Loading
Loading…
Loading…
Tender ID
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical | Accepted-Technical Technically qualified |
Tender Value
₹10.8 L
EMD Value
₹21,608
Closing Date
9 Apr 2026, 3:00 pmClosed
AGM CE
FCI HQ New Delhi
Special civil repair works at FCI flat no 42,43 and 722 at Asian Games village, New Delhi.
2026_FCI_903646_1
CE/HQ/04/25-26
Open Tender
Civil Works - Buildings
Percentage
Asian Village, New Delhi
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹21,608
Yes
12 May 2026
25 Mar 2026
10 Apr 2026
25 Mar 2026
9 Apr 2026
25 Mar 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge. 50 mm average thickness | |||||
| 2 | Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. Bars above 12 mm diameter | 1 | meter | - | - |
| 3Providing and applying anticorrosive treatment to exposed structural reinforcement to two coats of approved make and to be applied with paint brush with time interval of minimum 8-10 hours between each coat after the application of two coats of alkaline rust converting primer. (The measurement shall be Sqm of repaired / treated concrete surface area.) | |||||
| 4Providing and inserting 12 mm dia galvanised steel injection nipple in honey comb area and along crack line including drilling of holes of required diametre (20 mm to 30 mm) up to depth from 30 mm to 80 mm at required spacing and making the hole & crack dust free by blowing compressed air, sealing the distance between injection nipple with adhesive chemical of approved make and allow it to cure complete as per direction of EngineerIn-Charge. | |||||
| 5Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in-Charge. (The payment shall be made on the basis of actual weight of approved grout injected.) Epoxy injection grout in concrete/RCC work of approved make | |||||
| 6Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of EngineerIn-charge complete in all respect. Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make | |||||
| 7Providing and applying shrinkage-controlled, polymer modified, fibre reinforced cementitious repair mortar of Grade M45 Make FOSROC on the prepared surface by wet spray application, or by hand/trowel where necessary, and curing with an approved curing compound. The material shall be a single component, pre-packed system, mixed with clean water at a water–powder ratio of approximately 0.18 (4.25-4.50 litres per 25 kg bag). The maximum thickness for each layer of PMM application shall be limited to 15 mm, bond coat should be applied before application of each layer and work to be done in multiple layers, with overhead applications up to 25-50 mm and vertical applications up to 50-60 mm, built in layers as required. | |||||
| 8Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | |||||
| 912 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) | |||||
| 10Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete | |||||
stage.html
html • 0.02 MB
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.11 MB
MTF.pdf
Tender Documents • 1.70 MB
BOQ_949819.xls
BOQ • 0.30 MB
corri.pdf
PDF • 1.41 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .