and apply one coats of white synthetic enamel paint to framed chair verandah complete all as specified

Recanning of verandah chairs with plastic cane (Oval Shape) 4mm wide complete as per Godrej pattern using brand cane (Removing of old broken cane shall be done at BSO Yard.

Charpoy GI pipe with nylon newar (FD-220)

Supplying and taping new nylon newar best quality white/light coloured of make as approved by GE and reweaving charpoys GI pipe all as specified and shown on drg including removing existing the old newar (weight of nylon Newar shall not be less than 1.5 kg per charpoy) as required and directed by Engr-In-Charge. Note : Before taping it will be ensured that the charpoy frame is tightened properly. Unit rate quoted against this item includes this element.

Table steel 900x900x760mm (FD-1009)

S&F 18/19mm thick prelaminated particle board exterior grade with 6mm thick TW beading after dismantling old u/s runner all as shown on drg and as specifed and directed

Painting of Table steel 900 x 900x 760mm

Bed Hard Steel (MAP) (FD/E6/MAP/08)

Hard board used 18mm thick prelaminated particel board (both side decorative finish shade, standeard PVC edging (Minimum thckned 1.6mm) shall be provided alround in Head board, all as shown on drg.

Foot board used of 18mm thick prelaminated particel board (both sidedecorative finish shade, standeard PVC edging (minimum thickned 1.6mm) shall be provided alround in foot board, all as shown on Drg.

Supply hard rubber/PVC shoe to the bottom of each leg.

Top of the used of 12mm thck commercial ply wood of ISI marked and provided 4mm thick teak wood edging the ply and shall be fixed with steel nut and bolts to steel frame, all as shown in Drg.

Arneja Builders (BID ID -3164438)