Tender ID

DEFPROC

Active

Works

Electrical and Maintenance Works

REPAIR AND MAINT OF HT ELECTRIC INSTALLATION AND DISTRIBUTIONS, RMU, ACB PANELS JOINTS AND OTHER CONNECTED ITEMS AT SUBATHU UNDER GE KASAULI

E-IN-C BRANCH - MILITARY ENGINEER SERVICES

SUBATHU | Solan, Himachal Pradesh

Amount: ₹38.6 LCloses: 19 Nov 2026

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published2 Nov 2026
Submission Opens9 Nov 2026
Closes19 Nov 2026
Bid Opening23 Nov 2026

Tender Value

₹38.6 L

EMD Value

₹77,220

Closing Date

19 Nov 2026, 6:00 pm

Tender Inviting Organisation

Name

MAJ RAVI KUSH, GE KASAULI

Address

GARRISON ENGINEER KASAULI, DISTT SOLAN (HP) PIN 173204 PH 01792273107

Work Description

REPAIR AND MAINT OF HT ELECTRIC INSTALLATION AND DISTRIBUTIONS, RMU, ACB PANELS JOINTS AND OTHER CONNECTED ITEMS AT SUBATHU UNDER GE KASAULI

Tender Information

Tender ID

2026_MES_796823_1

Reference Number

GEK-97/2026-27

Tender Type

Open Tender

Product Category

Electrical and Maintenance Works

Form of Contract

Item Rate

Period of Work

180 days

Location

SUBATHU

Source Website

Subscribe to view

Eligibility / Pre-Qualification

PLEASE REFER TENDER DOCUMENTS

Documents Required

9 documents required · 9 mandatory

Fee/PreQual/Technical

RequiredSCANNED COPY FOR REQUEST OF ISSUE OF TENDER ON LETTER HEAD OF FIRM (.pdf)

RequiredSCANNED COPY OF DD TOWARD COST OF TENDER (.pdf)

RequiredSCANNED COPY OF GST REGISTRATION NUMBER (.pdf)

RequiredSCANNED COPY OF ENLISTMENT LETTER (.pdf)

RequiredSCANNED COPY OF EPFO NO. (.pdf)

RequiredCONTRACTOR OF ONE CLASS BELOW OF THE ELIGIBLE CLASS SHALL UPLOAD DETAILS OF WKS IN HAND AS CA NO, CA (.pdf)

RequiredREQUISITE DOCUMENTS AS APPLICABLE FOR UNENLISTED CONTRACTOR AND EMD FOR RS. 77220/- IN FAVOUR OF GE (.pdf)

Finance

RequiredTENDER DOCUMENT (.pdf)

RequiredSCHEDULE A BOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹500

Tender Fee Payable To

GE KASAULI

EMD Fee Amount

₹77,220

Important Dates

Last Activity

2 Nov 2026

Published

2 Nov 2026

Bid Opening

23 Nov 2026

Download Starts

2 Nov 2026

Download Ends

19 Nov 2026

Submission Starts

9 Nov 2026

Clarification Period

2 Nov 2026 - 6 Nov 2026

Bill of Quantities

Item RateBoQ_Ver3.1INR

BoQ1 (171 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1.01	Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth and getting out in hard/dense soil including dressing/trimming sides and levelling/grading and ramming of bottom of excavation complete all as specified.	90	Cum	100	₹9,000
1.02	Excavation in trenches not exceeding 1.5 metre wide and depth exceeding 1.5 metre and not exceeding 3 metre and getting out in hard/dense soil including dressing / trimming sides and levelling/grading and ramming of bottom of excavation complete all as specified.	0.2	Cum	100	₹20
1.03	Returning, filling in including spreading, levelling, watering and well ramming excavated soil in layers not exceeding 25 cm thick, filling back in trenches after cables have been laid and tested, poles, stays, struts have been erected and tested complete all as specified.	86	Cum	10	₹860
1.04	Removing of surplus soil to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above starting point complete all as specified.	8	Cum	10	₹80
1.05	Supplying & fixing of double walled corrugated HDPE duct pipe,SN-6 of nominal diameter 110 mm manufactured from high density polyethylene, confirming to IS-14930 (Part-II) of approved colour with fittings for cable protection complete all as specified and direcetd.	150	RM	10	₹1,500
1.06	Taking down old unserviceable poles of any description and material & Labour for Steel tubular swaged poles with cast iron base plate, finial, taper plug, bolts, nuts and screws type 410 SP-55, 11.0 metres long, duly painted with two coats of aluminium paint over a coat of red oxide primer and providing 30 cm wide alternate black and yellow strips up to 1.5 meter from Ground Level complete all as specified. Note- Excavation, earth work and PCC shall be measured and paid separately under relevant items.	4	Each	10	₹40
1.07	Material & Labour for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) in foundation of electric poles, for base of pole , struts complete all as specified.	0.2	Cum	10	₹2
1.08	Material & Labour for PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) in foundation of electric poles, mass filling complete all as specified.	-	Cum	10	-
1.09	Material & Labour for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) in coping of electric poles complete all as specified.	0.4	Cum	10	₹4
1.1	Taking down old unserviceable Switch air break gang and material & labour for Switch air break gang operated out door HT 11 KV triple pole mechanically operated mounted on HT insulators (12 Nos insulators) type and MS galvanised steel frame with operating mechanism worked from ground level including operating rod for current rating upto 400 Amps, 11000 volts and electric rubber hand gloves 11 KV complete with locking arrangements MS clamps, bolts, nuts and washers etc. including fuse barrels of required capacity to suit the load at site including two coats of aluminium paint over a coat of red oxide primer on MS work complete all as specified.	2	Each	10	₹20

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.49 MB

Work Item Documents

TENDERDOCUGEK972627.pdf

Tender Documents • 1.06 MB

BOQ_893772.xls

BOQ • 3.34 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1.01

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth and getting out in hard/dense soil including dressing/trimming sides and levelling/grading and ramming of bottom of excavation complete all as specified.

Cum

100

₹9,000

1.02

Excavation in trenches not exceeding 1.5 metre wide and depth exceeding 1.5 metre and not exceeding 3 metre and getting out in hard/dense soil including dressing / trimming sides and levelling/grading and ramming of bottom of excavation complete all as specified.

0.2

Cum

100

₹20

1.03

Returning, filling in including spreading, levelling, watering and well ramming excavated soil in layers not exceeding 25 cm thick, filling back in trenches after cables have been laid and tested, poles, stays, struts have been erected and tested complete all as specified.

Cum

₹860

1.04

Removing of surplus soil to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above starting point complete all as specified.

Cum

₹80

1.05

Supplying & fixing of double walled corrugated HDPE duct pipe,SN-6 of nominal diameter 110 mm manufactured from high density polyethylene, confirming to IS-14930 (Part-II) of approved colour with fittings for cable protection complete all as specified and direcetd.

150

₹1,500

1.06

Taking down old unserviceable poles of any description and material & Labour for Steel tubular swaged poles with cast iron base plate, finial, taper plug, bolts, nuts and screws type 410 SP-55, 11.0 metres long, duly painted with two coats of aluminium paint over a coat of red oxide primer and providing 30 cm wide alternate black and yellow strips up to 1.5 meter from Ground Level complete all as specified. Note- Excavation, earth work and PCC shall be measured and paid separately under relevant items.

Each

₹40

1.07

Material & Labour for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) in foundation of electric poles, for base of pole , struts complete all as specified.

0.2

Cum

₹2

1.08

Material & Labour for PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) in foundation of electric poles, mass filling complete all as specified.

Cum

1.09

Material & Labour for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) in coping of electric poles complete all as specified.

0.4

Cum

₹4

1.1

Taking down old unserviceable Switch air break gang and material & labour for Switch air break gang operated out door HT 11 KV triple pole mechanically operated mounted on HT insulators (12 Nos insulators) type and MS galvanised steel frame with operating mechanism worked from ground level including operating rod for current rating upto 400 Amps, 11000 volts and electric rubber hand gloves 11 KV complete with locking arrangements MS clamps, bolts, nuts and washers etc. including fuse barrels of required capacity to suit the load at site including two coats of aluminium paint over a coat of red oxide primer on MS work complete all as specified.

Each

₹20