Construction of Panchayat Ghar at Samroli , Panchayat Samroli , Block Narsoo under RGSA New Panchayat Ghar Scheme FY25-26

Earth work in excavation by mechanical means(hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (notexceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 meters 80 % All kinds of soil 20% ordinary rock

Filling with available fly ash and earth (excluding rock) in trenches or embankment in layers (each layer should not exceed 15 cm), with intermediate layer of compacted earth (Soil density of 98%) after every four layers of compacted depth of fly ash, sides & top layer of filling shall be done with earth having total minimum compacted thickness 30 cm or as decided by Engineer -in-charge, including compacting each layer by rolling/ ramming and watering, all complete as per drawing and direction of Engineer -in - charge

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Sal Wood

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class Kail wood

Providing and fixing of hardware fittings of approved quality: T-Bolts 100 mm

Providing and fixing of hardware fittings of approved quality: T-Bolts 150 mm

Providing and fixing of hardware fittings of approved quality: I Hook

Providing and fixing of hardware fittings of approved quality: Handles 125 mm

Providing and fixing of hardware fittings of approved quality: Handles 200 mm

Providing and fixing of hardware fittings of approved quality: Aluminium Drop

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1.5:3 (1 cement : 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level: Cold Twisted Bars

Centering and shuttering including strutting, propping etc. and removal of forms for: Suspended floors, roofs, landings, balconies and access platforms.

Centering and shuttering including strutting, propping etc. and removal of forms for: Edges of slab

Centering and shuttering including strutting, propping etc. and removal of forms for: Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Centering and shuttering including strutting, propping etc. and removal of forms for: Foundations, footings, bases of columns etc. for mass concrete.

12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand)

6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cementmortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. 11.50.1 In colour such as White, Ivory, Grey, Fume Red Brown

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to steel windows by welding

Providing and fixing brass bib cock of approved quality. 15 mm nominal bore

Mirror of superior make glass 60x45cm 4mm thick

Providing and fixing PVC Pipes of approved quaity 75 mm

Providing and fixing PVC Pipes of approved quaity 110 mm

F Trap 110x75 mm

F Trap110x110

Cowl 110mm

Collar 110mm

Door Bend 110 mm

Soap Dish

Angle Valve

Brass Ball Valve 25 mm

Waste Pipes

CP Grating

CP Brass Center Hole Mixer

Short Body

Sink Coupling

CP Nipple all size

Connection Pipe

Tank Nipple 25 mm

Elbow 25 mm

Tee 25 mm

Union 25 mm

Towel Rod

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work-exposed on wall, including fixing the pipe with clamps at 1.00 meter spacing 15 mm medium

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work-exposed on wall, including fixing the pipe with clamps at 1.00 meter spacing 20 mm dia. nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work-exposed on wall, including fixing the pipe with clamps at 1.00 meter spacing 25 mm dia. nominal bore

Providing and fixing r high density polyethylene water storage loft tank with cover, conforming to ISI: 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately.

Providing and fixing of water motor of 1HP Capacity (Basic Series Crompton) incl. all necessary fixtures.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: 610x460 mm bowl depth 200 mm

P/F of wiring for lighting/ fan point/ exhaust fan in 2x1.5 sq mm PVC multi strand copper wire FRLS of ISI approved incl cost of 6 amp modular switch, cover plate, GI box of approved ISI marked complete job. As approved by site incharge.

P/F of Wiring for light/ power plug with 2X2.5 sq. mm FRLS PVC insulated multi strand copper wire of ISI marked\incl. cost of 16 amp switch and socket of modular type, modular cover plate, and GI box of approved ISI mark. As approved by site incharge. required.

P/F of Wiring for computer power points with 2X2.5 sq. mm FRLS PVC insulated multi strand copper wire of ISI marked\incl. cost of 2 nos 6 amp switch and 2 nos 6 amp socket of modular type, modular cover plate, and GI box of approved ISI mark. As approved by site incharge

P/f of 9/12 watt LED surface light of havells/ philips/ H.G make approved by site incharge

P/f of 1200 mm sweep ceiling fan of Usha, anchor, crompton with 2 module electronic fan regulator fixed on existing GI box ISI marked

P/f of 150 mm sweep exhaust fan of Usha, anchor, crompton with all necessary connections complete job

P/f of 50 watt LED light of approved quality fixed on outside building approved by site incharge

P/f of 25 mm dia 2 mm thick PVC conduit of ISI marked recessed in walls with refacing of walls in original position.

P/f of 6-16 amp MCB single pole of "C" curve havells/ indo asian/ L&T make approved by site incharge.

P/f of double pole MCB of following ratings of C curve havells/ indo asian/ L&T make 40 amp

P/f of double pole MCB of following ratings of C curve havells/ indo asian/ L&T make 60 amp

P/f of double pole MCB of following ratings of C curve havells/ indo asian/ L&T make 100 amp

P/f of 6 way horizontal TPN DB of SSK/ havells/ anchor ISI marked recessed in walls complete with refacing of walls

P/f of 25 sq mm aluminum cable un armoured of havells make as main service line.

Carriage of cement

Carriage of sand

Carriage of 20mm stone aggregate

Carriage of 40 mm stone aggregate

Carriage of bricks

Add CIB