Construction of New Court Building at Hangarga(Tul) Tq.Tuljapur District.Osmanabad

Amount

PART – A (Work Portion)

(i) Civil Work

ITEM No. 1 :- Labour charges for removing grass, thorney shrubs, Jungli shrub, Kubabul and alike grass along roadside making the ground clean by showel and phavaras etcetera complete.

ITEM No. 2 :- Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material with all lifts and leads beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etcetera complete. (Lift upto 1.5 metre)

ITEM No. 3 :- Excavation for foundation in hard murum including removing the excavated material with all lifts and leads beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etcetera complete. (Lift upto 1.50 metre)

ITEM No. 4 :- Excavation for foundation in hard murum and boulders including removing the excavated material with all lifts and leads beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etcetera complete. (Lift upto 1.5 metre)

ITEM No. 5 :- Excavation for foundation in Hard murum and boulders including removing the excavated material with all lifts and leads, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etcetera complete. (Lift from 1.5 metre to 3.00 metre)

ITEM No. 6 :- Conveying materials obtained from road cutting including all lifts, laying in layers of 20 centimetre to 30 centimetre breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard proctor density for a lead of 300 metre to 500 metre inclusive, from the site of excavation to the site of deposition as directed.

ITEM No. 7 :- Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper. (Material including all lead and lifts)

ITEM No. 8 :- Providing and laying Cast in situ / Ready Mix cement concrete in M-15 of trap/ granite / quartzite / gneiss metal for foundation and bedding / steps including steel centering, formwork, laying / pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etcetera complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etcetera (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.). (Material including all lead and lifts)

ITEM No. 9 :- Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite / quartzite / gneiss metal for reinforced cement concrete work in foundations like raft, strip foundations, grillage and footings of reinforced cement concrete columns and steel stanchions etcetera including bailing out water, formwork, cover blocks, laying / pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etcetera complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.). (Material including all lead and lifts)

ITEM No. 10 :- Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete columns as per detailed designs and drawings or as directed including centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etcetera complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.). (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

ITEM No. 11 :- Providing and laying Cast in situ / Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying / pumping, compaction and roughening the surface if special finish is to be provided and curing etcetera complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.). (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

ITEM No. 12 :- Providing and laying Cast in situ / Ready Mix cement concrete M-25 of trap/ granite / quartzite / gneiss metal for reinforced cement concrete slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etcetera complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.). (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

ITEM No. 13 :- Providing and laying Cast in situ / Ready Mixcement concrete M-25 of trap/ granite/ quartzite / gneiss metal for reinforced cement concrete chajja as per detailed design and drawings including centering, formwork, cover blocks, laying / pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.). (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

ITEM No. 14 :- Providing and laying Cast in situ / Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete pardi of required thickness including centering, formwork, cover blocks, laying / pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.). (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

ITEM No. 15 :- Providing and laying Cast in situ / Ready Mix cement concrete in M-25 of trap / quartzite / granite / gneiss metal for reinforced cement concrete Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying / pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etcetera complete. (Excluding reinforcement, including cover block). (Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etcetera) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.). (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

ITEM No. 16 :- Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for reinforced cement concrete pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etcetera as per detailed designs, drawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

ITEM No. 17 :- Providing expansion joints in reinforced cement concrete framed structure (interior columns) with plain premoulded filler with confirming to IS 1838,1961, 25 millimetre thick with 75 millimetre wide and 1 millimetre thick stainless steel plate finishing etcetera complete as directed

A) Ground Floor

B) First Floor

C) Second Floor

ITEM No. 18 :- Providing expansion joints in reinforced cement concrete framed structure (exterior column) with plain premoulded filler 25 millimetre thick with 75 millimetre wide and 1 millimetre thick stainless steel plate and finishing etcetera complete. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

ITEM No. 19 :- Providing expansion joints in reinforced cement concrete framed structure (at floor level) with plain premoulded filler 25 millimetre thick with 75 millimetre wide and 1 millimetre thick stainless steel plat and finishing etcetera complete. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

ITEM No. 20 :- Providing expansion joints in reinforced cement concrete framed structure (at Terrace level) with premoulded filler 25 millimetre thick with 40 millimetre wide and 1 millimetre thick stainless steel plate as required, bitumen poured filler and finishing etcetera complete as directed. (Material including all lead and lifts) (Second Floor)

ITEM No. 21 :- Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etcetera complete. (Material including all lead and lifts)

ITEM No. 22 :- Filling in plinth and floors with approved excavated material in 15 centimetre to 20 centimetre layers including watering and compacting etcetera complete. (Material including all lead and lifts)

ITEM No. 23 :- Filling in plinth and floors with contractors material / brought from outside and approved by Engineer in charge in layers of 15 centimetre to 20 centimetre including watering and compaction etcetera complete. (Material including all lead and lifts)

ITEM No. 24 :- Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper. (Material including all lead and lifts)

ITEM No. 25 :- Providing soling using 80 millimetre size trap metal in 15 centimetre layer including filling voids with Crushed sand /grit, ramming, watering etcetera complete. (Material including all lead and lifts)

ITEM No. 26 :- Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying / pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.) (Material including all lead and lifts)

ITEM No. 27 :- Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etcetera complete. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

ITEM No. 28 :- Providing Second class fly ash brick masonry with conventional / I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6 millimetre diameter / two hoop iron strips 25 millimetre X 1.60 millimetre at every third course, properly bent and bounded at ends scaffolding raking out joints and watering etcetera complete. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

ITEM No. 29 :- Providing and laying Cast in situ / Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including centering, formwork, cover blocks, laying/pumping, compacting, curing, finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforc-ement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.). (Material including all lead and lifts)

A) First Floor

B) Second Floor

ITEM No. 30 :- Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300 millimetre X 40 millimetre X 5 millimetre with oil painting, etcetera complete. (Material including all lead and lifts)

ITEM No. 31 :- Providing and fixing chicken mesh of 22 gauge, with about 30 centimetre width at the junction of reinforced cement concrete members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete or burnt brick masonry and or tying by binding wire etcetera complete. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

ITEM No. 32 :- Providing and applying two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etcetera complete. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

ITEM No. 33 :- Providing internal cement plaster 12 millimetre thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etcetera complete. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

ITEM No. 34 :- Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etcetera complete. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

ITEM No. 35 :- Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 millimetre thick in cement mortar 1:4 using waterproofing compound at 1 kilogram per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 millimetre thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etcetera complete. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

ITEM No. 36 :- Providing and applying Texture plaster with finishing with Purli / Rustic texture material (with texture material of Asian / Renava / Nitco/Temtex or equivalent company make) in 3 to 4 millimeter thickness on previously finished plastered surface, including Plaster Groove 6millimetre thickness or Tape Grooves 35 to 45 millimetre thickness or as required, in all position including preparing the surface scaffolding etcetera complete. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

ITEM No. 37 :- Labour charges for providing groove in external plaster having width and spaced as directed by Engineer in charge etcetera complete.

A) Ground Floor

B) First Floor

C) Second Floor

ITEM No. 38 :- Providing patti/ band 100 millimetre wide on plastered surface 12 millimetre to 15 millimetre thick in C.M. 1:3 line and level including neat finishing scaffolding curing etcetera complete.

A) Ground Floor

B) Second Floor

ITEM No. 39 :- Providing internal cement plaster 20 millimetre thick in two coats in cement mortar 1:3 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etcetera complete. (Material including all lead and lifts)

ITEM No. 40 :- Providing fine cement finish 1.5 millimetre thick over green plaster surface including scaffolding curing etcetera complete. (Material including all lead and lifts)

ITEM No. 41 :- Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in cement mortar 1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with cement mortar 1:3 admixed with approved water proofing compound and finally top finishing with average 20 millimetre thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound marking finished surface with false squares of 300 millimetre X 300 millimetre making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leak-proofness on Court fee stamp paper of Rs. 500/- including ponding test etcetera complete.

A) First Floor

B) Second Floor

ITEM No. 42 :- Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12 millimetre bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound at the rate of 1 kilogram for per bag of cement laying brick bat coba of required thickness in cement mortar 1:5 with waterproofing compound 1 kilogram per bag of cement grouting and finishing the top layer with 20 millimetre thick brick bedding in cement mortar 1:3 with waterproofing compound 1 kilogram per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years guarantee on requisite stamp paper including curing etcetera complete. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

ITEM No. 43 :- Providing and laying vitrified matt finish tiles having size 590 millimetre to 605 millimetre X to 605 millimetre of 8 to 10 millimetre thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etcetera complete. a) Flooring (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

ITEM No. 44 :- Providing and laying vitrified matt finish tiles having size 590 millimetre to 605 millimetre X to 605 millimetre of 8 to 10 millimetre thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etcetera complete. b) Skirting (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

ITEM No. 45 :- Providing and fixing machine cut machine polished 18 millimetre to 20 millimetre thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etcetera complete. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

ITEM No. 46 :- Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 millimetre thick for door frame/ dado/ window boxing etcetera on cement mortar 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etcetera complete. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

ITEM No. 47 :- Providing and laying ceramic tiles having size 30 centimetre X 45 centimetre confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etcetera complete. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

ITEM No. 48 :- Providing and laying Antiskid Ceramic tiles of approved quality of size 30 centimetre x 30 centimetre and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etcetera complete. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

ITEM No. 49 :- Providing 25 millimetre to 30 millimetre thick partition of polished black kadappa stone slab of approved quality including giving required size and shape etcetera fixing in cement mortar 1:3 curing and cement etcetera complete. a) One side polish

ITEM No. 50 :- Providing 25 millimetre to 30 millimetre thick partition of polished black kadappa stone slab of approved quality including giving required size and shape etcetera fixing in cement mortar 1:3 curing and cement etcetera complete. b) Both side polish (Material including all lead and lifts)

ITEM No. 51 :- Providing and laying in situ cement concrete M-30 with tremix treatment for 200 millimetre thickness for Concrete Road is including laying plastic sheet for 125 micron thickness with groove cutting of 4 millimetre wide and 20 millimetre deep with necessary refilling with bitumen (excluding reinforcement) with Natural sand etcetera complete

ITEM No. 52 :- Providing and fixing Country teak wood Four leaf paneled shutters, 35 millimetre thick style and rail and 25 millimetre thick panels without ventilator as per detailed drawing excluding the door frame, stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats complete. (Material including all lead and lifts)

ITEM No. 53 :- Providing and fixing 34 millimetre thick moulded door shutter consisting of solid core single leaf flush door of 30 millimetre thickness lipped with 15 millimetre ( 5 millimetre X 3 ) thick X 30 millimetre width on one style and top rail and 10 millimetre (5 millimetre X 2 ) thick X 30 millimetre width on other style and bottom rails. The inner panels laminated with 2 millimetre thick termite proof, water proof and fire resistant moulded PVC sheet with 2,4,6 design in different plain and /or prelim colours on one side after routing the moulded design on flush doors and 2 millimetre plain and /or pre lam PVC on other side using rubber adhesive on flush door and solvent cement adhesive on the PVC lipping etcetera as per direction of Engineer in charge and manufacturers specification and drawing etcetera complete. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

ITEM No. 54 :- Providing and Fixing 30 MILLIMETRE thick BOTH SIDE PRELAMINATED SOLID PANEL PVC DOOR SHUTTER consisting of frame made out of M.S. tubes of 19 guage thickness and, size 19 X 19 millimetre for styles and 15 X 15 millimetre for the top and bottom rails, M.S. frame shall have a coat of metel primer of approved make and manufacture. M.S frame shall be covered with heat mouled PVC 'C' channel made from 5 millimetre (+/0.25) thick prelaminated sheet of density 600 kg/cbm, of size 30 millimetre thickness 70 millimetre width out of which 50 millimetre shall be flat and 20 millimetre shall be tapered in 45 angle on either side forming stiles ? and 5 millimetre thick, 95 millimetre wide PVC sheet out of which 75 millimetre shall be falt and 20 millimetre shall be tapered in 45 on the inner side to form top and bottom rail and 115 millimetre wide PVC sheet out of which 75 millimetre shall be falt and 20 millimetre shall be tapered on both sides to form lock rail. Top, bottom and lock rail shall be provided either side of the panel. An additional 5 millimetre (+/0.25) thick PVC strip of 20 millimetre width is to be stuck on the bottom side of the ' c ' channel prelaminated paneling of 5 millimetre (+/0.25) thick PVC sheet to be fitted inside the Mild Steel frame welded/ sealed to the styles and rails with 5 millimetre (+/0.25) x 30 millimetre PVC sheet beading on either side and joined together with solvent cement adhesive etcetera, 10 millimetre thickness (5 millimetre (+/0.25) X 2 numbers ) 20 millimetre wide cross PVC sheet as gap insert for the rail and bottom rail. Door to be fixed to frames with 3 numbers M.S. powder coated but hinges of size 100 millimetre X 25 Millimetre X 2 millimetre using 32 millimetre long steel screws drilled suitable to pass through both the walls of the M.S. tube, other hardwares should be fixed with 19 X 6 millimetre size steel screws including fixture fasting, complete as per direction of engineer in charge. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

ITEM No. 55 :- Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 X 38.10 X 0.90 millimetre at weight 0.637 kilogram per running metre with window frame bottom track section 92 X 31.75 X 1.30 millimetre at weight 1.070 kilogram per running metre top and side track section 92 X 31.75 X 1.30 millimetre at weight 0.933 kilogram per running metre The shutter should be of bearing bottom 40 X 18 X 1.25 millimetre at weight 0.417 kilogram per running metre Inter locking section 40 X 18 X 1.10 millimetre at weight 0.469 kilogram per running metre and handle and top section 40 x 18 x 1.25 millimetre at weight 0.417 kilogram per running metre as per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 millimetre thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etcetera, complete, with powder coating without box.

A) Second Floor

B) First Floor

C) Second Floor

ITEM No. 56 :- Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 X 38 millimetre X 1.22 millimetre box type, 5 millimetre thick sheet glass louvers, of approved quality etcetera complete. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

ITEM No. 57 :- Providing and fixing mild steel grill work for windows, ventilators etcetera 20 kilogram per square metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

ITEM No. 58 :- Providing and Fixing mat finish stainless steel (of 302 grade ) railing with top pipe of 50 millimetre diameter and vertical pipe of 38 millimetre diametre at 0.60 metre centre to centre or as required and horizontal pipes of 25 millimetre diametre in three rows, all pipes of 2 millimetre thick including buffing, fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 millimetre diameter above newel post of 75 millimetre diameter etcetera complete (Prior approval of sample and brand by Executive Engineer is necessary before use) (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

ITEM No. 59 :- Providing and fixing Godrej make door for strong room Class II defender with grill, gate with necessary filling as per standard complete. (Second Floor)

ITEM No. 60 :- Providing and fixing on walls/ ceiling/ floor 15 millimetre diameter CPVC pipe with necessary fittings, remaking good the demolished portion etcetera complete including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete. (Material including all lead and lifts)

ITEM No. 61 :- Providing and fixing on walls / ceiling / floor 25 millimetre diameter CPVC pipe with necessary fittings, remaking good the demolished portion etcetera complete, including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete. (Material including all lead and lifts)

ITEM No. 62 :- Providing and fixing on walls /ceiling/ floor 40 millimetre diameter CPVC pipe with necessary fittings, remaking good the demolished portion etcetera complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete. (Material including all lead and lifts)

ITEM No. 63 :- Providing and laying in trenches 50 millimetre daimetre CPVC pipe including necessary excavation, fittings. Refilling trenches etcetera complete, including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete. (Material including all lead and lifts)

ITEM No. 64 :- Providing and fixing screw down for 50 millimetre diameter wheeled stop tap of brass including necessary sockets/ union nut complete. (Material including all lead and lifts)

ITEM No. 65 :- Providing and fixing screw down for 40 millimetre diameter wheeled stop tap of brass including necessary sockets/union nut complete. (Material including all lead and lifts)

ITEM No. 66 :- Providing and fixing screw down for 25 millimetre diameter wheeled stop tap of brass including necessary sockets/union nut complete. (Material including all lead and lifts)

ITEM No. 67 :- Providing and fixing orissa type colour glazed earthenware 625 x 450 millimetre water closet pan including trap, Cast Iron soil and vent pipe upto the out side face of wall including 100 millimetre diameter Cast Iron plug, bend, 15 millimetre thick 10 litre PVC flushing cistern with all necessary pipe connection etcetera complete.

A) Ground Floor

B) First Floor

C) Second Floor

ITEM No. 68 :- Providing and fixing European type white glazed earthenware coupled closet symphonic trap with symphonic low level white glazed 10 litres cistern with black backlite seat with all necessary pipe connection etcetera complete.

A) Ground Floor

B) First Floor

C) Second Floor

ITEM No. 69 :- Providing and fixing white glazed earthenware Wash Hand Basin of 55 centimetre x 40 centimetre size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etcetera complete.

A) Ground Floor

B) First Floor

C) Second Floor

ITEM No. 70 :- Providing and fixing White Glazed Earthenware full stall type Urinal with P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32 millimetre diameter P.V.C flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe connection upto the outside face of the wall.

A) Ground Floor

B) First Floor

C) Second Floor

ITEM No. 71 :- Providing and fixing stainless steel sink of size 600 x 510 x 200 millimetre including coupling, outlet pipe, elbow and other necessary fitting, finishing etcetera complete. (Material including all lead and lifts)

ITEM No. 72 :- Providing and fixing C.P.Two way BIB cock of approved make including necessary sockets / union nut etcetera complete.

A) Ground Floor

B) First Floor

C) Second Floor

ITEM No. 73 :- Providing and fixing C.P. BIB cock with wall flange of approved make including necessary sockets / union nut etcetera complete.

A) Ground Floor

B) First Floor

C) Second Floor

ITEM No. 74 :- Providing and fixing C.P. wall mixer with provision for overhead shower with 115 millimetre long bend pipe and wall flange of approved make make including necessary sockets / union nut etcetera complete.

A) Ground Floor

B) First Floor

C) Second Floor

ITEM No. 75 :- Providing and fixing C. P. sink cock with raised J shaped swinging casted spout of approved make including necessary sockets/ union nut etcetera complete. (Material including all lead and lifts)

ITEM No. 76 :- Providing and fixing 450 millimetre X 550 millimetre size superior type Belgium mirror with 16 millimetre diameter nickel plated towel rod etcetera complete. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

ITEM No. 77 :- Providing and laying concrete pipes of I.S. NP class of 300 millimetre diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. (Material including all lead and lifts)

ITEM No. 78 :- Providing and constructing Brick Masonry Inspection Chamber 60 centimetre x 45 centimetre x 90 centimetre including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with reinforced cement concrete Cover medium duty 140 kilogram with frame etcetera complete. (Material including all lead and lifts)

ITEM No. 79 :- Providing and constructing Brick Masonry Inspection Chamber 90 centimetre x 45 centimetre x 90 centimetre including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with reinforced cement concrete Cover medium duty 140 kilogram with frame etcetera complete. (Material including all lead and lifts)

ITEM No. 80 :- Providing and fixing 100 millimetre diametre stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etcetera complete. (Material including all lead and lifts)

ITEM No. 81 :- Providing and fixing H.D.P. container Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres. (Material including all lead and lifts) (Second Floor)

ITEM No. 82 :- Providing and fixing 10 centimetre PVC nahani trap with grating etcetera complete. (Material including all lead and lifts)

ITEM No. 84 :- Providing and fixing in position UPVC ultra violet stabilized 110 millimetre outer diameter cowl dome confirming to I.S.-4985 including making joints with solvent cement etcetera complete. (Material including all lead and lifts)

ITEM No. 85 :- Providing soak pit of size 120 centimetre x 120 centimetre x 120 centimetre including excavating and filling with brick-bats. (Material including all lead and lifts)

ITEM No. 86 :- Providing and fixing false ceiling with eco-friendly light-weight calcium silicate tiles of spintone surface texture aerolite make or equivalent of size 595 millimetre X 595 millimetre having 15 millimetre thick densified micro look edge and 100% humidity resistance in combustible as per BS 46 part IV and thermal conductivity 0.043 w/m 0 KC and NRC 0.50 placed in true horizontal level suspended grid of size 600 X 600 millimetre made from hot dipped G.I. steel sections ion silhouette profile, rotary stitched double webbed white with 6 millimetre reveal profile (white / black), wherein, main T runner of size 42 millimetre X 14 millimetre between main tee 600 millimetre center to center and secondary cross T of size 33 X 14 X 0.43 millimetre thick of length 600 millimetre long spaced inter-locked at middle of the first crossed T in each panel to form grid of 1200 millimetre X 600 millimetre resting on periphery wall Profile wall section 19 millimetre (7+7) x 19 millimeter X 0.40 thicknesses and laying false ceiling for services like diffusers grills including cutting, making opening for light fittings, fixtures, smoke detectors etcetera, wherever required. Main T runners suspended from ceiling with using G.I. soffit cleats of size 25 X 35 X 1.6 millimetre of required length fixed to the ceiling with 6 millimetre diametre and 50 millimetre long dash fastener, 4 millimetre diametre G.I. adjustable rods with powder-coated / good quality G.I. level adjustment clips of 35 X 35 X 0.8 millimetre spaced at the rate of 1200, center-to-center along main T all complete at all heights as per the specifications, drawings and as per the directions of Engineer-in-charge.

A) Ground Floor

B) First Floor

C) Second Floor

ITEM No. 87 :- Providing and applying impression 24 carrat Luxury paint of approved make and approved brand Emulsion paint to interior walls and ceilings of approved quality, colour and shade to new surface in two coats, including sub surface preparation by Acrylic putty and Acrylic primer coats including scaffolding, preparing the surface etcetera complete (Low VOC). (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

ITEM No. 88 :- Providing and applying antipeel paint of approved make and approved brand exterior Emulsion paint of approved quality, colour and shade to old and new surface in two coats, including exterior acrylic primer coat, scaffolding, preparing the surface etcetera complete (Heat Reflective Paint). (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

ITEM No. 89 :- Providing and fixing 90 centimetre x 60 centimetre Granite plate engraving 10 centimetre height letter, figures including painting the letters / figures with approved colour and shade complete. (Material including all lead and lifts)

ITEM No. 91 :- Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material with all lifts and leads beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth / murum, ramming, watering including shoring and strutting etcetera complete. (Lift from 1.5 metre to 3.0 metre)

ITEM No. 92 :- Providing and fixing M-40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 6524:1983 having 6 millimetre diametre bars 3 Numbers and strips @ 250 millimetre centre to centre and fixing in wall with 6 Numbers of hold fast of 12 millimetre diametres bars 500 millimetre long including primer and oil painting etcetera complete) frame size 60 millimetre X 125 millimetre. (Material including all lead and lifts) (Second Floor)

ITEM No. 93 :- Providing and laying matt ceramic tiles of having size 30 centimetre x 30 centimetre confirming to I.S.15622/2006 (group D II-A) and 7 to 8 millimetre thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etcetera complete.

ITEM No. 94 :- Providing and laying ceramic tiles of having size 30 centimetre x 30 centimetre and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etcetera complete.

ITEM No. 95 :- Providing and laying polished hand cut Kotah Stone flooring 25millimetre to 30millimetre thick and 45 centimetre to 55 centimetre wide in plain/diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning complete. (Material including all lead and lifts)

ITEM No. 96 :- Providing and applying priming coat on concrete/ masonary / Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etcetera complete. (Material including all lead and lifts)

ITEM No. 97 :- Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etcetera complete.

ITEM No. 98 :- Providing and applying three coats of water proof cement paint of approved manufacture and of approved colour to new plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etcetera complete.

ITEM No. 99 :- Providing and fixing reinforced cement concrete cover of size 60 centimetre x 45 centimetre with frame over inspection chamber etcetera complete. Medium duty (100 Kilogram)

ITEM No. 100 :- Boring / drilling bore well of 300 millimetre diametre for casing / strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire and running charges of all equipments, tools, plants and machinery required for the job, all complete as per direction of Engineer in charge, upto 90 metre depth below ground level. (Material including all lead and lifts)

ITEM No. 101 :- Supplying, assembling, lowering and fixing in vertical position in bore well, UPVC medium well-casing pipe with outer diametre of 165.4 millimetre diametre, conforming to IS : 12818, including required hire and labour charges, fittings and accessories etcetera all complete, for all depths, as per the direction of Engineer in charge. (Material including all lead and lifts)

ITEM No. 102 :- Providing and supplying in standard lengths H. D. Polyethelene Pipes, confirming to IS-4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i.e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler / specials, including all local and central taxes, octrai, inspection charges etcetera complete.

ITEM No. 103 :- Lowering, laying, jointing in standard lengths Polythelene pipes ( 6 Kg / Sq cm – 63 millimetre diametre ) including all labour cost, transportation etcetera complete.

TOTAL : (i) Civil Work

(ii) Electrical Work

Internal Electrification, LAN / TEL wiring

ITEM No. 104 :- Supplying, erecting and terminating FR XLPE insulated, galvanised 6 steel formed wire armoured (strip) cable 1100 V, 3½core 240 sq. mm. aluminium conductor complete erected with glands and lugs, on wall / trusses / pole or laid in provided trench / pipe as per specification.

ITEM No. 105 :- Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etcetera including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete. ( Double door panel with 2 millimetre CRCA sheet and partition outdoor type of size 1.5m x 1.2 m x 0.3 m = 9.09 sq. mtr @ 16 kg / sq. mtr = 145.44 kg

ITEM No. 106 :- Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etcetera for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. (50 X 50 X 5 millimetre angle @4.5 kg / mtr x (7.6 x 3 nos)=102.4 kg)

ITEM No. 107 :- Supplying and erecting of any size electrolyte aluminium patti or bar in bus bar chamber / in panel or any other purpose, 500 V with require capacity 99.9% aluminium purity with E91E Grade as per IS 5082 and Current Density 0.8 A per sq. mm. with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefin insulation sleeve complete as per specification

ITEM No. 108 :- Supplying and erecting porcelain / epoxy bus bar support complete erected in provided M.S. box for 400A

ITEM No. 109 :- Supplying and erecting porcelain / epoxy bus bar support complete erected in provided M.S. box for 200 / 300A

ITEM No. 110 :- Supplying and erecting terminal spreaders suitable for 3 pole, up to 250A MCCB (set of 6)

ITEM No. 111 :- Supplying and erecting terminal spreaders suitable for 3 pole, 300A- 400A MCCB(set of 6)

ITEM No. 112 :- Supplying and erecting extended rotary handle for MCCB with adjustable telescopic rod suitable for up to 250A MCCB.

ITEM No. 113 :- Supplying and erecting extended rotary handle for MCCB with adjustable telescopic rod suitable for above 250A up to 630A MCCB.

ITEM No. 114 :- Providing and erecting 4 Pole MCCB 415V, 400A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt / UV / trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure / panel as per specification

ITEM No. 115 :- Providing and erecting 3 Pole MCCB 415V, 250A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu) adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt / UV / trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure / panel as per specification

ITEM No. 116 :- Supplying and laying (including excavation) reinforced cement concrete pipe of IS 458:2003 NP-2 class of 150 millimetre internal diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etcetera complete.

ITEM No. 117 :- Providing and making second class Burnt Brick masonry with conventional / I.S. type bricks in cement mortar 1:6 in foundation sand plinth of inner walls / in plinth external walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering etcetera Complete. (for one chamber 0.6 cu.mtr x8=4.8cu mtr say 5 cu. mtr)

ITEM No. 118 :- Providing and fixing reinforced cement concrete cover of size 60 centimetre x 45 centimetre with frame over inspection chamber etcetera complete of medium duty (100 Kilogram).

ITEM No. 119 :- Providing and erecting 4 Pole MCCB, 415 V, 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt / UV / trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure / panel as per specification.

ITEM No. 120 :- Providing and erecting floor / wall mounting, MCCB panel board, with door, suitable for four pole incoming 250A, 4 ways four pole outgoing, up to 100 A MCCBs on iron frame, as per specification. (Excluding MCCBs)

ITEM No. 121 :- Providing and erecting floor / wall mounting, MCCB panel board, with door, suitable for four pole incoming 250A, 6 ways four pole outgoing, up to 100 A MCCBs on iron frame, as per specification. (Excluding MCCBs)

ITEM No. 122 :- Providing and erecting incoming and outgoing cable alleys suitable for MCCB panel board with door, 250A incoming and 6 way outgoing or 400A incoming and 4 way outgoing made from CRCA sheet 1.6 millimetre thick duly powder coated and having vertical insulated partition for shielding between the shared face of cableway and DB.

ITEM No. 123 :- Providing and erecting incoming and outgoing cable alleys suitable for MCCB panel board with door, 250A incoming and 4 way outgoing or 400A incoming and 2 way outgoing made from CRCA sheet 1.6 millimetre thick duly powder coated and having vertical insulated partition for shielding between the shared face of cableway and DB.

ITEM No. 124 :- Providing and erecting prewired meter module suitable for MCCB panel board with CTs and emfs VIF meter.

ITEM No. 125 :- Supplying, erecting and terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 120 sq. mm. aluminium conductor complete erected with glands and lugs, on wall / trusses / pole or laid in provided trench / pipe as per specification.

ITEM No. 126 :- Supplying, erecting and terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 95 sq. mm. aluminium conductor complete erected with glands and lugs, on wall / trusses / pole or laid in provided trench / pipe as per specification.

ITEM No. 127 :- Supplying and erecting four pole ON LOAD change over switch, 415V, 200A, open execution having staggered termination, phase barrier, shroud termination and terminal cover along with auxiliary contacts and ready to upgrade with fuse protection kit, operational current category AC23A complying to IS / IEC 60947-3 Part-1 / 3.

ITEM No. 128 :- Supplying and laying (including excavation of suitable width and depth up to 90 cm) 90 millimetre outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground / road surface, to required depth complete.

ITEM No. 129 :- Supplying and laying (including excavation of suitable width and depth up to 90 cm) 120 millimetre outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground / road surface, to required depth complete.

ITEM No. 130 :- Supplying and erecting G.I. pipe ‘A’ class 50 millimetre diametre erected for enclosing XLPE armoured cable on wall / pole as per specification.

ITEM No. 131 :- Supplying and erecting G.I. pipe ‘A’ class 75 millimetre diametre erected for enclosing XLPE armoured cable on wall / pole as per specification.

ITEM No. 132 :- Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 centimetre complete with all materials, testing and recording the results as per specification.

ITEM No. 133 :- Supplying and erecting copper strip of high purity required size used for earthing on wall and / or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint with joints required. As per specification. (25 X 3 millimetre strip @ 0.67 kilogram per metre, 30 metre x 0.67 =20.1 kg)

ITEM No. 134 :- Supplying and erecting GI strip of high purity required size used for earthing on wall and / or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP. (25x3 millimetre strip @ 0.8 kilogram per metre, 150 metre x 0.8 = 120 kilogram)

ITEM No. 135 :- Supplying, erecting and terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 35 sq. mm. aluminium conductor complete erected with glands and lugs, on wall / trusses / pole or laid in provided trench / pipe as per specification.

ITEM No. 136 :- Supplying, erecting and terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 2 core 4 sq mm copper conductor complete erected with glands and lugs, on wall / trusses / pole or laid in provided trench / pipe as per specification.

ITEM No. 137 :- Supplying, erecting and terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 35 sq. mm. copper conductor complete erected with glands and lugs, on wall / trusses / pole or laid in provided trench / pipe as per specification.

ITEM No. 138 :- Supplying, erecting and terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. copper conductor complete erected with glands and lugs, on wall / trusses / pole or laid in provided trench / pipe as per specification.

ITEM No. 139 :- Supplying and erecting triple pole and neutral distribution board (TPNDB), 3 pole / 4 pole MCCB as incomer and outgoing SP MCB (12 poles) or TP MCB of 4 ways (12 poles), with door, 1.2 millimetre thickness, surface / flush mounted, on iron / GI frame (vertical busbar type) as per specification.

ITEM No. 140 :- Providing and erecting 3 Pole MCCB, 415 V, 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt / UV / trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure / panel as per specification.

ITEM No. 141 :- Supplying, erecting and marking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

ITEM No. 142 :- Supplying, erecting and marking SPMCB 40A to 63A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

ITEM No. 143 :- Supplying and erecting mains with 4 x 6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places. as per specification.

ITEM No. 144 :- Supplying and erecting mains with 1x6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places. as per specification.

ITEM No. 145 :- Supplying and erecting mains with 4x10 sq.mm FRLSH copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places as per specification.

ITEM No. 146 :- Supplying and erecting mains with 2x10 sq.mm FRLSH copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places as per specification.

ITEM No. 147 :- Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 10 ways (10 poles) for outgoing SP MCBs, with door, 1.2 millimetre thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification.

ITEM No. 148 :- Supplying and erecting triple pole and neutral distribution board (TPNDB), SPMCB of 4 ways / phase (12 poles), with door, 1.2 millimetre thickness, surface / flush mounted, IP 43 protection on iron / GI frame (horizontal bus bar type) as per specification.

ITEM No. 149 :- Supplying, erecting and marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

ITEM No. 150 :- Supplying, erecting and marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

ITEM No. 151 :- Supplying, erecting and commissioning 2 pole RCCB 40A, electromagnetic type with 30 / 100 / 300 mA sensitivity with earth leakage trip indication complete as per specification.

ITEM No. 152 :- Supplying, erecting and commissioning 4 pole RCCB 63A, electromagnetic type with 30 / 100 / 300 mA sensitivity with earth leakage trip indication complete as per specification.

ITEM No. 153 :- Supplying and erecting CRCA sheet metal one way enclosures of 1.2 millimetre thickness suitable for DP MCB / TP MCB / FP MCB / RCCB / RCBO complete erected on angle iron / GI frame.

ITEM No. 154 :- Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 2 ways (2 poles) for outgoing SP MCBs, with door, 1.2 millimetre thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification.

ITEM No. 155 :- Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places as per specification.

ITEM No. 156 :- Supplying and erecting mains with 1 x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places as per specification.

ITEM No. 157 :- Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places. as per specification.

ITEM No. 158 :- Supplying and erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places. as per specification.

ITEM No. 159 :- Supplying and erecting mains with 1 x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places. as per specification.

ITEM No. 160 :- Supplying and erecting mains with 1x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places. as per specification.

ITEM No. 161 :- Supplying and erecting HMS PVC conduit FRLS grade 25 millimetre diametre with necessary accessories in wall / floor with chiselling appropriately as per specification.

ITEM No. 162 :- Supplying and erecting HMS PVC conduit FRLS grade 32 millimetre diametre with necessary accessories in wall / floor with chiselling appropriately as per specification.

ITEM No. 163 :- Supplying and laying HMS PVC conduit FRLS grade 25 millimetre diametre with necessary accessories in RCC work / false ceiling / false flooring as per specification.

ITEM No. 164 :- Supplying and laying HMS PVC conduit FRLS grade 32 millimetre diametre with necessary accessories in RCC work / false ceiling / false flooring as per specification.

ITEM No. 165 :- Point wiring for light / bell concealed type in min 20 millimetre FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification.

ITEM No. 166 :- Point wiring for ceiling fan concealed type in minimum 20 millimetre FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification.

ITEM No. 167 :- Wiring for plug on board with Switch socket surface / concealed type, copper wiring and earthing and with modular accessories as per specification.

ITEM No. 168 :- Point wiring for light / bell hybrid type (Surface type under false ceiling and concealed type for drops and switch boards on walls) in min 20 millimetre PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification.

ITEM No. 169 :- Point wiring for ceiling fan (Surface type under false ceiling and concealed type for drops and switch boards on walls) in minimum 20 millimetre PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification.

ITEM No. 170 :- Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.

ITEM No. 171 :- Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete.

ITEM No. 172 :- Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

ITEM No. 173 :- Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

ITEM No. 174 :- Supplying and erecting modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete.

ITEM No. 175 :- Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

ITEM No. 176 :- Supplying and erecting PVC Surface modular switch box with double mounting plate for 4 module duly erected.

ITEM No. 177 :- Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

ITEM No. 178 :- Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

ITEM No. 179 :- Supplying and erecting 16 to 32 A, 10kA, DPMCB suitable to fix in 2 module of modular switch in provided box complete and duly concealed with necessary material and connected.

ITEM No. 180 :- Supplying and erecting fan hook box of 10 millimetre M. S. round bar bounded to the R.C.C. bars upto 50 millimetre length each side and pierced through a 16 S.W.G. thick aluminium / M.S. Bowl 100 millimetre diametre or equivalent square size and having depth upto 75 millimetre complete erected with duly painted by one coat of red oxide paint and two coats of paint erected in position and without any leakage of slurry of cement concrete on either side of the box and positioned to the bottom level of the slab.

ITEM No. 181 :- Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

ITEM No. 182 :- Supplying and erecting 16 to 32 A, 10kA, DPMCB suitable to fix in 2 module of modular switch in provided box complete and duly concealed with necessary material and connected.

ITEM No. 183 :- Supplying and erecting LED square / circular Max. 14 W down lighter / Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1500 Lumens, min. efficacy of 110 lumen / W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

ITEM No. 184 :- Supplying and erecting LED Panel Light ( 600 millimetre X 600 millimetre) Maximum 35 W having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min 4200 Lumens, min. efficacy of 120 lumen / W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

ITEM No. 185 :- Supplying and erecting anodized aluminium corridor / passage light LED fitting (4 feet) Max. 22W with high transitivity diffuser with system lumens output of Min.2200 lumens , min. efficacy of 100 lumen / W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver, with end caps on provided PVC Block / wooden board with 3 years warranty.

ITEM No. 186 :- Supplying and erecting integrated LED flood light fitting Max. 50W IP65 and IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 5000 Lumens, min. efficacy of 100 lumen / W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with U shaped bracket with 3 Years warranty as per specification.

ITEM No. 187 :- Supplying and erecting bulk head LED fitting maximum 10W with high transitivity diffuser with system lumens output of min. 1100 lumens, min. efficacy of 110 lumen / W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., THD<10%, p.f. >0.95, operating range of 140-260V, in built surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, IP66, IK09 rated on provided PVC Block / wooden board with 3 years warranty.

ITEM No. 188 :- Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 millimetre, maximum energy consumption of 28W having service ratio (CMM / W) of Min. 8 , PF>0.9, THD<10% without IR remote control / compatible speed regulator, Temperature Rise of maximum 40 deg. C, having external mounted control PCB completely erected in position as per specification.

ITEM No. 189 :- Supplying and erecting ‘B’ class G.I .pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire.

ITEM No. 190 :- Supplying and erecting exhaust fan medium duty 230 V A.C. 50 cycles 225 millimetre 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‘E’ class insulation.

ITEM No. 191 :- Supplying and erecting exhaust fan heavy duty 230 V A.C. 50 cycles 375 / 380 millimetre 1400 RPM complete erected in position as per specification.

ITEM No. 192 :- Supplying, erecting, testing and commissioning self contained water cooler 230 / 250V 50Hz nominal cooling capacity of 80 litres per hour and storage capacity 120 litres with partially stainless steel body as per specification.

ITEM No. 193 :- Supplying and erecting ultra violet storage type water purifier (RO+UV+UF) with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps with output of purified water minimum 0.33 litre / min with activated carbon filter and softener operating on 230V, single phase A.C. supply with UV fail and filter change indication system .(for TDS more than 200)

ITEM No. 194 :- Supplying and erecting street light Wall bracket made from 40 millimetre diametre ‘ G.I. pipe 1.2 metre in total length complete as per specification.

ITEM No. 195 :- Supplying and erecting integrated LED street light fitting 60W IP65 and IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 6600 Lumens, min. efficacy of 110 lumen / W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification.

ITEM No. 196 :- Supplying and erecting PVC insulated PVC round sheathed 2.5 sq.mm (50 no. x 0.25 millimetre diametre) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV

ITEM No. 197 :- Supplying and erecting modular pop up Box 8 module erected with provided AV / HDMI , RJ 45,6 A electrical sockets and switch on provided table.

ITEM No. 198 :- Supplying, fixing, and configuring 24 ports with 4 (SFP+) port, ethernet managed switch with web view / CLI, 6KV surge protection on ethernet port and console port for management in provided rack as per specification no. WG-NWC / GBS (11 for LAN and 2 for CCTV)

ITEM No. 199 :- Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification.

ITEM No. 200 :- Supplying and fixing 9U wall mount rack (Dimension-DxWxH – 500 x 600 x 500 millimetre) as per specification No. WG-NAS / RAK (11 for LAN and 2 for CCTV)

ITEM No. 201 :- Supplying and fixing tool-less IO (Ethernet) flush / surface type in provided modular box as per specification.

ITEM No. 202 :- Supplying, installing and testing UTP connector (RJ-45) as per specification.

ITEM No. 203 :- Supplying and fixing 1 m UTP patch cord of Cat 6 type in position as per specification.

ITEM No. 204 :- Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 1 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

ITEM No. 205 :- Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

ITEM No. 206 :- Supplying and installing cat-6 cable suitable for networking as per specification.

ITEM No. 207 :- Supplying and erecting 2 pair telephone copper cable 0.5 millimetre diametre with high density polyethylene insulation, polyester taped, Nylon Rip Cord and grey colour sheathed with FR PVC, conforming to ITD specification S / WS 113C laid in provided PVC casing capping / conduit as per specification.

ITEM No. 208 :- Supplying, erecting and commissioning MDF Box 50x50 pairs made from minimum 1.5 millimetre thick MS sheet as per specification.

ITEM No. 209 :- Supplying and installing, testing and commissioning of digital (hybrid) type EPABX of 6 x 32 extensions suitable upto 96 extensions complete.

ITEM No. 210 :- Supplying, erecting and commissioning 10 pairs FR junction box with moulded plastic enclosure as per specification.

ITEM No. 211 :- Supplying and erecting modular type telephone socket one gang with safety shutter, duly erected on provided plate and box with wiring connections complete.

ITEM No. 212 :- Supplying, erecting and commissioning 10 pair module for connection and disconnection of telephone cable as per specification.

ITEM No. 213 :- Supplying and erecting 10 pair, 0.5 millimetre diametre jelly filled armoured telephone copper cable with poly-al laminate moisture barrier, polythene sheathed, G.S. Tape armoured polythene jacketed having laid in provided trench as per specification.

ITEM No. 214 :- Supplying, installing, testing and commissioning push button telephone instrument desk top unit as per specification complete.

ITEM No. 215 :- Supplying, installing, testing and commissioning push button telephone instrument desk top / wall mount with caller ID and Speaker unit as per specification complete.

ITEM No. 216 :- Supplying and erecting HMS PVC conduit FRLS grade 25 millimetre diametre with necessary accessories in wall / floor with chiselling appropriately as per specification.

ITEM No. 217 :- Supplying and laying HMS PVC conduit FRLS grade 32 millimetre diametre with necessary accessories in RCC work / false ceiling / false flooring as per specification.

ITEM No. 218 :- Supplying and laying HMS PVC conduit FRLS grade 25 millimetre diametre with necessary accessories in RCC work / false ceiling / false flooring as per specification.

ITEM No. 219 :- 55" LED Ultra HD Display (NSCR) Supplying, installing and Commisioning of 55" LED Ultra HD (4K) Anroid Television Complete With Following Specification Screen LED Series Display Screen Size 1 metre 38 centimetre (55") Resolution 3840 X 2160 Video Picture Engine Crystal Processor 4K One Billion Color Yes PQI (Picture Quality Index)2000 HDR (High Dynamic Range)HDR HDR 10+ Support HLG (Hybrid Log Gamma)Yes Contrast Mega Contrast ColorPur Color Brightness / Color Detection Brightness Detection Contrast Enhancer Yes Auto Motion Plus Yes Audio Dolby Digital Plus Yes Adaptive Sound Adaptive Sound Q-Symphony Q Symphony Sound Output (RMS) 20W Speaker Type2CH Blutooth Audio Yes Connectivity HDMI 3 USB 1 Digital Audio Out (Optical)1 RF In (Terrestrial / Cable input) 1 / 1(Common Use for Terrestrial) / 0 HDMI A / Return Ch. Support Yes eARC Yes HDMI Quick Switch Yes Bluetooth Yes (BT5.2) Power and Eco Solution Power Supply AC220-240V 50 / 60Hz Power Consumption (Maximum)145 W

ITEM No. 220 :- Supplying, Erecting, Testing and Commissioning 5 MP Full IP Dome Camera Complete.Camera Sensor 1 / 2.7", 5.0 megapixel, progressive scan, CMOSLens 2.8mm @ F2.0 DORI Distance 42 Meter Detect Shutter Auto / Manual, 1-1 / 100000s Colour: 0.01 Lux (F2.0, AGC ON)Minimum Illumination OLux with IR on Digital noise reduction 2D / 3D DNR Day / Night IR-cut filter with auto switch (ICR)S / N >52d BIR Range Up to 30 metre (98ft) IR range Wavelength 850nmIR On / Off Control Auto / Manual Defog Digital Defog WDR DWDR Video Max. Resolution 2592 X 1944 Video Compression Ultra 265, H. 265, H.264, MJPEGH.264 code profile Baseline profile, Main Profile Frame Rate Main Stream: 5MP (2592*1944), Max 20fps; Sub Stream: 720P (1280×720), Max 20fps Video Bit Rate 128 Kbps~16 Mbps OSD Up to 4 OSDS Privacy Mask Up to 4 areas ROI Up to 2 areas Motion Detection Up to 4 areas Image White Balance Auto / Outdoor / Fine Tune / Sodium Lamp / Locked / Auto2 Digital noise reduction 2D / 3D DNR Smart IR Support Flip Normal / Vertical / Horizontal / 180° Dewar ping NAHLC Supported BLC Supported Network Protocols IPv4, IGMP, ICMP, ARP, TCP, UDP, DHCP, RTP, RTSP, RTCP, DNS, DDNS, NTP, FTP, UPnP, HTTP, HTTPS, SMTP, SSL, QoS Interface 10 / 100M Base-TX Ethernet Compatible Integration ONVIF (Profile S, Profile T), API Certifications Certifications CE: EN 60950-1 / UL: UL60950-1 / FCC: FCC Part 15

ITEM No. 221 :- Supplying, Erecting, Testing and Commissioning 32 Channel NVR Complete. Video / Audio IP Video Input 32-ch Two-way Audio Input 1-ch, RCA Network Incoming bandwidth 160Mbps Outgoing bandwidth 64 Mbps Remote Users 128 Protocols P2P, UPnP, NTP, DHCP, PPPOE Video / Audio Output HDMI / VGA Output HDMI: 4K (3840x2160) @30, 1920 X 1080p @60, 1920 x 1080p @ 50 , 1600 X 1200 @ 60, 1280 X 1024 @ 60, 1280 X 720 @ 60, 1024 X 768 @ 60 VGA: 1920 X 1080 p @ 60, 1920 X 1080 p @ 50, 1280 X 1024 @ 60, 1280 X 720 @ 60, 1024 X 768 @ 60 Audio Output 1-ch, RCA Recording Resolution 8MP / 5MP / 4MP / 3MP / 1080p / 960p / 720p / 960H / D1 / 2CIF / CIF Synchronous Playback 32-ch Corridor Mode Screen 3 / 4 / 5 / 7 / 9 / 10 / 12 / 16 / 32 Decoding Decoding Format Ultra 265 / H.265 / H.264 Live view / Playback 8MP / 5MP / 4MP / 3MP / 1080p / 960p / 960H / 720p / D1 / 2CIF / CIF Capability 2 x 4K @ 30, 3 x 5MP @ 30, 4 x 4MP @ 30, 5 x 3MP @ 30, 8 x 1080p @ 30, 16 x 720 p @ 30, 32 x D1 Hard disk SATA 2 SATA interfaces Capacity up to 6TB for each disk External Interface Network Interface 2 RJ-45 10 M / 100 M / 1000 M self-adaptive Ethernet Interfaces USB Interface Rear panel: 1 x USB2.0, 1 x USB3.0 Front panel: 1 x USB2.0

ITEM No. 222 :- H.D.D. (NSCR) Supplying, installing, configuring and commissioning of surveillance hard disk Make- WD, Seagate, Tohsiba capacity - 10 TB, Make marketing name surveillance hard disk, interface - SATA 6GB / Second., cache multi segment (MB) -256 Bytes Per second Complete.

ITEM No. 223 :- Supplying and erecting 10m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male / female 19 pin HDMI connectors complete.

100 KVA DG set with amf Panel

ITEM No. 224 :- Supplying, erecting, testing and commissioning of diesel generating set with alternator of 100 kVA output continuous rating, 3 Phase, 415 V, 50 c / s 0.8 p. f. A.C supply, a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation + / - 5 %, with performance class G2 and maximum fuel consumption 17.4 Litres per hour @ 75% loading. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters, switchgears, indicators connected with suitable wires / cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level up to 75 dB at 1.0 m, provided with first filling of oil, diesel not less than 230 Ltr etcetera on provided M-20 Grade CC Foundation as per specification.

ITEM No. 225 :- Supplying, erecting, testing and commissioning of microprocessor based AMF panel suitable for diesel generating set of above 82.5 kVA up to 100 kVA capacity Three phase, 415 Volts, 50Hz A.C. with all standard features, safeties etc as per specification.

ITEM No. 226 :- Excavating hard Rock or bituminous road by chiselling for preparing pit for pole / stay / earth plate / for laying cable / pipe and clearing the site by removing debris and making the site as required complete.

ITEM No. 227 :- Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm. stone metal duly plastered with necessary curing for complete. (pole muffing or any other purpose).

ITEM No. 228 :- Providing Earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing and recording the results as per specification.

ITEM No. 229 :- Providing Earthing with copper earth plate size 30 x 30 x 0.315 centimetre complete with all materials, testing and recording the results as per specification.

ITEM No. 230 :- Supplying, erecting and terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 95 sq. mm. aluminium conductor complete erected with glands and lugs, on wall / trusses / pole or laid in provided trench / pipe as per specification.

Fire Fighting and Fire Alarm System

ITEM No. 231 :- Supplying, installation, testing and commissioning of main fire pump (MFP / EP) suitable for water discharge of 1400 to 1600 LPM at 60 to 50 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 22kW or of suitable kW capacity for manual / automatic operation and consisting of following : (a) Horizontal type, single stage, centrifugal / split casing pump of cast iron body and bronze impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etcetera as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification.

ITEM No. 232 :- Supplying, installation, testing and commissioning of main fire pump (MFP / DP) suitable for water discharge of 1600 to 1800 LPM at 70 to 50 metre head driven by 45 HP or suitable HP capacity diesel engine at required working speed suitable for manual / automatic operation and consisting of following : (a) Horizontal type, single stage, centrifugal casing pump of cast iron body and bronze impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520. (b) Water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 / 24 volts DC electric starting equipment with battery of required AH capacity with necessary charger suitable to work on 230v, 50Hz AC supply, diesel tank of minimum 150 litres capacity with first filling of diesel up to 100% level with necessary piping with valves up to engine, exhaust pipe extended up to 10 metre outside pump house duly insulated with 50 millimetre thick glass wool with 1.0 millimetre thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications etcetera as required. (c) M. S. fabricated common base plate, coupling, coupling guard, foundation bolts etcetera as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with engine assembly and accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification.

ITEM No. 233 :- Supplying, installation, testing and commissioning of jockey fire pump (JP) suitable for water discharge of 180 to 240 LPM at 70 to 50 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 5.5 kW or of suitable kW capacity for manual / automatic operation and consisting of following : (a) Horizontal / vertical type, multi stage, centrifugal casing pump of cast iron body and bronze impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etcetera as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification.

ITEM No. 234 :- Supplying, installation, testing and commissioning of booster fire pump [BP] suitable for water discharge of 450 LPM at 35 metre head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 5.5 kW or of suitable kW capacity for manual / automatic operation and consisting of following : (a) Horizontal / vertical type, single / multi stage, centrifugal casing pump of cast iron body and bronze / CI impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etcetera as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification.

ITEM No. 235 :- Carrying out core cutting of size 3" to 5" diametre x 15" length in the C.C. / rock / stone wall with the help of specialized core cutting machine in proper manner and finishing the site as original.

ITEM No. 236 :- Supplying, erecting, testing and commissioning of fire pump control panel (FCP) of cubical construction, floor mounted type, fabricated from minimum 2 millimetre thick CRCA sheet, compartmen- talised with hinged lockable doors, with enclosure protection class IP54, duly powder coated or painted with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003), cable alley, interconnection with suitable size solid copper busbar strip of adequate size for all power connections having switchgears and accessories, mountings and internal wiring with adequate size copper conductor cable, earth terminals, numbering etcetera complete in all respect, suitable for satisfactory operation of main fire pump and jockey (pressurisation) pumps (1 working + 1 standby) with necessary accessories, wiring and cabling along with allied accessories with following incoming and outgoings, suitable for automatic and manual operation on 415V, 3 phase, 50Hz ac supply as per specifications the capacity of electric motor driven pump are as follows a. Main fire pump(MFP) having capacity of 22kW 1no (1 working) b. Jockey pump(JP) capacity of suitable capacity 2 nos(1 working +1 standby, alternate run per start in auto mode) comprises of the following features and switchgears: 1. Main incomer FP SFU having rotary handle with HRC fuses of suitable rating. 2. Electrolytic grade copper strips for busbar of suitable sizes for main incomer and branches to motor SFU's, starters and outgoing terminals with necessary accessories like stainless steel nut bolts with spring washers for connections, mounted on required no of epoxy or porcelain support insulators of suitable ratings etcetera 3. Individual pump TPN SFU having rotary handle with HRC fuses of suitable rating.

ITEM No. 237 :- Providing Earthing with galvanized iron earth plate size 60 x 60 x 0.60 centimetre complete with all materials, testing and recording the results as per specification.

ITEM No. 238 :- Excavating hard Rock or bituminous road by chiselling for preparing pit for pole / stay / earth plate / for laying cable / pipe and clearing the site by removing debris and making the site as required complete.

ITEM No. 239 :- Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) millimetre stone metal duly plastered with necessary curing for complete. (pole muffing or any other purpose).

ITEM No. 240 :- Providing coating of bitumen paint and 4 millimetre thick wrapping for underground 150 millimetre ring main of fire fighting system.

ITEM No. 241 :- Supplying and erecting G.I. pipe ‘C’ class ERW 200 millimetre diametre with necessary fittings complete as per specification.

ITEM No. 242 :- Supplying and erecting G.I. pipe ‘C’ class ERW 150 millimetre diametre with necessary fittings complete as per specification.

ITEM No. 243 :- Supplying and erecting G. I. pipe ‘C’ class ERW 100 millimetre diametre with necessary fittings complete as per specification.

ITEM No. 244 :- Supplying and erecting G.I. pipe ‘C’ class ERW 65 millimetre diametre with necessary fittings complete as per specification.

ITEM No. 245 :- Supplying and erecting G.I. pipe ‘C’ class ERW 50 millimetre diametre with necessary fittings complete as per specification.

ITEM No. 246 :- Supplying and erecting ISI mark GI pipe 32 millimetre diametre ‘C” class at position with accessories complete. Specification.

ITEM No. 247 :- Supplying and erecting G.I. pipe ‘C’ class ERW 25 millimetre diametre with necessary fittings complete as per specification.

ITEM No. 248 :- Supplying and erecting 100 millimetre diametre cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification.

ITEM No. 249 :- Supplying and erecting 100 millimetre diametre cast iron double flange NRV complete with PN16 pressure rating, as per specification.

ITEM No. 250 :- Supplying and erecting 100 millimetre diametre cast iron foot valve ball type / flap type with strainer for negative suction complete as per specification.

ITEM No. 251 :- Supplying and erecting 150 millimetre diametre cast iron foot valve ball type / flap type with strainer for negative suction complete as per specification.

ITEM No. 252 :- Supplying and erecting 150 millimetre diametre cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification.

ITEM No. 253 :- Supplying and erecting 100 millimetre diametre Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification.

ITEM No. 254 :- Supplying and erecting 25 millimetre diametre gun metal gate valve complete with PN16 pressure rating, as per specification.

ITEM No. 255 :- Supplying and erecting 20 / 25 millimetre diametre gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification.

ITEM No. 256 :- Supplying and erecting 100 mm dia. pressure gauge , 0-300 PSI or 0-14 kg per cm square fitted with 12 / 15 millimetre diametre pad cock valve, erected with provided G.I. pipe, elbow etcetera complete as per specification.

ITEM No. 257 :- Supplying and erecting 12 / 15 millimetre diametre pressure switch with provided isolation valve, G.I. nipple, elbow, etc complete as per specification.

ITEM No. 258 :- Supplying and erecting 300 millimetre diametre 1.5 metre in height air vessel / tank fabricated from minimum 5 millimetre thick M.S. sheet complete as per specification.

ITEM No. 259 :- Supplying and installing one piece moulded HDPE / fibre water tank for negative suction only, having capacity 1000 litres fitted with necessary accessories complete as per specification.

ITEM No. 260 :- Providing and fixing high-density polyethylene (HDPE) container one piece moulded triple layer water tank made out of high density polyethylene and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow pipe inclusive of all tanks capacity up to 20000 litres.

ITEM No. 261 :- Supplying, erecting and terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 70 sq. mm. aluminium conductor complete erected with glands and lugs, on wall / trusses / pole or laid in provided trench / pipe as per specification.

ITEM No. 262 :- Supplying, erecting and terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 50 sq. mm. aluminium conductor complete erected with glands and lugs, on wall / trusses / pole or laid in provided trench / pipe as per specification.

ITEM No. 263 :- Supplying, erecting and terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. aluminium conductor complete erected with glands and lugs, on wall / trusses / pole or laid in provided trench / pipe as per specification.

ITEM No. 264 :- Supplying, installing, testing and commissioning FRLS, XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall / ceiling complete as per specification.

ITEM No. 265 :- Supplying, erecting and terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. aluminium conductor complete erected with glands and lugs, on wall / trusses / pole or laid in provided trench / pipe as per specification.

ITEM No. 266 :- Supplying and erecting stainless steel single outlet hydrant valve fitted with necessary accessories complete as per specification.

ITEM No. 267 :- Supplying and erecting M.S. / CRCA cabinet for housing single hydrant valve of size (400 X 400 X 400) millimetre or hose pipe box of size ( 600 X 600 X 200) millimetre made from minimum 1.5 millimetre thick CRCA sheet with angle iron work of minimum of size (25 x 25 x 4) millimetre having front doors with viewing glass of size (200 X 150) millimetre and locking arrangement with necessary fixing material such as rubber bidding etcetre duly painted in post box red colour( Code 538 of IS -5)

ITEM No. 268 :- Supplying and erecting M.S. / CRCA cabinet for housing Floor Hydrant valve, hose pipe, hose reel and branch pipe (size 1000 x 736 x 736 millimetre) made from 16 SWG sheet and angle iron 25 x 25 x 4 millimetre having front doors with viewing glass (8"x6") and locking arrangement with necessary fixing material such as rubber bidding etcetera duly painted in post box red colour( Code 538 of IS 5)

ITEM No. 269 :- Supplying and erecting 63 millimetre diametre, reinforced rubber lined (R.R.L.) hose pipe, 15 metre in length, fitted with necessary accessories complete as per specification.

ITEM No. 270 :- Supplying and erecting gun metal branch pipe of 63 millimetre diametre fitted with 20 millimetre diametre detachable hexagonal nozzle complete as per specification.

ITEM No. 271 :- Supplying and installing wall mounting swinging hose reel drum fitted with 19 millimetre diametre 30 metre long high pressure polypropylene (Polyhose) along with necessary accessories complete as per specification.

ITEM No. 272 :- Supplying and erecting 150 millimetre diametre fire brigade header suitable for supplying water in fire tank complete as per specification.

ITEM No. 273 :- Supplying and erecting fire brigade header (Siamese connection) of 150 millimetre diametre, for supplying water in fire tank complete as per specification.

ITEM No. 274 :- Supplying and erecting brass orifice plate having 6 millimetre thickness, 140 millimetre outer diametre with required diameter of inner hole at every single outlet hydrant valve as per specification.

ITEM No. 275 :- Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the 4 loop capacity and capable of supporting upto 250 devices and detectors per loop, with on-board LCD display with minimum 16 lines of text, operating at 230 V 50 HZ - AC with inbuilt Battery Backup of a minimum 24 hours in normal condition and 30 minimum in alarm condition, suitable provision for network connectivity, interfacing with third party equipment via a MODBUS / OPC / L-ON interface etcetre conforming to IS 15908:2021, ,IS 2189: 2008, EN 54 and VDS / FM / UL 864 (10th edition) with 3 years replacement warranty

ITEM No. 276 :- Supplying, installing, testing and commissioning of addressable optical smoke detector, single / twin LED’s with 360 degree view, suitable for low voltage 15 to 32 V DC two wires supply, in-built locking mechanism to check the removal and pilferage of the detector, in built isolation mode, start up current 300µA and alarm condition current shall be maximum 6.5 mA, operating temperature 0°C to 50°C, humidity 0-95% RH, IP 41, conforming to IS 2189: 2008, 11360_1985_Reff2020 EN 54 or UL Approved with 3 years equipment replacement warranty

ITEM No. 277 :- Supplying, installing, testing and commissioning of intelligent addressable thermal / heat detector with rate of rise cum fixed temperature thermistor complete with base as required, suitable for temperature variations from -20°C to 38°C for fixed-heat and rate-of-rise type detectors and 0°C to 66°C for high heat type detectors, in built isolation mode, suitable for offices / ceiling cable trenches / less ventilation area's etcetera with 3 years equipment replacement warranty IS : 2175 - 1988 reaffirmed 2000, IS 15908:2021 standards.

ITEM No. 278 :- Supplying, installing, testing and commissioning remote response indicators suitable to operate on 5 - 28 V dc supply having FR Polymer ABS Housing complete as per specification no.

ITEM No. 279 :- Supplying, installing, testing and commissioning of addressable fire control / relay module complete as required, with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 reed relays, EN 54 or UL Listed

ITEM No. 280 :- Supplying, installing, testing and commissioning of addressable fire monitor module complete as required. EN 54 or UL Listed with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 Reed relays

ITEM No. 281 :- Supplying, installing, testing and commissioning of addressable fire isolator module complete as required. EN 54 / FM or UL Listed with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 Reed relays

ITEM No. 282 :- Supplying, installing, testing and commissioning of addressable manual call points ( break glass type / pull station type), made of addressable break glass plastic square in shape surface / flush mounted with "Break Glass" massage embedded on the glass, complete erected with mounting base and required accessories conforming to EN 54 or UL listed with 3 years equipment replacement warranty

ITEM No. 283 :- Supplying, installing, testing and commissioning of addressable horn cum strobe sound / hooter, output frequency 500 to 1000 Hz with dB as per Chart given in IS 15908:2021, with flashing at 1 Hz over the strobe’s entire operating voltage range EN 54, conforming to IS 2189: 2008, IS 15908:2021 standards with 3 years equipment replacement warranty

ITEM No. 284 :- Supplying and erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kilogram capacity cartridge type conform to IS 2878 / 15683 complete erected with necessary clamp made from 50 x 6 millimetre M. S. flat with nut and bolts routed in wall complete.

ITEM No. 285 :- Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 / 15683 of 6 kilogram capacity with necessary clamp for erection on wall.

ITEM No. 286 :- Supplying, erecting, testing and commissioning of quartzoid bulb sprinkler, 15 millimetre (½") diametre NBCM Body chrome finished, 68º C fixed temperature rating with deflector disc of conventional construction complete as per specification.

ITEM No. 287 :- Supplying, erecting, testing and commissioning vane type water flow detector 100 millimetre diametre with 1) Visual switch activation 2) Rugged switch assembly 3) Heavy duty aluminium pipe saddles 4)Durable metal enclosure 5) Steel U bolts for secure mounting 6) Two SPDT ( Single pole double track ) synchronised switches 7) serviceable without draining pipes.

ITEM No. 288 :- Supplying, erecting, testing and commissioning 120 W amplifier suitable to operate on 230 Volts A.C. / 12 Volts D.C. supply complete as per specification.

ITEM No. 289 :- Supplying, erecting, testing and commissioning 15 to 30 Watts sound column or ceiling mounted complete as per specification.

ITEM No. 290 :- Supplying, erecting, testing and commissioning stand mounted / handheld type wired microphone having 2 mV / Pa sensitivity, impedance level limit 300 ohms and 50 - 16000 Hz suitable to operate in -10 deg C to +55 deg C with minimum 7 metre shielded cable and 3 Pin Professional XLR Connector, stereo jack complete as per specification.

ITEM No. 291 :- Supplying, erecting, testing and commissioning rust free microphone table stand of chrome plating / powder coating or S.S. material, up to 500 mm height and suitable base for sturdy mechanism ensuring trouble free movement complete.

ITEM No. 292 :- Supplying, erecting, testing and commissioning of 2 core shielded cable complete as per specification no.

ITEM No. 293 :- Supplying and laying HMS PVC conduit FRLS grade 20 mm dia. with necessary accessories in RCC work / false ceiling / false flooring as per specification.

ITEM No. 294 :- Supplying and erecting HMS PVC conduit FRLS grade 25 millimetre diametre with necessary accessories in wall / floor with chiselling appropriately as per specification.

ITEM No. 295 :- Supplying, erecting, testing and commissioning of 1.5 sq.mm. speaker wire complete.

Street Light and Submersible Water pumps on sump-well in the premises

ITEM No. 297 :- Supplying, erecting and terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 sq. mm. aluminium conductor complete erected with glands and lugs, on wall / trusses / pole or laid in provided trench / pipe as per specification.

ITEM No. 298 :- Supplying, erecting and terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. aluminium conductor complete erected with glands and lugs, on wall / trusses / pole or laid in provided trench / pipe as per specification.

ITEM No. 299 :- Supplying, erecting and terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 35 sq. mm. aluminium conductor complete erected with glands and lugs, on wall / trusses / pole or laid in provided trench / pipe as per specification.

ITEM No. 300 :- Supplying and laying (including excavation of suitable width and depth up to 90 centimetre) 50 millimetre outside diametre double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground / road surface, to required depth complete.

ITEM No. 301 :- Providing pipe type earthing with 40 millimetre diametre Galvanised Iron pipe or 20 millimetre diametre Galvanised Iron Rod complete with all materials testing and recording the results as per specification.

ITEM No. 302 :- Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 centimetre complete with all materials, testing and recording the results as per specification.

ITEM No. 303 :- Supplying and erecting triple pole and neutral distribution board (TPNDB), 3 pole / 4 pole MCCB as incomer and outgoing SP MCB (12 poles) or TP MCB of 4 ways (12 poles), with door, 1.2 millimetre thickness, surface / flush mounted, on iron / GI frame (vertical busbar type) as per specification.

ITEM No. 304 :- Providing and erecting 3 Pole MCCB, 415 V, 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt / UV / trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure / panel as per specification.

ITEM No. 305 :- Supplying, erecting and marking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

ITEM No. 306 :- Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etcetera for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

ITEM No. 307 :- Supplying and erecting plywood 12 millimetre thick fixed to wall or on provided panel board with necessary materials such as screws, wall fasteners supports, nuts bolts etcetera complete.

ITEM No. 308 :- Supplying and erecting minimum Three and above star rated submersible pump set suitable for erection on open well of 2.25 KW / 3 HP with 415 V 50 c / s. A.C. supply, having delivery head from 27 to 9 metre and discharge from 300 to 660 litres per minute and pipe of Suction 65 millimetre / Delivery 50 millimetre diameter erected with necessary H type clamps as per specification.

ITEM No. 309 :- Supplying and erecting flat flexible 3 core 4 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.

ITEM No. 310 :- Supplying and erecting Water level controller 230 / 415 V, A.C., Four way under ground and Over head tank operation only.

ITEM No. 311 :- Supplying and erecting Float sensor switch for water level controller working on 250V and rated current 8A, with 2 metre wire and High quality of wire and plastic body.

ITEM No. 312 :- Supplying and erecting PVC insulated PVC round sheathed 1.5 sq.mm (30 numbers x 0.25 millimetre diametre) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV

ITEM No. 313 :- Supplying and erecting automatic control panel for 3 Phase, 415 volt, A.C, Submersible / centrifugal pump set up to 7.5 HP consisting of DOL starter having relay range 9-14 AMP, S.P.P., Combined ammeter / voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etcetera.

ITEM No. 314 :- Supplying, erecting and marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

ITEM No. 315 :- Supplying and erecting CRCA sheet metal one way enclosures of 1.2 millimetre thickness suitable for DP MCB / TP MCB / FP MCB / RCCB / RCBO complete erected on angle iron / GI frame.

ITEM No. 316 :- Supplying and erecting 525 V 3 phase, 50 Hz., MPP type capacitor having minimum overcurrent capacity of 1.8 In, peak inrush current capacity 300 In and minimum life 150000 hours kVAr bank of metalised polypropylene condensers (MPP) with the standard capacities of 2, 3, 5, 7, 10, 12.5 and 15 kVAr units of P.F. correction for operation on 3 phase 50 Hz. with externally discharging resistances, earthing terminals and built on angle iron or channel iron frame work and provided with terminal cover box complete erected on provided iron bracket or on floor duly tested by licensee.

ITEM No. 317 :- Supplying and erecting four pole ON LOAD change over switch, 415V, 40A, open execution having staggered termination, phase barrier, shroud termination and terminal cover along with auxiliary contacts and ready to upgrade with fuse protection kit, rotary handle, operational current category AC23A complying to IS / IEC 60947-3 Part-1 / 3.

ITEM No. 318 :- Supplying and erecting ISI mark GI pipe 50 mm diametre ‘B’ class at position with accessories complete as per specification.

ITEM No. 319 :- Supplying and erecting non return valve 50 millimetre diametre in position made of gun metal complete.

ITEM No. 320 :- Supplying and erecting 50 millimetre diametre gun metal sluice valve at position with necessary materials complete.

ITEM No. 321 :- Providing and erecting 6 metre high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 millimetre A / F, top 70 millimetre A / F on provided foundation as per specification.

ITEM No. 322 :- Providing and erecting galvanised 1000 millimetre single arm sword type bracket with FRP dome and ball as per specification.

ITEM No. 323 :- Providing and erecting galvanised 1000 millimetre double arm sword type bracket with FRP dome and ball as per specification.

ITEM No. 324 :- Supplying, erecting and marking SPMCB 0.5A to 5A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

ITEM No. 325 :- Supplying and erecting integrated LED street light fitting 60W IP65 and IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 6600 Lumens, min. efficacy of 110 lumen / W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification.

ITEM No. 326 :- Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T / sq.m at 1.5 metre depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6 metre to 8 metre high octagonal / conical GI pole).

Split Type and Cassette type Air Conditioning

ITEM No. 327 :- Supplying, installing, testing and commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.7TR to 2.0TR capacity having ISEER minimum 3.8 to maximum 4.39 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall / floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation and temperature display on indoor unit, noise level maximum 50dBA at position as per specification.

ITEM No. 328 :- Supplying, installing, testing and commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.0TR to 1.2TR capacity having ISEER minimum 3.8 to maximum 4.39 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall / floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation and temperature display on indoor unit, noise level maximum 50dBA at position as per specification.

ITEM No. 329 :- Supplying, installing, testing and commissioning cassette type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor room Air conditioning unit 1.8TR to 2.1TR capacity having ISEER minimum 5.00 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall / floor mounting type complete with refrigerant R32 / R410A having copper condenser, dust filter, self diagnosis feature, stabilizer free operation, noise level maximum 50dBA at position as per specification.

ITEM No. 330 :- Supplying, installing, testing and commissioning cassette type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor room Air conditioning unit 2.5TR to 2.7TR capacity having ISEER minimum 5.00 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall / floor mounting type complete with refrigerant R32 / R410A having copper condenser, dust filter, self diagnosis feature, stabilizer free operation, noise level maximum 50dBA at position as per specification.

ITEM No. 331 :- Supplying and erecting seamless outside and inside, smooth, dry and clean copper pipe with ROHS compliant suitable for refrigerant having 22SWG thickness and inner diametre / size 12 millimetre complete.

ITEM No. 332 :- Supplying and erecting seamless outside and inside, smooth, dry and clean copper pipe with ROHS compliant suitable for refrigerant having 22SWG thickness and inner diametre / size 22 millimetre complete.

ITEM No. 333 :- Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PC / copper pipes having 9 millimetre thickness and inner diameter / sizes 12 millimetre for solar water heater / AC system.

ITEM No. 334 :- Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PC / copper pipes having 9 millimetre thickness and inner diameter / sizes 22 millimetre for solar water heater / AC system.

ITEM No. 335 :- Supplying and laying HMS PVC conduit FRLS grade 20 millimetre diametre with necessary accessories in RCC work / false ceiling / false flooring as per specification.

ITEM No. 336 :- Supplying and erecting PVC insulated PVC round sheathed 4 sq.mm (56 number x 0.30 millimetre diametre) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV

ITEM No. 337 :- Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etcetre for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

Providing Lifts : 10 passenger 2 Numbers and 13 passenger 1 Number

ITEM No. 338 :- SITC of Electric Traction Passenger Lift with · Rated capacity :- 10 Passenger / 680Kg · Floors :- G+1 floor (2 Stops / 2 Landings) · Travel :- 3 to 4.2 metres · Location of Lift Machine:- MR · Rated speed :- 1.0mps VS · Car / Landing door clear opening of 800 millimetre wide x 2000 mm high · Clear Car size of 1300 millimetre wide x 1350 millimetre deep x 2250 millimetre high. · Lift shaft available having clear size of 2100 millimetre wide x 2400 millimetre deep, 1500 millimetre Pit depth, 4200 millimetre Overhead. (2 NOS) · Lift shaft available having clear size of 2300 millimetre wide x 3070 millimetre deep, 1500 millimetre Pit depth, 4200 millimetre Overhead. (1 NOS) · Doors type :- COPO / TOPO Doors with frame made from SS 304 grade solid(non-cladded) sheet of 1.5 millimere thick in hairline finish for car and all landing doors with SS door architraves / frames The lift doors shall have minimum 1 hour fire rating (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory). · Lift car enclosure made from SS 304 grade solid (non-cladded) sheet of 1.5 millimetre, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower / fan for ventilation and SS chequered plate flooring, handrails, mirror, emergency light etcetera The lift car interior design shall be done as per the directions of engineer in charge. · COP with SS face plate having metallic push buttons with Braille code and luminous indicator around button with FPI, scrolling UP / DN LED indicator and with / without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi and English with intercom system with telephone instrument in Lift car, LMR and FCC / ground floor. · LOP with SS face plate having recess / surface push button box for all landings with scrolling UP / DN LED indicator having metallic push buttons with Braille code and luminous indicator around button with CPI, Lift car arrival and next travel direction audio-visual indication at all landings. · Lift controller based on microprocessor / PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port. The controller shall have necessary protections such as overcurrent, overvoltage, over speed, overheat for all devices including lift motor and travel direction protection, protection for phase loss at input or output etcetera various operation modes such as maintenance, change direction by attendant, full load bypass, VIP call operation, self levelling operation, call cancel facility, auto return to home landing, fireman evacuation operation, earthquake operation, door open / close operation from COP etcetera The system can record information for minimum 30 latest faults, with real-time clock management and handheld keypad with LCD screen for view and setting of parameters. The control panel duly wired with proper size and strength, copper wire for power and control circuit, with provision for addition of floor / control card and allied accessories control panel having enclosure of 1.5 millimetre CRCA sheet with powder coating with IP54 Protection class. · ARD complete with necessary SMF VRLA batteries. · Fireman controller having fireman switch at fire Landing. · CCTV surveillance system comprises of 2 numbers minimum 2.0 MP FHD IP based vandal proof Dome camera in lift car and in LMR / inside lift shaft top aimed on Lift machinery and controller with NVR kept in LMR / FCC with HDR data backup for min. 90 days with minimum 18” FHD TV monitor, to be kept in FCC / LMR as directed by Engineer in Charge. · Lift Machine of Gearless PMSM of suitable kW with duty cycle of minimum 120 starts / hr (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory), with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor / shaft walls complete with main / diverter traction sheaves, suspension wire ropes / belts of adequate size and strength. · Other mechanical parts such as 'T' section adequate size guide rails for car and counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etcetera erected with necessary steel work. · Minor civil work such as alteration work if any necessary for erection of landing door frames and it's accessories e.g. sill, header, hole pass etc complete with plaster finish, civil work for erection buffers, erection of lift machinery, adequate size core cuts if required and scaffolding for erecting guide rails, providing and fixing steel girders / RCC work having adequate strength for mounting and hoisting lift machine etcetera complete as per specification no. LFT. · General :- Job includes entire procedure of obtaining all necessary erection permissions and "License to Work the Lift" from Electrical Inspector(Lifts) with submission to the Engineer in Charge. · The above rate includes Fully Comprehensive AMC for one year from the date of commissioning.

Pawar Patkar Constructions Pvt.Ltd.

K H CONSTRUCTION