CA NO GE/ND36/202223 REPAIR/ MAINTENANCE OF COOLING APPLIANCES, WINDOW/ SPLIT/CASSETTE TOWER TYPE AND PACKAGE TYPE ACs, DEEP FREEZERS RO AND WATER COOLER IN NAVY AREA UNDER GE NEW DELHI

Amount

Labour for checking and attending complaints of ACs, water coolers, Refrigerators etc. of any capacity, including rectification of minor defects and making the equipment functional complete all as specified and directed. Notes : 1) Any parts required for replacement shall be measured and paid separately under respective items 2) The contractor should detail minimum one AC Mechanic & one helper to attend complaints in Navy Areas 3) The complaint should be attended within 2 hours. 4) If the complaint will not attended/not completed within 2 hrs, recovery will be done as follows:- a) For 2-4 hrs @ Rs.1000/- b) For 4-12 @ Rs.2000/- c) For more than 12 hrs @ Rs.5000/- per 12 hrs

Servicing of Window type AC 1.5/2 Ton capacity of any make / model quarterly by taking out the AC, Cleaning of evaporating coil, condensing coil with water & brush to remove dust including cleaning of filter, greasing, oiling of fan motor and checking of electric circuit for smooth functioning of AC. Note: Unserviceable spares parts required to be replaced shall be measured and paid separately under respective items.

All as per item No 2.00 here-in-before but Split type AC of any type and 1.5/2 Ton capacity.

Servicing of three phase cassette type AC 4.0 Ton capacity of any make/model quarterly with indoor and outdoor unit by taking out the AC, cleaning of evaporating coil, condensing coil with water & brush to remove dust including cleaning of filter, greasing, oiling of fan motor and checking of electric circuit for smooth functioning of AC complete all as specified and as directed. Note: Unserviceable spares parts required to be replaced shall be measured and paid separately under respective items.

Supply only starting capacitor 80-100 Mfd suitable for AC 1.5 Ton complete all as specified and as directed. Make : Usha/Epcos/Havells/Tesla

Supply only starting capacitor 100-120 Mfd suitable for AC upto 2.0 Ton complete all as specified and as directed. Make : Arcos/Epcos//Tesla

Supply only Running capacitor 36 mfd 230 volt suitable for AC 1.5 Ton complete all as specified and as directed. Make : Arcos/Epcos//Tesla

Supply only running capacitor combination 50 mfd + 6 mfd 230 Volt for AC upto 2.0 Ton complete all as specified and as directed. Make : Arcos/Epcos//Tesla

Supply only Running capacitor 6 mfd 230 volt complete all as specified and as directed. Make : Arcos/Epcos//Tesla

Supply only Running capacitor 4 mfd 230 volt complete all as specified and as directed. Make : Arcos/Epcos//Tesla

Supply & charging gas refrigerant R-22/R 410 A/ R-32 or as existing to window type AC up to 2 Ton capacity including removing of leakage if any and testing complete all as specified & directed by Engineer-in-charge. Make- Mafron/Refron/Refromax

All as per item No. 11.00 here-in-before but for Split AC of any type and 1.5/2 Ton capacity.

Supply & charging the gas refrigerant R-22/R 410 A or as existing to cassette type Split AC 4.0 Ton capacity including removing of leakage if any and testing complete all as specified & directed. Make- Mafron/Refron/Refromax

Supply & fix in replacement starting relay suitable for 1.5/2 Ton capacity AC complete all as specified and as directed.

Supply & fix in replacement over load protector suitable for 1.5 Ton capacity AC complete all as specified and as directed.

Supply & fix in replacement of old unserviceable contactor 32 Amps or as requires size suitable for 4.0 Ton capacity AC complete all as specified and as directed.

Supply & fix in replacement of unserviceable over load relay suitable for 4.0 Ton capacity AC complete all as specified and as directed.

Material and labour for taking down of defective /unserviceable reciprocating compressor of split type AC capacity 1.5 TR and replacing the same with new compressor reciprocating type capacity 1.5 TR, refixing including brazing work etc, pressure testing & establishing vacuum for dehydration complete all as specified and directed by Engr-in-Charge. Make : Kirloskar/Carrier/Tecumseh/Copeland/ existing make

Material and labour for taking down of defective /unserviceable rotary compressor of split type AC capacity 1.5 TR and replacing the same with new compressor rotary type capacity 1.5 TR, refixing including brazing work etc, pressure testing & establishing vacuum for dehydration complete all as specified and directed by Engr-in-Charge. Make : Kirloskar/Carrier/Tecumseh/existing make

Material and labour for taking down of defective /unserviceable rotary compressor of window AC capacity upto 2.0 TR and replacing the same with new compressor rotary type capacity upto 2.0 TR, refixing including brazing work etc, pressure testing & establishing vacuum for dehydration complete all as specified and directed by Engr-in-Charge. Make: Kirloskar/Carrier/Copeland/existing make

Supply and fixing in replacement after taking down defective /unserviceable scroll compressor of capacity 4.0 TR , refixing new compressor of 4.0 Ton including brazing work etc, pressure testing & establishing vacuum for dehydration complete all as specified and directed by Engr-in-Charge. of three phase compressor suitable for 4.0 Ton capacity for Cassette Type AC. Make: Kirloskar/Danfoss/copeland/existing make

Supply & fix in replacement air filter synthetic/ nylon as per existing size and shape suitable for 1.5/2 Ton capacity window type ACs complete all as specified and as directed.

All as per item No 22.00 here-in-before but for Split type ACs complete all as specified and as directed.

Supply & fix in replacement item of air filter synthetic / nylon type as per existing size and shape suitable for 4.0 Ton capacity cassette type split ACs complete all as specified and as directed.

Material and labour for taking down existing unserviceable blower motor (Indoor) capacity 1/4,1/5 HP single/double shaft as per existing and refixing with new blower motor in replacement as per existing model on site suitable for Split type ACs 1.5/2 Ton complete all as specified and directed. Make:-As per existing

Material and labour for taking down existing unserviceable outdoor fan motor and fixing of new fan motor capacity 1/4,1/5 HP single/double shaft as per existing model suitable for Split type ACs 1.5/2 Ton complete all as specified and directed. Make:-As per existing

Material and labour for taking down existing unserviceable outdoor fan motor capacity upto 2 Ton and taking the unserviceable fan motor outdoor type to authorized workshop for rewinding of fan motor suitable for ACs capacity up to 2 Ton capacity with super enamelled copper winding wire of same gauge including replacement of insulating material, bushes and shaft all as specified & directed.

Material and labour for taking down existing unserviceable blower motor capacity 4.0 Ton and fixing of new blower motor in replacement single/double shaft as per existing model suitable of any make/type complete as per requirement on site all as specified. Make :As per existing.

Material and labour for taking down existing unserviceable outdoor fan motor capacity upto 4 Ton and taking the unserviceable fan motor outdoor type to authorized workshop for rewinding of fan motor suitable for ACs capacity up to 4 Ton capacity with super enamelled copper winding wire of same gauge including replacement of insulating material, bushes and shaft all as specified & directed.

Material and labour for taking down existing unserviceable outdoor fan motor of capacity 4 Ton and fixing of new fan motor in replacement old unsv fan motor suitable of any make/type complete as per requirement on site all as specified. Make :As per existing.

Supply & fix in replacement PVC insulated flexible copper conductor 3 core 1100V Grade of size 2.5 sqmm complete all as specified and as directed.

All as per item No 31.00 here-in-before but 4 sqmm.

Supply & fix in replacement condenser fan blade suitable for upto 2 Ton capacity window type ACs.

All as per item No 33.00 here-in-before but for Split ACs of 1.5/2.0 Ton capacity

Supply & fix in replacement of condenser fan blade made out of aluminium suitable for upto 4.0 Ton capacity cassette type split ACs complete all as specified & directed.

Supply & fix in replacement of evaporating air blower made out of aluminium suitable for upto 2 Ton capacity for window type AC all as specified and directed

All as per item No 36.00 here-in-before but for air blower of Split ACs of 1.5/2 Ton capacity

Supply & fix in replacement of item of evaporating air blower made out of aluminium suitable for upto 4.0 Ton capacity cassette type split ACs complete all as specified & directed.

Supply and fix in replacement of synthetic rubber tube insulation of thickness internal diameter (1/4") for refrigerant copper piping of split AC units. Make:- Supreme/Gulf-o-flex/Superlon.

All as per item No 39.00 here-in-before but internal dia (1/2")

All as per item No 39.00 here-in-before but internal dia (3/8")

All as per item No 39.00 here-in-before but internal dia (6/8")

Material and labour for replacement of front grill suitable for window type ACs upto 2 Ton capacity of any Make as per existing size and shape complete all as specified and as directed.

Supply and fix in replacement copper tubing heavy duty inner dia (1/4") for refrigerant for Split type ACs capacity upto 2 Ton. Make-Carrier/ Totalline/Mandev

Supply and fix in replacement copper tubing heavy duty inner dia (1/2") for refrigerant for Split type ACs capacity upto 2 Ton. Make-Carrier/ Totalline/Godrej

Supply and fix in replacement copper tubing heavy duty inner dia (3/8") for refrigerant for Split type ACs capacity upto 4 Ton. Make-Carrier/ Totalline/Godrej

Supply and fix in replacement copper tubing heavy duty inner dia (6/8") for refrigerant for Split type ACs capacity upto 4 Ton. Make-Carrier/ Totalline/Godrej

Material and labour for taking down existing condensing coil by removing it from existing outdoor unit by using LPG blower and fixing of new condensing coil of suitable size/capacity for 1.5/2 Ton split type ACs complete all as specified and as directed by Engr-in-Charge. Note: Work includes brazing work as required for fixing of condensing coil

Material and labour for taking down existing evaporating coil by removing it from existing indoor unit by using LPG blower and fixing of new evaporating coil of suitable size of existing make, capacity for 1.5/2 Ton split type ACs complete all as specified and as directed by Engr-in-Charge. Note: Work includes brazing work as required for fixing of condensing coil.

Material and labour for taking down existing condensing coil by removing it from existing outdoor unit by using LPG blower and fixing of new condensing coil of suitable size/capacity for 1.5/2 Ton window type ACs in replacement as per existing size/shape and as per existing make complete all as specified and as directed by Engr-in-Charge. Note: Work includes brazing work as required for fixing of condensing coil.

Material and labour for taking down existing evaporating coil by removing it from existing unit by using LPG blower and fixing of new evaporating coil of suitable size/capacity for 1.5/2 Ton window type ACs in replacement as per existing size/shape and as per existing make. Complete all as specified and as directed by Engr-in-Charge. Note: Work includes brazing work as required for fixing of condensing coil.

Material and labour for checking the leakage by feeding dry Nitrogen to maintain adequate pressure in the system, plugging the leak and charging by charge refrigerant gas R-12/22/134a for water cooler, Split type/Window type/tower/ductable AC/ Deep Freezer /Refrigerator any size any capacity as on site complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacement brass flare nut/connector heavy duty of size (1/4", 1/2",3/8",5/8) as per existing make complete all as specified and as directed.

Material and labour for Repair of processing control board (Remote control kit) with handset including replacement of current transformer, ICs, diodes, resistances, sensors etc complete for 1.5/2 Ton split type ACs of any make & model complete all as specified and as directed.

Material and labour for replacement of unserviceable display along with PCB suitable for Split type AC 1.5/2 TR with new PCB along with display unit. Make-Hitachi/Voltas/Carrier/Daikin

Material and labour for replacement of unserviceable display along with PCB suitable for Cassette Type AC 4TR with new PCB along with display unit. Make-Hitachi/Voltas/Carrier/Daikin

Material and labour for opening and taking down existing unserviceable PCB along with display unit and fixing of new PCB along with display unit suitable for Indoor unit of Inverter AC of capacity1.5/2 Ton split type AC complete all as specified and directed by Engr-in-Charge.

Material and labour for opening and taking down existing unserviceable PCB and fixing of new PCB suitable for Outdoor unit of 1.5/2 Ton split type inverter AC complete all as specified and directed by Engr-in-Charge.

Material and labour for taking down unserviceable condenser fan motor of outdoor unit inverter type and supply and fix in replacement DC motor 125 W suitable for outdoor unit of Inverter type AC of capacity 1.5/2.0 Ton complete all as specified and as directed by Engr-in-Charge

Material and labour for taking down existing unserviceable compressor of Inverter type AC 1.5/2 TR and replacement of same by new hermetically sealed rotary compressor of capacity suitable for Inverter type AC 1.5/2 Ton refixing including brazing work etc, pressure testing & establishing vacuum for dehydration complete all as specified and directed by Engr-in-Charge

Supply and fixing in replacement window AC kit 1.5/2.0 TR with sensor complete with condensing coil, remote,compressor,blower and motor suitable to existing model and make AC all as specified and directed. Make:- Carrier, Voltas, LG

Supply and fix in replacement split type AC indoor unit kit 1.5 TR capacity complete with cooling coil, blower with motor, PCB and remote complete with fixing plate suitable to existing model and make AC all as specified and directed. Make- Hitachi/Carrier/Voltas/LG.

Supply and fix in replacement split type AC outdoor kit 1.5 TR complete with condensing coil, condenser fan motor suitable to existing model and make iron grill, suitable for outdoor unit and flair nuts for connection of Copper pipe all as specified and directed. Make- Hitachi/Carrier/Voltas/LG

Supply & fix in replacement direction changer louver motor ( swing motor) suitable for split type ACs 1.5/2 capacity as per existing make and model

Supply & fix in replacement cordless Remote for inverter type ACs suitable for 1.5/2 Ton AC as per sample. Make- Hitachi/Voltas/Carrier

Supply & fix in replacement cordless Remote for ACs suitable for 1.5/2 Ton AC as per sample. Make- Hitachi/Voltas/Carrier

Servicing of Ductable type AC 11 (5.5*2) Ton capacity complete (quarterly) with blower motor dismantling all parts and refixing after cleaning and replacement of defective parts, dismantling the cover of condensing coil carefully and carryout servicing, cleaning the external surface (both side) and fan of the unit out side of the equipment like base plate runner fan blade thoroughly with the help of descaling chemical, brush, water and dry properly including using air blower for cleaning air dust deposited on the equipment and re-fixing the same after repair complete all as specified. Note:- Spare parts shall be measured and paid separately.

Material and labour for taking down existing unserviceable compressor and fixing in replacement new Reciprocating compressor suitable for 5.5 Ton capacity ductable type refixing including brazing work etc, pressure testing & establishing vacuum for dehydration complete all as specified and directed by Engr-in-Charge. Make: Kirloskar/Tecumsheh/Copeland/Danfoss/existing make

Supply & charging the gas refrigerant R-22/R 410 A or as existing to Ductable type AC's of capacity 11 (2x5.5) Ton capacity including removing of leakage if any and testing complete all as specified & directed.

Supply and fix in replacement of LP cut-out suitable for Ductable type ACs of capacity 11 (2x5.5) Ton complete all as specified.

Supply and fix in replacement of HP cut-out suitable for Ductable type ACs of capacity 11 (2x5.5) Ton complete all as specified.

Supply and fix in replacement of expansion valve suitable for Ductable type ACs of capacity 11 (2x5.5) Ton complete all as specified.

Material and labour for taking down of unserviceable PCB and transporting it to authorized workshop for its repair complete along with necessary accessories like diodes, resistors, capacitors for PCB card suitable for package type AC's of capacity 11 (2x5.5) Ton complete all as specified and as directed by Engr-in-Charge.

Material and labour for opening and taking down existing unserviceable PCB and fixing of new PCB suitable for 11(2X5.5) Ton ductable AC complete all as specified and directed by Engr-in-Charge.

M&L for repair/maint and servicing of micro roster based panel of ductable AC of capacity 11(2X5.5) ton complete including replacement of faulty diode,resistance,solenoid coil complete all as specified and as directed by Engr-In-Charge.

Material and labour for taking down existing unserviceable fan blade and replacement of new condenser fan blade made out of aluminium/plastic suitable for package type AC's of capacity 11 (2x5.5) Ton complete all as specified and as directed by Engr-in-Charge.

Material and labour for taking down existing unserviceable blower and replacement by new evaporating air blower made out of aluminium/plastic suitable for package type AC's of capacity 11 (2x5.5) Ton complete all as specified and as directed by Engr-in-Charge..

Material and labour for taking down unserviceable fan motor and supply and fix in replacement new fan motor single/double shaft as per existing model suitable for package type AC's of capacity 11 (2x5.5) Ton complete all as specified and as directed by Engr-in-Charge.

Supply and fix in replacement air filter synthetic / nylon type as per existing size and shape suitable for package type AC's of capacity 11 (2x5.5) Ton complete all as specified and as directed by Engr-in-Charge.

Servicing of Water cooler of 40,60,120,150 ltr capacity of any make / model quarterly by cleaning of evaporating coil, condensing coil with water & brush to remove dust including cleaning, greasing, oiling of fan motor and checking of electric circuit for smooth functioning complete all as specified and directed by Engr-in-Charge

Supply & charging the gas refrigerant R-134 or as existing to water coolers up to 150 ltr capacity including removing of leakage if any and testing complete all as specified & directed

Taking down of defective /unserviceable reciprocating compressor of Water Cooler 60-150 L and replacing the same with new compressor reciprocating type capacity upto 60-150 Ltrs, refixing including brazing work etc, pressure testing & establishing vacuum for dehydration complete all as specified and directed by Engr-in-Charge. Make:- Kirloskar/Tecumseh/Copeland/Emersons

Material and labour for taking down existing condensing coil from water cooler any capacity and replacement by new Condenser coil as per existing capacity including brazing and dehydration by creating vacuum for more than 24 Hrs so that no oil/sludge remains in the cooling coil/system. Complete all as specified and as directed by Engr-in-Charge.

Material and labour for taking down fan motor of water cooler capacity upto 150 Litres and replacement of the same by new fan motor as per existing on site upto capacity 150 litres along with fan blade and along with all mountings complete all as specified and as directed by Engr-in-Charge.

Servicing of Refrigerators of 165 to 310 ltr capacity single door of any make / model quarterly by cleaning of condensing coil with wire & brush to remove dust including checking of electric circuit for smooth functioning complete all as specified and directed by Engr-in-Charge.

Material and labour for taking down existing unserviceable condensing coil from Refrigerators of any capacity and replacement by new Condenser coil as per existing capacity upto 310 Ltrs including brazing and dehydration by creating vacuum for more than 24 Hrs so that no oil/sludge remains in the cooling coil/system. Complete all as specified and as directed by Engr-in-Charge.

Material and labour for taking down unserviceable fan motor of refrigerators of any capacity upto 310 Litres and replacement of the same by new fan motor as per existing on site upto capacity 310 litres along with fan blade and along with all mountings complete all as specified and as directed by Engr-in-Charge.

Material and labour for Taking down of defective /unserviceable reciprocating compressor of Refrigerator capacity upto 310 Ltrs and replacing the same with new compressor reciprocating type capacity 310 Ltrs, refixing including brazing work etc, pressure testing & establishing vacuum for dehydration complete all as specified and directed by Engr-in-Charge. Make : Kirloskar/LG/Tecumseh

Supply & charging the gas refrigerant R-134a or as existing to Refrigerators up to 310 ltr capacity including removing of leakage if any and testing complete all as specified & directed

Supply & fix in replacement of unserviceable starting relay suitable for 165 to 310 ltr capacity Refrigerator

Supply & fix in replacement of unserviceable over load protector suitable for Refrigerator capacity upto 310 ltrs

Supply & fix in replacement thermostat switch suitable for Refrigerator capacity upto 310 L

Material and labour for Servicing of Deep fridge upto capacity 1300 Ltr 2/3/ 4 door of any make / model quarterly by cleaning of condensing coil with wire & brush to remove dust ,oiling and greasing as required including checking of electric circuit for smooth functioning complete all as specified and directed by Engr-in-Charge

Supply & charging the gas refrigerant R-134a or as existing to Deep Freezers up to 1300 ltr capacity including removing of leakage if any and testing complete all as specified & directed

Material and labour for taking down existing unserviceable condensing coil from Deep freezers of any capacity and replacement by new Condenser coil as per existing capacity upto 1300 Ltrs including brazing and dehydration by creating vacuum for more than 24 Hrs so that no oil/sludge remains in the cooling coil/system. Complete all as specified and as directed by Engr-in-Charge

Material and labour for taking down unserviceable condenser fan motor of deep freezer of capacity 1300 Litres 4 door and replacement of the same by new fan motor as per existing on site upto capacity 1300 litres along with fan blade and along with all mountings complete all as specified and as directed by Engr-in-Charge

Material and labour for taking down unserviceable condenser fan motor of deep freezer of capacity upto 492 Litres and replacement of the same by new fan motor as per existing on site upto capacity 492 litres along with fan blade and along with all mountings complete all as specified and as directed by Engr-in-Charge

Material and labour for Taking down of defective /unserviceable reciprocating compressor of Deep freezers of capacity upto 492 Ltrs and replacing the same with new compressor reciprocating type capacity upto 492 Ltrs, refixing including brazing work etc, pressure testing & establishing vacuum for dehydration complete all as specified and directed by Engr-in-Charge Make : Kirloskar/LG/Tecumseh/Copeland

Material and labour for Taking down of defective /unserviceable reciprocating compressor of Deep freezers of capacity upto 1300 Ltrs 4 door and replacing the same with new compressor reciprocating type capacity upto 1300 Ltrs, refixing including brazing work etc, pressure testing & establishing vacuum for dehydration complete all as specified and directed by Engr-in-Charge Make : Kirloskar/LG/Tecumseh/Copeland

Supply & fix in replacement of unserviceable starting relay suitable for 165 to 1300 ltr capacity Deep freezer

Supply & fix in replacement of unserviceable over load protector suitable for Deep freezer capacity upto 1300 L

Supply & fix in replacement thermostat switch suitable for Deep Freezer upto 1300 L

Collecting the U/S single phase voltage stabilizer of capacity from 02 KVA to 05 KVA from MES complaint cell to local workshop/in-situ for repair and open the stabilizer taking out u/s spare parts incl replacement of the same with new one, incl testing complete all as specified and directed. (Note: Replacement of spare parts will be measured and paid separately. )

Supply & Fix in replacement of relay for voltage stabilizer suitable for 2 KVA to 5 KVA capacity stabilizer

Supply & Fix in replacement of printed circuit board ( PCB) suitable upto 5 KVA capacity stabilizer

Supply & Fix in replacement of main transformer suitable upto 5 KVA capacity stabilizer

Supply & Fix in replacement of for voltmeter any type 0 to 300 volts (as per sample) complete all as specified.

Supply & Fix in replacement of for ammeter any type 0 to 30 Amps (as per sample) complete all as specified.

Supply & Fix in replacement of connector block porcelain 4 way suitable for stabilizer upto 5 KVA capacity complete all as specified.

Supply & Fix in replacement for plug top 3 pin, 15 Amps, 230 volts, 50 Hz AC complete all as specified.

Material and labour in replacement Metal Clad Plug & socket board SP&N enclosure with single pole and earth metal plug & socket suitable for 20 Amps MCB AC, 220 V, 50Hz , with MCB SP 20-32 Amps complete all as specified and as directed by Engr-in-Charge. Make- Havells Cat part No- DHDPUSN020/DHDPUDP020 or equivalent in Legrand ABB, Schneider

Supply and fix in replacement of PVC insulated and PVC sheathed, flexible copper conductor cable 3 core, 1100 volts grade, multi stranded type of size 6.0 sqmm complete all as specified.

Material and labour for taking down of desert cooler and Servicing of Desert cooler of any type/ capacity quarterly cleaning of tank, painting with black paint after cleaning including checking of electric circuit for smooth functioning of desert cooler complete all as specified and directed.

Supply and fix in replacement of desert cooler pad complete (in set of three) suitable for cooler of Size as required at site complete all as specified & directed.

Material & labour taking down of desert cooler fan motor and transporting the unserviceable motor to workshop for rewinding of desert cooler fan motor with supper enamelled copper winding wire of same gauge including replacement of insulating material, bushes, bearing and shaft after taking out burnt wire including transportation to civil workshop complete all as specified & directed.

Supply & fix in replacement ON/OFF switch of desert cooler complete all as specified.

Supply & fix in replacement of step type regulator desert cooler regulator complete all as specified.

Supply & fix in replacement of drain pipe PVC flexible, spring type of size 15 mm dia as per site requirement complete all as specified.

M & L for servicing of RO Plant of capacity 50/150 LPH quarterly including replacement of minor spares, Pump repair, refixing the plant after repair, testing complete all as specified and directed of entire satisfactory level by Engr-in charge. Note: Spares required shall be measured and paid under relevant items

Supply only Membrane suitable for 150 LPH RO Plant

Supply only Filter heavy Grade for 150 LPH RO Plant

Supply only Electrical accessories ,Solenoid valve, for 150 LPH RO Plant

Supply only Membrane for 50 LPH RO Plant

Supply only activated carbon Filter heavy Grade for 50 LPH RO Plant

Supply only Electrical accessories Solenoid valve for 50 LPH RO Plant

Supply & fix in replacement HDPE pipe 3/8"dia suitable for inlet & outlet of RO plant all as specified

S & F in replacement of booster pump for 50 LPH RO Plant

S & F in replacement of booster pump for 150 LPH RO Plant

Material and labour for Shifting to new location, window type ACs 1.5 /2.0 TR capacity including wooden frame,ply of required size and shape, removing of connected accessories all as directed by Engr -in- charge

Material and labour for Shifting of Split type Acs 1.5 /2.0 TR capacity to new location including wooden frame,ply of required size removing of indoor unit, out door unit and connected accessories all as directed by Engr -in- charge

Servicing of Ductable type AC 11 Ton capacity complete quarterly with blower motor dismantling all parts and refixing after cleaning and replacement of defective parts, dismantling the cover of condensing coil carefully and carryout servicing, cleaning the external surface (both side) and fan of the unit out side of the equipment like base plate runner fan blade thoroughly with the help of descaling chemical, brush, water and dry properly including using air blower for cleaning air dust deposited on the equipment and re-fixing the same after repair complete all as specified. Note:- Spare parts shall be measured and paid separately.

Supply and fixing in replacement after taking down defective /unserviceable scroll compressor of capacity 11.0 TR ductable AC, refixing new compressor of 11 Ton including brazing work etc, pressure testing & establishing vacuum for dehydration complete all as specified and directed by Engr-in-Charge. of three phase compressor suitable for 11.0 Ton capacity for ductable Type AC. Make: Kirloskar/Emerson/Hitachi/existing make ACs complete all as specified.

Supply & charging the gas refrigerant R-22/R 410 A or as existing to Ductable type AC's of capacity 11 Ton capacity including removing of leakage if any and testing complete all as specified & directed.

Supply and fix in replacement of LP cut-out suitable for ductable type ACs of capacity 11 Ton complete all as specified.

Supply and fix in replacement of HP cut-out suitable for Ductable type ACs of capacity 11 Ton complete all as specified.

Supply and fix in replacement of expansion valve suitable for Ductable type ACs of capacity 11 Ton complete all as specified.

Material and labour for taking down of unserviceable PCB and transporting it to authorized workshop for its repair complete along with necessary accessories like diodes, resistors, capacitors for PCB card suitable for package type AC's of capacity 11 Ton complete all as specified and as directed by Engr-in-Charge.

Material and labour for taking down existing unserviceable fan blade and replacement of new fan blade made out of aluminium/plastic suitable for package type AC's of capacity 11 Ton complete all as specified and as directed by Engr-in-Charge.

Material and labour for taking down existing unserviceable blower and replacement by new evaporating air blower made out of aluminium/plastic suitable for package type AC's of capacity 11 Ton complete all as specified and as directed by Engr-in-Charge..

Material and labour for taking down unserviceable fan motor and supply and fix in replacement new fan motor single/double shaft as per existing model suitable for package type AC's of capacity 11 Ton complete all as specified and as directed by Engr-in-Charge.

Supply and fix in replacement air filter synthetic / nylon type as per existing size and shape suitable for package type AC's of capacity 11 Ton complete all as specified and as directed by Engr-in-Charge..

Supply,fixing and laying of GI Duct fabricated from 24 Gauge GI Sheet with acoustic lining with connected accessories i.e-nut,bolts,fastener,flat iron strip, clamps etc complete all as specified and directed.

S & F of Thermal insulation of ducts comprise of preparation of surfaces and fixing of new cross linked closed cell polythene,plane,fire retardant insulation of 9 mm thick nitrile insulation with aluminium foil of the duct, fire retardant self extinguishing on dripping, good ozone resistance, including fixing the insulation to the duct surface with help of adhesive paste and closing the gap with self adhesive tape of 3mm thick complete all as specified and directed.

Servicing of tower type AC 4.0 Ton capacity quarterly complete with blower motor dismantling all parts and refixing after cleaning and replacement of defective parts, dismantling the cover of condensing coil carefully and carryout servicing, cleaning the external surface (both side) and fan of the unit out side of the equipment like base plate runner fan blade thoroughly with the help of descaling chemical, brush, water and dry properly including using air blower for cleaning air dust deposited on the equipment and re-fixing the same after repair complete all as specified. Note:- Spare parts shall be measured and paid separately.

Supply and fixing in replacement after taking down defective /unserviceable scroll compressor of capacity 4.0 TR tower AC , refixing new compressor of 4.0 Ton including brazing work etc, pressure testing & establishing vacuum for dehydration complete all as specified and directed by Engr-in-Charge. of three phase compressor suitable for 4.0 Ton capacity for ductable Type AC. Make: Kirloskar/Emerson/Hitachi/existing make ACs complete all as specified.

Supply & charging the gas refrigerant R-22/R 410 A or as existing to Tower AC's of capacity 4.0 Ton capacity including removing of leakage if any and testing complete all as specified & directed.

Supply and fix in replacement of LP cut-out suitable for tower type ACs of capacity 4.0 Ton complete all as specified.

Supply and fix in replacement of HP cut-out suitable for Tower type ACs of capacity 4.0 Ton complete all as specified.

Supply and fix in replacement of expansion valve suitable for Tower type ACs of capacity 4.0 Ton complete all as specified.

Material and labour for taking down of unserviceable PCB and transporting it to authorized workshop for its repair complete along with necessary accessories like diodes, resistors, capacitors for PCB card suitable for tower type AC's of capacity 4.0 Ton complete all as specified and as directed by Engr-in-Charge.

Material and labour for opening and taking down existing unserviceable PCB and fixing of new PCB suitable for 4.0 Ton tower AC complete all as specified and directed by Engr-in-Charge.

Material and labour for taking down existing unserviceable fan blade and replacement of new fan blade made out of aluminium/plastic suitable for Tower type AC's of capacity 4.0 Ton complete all as specified and as directed by Engr-in-Charge.

Material and labour for taking down existing unserviceable blower and replacement by new evaporating air blower made out of aluminium/plastic suitable for Tower type AC's of capacity 4.0 Ton complete all as specified and as directed by Engr-in-Charge..

Material and labour for taking down unserviceable fan motor and supply and fix in replacement new fan motor single/double shaft as per existing model suitable for Tower type AC's of capacity 4.0 Ton complete all as specified and as directed by Engr-in-Charge.

Supply and fix in replacement air filter synthetic / nylon type as per existing size and shape suitable for package type AC's of capacity 4.0 Ton complete all as specified and as directed by Engr-in-Charge..

M&L for comprehensive maintenance of Servo Voltage Stabilizer/ Servo Voltage Regulator, 150 KVA, comprising of following jobs complete all as specified and as directed:- (a) Taking out of electric connection of defective voltage stabilizer and transport it to workshop for repair, opening up and taking out coil, core and core assembly for repair including cleaning/washing of tanks and removing the dust from all parts including cores, tanks, cooling tubes, removal of damaged parts making connection and assembling complete in all respects after repair of coils IC's, Regulators, Condensers, Triac, Transistors etc. respective cards nuts and bolts, refilling of transformer oil, transport to site including installation, connecting the electric connection and testing on full load. (b) Preventive maintenance on quarterly basis and upkeep of Report. (c) Contractor shall be attending complaints round the clock i.e. 24 hrs. If contractor is not able to rectify the complaint within 8 hours penalty shall be charged as given below:- (i) upto 1st day- 500 (ii) Subsequently for every days - Rs 1200/day. Note:- (i) The rates quoted by the contractor shall deemed to be inclusive of T&P and minor sundries items etc as required. (ii) Major Spares Part shall be measured and paid for separately under respective item of this Schedule. The parts which are not These shall be identical to those specified by the original manufacturer. (iii) Any items not covered under as supply & Fix/M&L shall be deemed to be included in this section for the smooth functioning of voltage stabiliser and the contractor may quote the rate accordingly. Contractor is expected to inspect the stabiliser before quoting the rate. (iii) The job shall also includes shifting through crane with necessary accessories, transportation from site to work shop and vice- versa.

M&L for repair and rewinding dimmer suitable for 150 KVA voltage stabilizer including taking out old winding complete all as specified and as directed.

M&L for repair and rewinding buck/boost loading transformer complete suitable for 150 KVA voltage stabilizer including taking out old winding complete all as specified and as directed.

S&F in repair cut off circuit with contactor suitable for 150 KVA voltage stabilizer complete all as specified and as directed.

S&F in replacement control wiring of Servo Voltage Stabilizer/ Servo Voltage Regulator, 150 KVA complete all as specified and as directed.

M&L for comprehensive maintenance of Servo Voltage Stabilizer/ Servo Voltage Regulator, 50 KVA, comprising of following jobs complete all as specified and as directed:- (a) Taking out of electric connection of defective voltage stabilizer and transport it to workshop for repair, opening up and taking out coil, core and core assembly for repair including cleaning/washing of tanks and removing the dust from all parts including cores, tanks, cooling tubes, removal of damaged parts making connection and assembling complete in all respects after repair of coils IC's, Regulators, Condensers, Triac, Transistors etc. respective cards nuts and bolts, refilling of transformer oil, transport to site including installation, connecting the electric connection and testing on full load. (b) Preventive maintenance of on quarterly basis and upkeep of Report. (c) Contractor shall be attending complaints round the clock i.e. 24 hrs. If contractor is not able to rectify the complaint within 8 hours penalty shall be charged as given below:- (i) upto 1st day- 500 (ii) Subsequently for every days - Rs 1200/day. Note:- (i) The rates quoted by the contractor shall deemed to be inclusive of T&P and minor sundries items etc as required. (ii) Major Spares Part shall be measured and paid for separately under respective item of this Schedule. The parts which are not These shall be identical to those specified by the original manufacturer. (iii) Any items not covered under as supply & Fix/M&L shall be deemed to be included in this section for the smooth functioning of voltage stabiliser and the contractor may quote the rate accordingly. Contractor is expected to inspect the stabiliser before quoting the rate. (iii) The job shall also includes shifting through crane with necessary accessories, transportation from site to work shop and vice- versa.

M&L for repair and rewinding dimmer suitable for 50 KVA voltage stabilizer including taking out old winding complete all as specified and as directed.

M&L for repair and rewinding buck/boost loading transformer complete suitable for 50 KVA voltage stabilizer including taking out old winding complete all as specified and as directed.

S&F in repair cut off circuit with contactor suitable for 50 KVA voltage stabilizer complete all as specified and as directed.

S&F in replacement Power wiring and copper thimble of Servo Voltage Stabilizer/ Servo Voltage Regulator, 50 KVA complete all as specified and as directed.

S&F in replacement Input/output connection suitable for 50 KVA voltage stabilizer/ Servo Voltage Regulator, 50 KVA complete all as specified and as directed.

M&L for comprehensive maintenance of Servo Voltage Stabilizer/ Servo Voltage Regulator, 10/20 KVA, comprising of following jobs complete all as specified and as directed:- (a) Taking out of electric connection of defective voltage stabilizer and transport it to workshop for repair, opening up and taking out coil, core and core assembly for repair including cleaning/washing of tanks and removing the dust from all parts including cores, tanks, cooling tubes, removal of damaged parts making connection and assembling complete in all respects after repair of coils IC's, Regulators, Condensers, Triac, Transistors etc. respective cards nuts and bolts, refilling of transformer oil, transport to site including installation, connecting the electric connection and testing on full load. (b) Preventive maintenance of on quarterly basis and upkeep of Report. (c) Contractor shall be attending complaints round the clock i.e. 24 hrs. If contractor is not able to rectify the complaint within 8 hours penalty shall be charged as given below:- (i) upto 1st day- 500 (ii) Subsequently for every days - Rs 1200/day. Note:- (i) The rates quoted by the contractor shall deemed to be inclusive of T&P and minor sundries items etc as required. (ii) Major Spares Part shall be measured and paid for separately under respective item of this Schedule. The parts which are not These shall be identical to those specified by the original manufacturer. (iii) Any items not covered under as supply & Fix/M&L shall be deemed to be included in this section for the smooth functioning of voltage stabiliser and the contractor may quote the rate accordingly. Contractor is expected to inspect the stabiliser before quoting the rate. (iii) The job shall also includes shifting through crane with necessary accessories, transportation from site to work shop and vice- versa.

M&L for repair and rewinding dimmer suitable for 10/20 KVA voltage stabilizer including taking out old winding complete all as specified and as directed.

M&L for repair and rewinding buck/boost loading transformer complete suitable for 10/20 KVA voltage stabilizer including taking out old winding complete all as specified and as directed.

S&F in repair cut off circuit with contactor suitable for 10/20 KVA voltage stabilizer complete all as specified and as directed.

S&F in replacement control wiring of Servo Voltage Stabilizer/ Servo Voltage Regulator, 10/20 KVA complete all as specified and as directed.

S&F in replacement Power wiring and copper thimble of Servo Voltage Stabilizer/ Servo Voltage Regulator, 10/20 KVA complete all as specified and as directed.

S&F in replacement electronic control card, suitable for 10 KVA to 150 KVA Servo Voltage Stabilizer/ Servo Voltage Regulator complete all as specified and as directed.

S&F in replacement Amp meter (Digital), suitable for 10 KVA to 150 KVA Servo Voltage Stabilizer/ Servo Voltage Regulator complete all as specified and as directed.

S&F in replacement Volt meter (Digital), suitable for 10 KVA to 150 KVA Servo Voltage Stabilizer/ Servo Voltage Regulator complete all as specified and as directed.

S&F in replacement Synchronous motor 10kg torque, suitable for 10 KVA to 150 KVA Servo Voltage Stabilizer/ Servo Voltage Regulator complete all as specified and as directed.

S&F in replacement RC network, suitable for 10 KVA to 150 KVA Servo Voltage Stabilizer/ Servo Voltage Regulator complete all as specified and as directed.

S&F in replacement DPDT switch, suitable for 10 KVA to 150 KVA Servo Voltage Stabilizer/ Servo Voltage Regulator complete all as specified and as directed.

S&F in replacement sensing transformer, (16V/1Amp, 12V/1 Amp), suitable for 10 KVA to 150 KVA Servo Voltage Stabilizer/ Servo Voltage Regulator complete all as specified and as directed.

S&F in replacement 12 pin connector (PCB), suitable for 10 KVA to 150 KVA Servo Voltage Stabilizer/ Servo Voltage Regulator complete all as specified and as directed.

S&F in replacement micro switch, 5 Amp, suitable for 10 KVA to 150 KVA Servo Voltage Stabilizer/ Servo Voltage Regulator complete all as specified and as directed.

S&F in replacement liver Nylon/Metal, suitable for 10 KVA to 150 KVA Servo Voltage Stabilizer/ Servo Voltage Regulator complete all as specified and as directed.

S&F in replacement gear assembly suitable size, suitable for 10 KVA to 150 KVA Servo Voltage Stabilizer/ Servo Voltage Regulator complete all as specified and as directed.

S&F in replacement potentiometer, suitable for 10 KVA to 150 KVA Servo Voltage Stabilizer/ Servo Voltage Regulator complete all as specified and as directed.

SNOWY ENGINEERING INC

RUCHIKA ENGG.WORKS