Karnataka

To Be Opened

Works

Electrical

Providing new Panel Board and rewiring with new fixtures for NSS Bhavan at Jnanabharathi Campus, Bangalore University, Bangalore

Bangalore University

Registrar Office Bangalore University | Bengaluru Urban, Karnataka

Amount: Refer DocsCloses: 6 Jul 2026Closed

Timeline

Published19 Jun 2026
Closed6 Jul 2026

Tender Value

Refer Docs

EMD Value

₹35,200

Closing Date

6 Jul 2026, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Bangalore University

Contact Person

University Engineer

Mobile Number

Work Description

Providing new Panel Board and rewiring with new fixtures

Tender Information

Tender ID

BU/2026-27/EL/WORK_INDENT93

Reference Number

BU/2026-27/EL/WORK_INDENT93

Tender Type

Open

Product Category

Electrical

Form of Contract

Electronic Documents, First(One Cover)

Location

Registrar Office Bangalore University

Source Website

Subscribe to view

Documents Required

8 documents required · 8 mandatory

Technical Bid

RequiredAnnual Turnover Certificate certificate issued by Approved Chartered Accountant with UDIN i.e., 2021-22, 2022-23, 2023-24, 2024-25, 2025-26 as KW Doc - 14.07 Lakhs

RequiredKPWD Class-IV and above Electrical Registration Certificate

RequiredSimilar Work done certificate as per KW Doc 50 percent amount put to tender i.e., Rs.7.05 Lakhs certificate should be issued not below the rank of Executive Engineer

RequiredTotal value of Electrical engineering works executed and payments received in the last five years

RequiredList of existing commitments and ongoing work

RequiredList of works for which tenders already submitted

RequiredBidder personal No.,address and Bankers details for communication

RequiredAssessed available tender capacity-AxNx2.5 -B should be greater than or equal to Rs.14.07 Lakhs

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

If any tenderer qoutes less than SR amount, he has to remitt the unbalanced tender amount in the form FDR in favour of Finance officer, Bangalore University has guarantee amount which will be refund after successful completion of work.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Contractor with Karnataka PWD Class-4 & above Electrical registration can be eligible for participation.

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing work

List of works for which tenders already submitted

Banker Details

Bidder mandating Satisfactorily completion as prime contractor for at least one similar nature of work of value not less than Rs. 7.05 Lakhs (Updated to 2026-27 Price level) should be counter signed by the Employer in Charge not below the rank of Executive Engineer or Equivalent.

Tenderers should not be associated or have been associated in the past, directly or indirectly, with a firm or any of its affiliates which have been engaged by the Purchaser to provide consulting services for the preparation of the design, specifications, and other documents to be used for the procurement of the goods under this Invitation for Tenders.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non accessibility of Karnataka Public Procurement portal due to internet connectivity issues and technical glitches at bidders end.

The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs. The cost of the Tender Processing shall not be refundable.

EMD should be paid as specified in the tender document available in Karnataka public procurement portal.

The EMD & Tender processing fee shall be paid through Karnataka public procurement portal only as per the e-procurement rules

The EMD and Security Deposit are liable to be forfeited as liquidated damages in the event of any evasion, refusal or delay on his/her part in signing the contract form. The other Terms and Conditions are as stipulated Standard Tender Document of Government of Karnataka

The Tenderers need to register with Karnataka public procurement portal and to obtain user ID and Password for participating in the Tender process

For any clarification refer the bid documents or contact University Engineer on all working days between 10.30 AM to 4.30 PM

Bidders should abide by other terms & conditions as prescribed in relevant KTPP rules, KTPP Act and standard tender document.

All the relevant Documents must be uploaded in Pdf and excel format only.

Bidder has to qoute the rates excluding GST and The GST shall not be paid in the extended period of contract for which the Contractor alone is responsible for delay as determined by the authority while granting the extension of time. The Government and the Contractor are abide to any increase or decrease in GST during agreement period.

Should submit the Attested copy of the Turnover certificates of last 5 Finacial years (2021-22 to 2025-26) issued by the Chartered Accountant

Royalty on construction materials and other taxes will be deducted as per prevailing Govt orders

As per Government order LD/300/LET/2006 Bangalore dated 1.01.2007 nad Government letter no PW/134/BMS/2007 dated 27.07.2007, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund

All scanned documents to be uploaded shall be in original and the Executive Engineer reserves the right to verify the documents before approval and all the formats prescribed in the bid document shall be filled by the tenderer in complete manner otherwise tender will be rejected.

Materials required for the work shall be procured by the tenderer themselves and should got tested by the quality control authority before use on the work.

Contractor should adhere to HSE (Health Safety Environment) policy and Environmental policies applicable for the projects.

Contractors are responsible for ensuring Safety and also whole & Sole responsibility for any injury or risk factors of workers

Contractor should take all precautions to ensure that no damage is caused to the existing public/ private properties which have been constructed by other agencies during project execution. If any damage is caused, it has to be rectified at his own risk and cost.

Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value as mentioned in the Bid Doc.

Work Locations

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹35,200

Important Dates

Last Activity

19 Jun 2026

Published

19 Jun 2026

Download Ends

4 Jul 2026

BOQ Preview

•

Providing new Panel Board and rewiring with new fixtures for NSS Bhavan at Jnanabharathi Campus, Bangalore University, Bangalore

•

Open Conduit System: Supplying heavy gauge PVC conduit pipe ……mm dia.mm thick confirming to IS 2509 with suitable size bends, metal / PVC junction boxes, adhesive paste etc., and fixing using inve...

•

Supplying heavy gauge PVC Conduit Pipe .dia .mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by groove cutting in the wall and fix...

•

Point wiring using copper wire with switch: Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5 Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multistr...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying and flush mounting powder coated / galvanised metalbox suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/C.C wall. 4 - 5 W...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A one way Switch ---- With all lead and lift including cost and conveyance ...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Three way socket ---- With all lead and lift including cost and conveya...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped fan Regulator Two Module ---- With all lead and lift including cost ...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16A one way switch ---- With all lead and lift including cost and conveya...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32 A DP Switch ---- With all lead and lift including cost and conveyance of ...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket ---- With all lead and lift including cost and c...

•

Supplying push button operated direct online starter with an antiweld silver cadmium oxide contactor with replaceable fixed and movng contacts and bimetallic thermal overload relay help in anticorrosi...

•

Supplying fully automatic star delta starter unit push button type with suitable wires, 3 contactors, one adjustable thermal timer mounted on a common base plate held in steel enclosure for use on 400...

•

Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to 13:8130-1984 and virg...

•

Supplying of .feet - PVC Batten with integrated LED tube.W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V @ 50/60Hz...

•

Fixing all types and all capacities of flurescent/ false ceiling/spot light/CFL/LED Light fittings indoor on the wall / ceiling / rafters / girders with necessary supporting frame, using 23/0.0076” ...

•

Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS:1709/1984 with latest amendment, Rated voltage 220 V/ 50 Hz, Rated power upto...

•

Supplying wall mounting fan suitable to operate at single phase 230v A.C supply. 300 mm Sweep Pg30 of 105I.No 6.5.1PWDELE.SR 2023-24Vol-6 ---- With all lead and lift including cost and conveyance of a...

•

Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing S hook with fan regulator to the existing board together with wupplying and fixing a 5 amperes ceiling rose, necess...

•

Supplying of 1440 rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC supply complete. 12" Sweep (300mm) ---- With all lead and lift including cost and conveyance of al...

•

Supplying of 1440 rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC supply complete. 15" Sweep (450mm) ---- With all lead and lift including cost and conveyance of al...

•

Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire. ---- With all lead and lift...

•

Supplying & Fixing Regular MCB distribution boards on wall/wood board/flush mounting using required clamps, bolts, nuts etc,.with provision for fixing suitable type capacity MCB's single phase/3 phase...

•

Supplying and fixing miniature circuit breakers/isolators on existing MCB distribution boards using necessary fixing materials and 'C' type curve, indicator ON/OFF, energy cross - 3 with short circuit...

•

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...

•

Supplying and fixing of -mm dia class AGI Pipe bracket upto 2mtrs long bent at suitable angle and fixing to this bracket streetlight fitting of all capacities of GI or GI or rail or RCC pole/wall usin...

•

Fixing halogen/metal halide /SVL/IL/LED flood light fitting over existing pole/wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. ---- With all lead and lift includin...

•

Supplying, Fixing & Wiring earth electrode for Grounding conduits,I.C.cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr. Long buried in a pit. The pit should ...

•

Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25 x 6 mm GI strip ---- With all lead and lift including cost and conveyance of all m...

•

1.1 KV XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured LT UG cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 70 sqmm...

•

Laying of cable in existing trench/GI pipe/stoneware/ RCC hume pipe using wooden/auminium rollers as directed by the departmental staff. LT cable. 35 to 95 Sqmm ---- With all lead and lift including c...

•

Supplying and fixing of porcelein fuse channel with cutout on existing wooden/panel using ecessary nuts, bolts and washers. 100 A ---- With all lead and lift including cost and conveyance of all mater...

•

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts necessary phase sepertors, handle and wiring complete. Protection of Ove...

•

Fabricating supplying and mounting MS box made out -SWG suitable for floor/ wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped wi...

•

Supplying, fixing and wiring 3 Phase Digital Ammeter /Voltmeter. ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and a...

•

Supplying and Fixing of LED type panel board indicating lamp with required colour suitable for 230/440V AC. 50Hz 12/24V D.C. ---- With all lead and lift including cost and conveyance of all materials,...

•

Supplying, fixing and wiring 50/5 to 1000/5A to 1600/5A 15VA burden class 1 Current Transformer. ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all ...

•

Supplying -A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are m...

•

LT 3 Phase 4 wire CT operated DLMS Complaint ETV meter-5A, class 0.5s Accuracy (Used for 25 HP/18KW & above Installations, DTC Metering) ---- With all lead and lift including cost and conveyance of al...

•

Supplying .-litres capacity vertical/horizontal type wall mounting Electrical water heater with 22 SWG copper/SS sheet metal inner Container tinned inside Fiber body outside, filled with glass wool be...

•

Erection charges for fixing a . litres capacity wall mounting electric geysers using bolts, flat at one end nut and washers at the other end for through bolts and nuts and washers with 150x450x600mm b...

•

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

TN TBC NSS Bhavana.doc

Instructions to Tenderers • 0.14 MB

KW1 Doc NSS Bhavana.doc

Tender Document • 0.21 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Karnataka

To Be Opened

Works

Electrical

Providing new Panel Board and rewiring with new fixtures for NSS Bhavan at Jnanabharathi Campus, Bangalore University, Bangalore

Bangalore University

Registrar Office Bangalore University | Bengaluru Urban, Karnataka

Amount: Refer DocsCloses: 6 Jul 2026Closed

Timeline

Published19 Jun 2026
Closed6 Jul 2026