Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.1 LAccepted-AOC JAISALMER | JAISALMER | RAJASTHAN | 342310 | L1 | Accepted-AOC Accept | |
| 2 | L2₹40.2 L+₹72,059 (1.83%)Rejected-Finance 1286 TOTA RAM KI DHANI JAISALMER RAJ 345001 | JAISALMER | JAISALMER | RAJASTHAN | 345001 | L2 | Rejected-Finance Not being lowest | |
| 3 | L3₹40.9 L+₹1.5 L (3.69%)Rejected-Finance | L3 | Rejected-Finance Not being lowest | |
| 4 | L4₹42.7 L+₹3.2 L (8.07%)Rejected-Finance | L4 | Rejected-Finance Not being lowest | |
| 5 | L5₹43.6 L+₹4.1 L (10.4%)Rejected-Finance | L5 | Rejected-Finance Not being lowest |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
13 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Army Jaisalmer
GE Army Jaisalmer - 345001
REPAIR TO PANELLING, ALUMINIUM DOOR AND PARTITION IN CERTAIN UNITS UNDER AGE BR-III AT MIL STN JAISALMER
2023_MES_596292_1
8296/23-24/E8
Open Tender
Civil Works
Item Rate
180 days
Jaisalmer
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE Army Jaisalmer
₹98,000
Yes
7 Jul 2023
18 May 2023
20 Jun 2023
18 May 2023
13 Jun 2023
30 May 2023
Amount
Taking down chowkhats or frame with shutters (w/o taking off shutters from the frame) n. exc 1.5 sq. m each complete all as specified & directed by Engineer-in-charge.
Taking down chowkhats or frame with shutters (w/o taking off shutters from the frame) exc. 1.5 Sqm and n. exc 4 Sqm each complete all as specified & directed by Engineer-in-charge.
S&F Powder coated Aluminium anodised frame for doors, windows and ventilators with one or more rebates including joining cleat for fixing etc complete all as specified & directed by Engineer-in-charge.
S&F Powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified & directed by Engineer-in-charge.
S&F Powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified & directed by Engineer-in-charge.
Hacking out old broken glasses (any thickness, size, quality or description) from metal frame exc 1.5 Sqm including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified & directed by Engineer-in-charge.
S&F, 3mm thick, sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 sqm in each panes complete all as specified & directed by Engineer-in-charge.
S&F, 5.5mm thick, sheet glass ordinary quality and glazing in squares exceeding 0.50 sqm in each panes complete all as specified & directed by Engineer-in-charge.
S&F 9mm thick prelaminated particle board interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified & directed by Engineer-in-charge.
S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified & directed by Engineer-in-charge.
S&F in repair aluminium (die cast) body door closer hydraulically regulated, desigantion No. 3, universal type, Suitable for door shutters of 851 to 1000mm in width and weight between 61to 80 Kg complete all as specified & directed by Engineer-in-charge.
M&L for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified & directed by Engineer-in-charge.
S&F in repair 100mm brass 4 Levers mortice lock vertical type complete all as specified & directed by Engineer-in-charge.
S & F Pressed steel frames of size 105X 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified & directed by Engineer-in-charge.
S&F 35 mm thick second class hard wood factory made plain framed panelled shutter any number of panels of timber flate on both sides, with lock rail and panel of 9mm BWP commercial ply or 12mm veneered partical board with commercial veneering on both faces the size of rail and stile as per IS 1003 (Part-I) kiln seasoned and chemically pressed treated complete all as specified & directed by Engineer-in-charge.
S & F, 35 mm thick factory made second class hard wood Glazed and skeleton shutters and open rebated and prepared to receive glass, gauge etc (without sash bars), edges or framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR Part I section 8 clause 8.24 (a) supplied and fixed to chowkats complete all as specified & directed by Engineer-in-charge.
S&F in repairs stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified & directed by Engineer-in-charge.
M&L for preparing new or previously untreated wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified & directed by Engineer-in-charge.
Taking down cement or cement lime plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off the premises and leaving the work clear of any plastering complete all as specified & directed by Engineer-in-charge.
M&L for 15mm thick rendering in CM (1:6) on fair faces of brick work or concrete surfaces, finishing the surfaces even and smooth with out using extra cement complete all as specified & directed by Engineer-in-charge.
M&L for 15mm thick rendering in CM (1:4) on fair faces of brick work or concrete surfaces, finishing the surfaces even and smooth with out using extra cement complete all as specified & directed by Engineer-in-charge.
S&F anodised aluminium snap grid frame work 605x605mm for false ceiling and hangers 6mm dia, GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fastener 12.5mm dia 40mm long including 12 mm thick gypmsum board in ceiling fixed with screw as per manufacturers instructions and including dismantling boarding, any description, fixed in any position with nails complete all as specified and directed by Engineer-in-charge. Note :- (i) Main tee, cross tee shall be 35x25x1.5mm & 25x25x1.5mm respectively. Angle at end all along the walls shall be 40x25x2mm. (ii) Rate quoted by the contractor shall deemed to inclusive of frame work & ceiling board complete.
M & L preparation of new plastered surfaces of walls and applying two coat of oil bound distember over a coat of primer/ putty complete all as specified & directed by Engineer-in-charge.
M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified & directed by Engineer-in-charge.
S&F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame work and including taking down of existing wall lining and similar work as per specifications and drawing complete all as specified & directed by Engineer-in-charge.
S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified & directed by Engineer-in-charge.
S&F in repair MS powder coated drapery rod 25mm dia decorative manner all as per sample complete all as specified & directed by Engineer-in-charge.
S&F for Brackets powder coated fancy type for drapery rod complete all as specified & directed by Engineer-in-charge.
S&F steel rolling shutter (thickness of lath 1.25mm thick) without ball bearing as specified including top hood cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated complete push pull or manual type and including taking down existing rolling shutter of any thickness complete all as specified & directed by Engineer-in-charge.
S & F in repair Steel rolling shutter (thickness of lath 1.25mm thick) without ball bearing as specified including top hood cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated complete gear operated type with bevel gear box and crank handle and including taking down existing rolling shutter of any thickness complete all as specified & directed by Engineer-in-charge.
M&L for 35mm thick precast cement concrete louvers and jallies type C-0 (1:3:6) using 12.50mm graded aggregate (measured solid), including all mouldings but excluding frame, set in cement mortar 1:4 including dismantling Trellis work (Jafri) one way, including taking as under of battens in trellis (posts and rails measured separately) complete all as specified and directed by Engineer-in-charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premise complete all as specified and directed by Engineer-in-charge.
Demolition of cement concrete unreinforced in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance complete all as specified & directed by Engineer-in-charge.
M&L for 25mm thick PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in subbase of floors & finishing the surface even & fair without using extra cement complete all as specified & directed by Engineer-in-Charge.
M&L for Non Skid ceramic tiles colour jointless tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:6) for laying floor finishes complete all as specified & directed by Engineer-in-Charge.
Dismantling Stone slabs and tiles of any description or thickness in floors, laid dry and layed dry and pointed etc. complete all as specified & directed by Engineer-in-Charge.
M&L Machine cut kota stone slab flooring 20- 25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over and including screed bed or bedding layer of 15mm thick in CM (1:6) complete all as specified & directed by Engineer-in-charge.
M&L for 75 mm thick cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in sub base of flooring/ hard standing complete all as specified & directed by Engineer-in-Charge.
M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment laid over and including 25mm thick sand cushioning complete all as specified & directed by Engineer-in-charge. Note :- (i) Pattern of interlocking tile to be rubber moulded or equivalent as approved by GE. (ii) Rate quoted by the contractor shall deemed inclusive of PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) packing and finished even and fair to the sides of pavement.
M&L for providing precast cement concrete (1:3:6) type C-1 (using 20mm graded stone aggregate) in win- dow or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling). corbels, brackets etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc and setting in CM (1:4) complete all as specified & directed by Engineer-in-charge.
Dismantling stone slabs and tiles of any description or thickness in floors, laid bedded and pointed in any in any mortar mortar aprons etc. complete all as specified & directed by Engineer-in-charge.
M&L for granite of 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified & directed by Engineer-in-charge.
Dismantling wrought iron or mild steel work of any description specifically provided for gates, staircase railings, framed truss etc complete all as specified & directed by Engineer-in-charge.
S&F rolled mild steel roof trusses (framed), trussed, purlins, crane, gantries, rails and fastening and heavy bracket framing (Beams, tee, angle, channel or flat sections) including distance pieces, cleat etc conforming to Fe-410-W Gde E-250 quality-A all as specified & directed by Engineer-in-charge.
S& F for mild steel work post and struts in fencing including fabrication i.e. cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165
S&F mild steel Round bars 10mm dia & over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips conforming to Fe-410-W Gde E-250 quality-A or Fe 290 (Gd eE-165) complete all as specified & directed by Engineer-in-charge.
Supply only chain link MS galvanised fencing, any size or type complete all as specified and directed by Engineer-in-charge. Note :-Fixing only chain link fencing, steel round bars for protection will measured and paid separately.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails straining bolts, etc including provision of binding wire including dismantling fencing wire mesh, any type complete all as specified and directed by Engineer-in-charge. Note :-Supply only chain link fencing will measured and paid separately.
S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc 15cm but not.exc 22.5 cm long, diameter of neck 11 to 15mm complete all as specified and directed by Engineer-in-charge.
S&F in repair galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed by Engineer-in-charge.
M&L for preparation of new or previously untreated steel surface of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red- oxide, zinc chrome primer complete all as specified & directed by Engineer-in-charge.
S&F Pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet/ semi corrugated 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws including dismantling (AC corrugated , semi corrugated etc) AC sheets in roof coverings complete all as specified & directed by Engineer in charge.
Demolition of brickwork or stone/ boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework complete all as specified and as directed by Engr-in-charge.
M&L for squared rubble walling, Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified & directed by Engineer-in-charge.
M&L for squared rubble walling, Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) but except stone complete all as specified & directed by Engineer-in-charge. Note :- Serviceable stone obtained from demolition shall be used.
Extra over stone walling for hammer dressing to face stones with maximum depression on face from a straight edge not exceeding 20mm & dressing face beds and joints as specified to squared rubble walling Jodhpur type brought up to courses complete all as specified & directed by Engineer-in-charge.
Material and labour for flush pointing to squared rubble mansonry, uncoursed or brought upto courses in CM 1:3 complete all as specified and as directed by Engr-in-charge.
S&F in repair butt hinges 100mm size medium weight cold rolled ms in any type of chowkat or frame including welding if required complete all as specified and as directed by Engr-in-charge.
S&F in repair 100 mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed by Engr-in-charge.
S&F in repair Steel lock with two keys as per Godrej pattern complete all as specified and as directed by Engr-in-charge.
GEMRARAMCONTRACTOR
Aman Enterprises
AMBEY MAA CONSTRUCTION COMPANY
S AND S Constructions
M/S MAYA CONSTRUCTION COMPANY
M/s Shri Inder Construction Company
BHARAT CONSTRUCTION AND SERVICES
BHAGWATI CONSTRUCTION
Leelashah Enterprises
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .