Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹33.7 LAccepted-AOC | 1 | Accepted-AOC lowest tender | |
| 2 | 2₹34.6 L+₹85,196 (2.53%)Rejected-Finance MOURYA HEIGHTS SATAVNAGAR HANDEWADI ROAD HADAPSAR PUNE 28 | PUNE | MAHARASHTRA | 411028 | 2 | Rejected-Finance Quoted rate are high | |
| 3 | 3₹40.3 L+₹6.6 L (19.5%)Rejected-Finance 54 10 SHANTI NAGAR NEAR SHINDE CHATRI WANAVADI PUNE 411040 | PUNE | MAHARASHTRA | 411040 | 3 | Rejected-Finance Quoted rate are high |
Tender Value
₹49.8 L
EMD Value
₹99,600
Closing Date
23 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE South Pune
GE South Pune
SPECIAL REPAIR TO BLDG NOS. 31C, P-07 AND 08, PROVN OF 05 BATHROOM AND 05 TOILETS TO JCOS SINGLE LIVING ACCN AND OR PERSONNEL LINE WITH ALL MODERN SANITARY ANCILLARIES UNDER AGE B/R-III OF GE SOUTH PUNE
2023_MES_598249_1
8436/E8
Open Tender
Civil Works
Works
210 days
GE South Pune
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE South Pune
₹99,600
15 Jul 2023
25 May 2023
26 Jun 2023
25 May 2023
23 Jun 2023
9 Jun 2023
Amount
Dismantling stone slabs / tiles of any description or thickness laid bedded & pointed in cement mortar in floors, hard standing, apron etc complete all as specified and directed.
Dismanling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to MES store yard and rubbish off the premises, complete all as specified and directed.
Dismantling of single layer Mangalore pattern tiles or similar tiles in roofing etc, complete all as specified and directed.
Dismantling battens for tiles shingles etc of any size including tiling fillets exc 15 cm spacing etc , complete all as specified and directed.
Dismantling timber scantling in any position (unframed wok) exceeding 40 sqcm in section complete all as specified and directed.
Dismantling timber scantling unframed in post, rafters, purlins etc under 40 Sqcm in section complete all as specified
Taking down cement plaster from old brick / stone masonry walls etc. including racking out joints, hacking for keys and scrubbing down with water complete all as specified and directed.
S&F IInd class hard wood timber clean sawn as in scantling complete all as specified and directed.
S & F of plain fillet of 2nd class hard wood square, rectangular or triangular in section clean sawn secured with nails or brads sectional area exc. 13 but n. exc. 25 sqcm complete all as specified and directed.
M&L for decorated weather boarding 2nd class hardwood clean sawn, thickness 20mm to 25mm of approved design and rebated on thick edge to give 20mm laps and fixed to wooden/ steel member including taking down old unserviceable existing decorated weather boarding, complete all as specified and directed
Dismantling of walls/ceiling boards(fibre, pulp, insulation, etc) or insulation boards/ slabs / blankets, any thickness including cover fillets etc, complete all as specified and directed.
M&L for gypsum ceiling board for ceiling of approved pattern finish 595x595x9 to 9.5mm thick in size of approved brand / make with and including grid work of size 600x600mm, made out of 0.5mm thick GI tee 32x24mm for main, 25x24mm for cross tee and 20x20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle, hung from ceiling using 2mm thick GI suspension wires spaced at 1200mm on main runners including making niches for fans / light, complete all as specified and directed.
M&L for plaster of paris (POP) designer ceiling including frame work and allied items, including designed corners and sides of ceiling as approved by Engineer-in-Charge complete all as specified and directed.
S & F roof sheeting prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick, 150GSM of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.
S & F roof sheeting prepainted galvalume aluminium zinc coating GI based plain sheet 0.50mm thick, 150GSM of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F for rolled mild steel conforming to grade E-250 (Fe-410W, quality A) as in main and cross beams, hip and jack rafters, purlins, where connected to common rafters and running rails and guides for sliding doors, fixed with angle clips or other connecting plates, complete all as specified and directed
M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in coping including weathering and throating including necessary form work etc., complete all as specified and directed.
M&L for flush pointing to squared rubble masonry, coursed or uncoursed with CM 1:4, complete all as specified and directed.
S&F three track sliding window with two or more shutter with 4mm thick tinted glass one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engr-in-Charge. (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352.
S & F ventilators / louvers by using 4mm thick x 10cm wide froasted glass strips and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading etc all as directed :- (a) SP : 20048 (b) Glazing clips : 19352
M&L for resecuring, easing & adjusting without taking down shutter of any description exc. 1sqm and n. exc. 2 sqm each including fixing of necessary iron mongry / fittings complete all as specified and directed. Note :- One set of window of single / double /triple leaf and one door shutter of sinlge / double leaf shall be measured as one job.
Dismantling drain pipes of AC /CI / PVC of 75 to 110 mm dia, jointed in cement mortar or adhesive, complete all as specified & directed.
S&F 25mm bore ball brass valve, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed.
M & L for 300x600mmx5.5 to 6mm thick coloured glazed ceramic tiles in dado/skirting , laid and jointed in neat cement slurry and pointed in coloured cement to match complete laid over and including 10 mm thick CM (1:3) backing coat including triangular filleting on top in CM 1:4 complete all as specified and directed by Engineer-in-Charge.
M&L for Granite 18 to 20mm thick, machine cut (of any type) work (table rubbed and polished) in steps, kambs, pillars, window cills, cooking platforms and like laid over and including 10mm thick screed bed cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
M & L for machine cut cuddapa stone slabs one side polished 20 to 25mm thick set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 20mm screed bed in cement mortar (1:6), complete all as specified and directed.
Rounding edges of granite stone slab one edge, such as in steps, cooking platform and other similar situation complete all as specified and directed.
M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) 75mm thick laid in alternate bays including finishing the surfaces even and smooth using extra cement as in plinth protection, PCC path complete all as specified and directed.
Excavation in soft / disintegrated rock for post holes (or similar holes) each n.exc. 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth arround, in layers n. exc. 25 cm, watering, and removing surplus soil to a distance n. exc. 50m and making good disturbed surfaces, complete all as specified and directed.
Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in hard / dense soil complete all as specified and as directed.
Excavation in trenches not exc 1.5m wide and n.exc 1.5m in depth for foundations, and getting out in in hard/dense soil, complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm in soil, complete all as specified and directed.
Removing the excavated materials exceeding 50mtr but n.exc 250 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point, complete all as specified and directed.
Removing the excavated materials exceeding 250mtr but n.exc. 500 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point, complete all as specified and directed.
Demolition and breaking up RCC, SWG, CPVC drain pipes, 150mm bore, set in cement mortar and removing debris from the site complete all as directed by Engr-in-Charge.
M&L for concrete bed 1:4:8 type D-2 as in drain pipes including forming cradles, suitable for 150mm & 200 mm bore of pipe, complete all as specified and directed.
S&F 150mm bore RCC pipe, class NP-2 with socketed ends laid and jointed, complete all as specified and directed. Note :- Laying of sewage line in running sewage water & temporary diversion /plugged of existing sewage line & bailing out of sewage water is the responsibility of contractor and the rate for the same deemed to be included in unit quoted rate.
S&F 150mm bore RCC pipe, class NP-2 with socketed ends laid and jointed, complete all as specified and directed.
S&F 200mm bore RCC pipe, class NP-2 with socketed ends laid and jointed, complete all as specified and directed.
Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting outexisting benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as require for 150mm dia pipe complete all as specified and directed.
M&L for precast factory made manhole cover with frame of medium duty, of size Square / rectangular / circular area of each cover exc. 0.35 Sqm and n.exc. 0.75 Sqm, 75mm thick with SFRC concreting including groove and hook arrangement for lifting and placing in position and sides covered by MS sheet with necessary collars all as specified and directed
Demolition of reinforced cement concrete of any description and in any position (below or above ground level) complete all as specified and directed.
Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in cement concrete and making good disturbed ground complete all as specified and directed.
Removing of old water proofing treatment including screed bed and cleaning the surface of slab with wire brushes removing dust, foreign materials including flushing at junction of wall and removing the rubbish off the premises to a distance exc 500m complete all as directed by Engr-in-Charge
M&L water proofing treatment to RCC roof slabs, walls, chajjas etc shall be carried out with and including the following provisions and as directed by Engineer-in-Charge:- (a) M&L for 10mm thick plaster screed bed layer in CM 1:3 on concrete surfaces when concrete is green. (b) M&L for preparing plastered surfaces of roof slab, walls, chajjas etc by brooming with broom sweeping free from dust etc and evenly applying a coat of approved bituminous primer @ 0.70 Kg/Sqm of area, complete all as specified. (c) Supplying and laying 3mm thick APP polymer modified approved membrane non woven, polyster weighing not less than 3.60Kg/Sqm with laps and overlaps as specified and joints sealed and applied complete by torch application method all as specified and directed by Engineer-in-Charge. Carrying out test by flooding water for 24 hrs for leakage and seepage and rectifying the same to the entire satisfaction of Engr-in-charge. (d) Finally supplying & applying a coat of solar reflective bitumastic aluminium paint @0.15 lit / Sqm on the top of membrane surfaces complete all as specified and as directed by Engineer-in-Charge.
M&L for PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in surface channels and drain, complete all as specified and directed.
M&L for precast cement concrete 1:2:4, type B1 (Using 20 mm graded stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4. complete all as specified and as directed.
M&L for PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate, 25mm average thickness leveling course as in padding concrete complete all as specified and directed.
M&L for vitrified tiles double charged matt finished 10 mm thick Colour (square/rectangular) polished, area of each tiles exc 0.18 sqm but not exceeding 0.36 sqm, in floors etc. of light shade, set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 20mm thick screed bed in CM (1:6) etc complete all as specified and as directed.
M&L for Vitrified tiles 10 mm thick Colour (square / rectangular) polished, area of each tiles exceeding 0.36 sqm as in vertical surface as skirting etc. of light shade, set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 10mm thick cement plaster in cement mortar 1:4 as in backing coat and jointed in grey cement to match complete all as specified and directed.
M&L for coloured vitrified tiles full body matt finished of size 1200 x 600 x 10mm thick as in flooring, set and jointed in neat cement slurry and pointed in coloured cement to match with tiles, laid over and including 20mm thick screed bed in CM (1:4) complete all as specified and directed.
All as per item no. 51 above but in skirting with and including 10 mm thick CM (1:3) backing coat including triangular filleting on top in CM 1:4 complete all as specified and directed.
M&L for precast chequered cement concrete tiles 20cm x 20cm x 25mm thick,set, jointed and pointed in neat cement slurry in floors laid over and including 20mm thick screed bed in CM (1:6) complete all as specified and directed.
M&L for machine cut Kota stone flooring 20 to 25 mm thick laid, jointed with grey cement slurry and pointed with coloured cement to match the shade of kota stone as in floor, treads and risers etc including rubbing and mirror polishing with laid over and including screed bed 20mm thick in CM 1:4 complete all as specified and directed.
Demolition of brick work, solid block or stone masonry built in cement mortar or cement lime mortar complete all as specified and as directed.
M & L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified & directed.
M & L for brickwork with fly ash bricks, straight or curved on plan any radius, in half brick thickness wall built in CM (1:4) complete all as specified & directed.
M&L for rendering 15mm thick in CM (1:6) on stone masonry /brick /concrete surfaces finished even & smooth including dubbing out cement plaster of 15mm average thickness on stone masonry /brick / block walling including taking down raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. Note: Necessary precaution shall be taken to dubbing out plaster from stone wall.
M&L for rendering 15mm thick in CM (1:4) on brick / concrete surfaces using water proofing compound as per manufacturers instruction finished with sponge finish complete all as specified and directed. Note : Water proofing compound shall be measured and paid seperately
Supply only integral liquid water proofing compound complete all as specified and directed.
M&L for rendering 10mm thick in cement mortar (1:6) on stone masonry / brick / concrete surfaces finished even & smooth without using extra cement complete all as specified and as directed.
M&L for rendering 5mm thick in cement mortar (1:3) on ceiling surfaces finished even & smooth without using extra cement complete all as specified and as directed.
M&L for prepration of newly plaster surface area of wall and applying two coat oil bound distemper over a coat of alkali resistant primer over and including 2mm thick wall care putty, complete all as specified and as directed.
M&L for prepration of newly plaster surface of wall and applying two coat oil bound distemper over a coat of alkali resistant primer, complete all as specified and as directed.
M&L for prepration of newly plaster surface of ceiling and applying two coat oil bound distemper over a coat of alkali resistant primer, complete all as specified and as directed.
M&L for prepration of old plaster surface of wall and applying one coat oil bound distemper, complete all as specified and as directed.
M&L for one coat white wash on old surfaces of ceilings including preparation of old surfaces, complete as specified and directed.
M&L for preparation of new plastered & flush pointed surfaces and applying two coats of exterior emulsion paint over a coat of primer, complete all as specified and as directed.
M&L for 15 mm thick rendering in two layers, 10mm thick in CM 1:6 and 5mm thick in CM 1:4 on other than fair faces of brick/concrete surfaces including finishing the surfaces fair and smooth, mixed with water proofing compound, complete all as specified and directed. Note : Water proofing compound shall be measured and paid seperately.
Taking down chowkhats or frames wooden/steel with shutter (without taking off shutters from frames) exc 1.5 Sqm and not exc 4 Sqm each complete all as specified and as directed.
Taking down chowkhats or frames wooden/steel with shutter (without taking off shutters from frames) n. exc.1.5 Sqm each complete all as specified and as directed.
Taking down shutters of any description exc. 1 Sqm each and n. exc. 2 Sqm each, complete all as specified and directed.
M&L for applying two coats of synthetic enamel paint over a coat of pink primer on wooden surfaces exc 10 cm width or girth, including preparation of new wooden surfaces, complete al as specified and directed.
M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surface of any description exc. 10 cm width or girth, including preparation of new steel surfaces, complete all as specified and directed.
Supply and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) sections as in doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge complete all as specified and directed.
S&F powder coated aluminium frame for doors ((minimum thickness of powder coating 50 micron), windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F in repairs of 18/19mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, complete all as specified and directed.
S&F 25mm thick prelaminated particle board, exterior grade, prelaminated both sides with decorative choice laminations, fixed with screws to timber/ aluminium frame work, complete alll as specified and directed.
S&F 30mm thick flush shutters, solid core construction with block board core construction with block board core and plywood face panells commercial type on both faces including 6mm thick 1st class HW (Teak wood) beading all around on edges complete all as specified and directed.
M&L for teak wood lipping 6mm thick around 18/19mm veneered particle board, complete all as specified and directed.
S & F solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS tube, suppling and fixing in opening complete all as per specification and as directed by Engr-in-Charge
S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails .M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail ,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement and fixing in the frame as per manufacturers instructions and as directed by Engineer-in-Charge.
S&F in repairs 75mm dia, cast iron nahani trap with stainlss steel grating including jointing to waste pipe, fixed to cement concrete type B1 1:2:4, complete all as specified and directed.
S&F in repairs 100mm dia, cast iron nahani trap with stainlss steel grating including jointing to waste pipe, fixed to cement concrete type B1 1:2:4, complete all as specified and directed.
S&F in vitreous china wash down water closet pan, 'Pedestal' white, including fixing bolts etc including PVC seat cover white with flat bottom including MS, CP or aluminium anodised hinge devices including PVC low level flushing cistern 10 Ltr capacity with all internal fitting, inlet, outlet pipe connections etc. complete all as specified and directed.
S&F in repairs vitreous china, squatting pan, 'Orissa' pattern, size 580 x 440mm white, with integral foot rest with and including concrete bedding, PVC flushing cistern 10 Ltr capacity including all internal fitting, inlet, outlet pipe connections and 32mm thick PVC flush pipe for low level cistern etc. complete all as specified and directed.
S&F in repairs counter top basin of Size 610x415x160mm complete all as specified & directed. Make : Jaquar Product code DRS-WHT-37601 or equivalent model in Kohler as approved / Parryware
S&F bottle trap (with internal Partition) 32mm size with 250mm & 190mm Long wall connection pipes and wall flange complete all as specified & directed. Make : Jaquar Product code ALM-WHM-769L250x190 or equivalent model in Kohler / Parryware as approved.
S&F vitreous china urinals white full stall type ( excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinals against wall in cement mortar 1:2, securing urinals to plugs with and including 60 mm long brass screws pointing around urinal back in cement complete all as specified and as directed.
S&F vitreous china urinals white half stall type ( excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinals against wall in cement mortar 1:2, securing urinals to plugs with and including 60 mm long brass screws pointing around urinal back in cement complete all as specified and as directed.
S&F Hand Shower ( Health faucet) with 8mm dia, 1.2mtr flexible tube and wall hook with N.R.V. (back flow prevented) complete all as specified & directed. Make Jaquar Product code ALD-CHR-577or equivalent model in CERA as approved.
S&F brass chromium plated tubular towel rail 20 mm dia D type, 60 cm long between flanges complete all as specified and as directed.
S&F Soap dish, stainless steel, chromium plated, complete all as specified and directed. Make:- CAT part no. AHS-1131 Jaguar or equivalent of make cera / Hindware.
S&F 15 mm bore PVC connection 600 mm long with PTMT nut and PVC washer, complete all as specified and directed.
S&F 15 mm bore PVC connection 450 mm long with PTMT nut and PVC washer, complete all as specified and directed.
S & F in repairs PVC flexible waste pipe 40mm bore, complete all as directed.
S&F in repairs PVC low level flushing cistern 10 litres capacity make ISI or equivalent including all internal fitting in repairs, pair of brackets, including inlet/ outlet PVC pipe connections etc complete all as specified and directed.
S&F fancy type bib taps of cast copper alloys chromium plated with capstan heads screwed down screwed for iron pipe or for brass ferrule and fixed for 15mm dia pipe complete all as specified and as directed. Make:- CAT No ARI-CHR-39037 of "Jaquar" or Equivalent make as mentioned here-in-after.
S&F in repair 15 mm bore pillar taps, fancy type, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered "Hot or Cold" with long screwed shanks and fly nuts, screwed for iron pipe etc complete all as specified and directed.
S&F in repair 15 mm bore pillar taps, fancy type,Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe etc complete all as specified and directed.
S&F stop valve 15mm dia, cast copper alloy chromium plated screwed down high pressure with capstan head screwed both ends for iron pipe or for unions and fixed in repairs complete all as specified and as directed.
S&F CP 15mm bore concealed Stop valves, cast copper alloy, screwed down, high pressure, fancy type, chromium plated with long shank and cup (concealed type) with long neck complete all as specified and as directed.
S & F in repair angle cock, 15mm bore brass chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.
S&F in repairs Two way Bib taps CP 15mm borefancy type conforming to CAT No. ARI-CHR-39041 of "Jaquar" or Equivalent make, complete all as specified and directed.
S&F shower rose bass chromium plated 125 mm dia with swivel joints type, screwed for 15mm bore including jointing to pipe or unions complete all as specifed and directed. Make:- CAT No OHS-489 of "Jaquar" or Equivalent make as mentioned here-in-after.
S&F looking mirror of size 600 x 450mm approved quality and make, mounted on 6 mm thick plywood commercial as backing and aluminium powder coated frame all around on edges all as specified and as directed.
S&F high density 50mm bore polythylene pipes (HDPE) of pressure rating 6 kg/cm2 laid under floors with necessary socket, elbo & bend etc complete fixed to wall or in floors etc complete all as specified and directed.
S&F aluminium powder coated fancy type curtain rod 20mm bore (Medium weight) complete all as specified & directed.
S & F aluminium powder coated brackets suitable for 20mm dia curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc complete all as specified and directed.
S&F 100mm size powder coated butt hinges, heavy weight, cold rolled mild steel, and fixed complete all as specified and as directed.
S&F 100mm size stainless steel butt hinges, medium weight, complete all as specified and as directed.
S&F aluminium anodised barrel tower bolts of extruded section 150 mm long complete all as specified & directed.
S&F aluminium powder coated barrel tower bolts of extruded section 200 mm long complete all as specified & directed.
S&F aluminium handles, powder coated, fabricated type, of size 150 mm complete all as specified & directed.
S&F 300mm length of bolt, aluminium alloy, anodised, sliding door bolts with hasp staple (bolt type) anf fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast alluminium alloy, complete all as specified and directed.
S&F aluminium handles, anodised, cast type, of size 150mm complete all as specified and directed.
S&F 75mm size extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.
S&F floor door stopper, over all length of cover plate 150 mm of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in door, complete all as specified and directed.
S&F continuous (piano) hinges, mild steel, bright finish, width of flaps (When open) 30mm, complete all as specified and directed.
M&L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade glossy finish with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and as directed
Dismantling of plain or corrugated steel sheeting any gauge / thickness in roof covering etc, complete all as specified and directed.
M&L for Non skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20mm thick screed bed in CM (1:6), complete all as specified & directed.
M&L for coloured glazed ceramic tiles as in vertical surface 300x450x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including 10mm thick plaster in CM 1:4 and including triangular filleting on top in CM 1:4, complete all as spd and as directed.
M & L for 300x600mmx5.5 to 6mm thick coloured glazed ceramic tiles in dado/skirting , laid and jointed in neat cement slurry and pointed in coloured cement to match complete over and including 10 mm thick CM (1:3) backing coat including triangular filleting on top in CM 1:4 complete all as specified and directed by Engineer-in-Charge.
S&F for GI tubing 15mm dia medium grade with all fittings & fixtures, fixed to walls & ceiling or laid in floors complete all as specified and as directed
S&F for GI tubing 20mm dia medium grade with all fittings & fixtures, fixed to walls & ceiling or laid in floors complete all as specified and as directed
S&F for GI tubing 25mm dia medium grade with all fittings & fixtures, fixed to walls & ceiling or laid in floors complete all as specified and as directed
Taking up or down steel water tubing and connections including cleaning for refixing or removal to store complete all as specified and directed for following size of pipe :- (a). 15mm dia bore.
(b). 25mm dia bore.
M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10cm and n exc 20cm girth, complete all as specified and directed.
Excavation in trenches n. exc 1.5 m wide and n. exc 1.5 mtr depth n exc 10 sqm on plan and getting out in hard / dense soil complete all as specified and as directed.
M&L for 75mm thick PCC 1:4:8 type D2 using (40 mm graded stone aggregate) as in sub-base / flooring, complete all as specified and as directed.
M&L for PCC 1:4:8 type D2 using (40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.
M&L for RCC M25 as in foundations, including / rafts, footings, foundation . beams; plinth beams; bases for colunllls, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.
M&L for RCC M25 as in columns, pillars, piers, posts and struts complete all as specified and as directed.
M&L for RCC M25 as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.
M&L for RCC M25 as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
M&L for RCC M25 as in Chajjas complete all as specified and as directed.
M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter form work in footing, rough finish surfaces, complete all as specified and as directed.
M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions, fair finish surfaces, complete all as specified and as directed.
M&L for formwork fair finish surfaces to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, verhangs, etc. also splays between floors and beams, etc. complete all as specified and directed.
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), fair finished surfaces, complete all as specified and directed.
M&L for formwork to chullah hoods, chajjas, troughs and similar items including edges, fair finished surfaces complete all as specified and directed.
M&L for hardcore of broken stone or boulders of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface, complete all as specified and directed.
Cutting holes into or through stone wall built in cement mortar, superficial area exc. 150 Sq. cm but n. exc. 400 Sq. cm and making good the dismantled portion in CM 1:3 or cement concrete 1:2:4 type B-1 as required, complete all as specified and directed.
Supply and fixing mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. and similar work conforming to Fe 290 Gde E-165, complete all as specified and directed.
M&L for providing and fixing stainless steel (Grade 304) railing,corner guards made of angles, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts/screws etc., of required size, on junctions of Wall etc, with suitable arrangement complete all as specified & as directed.
S&F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall or laid in floors / in earth of 110 mm dia including necessary fittings complete all as specified and directed
S&F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall or laid in floors / in earth of 75 mm dia including necessary fittings complete all as specified and directed
S&F in repairs PVC (SWR) pipes 160mm bore 0.4 Mpa (4.0Kg/cmSq), single socketed in any length with rubber ring joints fixed to wall / ceiling or laid in trenches, complete all as specified and directed.
Supply and fixing PVC vent cowl 110mm dia complete all as specified and as directed.
Supply and fixing PVC vent cowl 75mm dia complete all as specified and as directed.
S&F 110 mm bore PVC (SWR) bends, any radius, complete all as specified and directed.
S&F 75 mm bore PVC (SWR) bends, any radius, complete all as specified and directed.
S&F in repair cast iron work grade FG 150, un-machined as in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops,parts of ranges, balusters and similar articles, complete all as specified and directed.
S&F 75 to 100 mm dia stainless steel grating complete all as specified and directed.
S&F grating round 140 mm size of PTMT (Minimum weight 50gms) complete all as specified and as directed.
S&F in repairs PVC gully traps, square 125/110mm size with grating including jointing to waste pipe in cement joint, dia of outlet 100mm complete all as specified and directed.
Supply and fixing rotational moulded polyethylene water storage tank 1000 Litres capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I, three layered including with brass tank nipple of suitable size & dia, 25 mm ball valve high pressure PTMT with rod & high density plastic ball complete all as specified and directed.
Supply and fixing gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed for size 20mm dia, complete all as specified and directed.
Supply and fixing gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed for size 25mm dia, complete all as specified and directed.
Dismantling structural steel work including doors, gates , framed truss etc. complete and refixing in the same opening after adjusting or easing including replacing pintle hinges, locking devices etc and applying one coat of synthetic enamel painting complete all as specified and directed.
M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
M&L for Mild steel TMT bars 6 to 8mm dia as in stirrups, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
M&L for complete removal of existing treatmen of old plaster surface area of wall and applying two coat oil bound distemper over a coat of alkali resistant primer with and including 2mm thick wall care putty, complete all as specified and as directed.
M & L for preparation of new surface of wall apply two coats of Apex (Exterior emulsion paint) over one coat of primer on wall complete all as specified & directed by Engineer-in-Charge.
M&L for prepration of old steel surface and apply one coat of synthethic enamel paint, exc. 10 cm width or girth, complete all as specified and directed.
M&L for prepration of old steel surface and apply one coat of synthethic enamel paint, n. exc. 10 cm width or girth, complete all as specified and directed.
Taking down point wiring( light, fan, socket or power) any type complete, including fixtures and fittings such as switches, ceiling roses, pendants,regulators sockets, loght fitting etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.complete all as specified and directed.
Taking down old unserviceable / worn out aluminium sub main of any type and size, complete all as specified and directed.
Taking down old unserviceable /worn out DB,s any type and size, complete all as specified and directed.
M & L for Point wiring with colour coding as per IS, with multistranded copper conductor 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLS- Cable conforming to IS: 694-1990 PVC insulated, unsheathed copper conductor cable Make:- Finolex/polycab/ Havell's drawn through in and including heavy duty PVC concealed conduit of white/ ivory colour including all accessories after cutting chasing in wall of any type /ceiling etc, incl making good of disturbed surface and finish with two coats of white / colour washing / distempering etc to match the existing surface complete etc heavy duty ISI marked, with GI sunken boxes with earth dolly duly, covered with modular white cover plate with frame suitable for modular switches of Make- Legrand or equivalent Honeywell / Phillips including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly etc complete all as specified and directed for the following :- (a) One light/fan point controlled by one switch and regulator
(b) Switch Socket outlet, three pin, 5 Amp, independent
(c) One switch socket outlet, three pin 5 amps on the same board
(d) Bell / buzzer point controlled by one bell push.
Description all as per item No. 173 above but using 2.5 sq mm single core copper conductor FRLS cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm PVC insulated copper conductor FRLS cable as earth continuity conductor along with wiring and connecting to the common eath dolly etc complete all as specified and directed.
S & F modular switch 6A, one way 1 module, complete all as specified and directed.
S & F modular switch 16A, SP one way 1 module, complete all as specified and directed.
S & F modular sockets 6A, 2/3 pin universal combine 2 module, complete all as specified and directed.
S & F modular sockets 6/16A, 2/3 pin combine 2 module, complete all as specified and directed.
S & F switch piano single pole flush type 5/6 Amps, 240 volt one way, complete all as specified and directed.
S & F switch socket combination 2 in 1 , 5/6 amps flush type, complete all as specified and directed.
S & F switch socket combination 3 pin, 5/16 amps 5 in 1 flush type, complete all as specified and directed.
S & F switch bell push button type 6 Amp single pole, 1 module, complete all as specified and as directed.
S & F electric bell AC 230V single pole DING DONG type complete all as specified and as directed. Make :- Anchor / havells /Philips
Supply and fixing FREEDOM NEO LED street light luminaries with pressure die cast housing with toughened glass with high power LEDs and unique peanut lens deep drawn aluminium housing anodised inside and acrylic cover complete with 36 Watt in built control gear including twin core copper conductor for connection of security light fitting from ceiling rose and security light bracket made out of 25 mm dia GI pipe light grade, 0.90 mtr long bend to shape 130 degree angle fixed to wall with and including two nos. MS clamp made out of flat iron size 40 x 5 mm with nut bolts and washer complete all as directed by Engr in Charge. Make:- CROMPTON cat no- LSTS-36-CDL-M OR equivalent in Wipro/BAJAJ.
M&L for taking down ceiling fans of any size, removing to workshop for servicing, cleaning, lubricating, replacement of split pin, rubber bush and other spare required for smooth functioning of fan including fixing PVC cable with stranded copper conductor of size 0.75 Sqmm and refixing the fan at the same locations, complete all as directed by Engr-in-charge.
Supply and Fix in replacement canopy suitable for ceiling fans, complete all as specified and directed.
S&F in replacement MS clamp with rubber reel, nuts, bolts, split pin etc suitable for 1200/1400 mm swwep ceiling fan, complete all as directed by Engr-in-charge.
Supply and fix modular step fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply, complete all as specified and directed.
S&F ceiling rose, 3 terminals, polycarbonate, isolated body, complete all as specified and directed.
M & L for Sub main wiring complete with two single core 4 sqmm ,1100 volts grade, PVC insulated, stranded copper conductor cable with continuous copper earth conductor of 4 sqmm in and including caping casing including cutting chases, pinning in. making good to facings where required complete all as directed by Engineer-in-Charge. Note: (i) Cost of caping casing and accessories shall be deemed to be included in quoted rates. (ii) Two runs of 4 sqmm cable and one run of 4.0 sqmm cable of earth continuity conductor and one run of caping casing shall be measured as one unit length.
M & L for Sub main wiring complete with two single core 6 sqmm,1100 volts grade, PVC insulated, stranded copper conductor cable with continuous copper earth conductor of 6 sqmm with and including caping casing including cutting chases, pinning in and making good to facings where required, complete all as specified directed by Engineer-in-Charge. Note: (i) Cost of caping casing and accessories shall be deemed to be included in quoted rates. (ii) Two runs of 6 sqmm cable and one run of 6.0 sqmm cable of earth continuity conductor and one run of caping casing shall be measured as one unit length.
M & L for Sub main wiring complete with four single core 10 sqmm ,1100 volts grade, PVC insulated, stranded copper conductor cable with continuous copper earth conductor of 10 sqmm in and including caping casing including cutting chases, pinning in making good to facings where required, complete all as specified directed by Engineer-in-Charge. Note: (i) Cost of caping casing and accessories shall be deemed to be included in quoted rates. (ii) Four runs of 10 sqmm cable and one run of 10.0 sqmm cable of earth continuity conductor and one run of caping casing shall be measured as one unit length.
S&F IP-43, IK 09, protection metal double door Vertical TPN -DB rated busbar, 415 volts, 50 HZ complete with interconnection links, blanking plates, cable ties, identification labels TPN 4 way, 12 modules suitable for accommodating 100 Amps MCCB 4 pole as incomer and SP/TP MCB as out going and concealed in wall including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing Make - Legrand / ABB/L&T. Note- MCCB 100 Amps 4 pole 25 KA as incomer will be measured seprately in relevant item, complete all as specified and directed
S&F MCB DB 12 way, double door, with 200 amp rated busbar 240 V, SPN recess mounted / wall mounted complete all as directed and specified.
S&F MCB DB 8 way, double door, with 200 amp rated busbar 240 V, SPN recess mounted / wall mounted, complete all as specified and directed.
S&F MCB DB 4 way double door with 200 amp rated busbar, 240V SPN recess mounted / wall mounted, complete all as specified directed.
S&F MCB SP 6-32 Amps, 10KA, 'C' series, complete all as specified directed.
S&F MCB SPN 10-40 amps,10KA, 240V,'C' series, complete all as specified directed.
S&F in replacement MCB TPN 63 Amps ,10KA, 415V, 'C' series, complete all as specified and as directed.
M & L for earthing with galvanised steel earth plate electrode 600 x 600 x 6.0 mm buried directly in ground earth pit not less than 2.25 m deep below normal ground level, with top edge of the plate vertically to a depth of not less than 1.5 m below ground level connected to and incl GI wire 4 mm dia and GI pipe 15 mm dia light grade for protection to the extent of 7.5 m as earthing lead by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 3 of SSR Pt-I incl RCC cover, watering arrangement with GI pipe 20 mm dia and MS funnel, concrete pit incl excavation and earth work in any type of soil and testing on completion etc complete all as specified and directed by Engr-in-Charge.
M & L for earthing complete with galvanised steel earth plate electrode '60cm × 60cm × 6mm thick, buried 'directly in ground (earth pit not less 'than 2.25 metres deep below normal ground 'level) with top edge of the plate not 'less than 1.5 metres below normal ground level', connected to 'galvanised iron strip 32x6mm by means of bolts, nuts, check 'nuts and washers of galvanised iron or steel earth strip protected by provision of GI 'medium grade' pipe 40mm bore including provision of concrete pit in PCC (1:2:4) type B1 (using 20mm graded stone aggregate) with 40mm thick cover in RCC (1:2:4) type B-1 reinforced with XPM (weight not less than 4 kg/sqm) and frame made out in MS angle iron of size 25x25x3mm with lugs 02 Nos and with MS handle made in 6mm dia round bar made to shape, including GI 'medium grade' 20mm bore pipe for watering, perforated at bottom 1.75m long placed on top edge of earth plate including provision of mixture of charcoal dust & common salt packed up to minimum 150 mm all around the earth plate, test point made out of phosphorus bronze with fixing arrangement ,funnel, wire mesh and earth work in hard/dense soil returning filling in and removal of surplus soil to a distance not exceeding 50mtr all as shown in electrical plate No. 3 of SSR Part I 2009 connected to earthing test point all as specified or indicated 'including testing on completion. NOTE:-GI strip 32x6mm and GI pipe 40mm bore medium grade required for encasing GI strip upto 7.50m length per earthing shall be deemed to be included in unit quoted rate.
M & L for 4mm dia GI wire as in earth continuity conductor or main earth lead fixed to wall or buried in ground or drawn in GI pipe, complete all as specified and directed.
M&L for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc as required for 32x6 galvanized iron strip, complete all as specified and directed.
S&F LED luminaire recess mounting LED luminaries 12 wattage round shape with white powder coated CRCA housing with LEDs fixed to housing complete lighting as per site requirement, complete all as specified and directed. Make:- Conforming to Cat Part No.LED RECESS Panel round 12W+4W of BENLO or of equivalent in WIPRO/BAJAJ
Supply and fixing LED light fitting, 1X20 Watt surface mounted LED high efficiency LED luminare smart bright ingress protection : IP66 with acrylic cover comprises pre-wired with high efficiency electronic driver,high trnslucent frosted diffuser gets glare free, smooth light distribution, complete all as specified and directed. Make:- Philips cat no-BN021C LED20S PSU NW GR OR equivalent in Wipro/Bajaj.
Supply and fixing Integral LED security Light Luminaire 35 watt comprising of epoxy powder coated aluminium housing, enclosed with glass cover in frame with GI pipe of suitable dia and length, suitable for fixing the same on wall complete with accessories, complete all as specified and directed. Make:- Philips / WIPRO/ BAJAJ
Supply and fixing Integral LED security Light Luminaire 20 W comprising of epoxy powder coated aluminium housing, enclosed with glass cover in frame incuding with GI pipe of suitable length & dia, medium grade including with fitting and fixtures on wall complete with all accessories conforming to Cat Part No : BRP022 LED 20 CW MR S1 PSU GR of philips or of equivalent in WIPRO/BAJAJ, complete all as specified and directed.
S&F MCCB 100 Amps, 25 KA, 4 Pole, 415V, thermal magnetic type of Legrand or equivalent make in L&T / ABB, complete all as specified and directed.
S&F MCCB 63 Amps, 16 KA, 4 Pole, 415V, thermal magnetic type of Legrand or equivalent make in L&T / ABB, complete all as specified and directed.
Supply and fix in repairs LED mirror light fittings wall mounted type suitable for 1x10 watt with high output diffuser and all fixing arangements Cat Part No BN021 LED 10S-6500 PSU GRS1 of Philips or equivalant to Bajaj / Havells, complete all as specified and directed.
S&F lamp holder (Angle / bracket) insulated body, with back plate, complete all as specified and directed.
Supply and fix new exhaust fan AC single phase 230/ 240 volts heavy duty steel body of size 300 mm sweep, 1400 rpm, with louvers and connection with twin core copper wire complete, all as specified and directed. Make:- BAJAJ cat no- 70046 300 MM SWEEP OR equivalent in Wipro/Havells.
S&F plastic exhaust fan, noise free, AC single phase 230/ 240 volts of size 250 mm sweep, RPM 1350 including all fixing arrangements complete all as specified and directed. Make:- Bajaj cat no-70049 or equivalent in philips/ Havells
S&F water heater storage type, electric supply and installed complete of capacity 25 litres including taking down of old unserviceable geysers and deposited the same in MES store yard, complete all as specified and directed. Make:- Bajaj & equivalent in Philips/Havells.
Supply, laying, testing and commissionnig of UG LT cables 1100 volts grade, XLPE insulated and PVC sheathed, armoured, with multi stranded aluminum conductor, heavy duty conforming to IS - 1554 part-I, including cable glands, crimpimg type cable lugs in LT panel/MCCB in bldg etc to suit the cable laid in trenches /fixed to poles /drawn through pipes of sizes 25 Sqmm 2 core, complete all as specified and directed.
Gauri Associates
M/s.BAJRANG CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .