Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.0 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹31.4 L+₹41,398 (1.34%)Rejected-Finance | L2 | Rejected-Finance NOT LOWEST BIDDER | |
| 3 | L3₹31.5 L+₹49,568 (1.60%)Rejected-Finance | L3 | Rejected-Finance NOT LOWEST BIDDER | |
| 4 | L4₹31.5 L+₹50,219 (1.62%)Rejected-Finance NEAR MPEB OFFICE DHANA DISTT SAUGOR MP 470228 | DHANA | SAUGOR | MP | 470228 | L4 | Rejected-Finance NOT LOWEST BIDDER | |
| 5 | L5₹32.1 L+₹1.1 L (3.62%)Rejected-Finance | L5 | Rejected-Finance NOT LOWEST BIDDER |
Tender Value
₹39 L
EMD Value
₹78,000
Closing Date
7 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SAUGOR
GE SAUGOR
SPL REPAIRS TO BLDG NO.CET-02 INCLUDING CERTAIN REVENUE AND MINOR WORKS UNDER GE SAUGOR
2023_MES_600372_1
GE/SGR/TOK-32 OF 2023-24
Open Tender
Miscellaneous Works
Item Rate
180 days
SAUGOR
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GARRISON ENGINEER SAGAR
₹78,000
Yes
28 Aug 2023
8 Jul 2023
9 Aug 2023
8 Jul 2023
7 Aug 2023
25 Jul 2023
Amount
Demolition of cement concrete un reinforced in ground floors and paving not exc 15cm thickness below or above ground level complete all as specified and directed
Dismantling of floor, hearth or wall tiles / terrazo including cement mortar bedding complete all as specified and directed
M&L for 75mm thick PCC 1:3:6, type C2 (using 20mm graded stone aggregates) incl finished even and smooth without using extra cement as in plinth protection incl necessary form work to edges and joints to be filled with bituminous sealing compound complete all as specified and directed
M&L for plain cement concrete 1:4:8, type D2 (using 40mm graded stone aggregates) as in foundation filling and mass concrete complete all as specified and directed
M&L for approved earth filling in floors or pavings, laid in layers not exc. 15 cm thick spread, levelled & rammed including watering complete all as specified and directed
Demolition of brick work or stone/boulder masonry, built in cement mortar mortor incl all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed
M&L for brickwork with subclass 'B' bricks, straright or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.
Taking down cement plaster on brick work or stone walls, etc incl raking out joints, hacking for key, scrubbing down with watercomplete all as specified and directed
M & L for rendering 15mm thick cement plaster on wall in cement mortar 1:6 on brick wall / concrete surfaces of finishing the surfaces even and smooth without using extra cement complete all as specified and directed
M&L for rendering 10mm thick on stone masonry surfaces or surface other than fair face of brickwork in CM (1:4) and 5 mm thick in second coat including water proofing compound @ 2% by wt of cement complete all as specified and directed. Note:-Water proofing compound shall be measured and paid separately.
Supply only water proofing compound complete all as specified and directed
M & L for applying Birla/J.K wall care white putty 2mm thick for levelling the surface and two coats exterior weather coat over one coat of exterior primer over newly plastered surfaces of walls ,chajjas, complete all as specified and directed. Make Asian Apex or equivalent make as specified in Appx 'C' of Particular Specifications.
M&L for applying two coats of acrylic emulsion, white or tinted over a coat of wall primer and applying Birla / J. K. wall care white putty 2mm thick for levelling the surfaces on new wall surface including preparation of surface complete all as specified and directed
M & L for complete removal of existing treatment and applying Birla / J. K. wall care white putty 2mm thick for levelling the surfaces including properly making of 'V' shaped crakes and filling of all crakes with crakes seal of walls and applying two coat of acrylic emulsion over a coat of wall primer including preparation of old surfaces of walls complete all as specified and directed
M&L for applying three coats of white wash on newly plastered surface including preparation of new surface complete all as specified and directed
M&L for 600mmX600mmX8mm to10mm thick coloured vitrified tiles in floors set & jointed in neat cement slurry and pointed in white /coloured cement to match the tiles laid over and including15mm thick screed bed in CM 1:6 complete all as specified and directed
All as per Srl item No. 16 above but as in dado / skirting etc. over and including 10mm thick rendering in CM (1:4).
M&L for non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles laid over and including 15mm thick screed bed or beding layer in cement mortar (1:6) complete all as specified and directed
M&L for glazed ceramic tiles of size 600mmX300mmX7mm thick (joint free (rectified)) coloured, on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry and pointed in white/ coloured cement to match shade of tiles laid over and including 15 mm thick rendering in CM 1:4 complete all as specified and directed .
Dismantling Textile coverings including frames (if any) & cover fillets in ceilings (measured flat & not girthed) complete all as specified and directed
S&F GI ( cold rolled) snap grid size of 600mmX600mm frame work of 24mm x 38mm x 0.60mm, Tee Section ( bottom pre coated ) and 24mm x 24mm x 0.5mm thick angle rung along the wall incl GI suspenders wire as per manufacturer instruction as in ceiling with and including S&F coloured Non Asbestos designer ceiling cement boards 4 mm thick complete all as specified and directed.
Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) n exc 1.5 sqm each complete all as specified and directed
Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) exc 1.5 but n exc n.exc 4 Sqm each complete all as specified and directed .
S&F 125 mm X 60 mm size pressed steel frames for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of red oxide primer including cutting holes and making good in P:C:C 1.2.4 type B-1 using 20 mm graded stone aggregate including PCC 1:3:6 type C-0 using 12.5mm graded stone aggregate for filling in pressed steel frame complete all as specified and directed.
S&F 105 mm X 60 mm size pressed steel frames for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of red oxide primer including cutting holes and making good in P:C:C 1.2.4 type B-1 (using 20 mm graded stone aggregates) including PCC 1:3:6 type C-0 (using 12.5mm graded stone aggregates) for filling in pressed steel frame complete all as specified and directed.complete all as specified and as directed
S&F 35mm thick second class hardwood factory made plain framed, penelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces (the size of rail and stile as per : IS 1003 (part I), kiln seasoned and chemically pressure treated) complete all as specified and directed
S&F mild steel door shutter with MS angle iron shutters frame 35 mm X 35 mm X 5 mm in two panel covered with 1.25 mm thick MS plain black sheet welded to shutter with 2 Nos sliding door bolt of 16 mm dia 300 mm long with locking arrangement, 2 Nos of tower bolt of 200 mm longincluding MS angle iron frame 40mm x40mmx 5mm as in chowkhat with 6 Nos hold fast of flat iron 30mm X5 mm ,200 mm long with bottom flat iron of size 30mmx5mm and 100 mm size 4 Nos butt hinges including necessary cutting, welding, binding as required with two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces complete all as specified and as directed. [Single shutters of approx width 0.8 to 1.2 m and ht 1.9 to 2.10 M.]
S&F second class hardwood factory made glazed and skeleton shutters 35 mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chemfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); for doors supplied and fitted to chowkats complete all as specified and directed.
S&F galvanised mild steel wire cloth, 0.46 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.
M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed
S&F in repair pre-laminated particle board,18/19mm thick, exterior grade prelaminated one side with decorative choice lamination & other side balancing white lamination, including teak wood beads all around fixed with screws to timber frame work complete all as specified and directed
S&F continuous (piano) hinges, 30mm, mild steel, bright finish or electrogalvanised complete all as specified and directed
S&F factory made Solid PVC prelam Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet single side prelam PVC sheet wood grain printed used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with M.S. Square tube v
S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6mm raised panel design with 4mm thick moulded PVC sheet prelam on the front face & 4mm prelam PVC sheet on back face, supplying & fixing in frame centre core will be PVC battern complete all as specified and directed
S&F fixed type ventilators aluminium powder coated of frame size 50.80X 25.40mm,1.3 mm thick half portion will be fixed with 4mm thick frosted glass and half portion will be fixed with louvers with 4mm thick frosted glass with rubber gasket and aluminium beading ,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mess 0.45 mm dia to be fixed over louvers portion only including necessary cutting holes on wall and fixing arrangements complete all as directed by Engr-in- Charge (Al. section thickness 1.50 mm }
S&F aluminium windows sliding type three track powder coated consisting of frame bottom with gutter of size min 92.34 X 39 mm,sideand top of size min 92.34X29.70, shutters vertical 39X20 mm,shutter top &bottom of size min 20X39 mm ,shutter interlock min size 39X20 mm with rollers and conceled locking arrangements with 4 mm thick tinted glass with rubber gasket,brush and aluminium beading , ,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mess 0.45 mm dia etc including necessary cutting holes on wall and floor and confirming to IS complete all as directed by Engr-in- Charge (Al. section thickness 1.50 mm }
S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section complete all as specified and directed
S&F Aluminium handles 150mm size, cast type, anodised complete all as specified and directed
S&F 100mm Butt hinges, extruded aluminium aloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified and directed
S&F Aluminium alloy, anodised, sliding door bolt 250mm long dia not less then 12 mm with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed
Dismantling framed work in timber scantlings 40 sq. cm & over in section, in any position complete all as specified and directed
Dismantling unframed timber scantlings 40 sqcm & over in section, in any position complete all as specified and directed
S&F steel work in tubular trusses/purlins/posts (of round/rectangula/square hollow section)including angle cleats for jointing with welding complete all as specified and directed
S&F mild steel screw bolts (machine made) with hexagonal / square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut, length of bolt exc 22.5cm & n exc 30cm long dia of shank 11 to 15 mm complete all as specified and directed
S&F rolled mild steel Plates (plain or chequered) channels. Square cut or notched (ordinary & counter sunk) forming holes, with riveted, bolted or welded attachment Gde Fe410-0 or Fe 310-0 complete all as specified and directed
M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide Zinc chromate primer complete all as specified and directed
M&L for 16mm to18 mm thick Granite of any shade ( table rubbed and polished ) in steps, jambs, pillars, windowcills, cooking plateforms and like in cement mortor 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match shade of the slabs complete all as specified and directed
M&L for rounding/ chamferring to edges of stone slabss one edge , such as in steps , cooking plateform and other similar situations complete all as specified and directed
S&F in repair 25 mm bore PVC coated MS conduit drapery rods, suitable for door/widows curtain with fancy type powder coated ms dooms with ss brackets fitted to each end and fixed to wall incl. removal of existing rod and making good complete all as specified and directed
S&F GI tubing 15 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors all as specified and directed.including taking down 15 mm bore GI tubing and connection complete all as specified and directed .
S&F GI tubing 20 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors all as specified and directed including taking down 20 mm bore GI tubing and connection complete all as specified and directed .
Cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, in cement mortor 1:3 cutting not exceeding 10cm girth complete all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick, trapozoidal pattern of any colour having tensile strength of 550 Mpa as in roof covering/cladding in wall, fixed with self tapping screws complete all as specified and directed.
S&F 0.45 mm thick galvalume sheet precoated coloured modular ridge suitable for profile pattern sheet fixed with self driving screws including dismantling existing damaged AC sheet ridge/hip for corrugated or semi corrugated sheets from roof and taking down carefuly complete all as specified and directed
S&F in replacement rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layered wall construction hoisted & fixed in position of 500 Ltrs Capacity complete all as specified and directed
S&F in repair PVC float valve assembly including assessories with float valve 20mm dia complete all as specified and directed.
S&F in repair Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe.
S&F in repairs 110mm dia PVC(SWR) pipe single soketed in any length with adhesive jointed fixed to wall including mild steel clamps of suitable size complete all as specified.
S&Fin repairs PVC (SWR) pipe 110mm bore single socketed, in any length with adhesive joints laid in trenches or in floors complete all as specified and directed
S&F in repairs PVC (SWR) bends 110 mm dia all as specified and directed.
S&F in repairs PVC (SWR) 110 mm dia junction, single(single 'T') equal or unequal complete all as specified and directed .
S&F in repair PVC(SWR) vent cowl of 110mm dia complete all as specified and directed
S&F in repairs PVC (SWR) pipes 75mm bore single socketed, in any length with adhesive joints laid in trenches or in floors complete all as specified and directed
S&F PVC (SWR) pipes 75mm bore single socketed in any length with adhesive joints fixed to walls with suitable size mild steel clamps complete all as specified and directed
S&F in repairs PVC (SWR) bends 75mm dia complete all as specified and directed.
S&F in repairs for 75 mm dia PVC ( SWR) floor trap with grating including jointing with solvant complete all as specified and directed
S&F mild steel TMT bars 10mm dia, and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed
S&F mld steel TMT bars 6mm to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed
S&F in repairs wall mixture with bend pipe for over head shower chromium plated ,cast copper alloy complete all as specified and directed. Make:-Cera cat Part No. F3002401 or equivalent make as specified in Appx 'C' of Particular Specifications
S&F in repair 125 mm size brass chormium plated shower rose including fixing to steel pipe or union complete all as specified and directed
S&F in repairs health faucet ABS body with wall hook and 1 metre chrome plated PVC hose pipe ,cast copper alloy complete all as specified and directed. Make:- Cera cat Part No.F7020501 or equivalent make as specified in Appx 'C' of Particular Specifications
S&F in repair C P bib taps, cast copper alloy fency concealed type with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule of 15 mm boreand fixed complete all as specified and directed.
S&F in repairs 2 way bib cock with single knob 15mm dia chromium plated, cast copper alloy complete all as specified. Make:- Cera cat Part No F3002163 or equivalent make as specified in Appx 'C' of Particular Specifications
S&F in repair angular stop valve , 15mm dia, cast copper alloy,CP fancy type with long shank and cup screwd down, high pressure ,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.
S&F in repairs central hole basin mixer chromium plated 15mm dia as in wash basin (fancy type ) all as specified and directed Make:- Cera cat Part No.F2006461 or equivalent make as specified in Appx 'C' of Particular Specifications
S&F in repairs sink cock wall mounted with 170mm long swivel spout and wall flange chromium plated 15mm dia as in sink (fancy type ) complete all as specified and directed. Make:- Cera cat Part No.HT F3001251 or equivalent make as specified in Appx 'C' of Particular Specifications
S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.
S&F in repairs purposely moulded looking mirror 5 mm thick glass fixed with studs complete all as specified and directed.
S&F PVC connection on pipe 450 mm long with brass nut bolt complete all as specified and directed.
S&F in repair vitreous China wash down water closet pan (pedestal pattern)s trap and all fittings , white including white seat cover complete all as specified and directed.
S&F in repair PVC low level flushing cistern of 10 Ltr capacity including flushing pipe bend PVC bend complete all as specified and directed.
S&F in repair vitreous China WHB white flat back size 550mmx400mm including S&F angle iron brackets and waste pipe complete all as specified and directed.
S&F vitreous China full size pedastal for wash hand basin complete all as specified and directed.
S&F in repair Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x420mm with bowl size 410mm x330mm x160mm complete all as specified and directed.
S&F framed work such as grills gratings, sunshed cover fixed with nut bolts incl,cutting drilling holes etc., with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed baluster; walk ways; railings; framedwork or water tanks and similar work confirming to Fe 290 Gde E 165 complete all as specified and directed.
S&F chicken wire mesh 0.71mm dia and aperture size 25mm fixed in position complete all as specified and directed.
M&L for 25 mm thick PCC 1:2:4, type B1 (using 20mm graded stone aggregates) as in sub base of floor to receive tiles complete all as specified and directed.
M&L for plain cement concrete type C-2, 1:3:6 (using 20 mm graded aggregate) as in sub base complete all as specified and directed
M&L for glazed ceramic tiles of size 450mmx300mmx7 mm thick,(joint free (rectified)) coloured, on vertical surfaces such as skirting/dado set and jointed in neat cement slurry and pointed in white/ coloured cement to match shade of tiles laid over and including 15 mm thick rendering in CM 1:4 complete all as specified and directed .
Excavation over areas not exc 1.5 m deep and getting out soft/loose soil complete all as specified and directed
M&L for hardcore of gauge not exc. 63 mm, broken stone or boulders deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed
M&L for moorum/red bajri filling in floors or pavings laid in layers not exc 15cm thick spread levelled and rammed including watering complete all as specified and directed
M&L for PCC 1:4:8, type D2 (using 40mm graded stone aggregates), 100mm thick, as in sub base complete all as specified and directed
M&L for 100 mm thick PCC type B-2, 1:2:4 (using 40mm graded stone aggregates) surface fnished even & smooth without using extra cement complete all as specified and directed
M&L for precast cement concrete 1:1.5:3, type B1 (using 20mm graded stone aggregates) as in kitchen platform slab, shelf slab, manhole cover slab etc including necessary form work etc., complete all as specified and directed. Note : Reinforcement shall be measured and paid separately.
S&F Steel work in purlins/rafters/posts with round/rectangular/ square hollow mild steel section complete all as specified and directed
Removing excavated materials (soil) to a distance not exc. 150 m and deposting where directed, at a level not exc. 1.5m above the starting point complete all as specified and directed
Taking down copper/aluminium point wiring (light fan, socket or power) complete including fittings such as switch, sockets, c/rose, lamp holders, tube light fittings, sketch fitting , wooden boards, bell push, call bell, MCBs & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall floor complete all as specified and directed
Taking down main switch, DB/change over/VTPN, MCCB AC box of any capacity complete all as specified and directed
M&L for concealed point wiring for the following with 1.5 Sqmm PVC-FRLSH insulated, sheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit, including modular metal flush boxes & modular white cover plate with frame as per site requirement all fittings such as tees, bends, elbows, etc. of External diameter 20mm all as per site requirements PVC insulated & sheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and directed:-
One light, fan point controlled by one switch
One 5 Amp independent socket point controlled by one switch
One 3 pin ,5 Amp socket point with other switch on the same board
All as per Srl item No.100 here in before but for power point wiring using with 2.5 sqmm PVC-FR LSH insulated ,sheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,sheathed, copper conductor stranded 1100 volt grade cable as continuous earth wire -ditto-
All as per Srl item No.100 here in before but for power point wiring using with 4 sqmm PVC FRLSH insulated ,unsheathed, copper conductor stranded 1100 volt grade cable and 4 sqmm PVC insulated ,unsheathed, copper conductor stranded 1100 volt grade cable as continuous earth wire -ditto-
S&F modular switch, one way, 6 Amp 230, 1 module complete all as specified and directed
S&F socket modular 6 Amp-2/3 pin combined 2 module complete all as specified and directed
S&F switch modular, single pole, one way,16 Amp ,1 module 230 Volt complete all as specified and directed
S&F socket modular 6/16 Amp, 2/3 pin combined ,2 module 230 Volt complete all as specified and directed
S&F ceiling rose, surface backlit,three terminal complete all as specified and directed
S&F modular lamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and directed
S&F modular fan step regulator, 2 module complete all as specified and directed
S&F in replacement MCB SP 6 Amp to 40 Amp 240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed
All as per Srl item No.110 above but SPN 40 Amps, 240 V
S&F in replacement sheet metal enclosure DB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 200 Amps rated bus bar of suitable size complete all as specified and directed
S&F in replacement double door metallic sheet metal enclosure DB double door(DPX-125 ) VTPN suitable for housing 100 MCCB as incomer 4 Way 415 Volts with 200 Amps rated bus bars complete all as specified and directed
S&F in replacement MCCB 63 Amps 4 pole, suitable for 415 V breaking capacity 16 KA connected in wall/surface with wire and lugs complete all as specified and directed
S&F in replacement LED TL fitting 20/18 watt for surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver long life corresion resistance impact proof surface mounting IP66 Lumanires PC housing in opeal finish coverwith high brighness complete all as specified and directed. Make:-Havells Cat Part No LHEXBLP7PN1W020, 4 feet or equivalent make as specified in Appx 'C' of Particular Specifcations
S&F in replacement of Conventional recess mounted fitting to LED 2 X 2 ultra slip recess mounted luminaire with high brightness 36 Watt LED package and Unique pattern acrylic de-glaring diffuser sheet for glare-free uniform light distribution suitable for armstrong/grid ceiling complete all as specified and directed. Make:-Havells cat Part No PLANO2X2PLR36WLED857S or equivalent make as specified in Appx 'C' of Particular Specifcations
S&F in replacement LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. .
M&L for concealed sub main wiring with two single core PVC FRLSH insulated unsheathed stranded copper conductor cable FRLS, 02 runs of 01 Single core of size 6 sqmm (for main current) drawn in & incl PVC conduit conduit less than 20mm dia ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 6 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified including taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as specified and directed.
S&F in eplacement box type LED optic fitting 1x9 Watt 2 feet box type complete all as specified and directed. Make:- Havells Cat Part No LHEXBLP7IN1W009 or equivalent make as specified in Appx 'C' of Particular Specifcations
Taking down and refixing connecting electric meter SP up to 60 amp incl S&F suitable board close recessed type of suitable size complete all as specified and directed.
S&F LED bulb 10 watt suitable for angle / batten holder fitting complete all as specified and directed.
S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, copper winding of sweep 250MM complete all as specified and directed.
S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE five star rated with brushless direct current motor (BLDC) complete all as specified and directed.
S&F electric water heater (Geyser) ISI marked 25 Ltrs capacity AC 230V, 5 star rating branded heavy duty automatic cutoff and including electric connection lead of suitable size and length and all accessories,PVC connection pipe, grouting of nut bolt/fastner on wall and making good disturbed surface complete all as specified and directed. Make:- Racold(Andris-R)/ Havells cat part no GHWAMJSWH025/Bajaj(Calenta) or equivalent make as specified in Appx 'C' of Particular Specifcations
S&F modular AC box enclosure with socket plug top and MCB SP 25 Amps flush mounting enclosure complete all as specified and directed
M&L for provn of earthing complete with galvanised steel earth plate electrode, 600x600x6mm buried directly in ground (Earth pit not less than 2.25M deep below the GL) with top edge not less than 1.5 metres below ground level connected with galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts & washers of GI or steel all as shown in electric plate no 3 connected to earthing test point all as specified or indicated including testing on completion.Note :- (i) The rate quoted shall also deemed to include the cost of GI wire and protection pipe upto 7.5 Mtr beyond the earth plates electrode and also the cost of the Test point. (ii) Joining of GI earth wire with pipe of the test point shall be done by using suitable cable lugs complete all as specified and directed.
Supplying and laying cable XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volt grade cross sectional area 50 sqmm 3.5 core complete all as specified and directed
Excavation in trenches in hard/ dence soil not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr depth for laying of cables/poles or foundation etc and getting out complete all as specified and directed
M&L for sand cushioning with a layer of sand 80mm thick before laying of cable and 150mm thick after laying of cable to trenches complete all as specified and directed. Note:-Punned thickness shall be measured and paid
Returning filling, spreading, leveling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed
Supplying and laying un-reinforced precast concrete cable cover, class LV, type 1, flat size 250mm x 150mm x 40mm complete all as specified and directed.
S&F in replacement of GI Pipe light grade 50mm bore ISI marked on pole on wall or laid in trenches incl all fittings (nut, bolt, clamps & washers) complete all as specified and directed
Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 185 sqmm, 3.5 core complete all as specified and directed.
S&F in position galvanized iron pipe 80mm bore light grade fixed to pole with mild steel clamps of required size or laid through wall/under floor/under road/in trenches complete all as specified and directed
M&L for boring of holes under road/railway crossing, pavement, hardstanding by means of mechanical earth auger complete all as specified and as directed.
Supply, installation, connecting, commissioning and repalcement of LT panel with CPRI approved main factory fabricated LT distribution panel board, outdoor type, both side openable including loking arrangement with sliding door bolt , cubical type, 3 phase, 4 wire, 415V, factory made free standing, floor mounting, dust and vermin proof, cubical type, fabricated from 3.15 mm thick MS sheet with anticorrosive coating and finally epoxy polyster powder coating of flint grey shade fully compartmentalised design with 4Nos insulated bus bar each made of high conductivity aluminium suitable for 200 Amps, prewired with suitable size of copper cable/insulated copper strip including PCC work and Iron work for fixing arragement at site suitable earth strips conforming to IS, cable glands, lugs etc suitable for and comprising of the following including taking down old LT panel:-
(A) INCOMING (i) MCCB, 4 Pole, 415V, 50HZ 200Amps 36 KA electronic /micro processor -01 No.
M&L for earthing complete for LT Panel with galvanized mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 Mtr below ground level) with top edge of earth plate not less than 1.5 Mtr below ground level connected to galvanized iron strip 25x4mm by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, PCC (concrete chamber) 1:2:4 type B-1 using 20mm graded stone aggregate copy shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate, internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4 funnel wiht wire gauge of 22 gauge (0.68mm) 8 mesh per liner inch, 50 mm thick cover of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with 8 mm four MS bars @ 80mm centre to centre both ways and charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) and specified including provision of earth wire protected by 40mm dia medium grade pipe and watering pipe shall be 20mm bore medium grade, all excavation and earth work & connectiing the earthing to an earthing test point as specified and testing on complete all as specified & directed by Engr-in-Charge.
m/s mohansingh
M/s VIKAS TRADERS
siddhant construction
v k builder
M K Construction
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .