NIT No. 01 (21-22) Item No. 4

Supply of deep well Submersible pump set 10 HP,3 Phase, AC supply, working Voltage 415 V, having discharge 600 LPM at head 48 Mtr. Make-BS/ KSB/ SU/ Mody/all DJB approved make

Supply of electrical insulating mat confirming to IS 15652/2006 (Superceding IS: 5424 - 1969) B.I.S + CPRI + NTH + ERDA approved Dielectric strength 65 KV size 1M X 2M and 3.0 mm thick. Make: - Jyoti/DJB approved make

Supply of kit kat board made out of wooden having 3 Nos. 100 Amp (415 volts re-wireable) kit kat of Havells/Standard/ DJB approved make.

Ultra bright LED Tube light (single side connection) with very high efficacy - 18 Watt. Make:- Havells/Bajaj/Crompton

Supply of RCCB rating 63 Amp sensitivity 30 MA Make:- L&T,BCH,SIMENS

Supply of PVC insulated PVC sheathed, copper conductor( flexible) cable, Size 3 core x 6 Sq mm ,1100 Volts, conforming to IS 694 .Make:- Havells/Finolex/Polycab DJB approved make

Supply of LT power Aluminum cable, solid, XLPE, insulated PVC armored 650/1100 V-grade as per IS 7908 (Part-I) 1988 size 3.5 x 25 Sq mm.Make:- Havells/Gloster/Grandey/ DJB approved make

Supply of 45W. L.E.D Light energy saving & environmental friendly long life Versatile pressure die-cast aluminum IP 66 roadway laminate with high power L .E. D as light source. MAKE-HAVELLS,BAJAJ/CROMPTON

Supply of 80mm dia. B class GI pipe length 3 Mtr. With duly Welded and threaded flange in both sides, complete with cutting of flange for cable and welded support in both flanges as per site requirement. Make: - Jindal/ Parkash/ Surya/Tata/Jindal Hisar/Jindal Ghaziabad.

Supply of G.I. tail piece medium class of 0.5 mtrs long including one end flanged and other end threaded of 80mm as per site requirement.

Supply of 80mm dia. GI Bend with both side flanges duly welded and threaded as per site requirement.

Pressure Gauge of 150mm dia. size having required range with accessories such as GI fittings, Bib cock etc. required complete the work. Make:-Hguru/fibeg/DJB approved make.

Supply of M.S. Clamp of MS strip duly hole for holding the pipe of 80mm dia. with nut bolts and washer.

Supply of M.S. Bore cover made out of MS plate suitable for 10"/12" dia. bore complete with suitable hole for passing the 80mm dia. GI Pipe

Supply of CI. D.F. non rising spindle sluice valve, PN 1.0 Size 80mm dia. Make:- Kirloskar/ IVC/ DJB approved make

Supply of CI, D.F. swing checks NRV.P.N. 1.0 Size 80mm dia. Make:- Kirloskar/ IVC/ DJB approved make

Supply of Nut Bolts, Washer good quality.

Supply of electronic dozing pump (4 LPH, 10 Bar) electrically operated 230 volts, 50 Hz supply chemical grade tank of 100 Ltrs. with pipe etc. Make: - Milton Roy/ Clomax/ DJB approved make.

Fabrication/ Supply of venturi assembly 80 mm dia. with complete accessories as required at site.

Wiring for light point/ fan point/ exhaust fan point/ call bellpoint with 1.5 sq.mm FRLS PVC insulated copper conductorsingle core cable in surface / recessed medium class PVCconduit, with piano type switch, phenolic laminated sheet,suitable size M.S. box and earthing the point with 1.5 sq.mm.FRLS PVC insulated copper conductor single core cable etc. asrequired. (DSR E&M 2018 item no. 1.8.3)

Installation, testing and commissioning of pre-wired,fluorescent fitting / compact fluorescent fitting of all types,complete with all accessories and tube/lamp etc. directly onceiling/ wall, including connections with 1.5 sq. mm FRLS PVCinsulated, copper conductor, single core cable and earthing etc.as required. (DSR E&M 2018 item no. 1.41)

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earthbar, din bar, interconnections, powder painted includingearthing etc. as required. (But without MCB/RCCB/Isolator)2.3.1 6 way , Double door (DSR E&M 2018 item no. 2.3.1)

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. (DSR E&M 2018 item no. 2.12.2

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C"curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing MCB DB complete withconnections, testing and commissioning etc. as required. (DSR E&M 2018 item no. 2.10.1)

Supplying and fixing of 32 mm dia X 2.00 meters long G.I. pipe(medium class) bracket for mounting of fluorescent / HPMV /HPSV street light fitting on pole including bending the pipe to therequired shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts,bolts and washer, painting the flat iron with primer and finishpaint etc. as required (DSR E&M 2018 item no 12.34)

Workmanship Charges for lowering the submersible pump set one no. in new bore well, Fixing/Erection/Installation of E&M equipment, accessories, testing and commissioning on load with satisfactory functioning of Pump. The work includes all sundry required items for completion of work, i.e. eccentric taper, rubber gasket, necessary reinforcement and vibration isolation arrangement, etc. and loading, unloading, cartage, making good all damages caused during installation and restoring the same to their original finish as required, adequate safety provision, barricading, warning signal and other safety measures while executing the work or wherever necessary so as to avoid accident. The components of the installation shall be of such design so as to satisfactory function under all conditions. The tube well will be commissioned on automation mode and timing to be set as per direction of Engineer-in-Charge. The all sundry items which are useful & necessary for operation of Tube well in automation mode shall be deemed to have been included, whether such items are especially in specification or not.

R K CORRUGATEDBOX AND ALLIED PRODUCTS