PROVN OF 2 TOILETS BLOCK WITH ALLIED INFRASTRUCTURE OF EXPLOSIVE AREA TO 23 FAD (MAIN) SURANUSSI, UNDER AGE (I) SURANUSSI

Amount

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in loose / soft soil all as specified and directed by Engineer - in – Charge.

Excavation in trenches not exc 1.5 m wide and not exc 1.5m deep and getting out in soft/loose soil complete all as specified

Excavation in trenches in Soft/disntegrated not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, laying of cable/pipe/pole etc or soil for shaft, walls, cesspts, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in any type of soil complete all as specified & directed by Engr-in-Charge.

M & L for PCC 1:5:10 type using 40mm agg as in foundation complete all as specified and directed by Engr-in-Charge.

M&L Brick work with sub Class'B' Bricks straight or curved on plan to any radius using old size bricks and built in CM 1:6 complete all as specified and directed by Engr-in-Charge.

M & L brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6.0m mean radius built in cement mortar 1:4 all as specified and directed by Engineer – in – Charge.

M&L Brick work with sub Class'B' Bricks straight or curved on plan to any radius using old size bricks and built in CM 1:4 as in half brick thick wallcomplete all as specified and directed by Engr-in-Charge.

Damp proof course 40mm thick In cement concrete type B-0 (1:2:4) to horizontal or vertical surfaces including necessary formwork complete all as specified and directed by Engr-in-Charge.

Returning ,filling in including spreading, levelling,watering and ramming in layers n. exc 25 cm thick each complete all as specified and directed by Engr-in-Charge.

Removal of surplus soil to a distance n.exc 50 m & depositing where directed at a level n. exc1.5 m above the starting point complete all as specified and directed by Engr-in-Charge.

M&L Reinforced cement concrete M-25 (Nominal Mix) in Slabs Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the likeand the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as directed by Engr-in-Charge.

Form work to soffits of suspended slab such as roof slab n. exc 200mm thick (horizontal or sloping ) with fair finished surface complete all as specified

Form work to edges of concrete flats,treads,floors and roofs n. exc 20cm wide and sides of RCC/PCC bands in wall, horizontal or sloping and similar works exc 10 cm but n.exc 20 cm wide complete all as specified

M & L TMT bars 10 mmm dia and over dia cut to length bent to shape required including cranking, bending and binding with and including ms wire (annealed) n. less than 0.9mm dia or securing with clips complete all as specified

M&L for rendering 15 mm thick in CM 1:6 on brick or concrete wall surfaces and surface finished even & smooth w/o using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15 mm thick in CM 1:4 on brick or concrete wall surfaces and surface finished even & smooth w/o using extra cement complete all as specified and directed by Engr-in-Charge.

M & L for 5 mm thick plaster in cement mortar 1:3 finished even and smooth without using extra cement to ceiling/chajja’s complete all as specified.

M&L for preparation of new plastered surfaces of any description not otherwise described and applying two coats of cement base paint on walls including prepration of the new surface etc complete all as specified.

M&L for preparation of new plastered surfaces of any description not otherwise described and applying three coats of white wash on ceiling complete all as specified and directed.

M&L preparing surfaces of new walls and applying two coats of oil bound distemper over a coat of primer complete all as specified

S&F solid PVC door frame of sie 50mmX47mm made out of 5mm th plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed

S&F 30mm th factory made PVC door shutter solid panel consisting of frame made out of MS tubes for top & bottom rails .Ms frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC strip of 20mm width stuck inside with solvent cement for stiles and plain colourPVC sheet for top rail , lock rail &bottom rail on either side & as gap insert for top rail & bottom rail . Panelling of plain of plain colur PVC sheet to be fitted in the MS frame welded/sealed to stiles & rails with suitable PVC sheet beading and joined together with solvent cement ,etc all as specified and shown on drawings complete all as specified and as directed by Engr-in-Charge.

S&F mild steel barrel tower bolt 200mm size stove enamelled black with bright bolt etc all as specified

S&F 150 mm size mild steel pressed handle stove enamelled black and fixed complete all as specified and as directed by engineer-in-charge.

S&F 100 mm size mild steel butt hinges medium weight cold rolled complete all as specified and as directed by engineer-in-charge.

S&F in repairs vitreous china water closet Padestal pattern( white ) includng trap but fixing bolts,excluding flushing cistern and flush pipe complete all as directed.

S&F PVC flushing cistern, 10 ltr capacity, valve less symphonic action type, low level, with intel, ball valve, float valve abd handle including brackets fixed in position, 32 mm dia PVC flush pipe and connection to water mains complete all as specified and directed by engineer-in-charge.

S&F 15 mm dia GI tubing , medium grade, and connections fixed to wall or ceiling, laid in floor etc complete all as specified and as directed by engineer-in-charge.

S&F 20 mmdia GI tubing and connections fixed to wall or ceiling, laid in floor etc complete all as specified and as directed by engineer-in-charge.

S&F in repair 15 mm bore dia bib tap long body cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for union fancy type chromium plated concealed complete all as specified and as directed by Engineer-in-charge.

S&F Pvc connection 15mm size with PTMT nuts of length 600mm complete all as specified and as directed by Engineer-in-charge.

S&F 20mm size stop valves PTMT high pressure screwed for iron pipe (make- Prayag) complete all as specified and as directed by engineer-in-charge.

S&F Rotational moulded polythene water storage tanks double layer (cylinder each vertical with closed top) of capacity 500 Itrs, hoisted and fixed in position including pvc float valve 20mm size,specified in SSR Pt-1 Make : Sintex / Frontier / Polycon

S&F PVC SWR pipe 110 mm dia laid in treanches , single socketed in any length with rubber ring joints fixed to walls etc all as specified

S&F PVC SWR pipe 75 mm dia laid in treanches , single socketed in any length with rubber ring joints fixed to walls etc all as specified

S&F 100 dia PTMT grating doom (min wt 25 gms) complete all as specified

M&L Non-skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles over15 mm th screed or bedding layer in CM 1:6 complete all as specified and directed by Engineer-in Charge.

M&L for glazed ceramic tiles colouredof size 450mmx300mm x 7mm th on vertical surfaces such as in skirting, dado etc over 10 mm th backing coat in cm 1:4

M&L for 75mm th PCC 1:3:6 type C2 as in plinth protection with using 40mm graded stone aggregate etc all as specified.

M&L Hardcore (borken bricks) of gauge n exc. 63 mm, deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface complete all as specified.

M&L for hard core of broken stone of gauge n.exc 63mm deposite and spred and levelled in layer not exc 10 CM th watered and rammed to true surface

S&F 15 mm bore Pillar taps swan neck type,fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed by engineer-in-charge.

S&F 75mm size PVC (SWR) floor trap plain with grating incl to jointing with waste pipe with adhessive etc all as specified

S& F vitrious china wash hand basin flat back 550X400mm with padestal incl fixing bracket, pvc waste coupling and waste pipe,cp pillar tap etc all as specified and directed by engineer-in-charge.

S&F vitreous china urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) urinal flat back, size of 465 x 355 x 265 mm white (minimum), with urinal spreader ,grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe)complete all as specified and directed.

S&F towel rail 600mm long of PTMT incl cp brass srews and wooden/plastic cleats (Minimum weight 190 gms) complete all as specified

S & F Steel windows or ventilators, fixed type, with glazing bars incl wire mesh and glass complete all as specified

S & F Sheet glass shelf aluminium alloy brackets and guard railassembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long

M & L for cement concrete 1:4:8 type D–2 using 40mm graded stone aggregates as in flooring finished even and smooth without using extra cement all as specified and directed by Engineer - in - Charge .

M&L Sand filling under floors or in foundations including watering and consolidation.

M & L Machine pressed precast concrete interlocking paver block with Grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed by Engr - in - Charge.

M & L Cement concrete 1:2:4 type B–1 using 20mm graded stone aggregates as in , copings, kneelers and the like including weathering, slightly rounded or chamfered angles and throating, as directed all as specified and directed by Engineer - in - Charge .

M & L 150mm dia (internal) SGSW pipes grade ‘A’ laid in trenches and jointed all as specified and directed by Engineer - in - Charge.

Cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in bed to drain pipe including packing under and haunching against the sides of pipes 150mm dia (internal) after these are laid in trenches all as specified and directed by Engineer - in - Charge.

Providing precast cement concrete type B1 1:2:4 set in C:M 1:6 in landings , cover slabs & chajjas, water troughs, shelves and similar articls with plain faces complete all as specified and directed by Engg in Charge.

Sokage well exc in ordinary soil, foundation in PCC 1:3:6 wells of honny combed and solid in M-25 concrete, incl. intercepting chember, screen chamber bricks work in CM , RCC cover slab in M-25/RR /Masonary/Filling with brick bats , complete of size 1.8 mtr dia x 3.0 m effective depth all as specified and directed by Engineer - in - Charge .

Septic Tank for 10 users with Upflow filter including media, Excavation in ordinary soil, foundation in PCC 1:2:4 brick work in CM 1:4 RCC slab covers incl. RCC Precast manhole cover having 6 mm plate embeded all around/ fiber reinficed cover with angle iron frame vent shaft & sludge chember etc complete.

Supply,Laying of XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) with aluminium conductor 1100 volts grade 10 Sqmm 2 core complete all as specified and directed by Engineer-in-charge.

M&L for sand cushioning to underground PVC/XLPE cable with sand and punning to provide required cover complete all as directed by Engr-in-Charge. (Note :- For the purpose of payment only punned thickness will be measured).

Supply & laying un-reinforced precast concrete cable cover, class LV, flat, size 250mm x 150mm x 40mm laid flat in trenches over the cable with the length of brick perpendicular to the direction of cable length, adjacent/abutting each other complete all as specified and directed by Engineer-in-charge.

S&F in repair GI pipe light grade of dia 40 mm laying in road and along with poles for cable protection complete all as directed by Engr-in-Charge. (Make :- Jindal/Tata/Prakash Surya).

45. M&L for earthing complete with galvanized steel earth electrode 60 cm x 60 cm x 6mm buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with the top edge not less than 1.5 mtr below ground level connected to galvanized iron or steel earth lead 32x6 mm dia by means of bolts, nuts, chock nuts and washers and other end connected to earthing test point including funnel, watering pipe of 20 mm bore (LG) GI pipe wire mesh, charcoal or coke and common salt in alternate layers all around the earth electrode compacted thickness 15 cm, earthing pit in PCC (1:3:6) type C1, 50 mm thick pre cast RCC cover slab (1:2:4) type B1 set in CM (1:4), reinforced with 8 mm dia TMT bars @ 15 cm c/c and suitable handle of 10 mm dia MS round bars including earth work in excavation in soft/loose soil, desposal of soil not exc. 50 meter complete and testing on completion all as shown in electrical plate No-5 of MES schedule, part-I complete all as specified and directed by Engineer-in-Charge.

Material and labour for concealed point wiring with stranded copper conductor Cable PVC insulated unsheathed 1.5 Sqmm FRLS cable in and including in PVC conduit of suitable size In stone wall with PVC boards of appropriate sizes and all requisite accessories such as PVC elbow,Tee,collers bend, PVC conduit for crossing etc. complete with PVC terminals box for mounting switches, sockets, fan regulators etc with one single core sheathed cable continuous 1.5 Sqmm,FRLS copper cable for earth wire complete all as specified and as directed for :- (a) One light point controlled by one switch with cable 1.5 Sqmm Size

(b) One Celing fan /Exhaust Fan point controlled by one switch with cable 1.5sqmm size

(c) One 5 pin socket outlet 5 Amps on the same board

All as per item No- 1 above but One 15/16 A socket outlet independent with 2.5 sq mm PVC cable and 2.5 sqmm cable as earth continuity wire.

Supply & Fixing Switch piano flush type single pole one way 6 Amp

Supply & Fixing Switch piano flush type single pole one way 15/16 Amp

Supply and fixing Socket Outlet 3 pin 6 Amp flush type.

Supply and fixing Socket Outlet 3 pin 15/16 Amp flush type.

Supply and fix ceiling rose of size 65 X 25 mm surface Bakelite three terminals complete all as specified and as directed.

S & F double door sheet metal enclosures factory made DBs 4 way,240 volts,protection class IP-43, SUITABLE FOR FIXING OF MCBs,Isolators etc,confirming as per IEC 61439-3,Suitable for flush Mounting and surface mounting, With Neutral bar,Earthbar and cable ties for cable management,fully shrouded Neutral bars,prefitted masking sheet complete all as specified and as directed

S&F LED tube light 20 Watt fitting white powder coated slim box type batten made of formed CRCA sheet with snap on installer sutable for single side connection LED tube in and including batten and tube etc complete in all respect.

Supply and fix LED light fitting 1x9W/1x10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified. Make : Crompton Greaves/ Philips/ Bajaj / Wipro

S&F MCBs Single Pole of 240 volts 6-32 Amps,10KA Capacity, 'C' Series.

S&F MCBs Single pole + Neutral 240 Volts,32 Amps,10KA Capacity 'C' SERIES.

Supply & Fix Exhaust Fan heavy duty, Steel body AC Single Phase, 230 Volts of size 450 MM Sweep with blades & frame and Louvers

Suppluy and laying in trenches, in any length, Galvanised water tubing, medium grade, nominal dia 25 mm, with all fittings, testing complete all as specified and as directed.

Supply and fixing gun-metal stop cock, valves, 25 mm bore of pipe, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

SONA BUILDERS (BID ID -3164142)