Construction of 01 no. Art and Craft Room at Govt High School Goyee Zone Gool Distt Ramban

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, depth upto 1.5mtr. including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth is to be levelled and neatly dressed in:All kinds of soil (including all carriages lead and lift if any)

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.1:4:8 (1 cement: 4 fine sand : 8 graded stone aggregate 40mm nominal size) (including all carriages lead and lift if any)

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) Crushed with 20% boulders (including all carriages lead and lift if any)

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centenng. shuttering, finishing and reinforcement-All work upto plinth level. 1.1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) (including all carriages lead and lift if any)

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.Thermo-Mechanically Treated bars. (including all carriages lead and lift if any)

Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 in foundation and plinth in Cement mortar 1:6 ( 1 cement : 6 fine sand) (including all carriages lead and lift if any)

Extra for brick work in superstructure above plinth level upto floor V level. (By manual means) (including all carriages lead and lift if any)

Centring and shuttermg including strutting, propping etc. and removal of form for Foundations: footings, bases of columns etc. for mass concrete. (including all carriages lead and lift if any)

Centering and shuttermg including strutting, propping etc. and removal of form for·Lintels, beams, plinth beams, girders, bressumers and centilevers. (including all carriages lead and lift if any)

Steel work welded in built up section/framed works including cutting,hoising,fixing in position and applying a primer coat of approved steel primer using structural steel primer as required for doors and windows frames. (including all carriages lead and lift if any)

15mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) (including all carriages lead and lift if any)

Providing and fixing 35mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI arked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,al! complete as per direction of Engineer- in charge.Second class kail wood (including all carriages lead and lift if any)

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening forpanel inserts excluding portion inside grooves or rebatesto be measured). Panelling for panelled or panelled andglazed shutters towards the cost 4mm thick glass panes.Extra on item no-11) towards the cost 4mm thick glass panes. (including all carriages lead and lift if any)

Cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand .: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 50 mmthick with 20mm nominal size stone aggregate. Crushed. (including all carriages lead and lift if any)

Providing and fixing glass strips in joints of terrazo, cement concrete floor.40 mm wide and 4 mm thick200 rm (LS) (including all carriages lead and lift if any)

Painting with synthetic enamel paint of approved brandand manufacture to give an even shade. Two or more coats on new work including primer (including all carriages lead and lift if any)

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete. (including all carriages lead and lift if any)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shadeNew work (two or more coats) over and ineluding priming coat with cement primer (including all carriages lead and lift if any)

Finishing walls with water proofing cement paint of required shade New work (two or more coats) applied @3.84 kg/1O sqm (including all carriages lead and lift if any)

Making plinth protection 50mm thick with cement concrete ( 1 : 3 : 6) 1 cement : 3 Coarse sand: 6 stone aggregate) 20 mm nominal size of stone aggregate over 75 mm bed of dry brick allast , 40 mm nominal size of well rammed and consolidated and grouted crushed (including all carriages lead and lift if any)

Strctural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (including all carriages lead and lift if any)

Providing and fixing hard board ceiling, sheet of approved quality with necessary nails etc. complete (frame work to be paid for separately) Standard Quality board 6mm thick (including all carriages lead and lift if any)

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, boltsand nuts 8mm diameter with bitumen and G. I limpet washers or with G. I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape whereever required.0.63mm thick with zinc coating not less than 27 5gm/m2 (including all carriages lead and lift if any)

Providing wood work in frames of false ceiling, partitionsetc. sawn and fixed in position 2nd class kail wood (including all carriages lead and lift if any)

Providing ridges or hips of width 60cm overall width plain G.S.sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G. I. limpet and bitumen washers complete.0.63mm thick with zinc coating not less than 275gm/m2 75 rft or 22.86 rm (including all carriages lead and lift if any)

Electric wiring with 1.5 sqmm copper cable including 20 mm dia 2mm thick PVC pipe 5amp with sunken box and connection to the main pole complete as directed by engineer-incharge. (including all carriages lead and lift if any)

Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :200x10 mm (including all carriages lead and lift if any)

Providing and fixing aluminium handles lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.125 mm (including all carriages lead and lift if any)

Providing and fixing lSI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete 300x16 mm (including all carriages lead and lift if any)

MOHAMMAD IMRAN BHAT

Mohd Azam

FEROZ DIN TRAGWAL

Kallian Singh