1- Delhi road evam Rampur road pr pradhikaran ki vistarit simao pr retroreflective signboard lagaye jaane ka karya.

25.00 TO 30.00 M SPAN OVER HEAD STRUCTURE WITH THREE VERTICAL POST Supply, fixing & erection of builtup Overhead Structure of 25.00M to 30.00M span comprising of three vertical posts of 6.00M height (323.9 OD-2 Nos. 406.4 OD 1Nos) as vertical member welded with 10mm M.S. plate at top & 12 mm M. S. Plate at bottom. The horizontal Truss shall comprise of 50 NB heavy class M.S. pipe for main, Horizontal, Vertical Truss Pipe and 32NB heavy M.S. pipe as bracing for fixing to vertical post as per structure design & drawing with one coat of steel primer and two coats of synthetic enamel paint. The work includes construction of RCC Foundation of size 0.9X0.9M of required depth as per site condition for built up structure including Earth work in excavation, 100 mm thick Lean Concrete in 1:4:8 cement, coarse sand and 40 mm gauge stone ballast. R.C.C. with 1:2:4 Cement, Coarse Sand and 20 mm stone grit, including supply and fixing of 25 mm dia Foundation Bolts as per provisions of structure design including cost of reinforcement & shuttering. The lateral, vertical clearances and complete installation work shall be as per relevant clauses of MORT&H specifications Section 800 and IRC-67 2022 complete in all respect. The Rates shall include cost of design, fabrication, supply, transportations, Local Shifting, Erection of Signage Structure using Crane, inclusive of local taxes, royalty, etc, all T&P, machine, material and labour required for proper completion of work as per direction of Engineer in charge. MoRTH 802 (Excluding GST) Rest Conditions will be as per ENC circular No.944/MT/60MT/SAMANYA VARG/2023-24 Dated:23-01-2024.

Providing & fixing of reflective signs with a corrosion resistant 4 mm thick with 0.4 to 0.5 mm both side aluminium skin aluminium composite panel face to be fully covered with High Intensity prismatic sheeting type IV as per IRC- 07.2012 retro reflective sheeting with back frama MS angle of 35x35x5 mm. Legends, letters, numerals and borders etc should be as per MORTH specification No-801.3.7 The sheeting shall have a pressure sensitive adhesive of the aggressive tack type requiring no heat solvent other preparation for adhesion to a smooth clean surface, in a manner recommended by the sheeting manufacturer. The ACM (Aluminium Composite Materials) shall be fixed on the Back frame MS Angle with riveting, Micro prismatic type IV Retro reflective sheeting confirming to ASTM D4950-09 shall be Pressure fixed. The Retro reflective sheeting be lested for a certificate f having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage. flexibility.Iner removal, adhesion, impactcost of reinforcement & shuttering The lateral vertical clearances and Installation work shall be as per relevant clauses of MORT&H specification section 800 and IRC 67 2012 complete in all respect. The Rates shall include cost of design, fabrication, supply transportations, Local shifting Erection of Signage structure using crane, inclusive of all taxes etc. all T&P machino, material and labour required for proper completion of work as per direction of Engineer-In charge. (Based on LKO SOR Chapter-26 Item-7)ents from a reputed laboratory in India can be accepted provisionally. In such a situation, the Employer/Client, if so desires, could seek for a performance guarantee which would be released after receipt certificate meeting the requirament of three years outdoor weathering of the sheeting as per IRC 67:2012 & Proof of the same Report shall be uploaded which quoting lender. The rate shall include all matenals, labour. T&P. transportation, installation and incidentals all complete as per direction of the Engineer-in-Charge. (Based on LKO SOR Chapter-26 Item-10)

Please Enable Macros to View BoQ information