Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.0 LAccepted-AOC | L1 | Accepted-AOC AOC | |
| 2 | L2₹30.0 L+₹2.0 L (7.24%)Rejected-Finance 93 SARASWATI PURAM COLONY SG PGI LUCKNOW UP 226 014 | LUCKNOW | LUCKNOW | UP | 226014 | L2 | Rejected-Finance Being Higher Bidder | |
| 3 | L3₹31.2 L+₹3.2 L (11.6%)Rejected-Finance | L3 | Rejected-Finance Being Higher Bidder | |
| 4 | L4₹34.6 L+₹6.6 L (23.8%)Rejected-Finance 70 SUBHASH ROAD HARJINDER NAGAR KANPUR 208007 | KANPUR | KANPUR | UTTAR PRADESH | 208007 | L4 | Rejected-Finance Being Higher Bidder |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
24 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE E/M Lucknow
Garrison Engineer E/M, 36 LBS Marg, Lucknow Cantt, Lucknow (U.P.) PIN 226002
PROVN OF 02 X TOILET AND BATHROOM BLOCKS WITH ALLIED WORKS BEHIND ORTHO WARD-I, III AND JRC (TOTAL 24 TOILETS AND BATHROOMS) AND PATIENT WAITING ROOM HALL AT UROLOGY DEPT IN THE AREA OF AGE E/M (HOSP) UNDER GE E/M LUCKNOW
2022_MES_554701_1
GE/EM/LKO/HOSP/T-43 OF 2022-2023
Open Tender
Miscellaneous Works
Item Rate
180 days
Lucknow
As per NIT
8 documents required · 8 mandatory
₹500
GE E/M Lucknow
₹70,000
Yes
6 Dec 2022
27 Sept 2022
26 Oct 2022
27 Sept 2022
24 Oct 2022
12 Oct 2022
Amount
M&L for Excavation in trenches n exc 1.5 m wide and n exc 1.5 m in depth beyond ; for foundation, etc. or for shafts, wells , cesspits, manholes, pier holes etc n exc 10 sqm on plan and not 1.5 m depth and getting out complete all as specified and directed.
M&L for Plain cement concrete 1:4:8, Type D-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.
M&L for brick work with fly ash bricks as per IS 12894 -2002 straight or curved on plan exc 6 m mean radius built in cement mortar 1:6, complete all as specified and directed.
Moorum/red bajri/earth filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering, complete all as specified and directed.
M&L for hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.
M&L for 100 mm thick plain cement concrete type B- 2, 1:4:8 (40mm graded aggregate) as in floor/sub base and finishing the surface fair and even complete all as specified and directed.
M&L for 25 mm thick plain cement concrete 1:2:4, Type B0 (using 12.5mm graded stone aggregate) as in Damp proof course to horizontal or vertical surfaces including necessary formwork complete all as specified and directed.
Supply only Integral water proofing compound, complete all as specified and directed.
M&L for rendering 15 mm thick in cm 1:4 on faces of brick or concrete surfaces and finishing even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15 mm thick in cm 1:6 on faces of brick or concrete surfaces and finishing even and smooth without using extra cement complete all as specified and directed.
M&L for 5 mm thick rendering cement plaster in CM 1:3 on concrete surfaces on such as sides of froof beam, soffits of roof slab etc finished fair & smooth w/o using extra cement, complete all as specified and directed.
M&L for preparation of newly plastered surfaces and applying two coats of oil bound distemper over one coat of oil base primer all as specified on wall surfaces over and including a coat of 3 mm wall care putty, complete all as specified and directed.
M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.
M&L for preparation of newly plastered surfaces and apply three coats of white wash on wall surfaces complete all as specified and directed.
M&L for preparation of newly plastered surfaces and apply two coats of cement base paint over a coat of cement base primer on wall surfaces complete all as specified and directed.
M&L for providing reinforced cement concrete, type B1 1:2:4 (20 mm graded aggregate) as in lintels upto 1.5 m clear span, cills, steps ; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided complete all as specified and directed.
M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified and directed.
M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
Use and waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work flat rough surface vertical or to batter complete all as specified and directed.
Use and waste formwork to sides of pillars, posts, struts, piers, columns and stanchions of rectangular flat rough surface columns etc complete all as specified and directed.
Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) flat rough surface complete all as specified and directed.
Use and waste form work to sides and soffits of floor or roof beam, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup ports, overhangs, etc. also splays between floors and beams flat rough surface etc complete all as specified and directed.
M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
M&L for TMT bars 5 mm dia and upto and incl 10 mm in stirrups, spacer and binder complete all as specified and directed.
S&F Vitreous China bowl urinals, flat back, size of 465 x 355 x 265 mm minimum with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe, complete all as specified and directed. (Note:-Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)
S&F vitreous china squatting pan, "Orissa pattern, size 580 x 440 mm white, with integral foot rest (excludidng flushing cistern and flush pipe) complete all as specified and directed.
S&F for European water closed (casecade typ) single piece with complete fittings fixing arrangement complete all as specified and directed.
S&F angle valve two way cast copper alloy, fancy type, chromium plated with cup (concealed type)(bore of pipe 15 mm) complete all as specified and directed.
S&F for health faucet with chromium plated flexible pipe(length of pipe 1m min) complete all as specified and directed.
S&F 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.
S&F solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall becovered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.
S&F 125 mm aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F 100 mm butt hinges, heavy weight, cold rolled mild steel, and fixed complete all as specified and directed.
S&F 125 mm aluminium anodised handle, cast type, anodised, fixed complete all as specified and directed.
S&F 15 mm bore GI tubes , medium grade, with and including all fitting; laid in trenches or fixed to wall complete all as specified and directed.
S&F 20 mm bore GI tubes , medium grade, with and including all fitting; laid in trenches or fixed to wall complete all as specified and directed.
S&F 15 mm bore Stop valves, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specifeid and directed.
S&F 15 mm bore Bib taps, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specifeid and directed.
S&F 15 mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'HOT or 'COLD with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.
S&F vitreous (flat back or angle back type) china wash basin, white, any size, including cutting for pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed.
S&F PVC down waste pipe 32mm dia for wash hand basin complete all as specified and directed.
S&F PVC connections 15 mm size with PTMT nuts of length 600 mm long complete all as specified and directed.
S&F 110 mm bore PVC (SWR) pipes single socketed, in any length withs rubber ring joints, laid in trenches or floors complete all as specified and directed.
S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.
S&F 110 mm bore PVC (SWR) 'T' junction (single 'T') equal or unequal complete all as specified and directed.
S&F 110 mm bore PVC (SWR) Vent cowl complete all as specified and directed.
S&F 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.
S&F 75 mm bore PVC (SWR) pipes single socketed, in any length withs rubber ring joints, laid in trenches or floors complete all as specified and directed.
S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed.
Cutting into existing manholes for connecting new drains, 100 mm bore, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 raound or 3/4 section ) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required, complete all as specified and directed.
M&L for 15 mm thick Screed Bed or bedding layer of mortar for laying floor finishes in CM 1:4 complete all as specified and directed.
M&L for Non skid joint free coloured ceramic tiles 7 to 8 mm thick (Square / rectangular) area of each tile exceeding 0.06 sqm and not exc 0.11 sqm, in foor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.
M&L for Glazed eramic tiles in vertical surface 300 x 200 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to matach the shade of tiles complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.
Removing excavated mtrl from site n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point, complete all as specified and directed.
S&F steel windows with side hungs shutter including projecting type hinges with steel handle and steel peg stay complete with glazing bar, dove tailed or welded complete all as specified and directed.
S&F steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and directed.
M&L for Sand filling under floor or in foundation including watering and consolidation etc, complete all as specified and directed.
S&F Rotational moulded polyethylene water storage tank three layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt I. capacity of tank 500 litres complete all as specified and directed.
S&F Ball brass valves, high pressure, with polythene float & steel rod & fly nut complete, screwed for iron pipe or brass ferrule and fixed 20 mm bore pipe or brass ferrule and fixed, complete all as specified and directed.
S&F for 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exe 0.5 sqm, complete all as specified and directed.
M&L for Machine pressed precast concrete interlocking paver block ISI Marked any shape any size confriming to IS 15658-2006 of 60 mm thickness , M-25 Grase with grey cement and pigment complete all as specified and directed.
M&L for non skid ceramic tiles of 7-8 mm (square or rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer of cement mortar 1:4, complete all as specified and directed.
M&L for rendering 10 mm thick on brick work/ concrete surfaces in cement mortar 1:6 on fair faces finished fair & even, complete all as specified and directed.
M&L for 15 mm thick rendering in CM 1:4 on fair faces of brick work surface finished even and fair without using extra cement with WPC not less than @ 3% of weight of cement or as per manufacturer instruction, complete all as specified and directed. (Note : Integral WPC shall be measured and paid seprately )
M&L for applying two coats of exterior emulsion(weather coat of approved quality)/Apex paint over a coat primer on wall sufaces.Incl a coat of 2mm thick wall care putty over newly plastered surfaces including preparation complete all as specified and directed.
M&L for preparing new steel steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L plain cement concrete type B1 ( 1:2:4) using 20 mm graded stone aggregate as in lintels upto 1.5m clear span, cills,steps; seismic and other similar band, copings, covings bed plates, and like including weathering slightly rounded or chamfered angles, complete all as specified and directed.
S & F for powder coated aluminium extruded sections (conforming to IS) (minimum thickness of powder coating 50 micron) three track sliding window shutter with frames comprising series-C (20mm) , duly fitted with neoprene beading, glazing clipss, locking devices, heat absorbing glass 3.5mm thickness (in 2 shutters) and with SS wire cloth of 0.46mm nominal dia of wire and average width of aperature 1.4mm (in one shutter) complete all as specified and directed.
S&F Powder coated Aluminium sections ( conforming to IS) door frames with double leaf shutters complete duly fitted with neosprene rubber beading,heat absorbing glass panes 4.8 mm nominal thickness at top portion and 3mm thick ACP sheet at bottom panel, Alu anodised with rubber shoe floor door stoppers- 2 Nos , jointing cleats, hinges, 3Nos in each shutter, door closer, handle 2 Nos in each shutter, Aluminium tower 1 Nos in each shutter and necessary locking arrangement with mortice lock with duplicate key complete all as specified and directed.
M & L for 25mm plain thick cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in floor and finishing the surface fair, even and rough, complete all as specified and directed.
S&F Providing and fixing of E-board 'Everest' make 600x600x4mm thick white prelaminated seif embosed reinforced designer ceiling board tiles of approved texture at all height laid on Hot dipped Galvanised iron imposed grid with 24 mm wide T-section/Angle section, complete all as specified and directed.
M&L 75mm thick cement concrete 1:3:6 type C2 (using 40mm grades stone aggregate) as plinth protection with and including joint filling mix with sand & bitumen 1:3 complete all as specified and directed.
M&L for point wiring complete for one light point or one fan point controlled by one, one way 5 Amp switch with PVC(FRLS)insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including not less than 20mm dia 'medium grade' PVC concealed conduits ISI marked and fittings, including pressed steel concealed terminal switch boxes not less than 1.6mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC (FRLS) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed.
All as per Item No 77 above but for one 5 pin 5 Amp socket outlet point on an independent board.
All as per Item No 77 above but for one 5 pin 5 Amp socket outlet point on the same board with other switch.
All as per Item No 77 above but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 2.50sqmm and green colour earth cable of size 2.50sqmm.
S&F in replacement sub main wiring with two single core PVC insulated (FRLS) unsheathed multistranded copper conductor of size 4 sqmm nominal cross sectional area and one run of 4 sqmm nominal cross sectional area PVC insulated (FRLS) unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including not less than 20mm dia 'medium grade' PVC concealed conduits (ISI marked) and fittings complete all as specified and directed. NOTE:- One unit length shall measured as two run of main wire and one run of conduit & earth wire.
S & F switch piano flush button single pole one way 5 Amp 240 volt complete all as specified and directed.
S & F switch piano flush button single pole one way 15 Amp 240 volt complete all as specified and directed.
S&F socket outlet flush type multipurpose 2 in 1, 5 pin 6Amp, 230 volts complete all as specified and directed.
S&F socket outlet flush type multipurpose 2 in1, 3 pin 5 and16 Amp, 230 volts complete all as specified and directed.
Ceiling rose three terminal surface bakelite type AC 50 Hz 230V, complete all as specified and directed.
S&F sheet metal enclosure for MCB DB double door type, single pole and neutral 8 way 240 Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.
S&F sheet metal enclosure for MCB DB double door type, triple pole and neutral 4 way 415Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.
S&F MCB, triple pole & neutral 63 Amp, 415 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.
S&F MCB, single pole & neutral 32/40 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.
S&F MCB, single pole 6 to 32 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.
Supply and fixing building security light and fitting any type and provision of LED street light fitting, 45W, complete all as specified and directed. .
Supply, installation testing and commissioning of storage type water heater 25 ltrs capacity , minimum 4 star Star rated , vertical mounting type complete made out of CRCA outer body, copper storage tank, heating element, thermostat, thermal cut out, glass wool etc. complete including making necessary electrical connections with suitable size copper multistranded cable complete all as specified and directed.
Fresh air ventilator fan 230Volt, 50Hz, single phase AC supply, 250mm sweep with PVC louvers complete with PVC body and PVC blades and with and including provision of 3 core 1.5 Sq.mm flexible cable from ceiling rose to ventilating fan including writing MES number on fresh air ventilator fan motor using synthetic enamel paint of approved tint, complete all as specified and directed.
Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20Amp 240V, fixed in repair, complete all as specified and directed.
S & F Street light bracket arm of length not less than 1.5 m made out of GI tubing, 40 mm bore, light grade fixed to pole, etc with suitable size flat iron clamp, nuts, bolts including painting with two coats of aluminium paint over a coat of red oxide, zinc chrome primer complete all as specified and directed.
Material and labour for river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling complete as specified and directed . Note :- Punned thickness shall only be considered for payment
Boring/Drilling ( horizontally) manually under existing road ( maximum 10 M in width) suitable for passing GI tubing of 40 to 80 mm bore complete all as specified.
Supplying & laying fly ash bricks as per IS 12894 -2002 over LT/HT cable laid flat for protection of cable complete all as specified and directed.
Supplying and fixing 50 mm bore Galvanised mild steel pipe /tubing, light grade complete with all fittings, laid in trenches / under roads, drain, paths, fixed to poles/ walls with Mild steel clamps , bolts , nuts and washers complete all as specified and as directed. Excavation & Earth work shall be measured and paid separately)
Supply and Fixing wall/surface mounting luminaires integrated LED Batten 20 W, 6000 K,100 lumens/watt , 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements complete all as specified and directed.
Supply and fixing wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 10W, 6500 K, 230V ,100 lumens/watt,with extruded aluminium housing & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrngements complete all as specified and directed.
S&F Plastic Automatic Hand Dryer (White, Standard) MODEL NO. DETUAMHDRY001_B or or euivalent complete all as specified and directed.
M & L of Earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less 1.5 mtr deep below normal ground level connected to galvanized earth lead wire 4.0 mm dia by means of nut, bolts, check nut & washer of galvanized iron or of steel, earth lead protected by 15 mm dia GI pipe light grade, watering pipe 20 mm dia GI light grade, GI wire mesh, GI funnel, alternate layer of char coal and salt, PCC chamber, recessed for and including RCC cover including all necessary excavation & earth work, earth 7.5 mtr wire connected to main switch board, testing the earthing after completion all as specified and shown in electric plate No 3 of MES SSR Part-I 2009 complete all as specified and directed .
S&F Polycarbonate switch piano flush type, SP,5/6 Amps, complete all as specified and directed.
S&F Polycarbonate switch piano flush type, SP, 16/20 Amps, one way equivalent of other specified make complete all as specified and directed.
S&F Polycarbonate socket out let 6 pin, 20 Amps ISI Marked 20 Amps 240 Volts flush type, make complete all as specified and directed.
S&F Indian standard fan step regulator 100 watt, complete all as specified and directed.
M&L for concealed sub main wiring comprising two single core, 10 Sq mm nominal cross sectional area multi on same copper conductor cable, PVC insulated FRLS grade unsheathed 1100 Volts grade drawing in and over PVC conduits and conduit fittings complete (concealed type) including S&F 10 Sq mm nominal cross sectional area on same copper conductor cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified and directed. (Cutting chases and making good of disturbed surfaces shall deem to be including in the unit rate quoted by tenderer). (Note :- Extra length of cables/wire required for connection to MCBs shall not be measured and the rate quoted by contractor for per unit shall be deemed accordingly)
S&F plug and socket DBs with Single pole MCBs rated 20 Amps capacity all as specified or equivalent of other make including making niche in wall and mounted flush complete all as specified and directed.
Supply & fixing Ceiling fan 1200 mm sweep AC 230 volts single phase 5 star rated including making connection with three core PVC insulated 1100 volts grade multi stranded copper wire of appropriate size including testing complete all as specified and directed.
Supply and fixing LED lights fitting 1x 18W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
M/S Reliance Construction
M K Engineers and Contractors
M/S SHIVA CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .