Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹2.3 CrAdmitted-Finance | -5.16% | ₹2.3 Cr | L1 | Admitted-Finance |
| 2 | L2₹2.5 CrAdmitted-Finance | +0.00% | ₹2.5 Cr | L2 | Admitted-Finance |
| 3 | Rejected-Technical | - | - | - | Rejected-Technical Technically not Responsive |
| 4 | Rejected-Technical | - | - | - | Rejected-Technical Technically not Responsive |
| 5 | Rejected-Technical | - | - | - | Rejected-Technical Technically not Responsive |
Updated dates
Tender Value
₹2.9 Cr
EMD Value
₹5.8 L
Closing Date
31 Jan 2026, 4:00 pmClosed
Executive Engieer RnB Division Kulgam
Executive Engieer RnB Division Kulgam
Construction / Upgradation of Frisl Palpora Changam road
2026_PWDJK_300908_1
100/2025-26/RnB/Kul/9161-71 dated 19-01-2026
Open Tender
Civil Works
1095 days
Kgm
Please refer Tender documents.
10 documents required · 10 mandatory
₹5,500
MH 0059
₹5.8 L
Superintending Engineer RnB Circle Kulgam
13 Feb 2026
19 Jan 2026
2 Feb 2026
19 Jan 2026
31 Jan 2026
19 Jan 2026
23 Jan 2026
Site Clearence
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as10 sqm on plan including disposal of excavated earth, leadupto50meterand lift upto 1.5m, as directed by Engineer-in-Charge. All kinds of soil :
Felling trees beyond 30Cm girth upto and including 60Cm girth (measured at a height of 1 m above ground level) including cutting of trunk and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material as per the directions of Engineer Incharge Complete
Felling trees beyond 60Cm girth upto and including 120Cm girth (measured at a height of 1 m above ground level) including cutting of trunk and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material as per the directions of Engineer Incharge Complete
Felling trees beyond 120Cm girth upto and including 240Cm girth (measured at a height of 1 m above ground level) including cutting of trunk and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material as per the directions of Engineer Incharge Complete
Demolishing cement concrete manually/by mechanical means in 1:3:6 or richer mix (i/c equivalent design mix) including stacking of serviceable material and disposal of unserviceable material as per the directions of Engineer Incharge Complete
Laying of RCC Pipes
Providing and laying of NP2 RCC pipes in proper position/ grade including excavation of trenches, incld: P/L of RBM around the pipes as cushion inclding bed of Cement Concrete 1:4:8 over stone soling including cost and carriage of pipes, all materials upto site of work complete.
450mm dia
600mm dia
Pavement
Providing and laying River Bed Material ( RBM) with specifed size (75-90mm)including sorting , spreading in uniform layers on existing surface and consolidation each deposited layer with Vibrator Roller to the required gradient and camber with all carriages to site of work including loading and unloading complete
supplying and stacking, laying, spreading and compacting stone aggregate of 63-45mm size to WBM Specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller of 8-10 tonne capacity in stages to proper grade and camber applying and brooming 13.2 mm type A screening/ binding material to fill up interstices of coarse aggregate, watering and compacting to required density including all carriages of materials as involved complete (Finished work to be measured 75mm thick compacted thickness)
Providing, laying, spreading and compacting 100 mm thick graded stone aggregate (size range 53 mm to 0.075 mm) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge Complete
Providing and applying tack coat using hot straight run bitumen of grade -VG-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications. (On WMM/WBM Surface @0.75Kgs/Sqm)
Providing and laying 50 mm thick bituminous macadam with bitumen of grade VG-10 @ 3.5% (percentage by weight of total mix) prepared in Drum type/ Batch Type Hot Mix Plant using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer-in-Charge
Providing and laying semi-dense Bituminous concrete of 25 mm compacted thickness with bitumen of grade VG 10 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Drum Type/Batch type Hot Mix Plant using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge
Providing and laying 6mm thick seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG-10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road all complete.
Supply and filling of Nallah Muck/RBM/Khak Bajree in berms including spreading , dressing , watering and compacting with road road roller 8-10 ton capacity etc complete job
Cement Concrete Drain
Earth work in excavation all kinds of soil by mechinical means in trenches for foundations, etc. including dressing of sides and ramming of bottoms, all leads, lift including getting out excavated earth and disposal of surplus excavated earth as per the directions of Engineer In-Charge complete
Providing and laying stone soling dully hand packed in maintaning level and section including carriages of all materials complete
Providing and laying in position cement concrete 1:4:8 ((1 Cement:4 Corase sand: 8 grade stone aggregate 40 mm nominal size crushed including curing but excluding the cost of centring and shuttering. All work upto plinth level including carriages of all materials complete
Providing and laying in position cement concrete in 1:2:4 (1 Cement: 2 Corase sand: 4 grade stone aggr 20 mm nominal size crushed) including curing but excluding the cost of centring and shuttering all work upto plinth level and above plinth level upto required height including carriages of all materials complete
Providing and laying 40 mm thick Cement concrete flooring 1:2:4 ( 1 cement : 2 coarse sand: 4 graded stone aggr 20 mm nominal size crushed) finished with a floating coat of neat cement incld. cement slurry including carriages of all materials complete
Centering and shuttring including strutting, propping, etc. and removal of form work for Foundation,footings etc
Protection Work (R/ Wall)
Earth work in excavation all kinds of soil by mechinical means in trenches for foundations, etc. including dressing of sides and ramming of bottoms, all leads, lift including getting out excavated earth and disposal of surplus excavated earth as per the directions of Engineer In-Charge complete
Providing and laying stone soling duly hand packed in maintaning level and section including all carriages complete
Providing and laying in position cement concrete 1:3:6 ((1 Cement:3 Corase sand: 6 grade stone aggregate 20 mm nominal size crushed including curing but excluding the cost of centring and shuttering. All work upto plinth level including all carriages complete
Providing and laying in position cement concrete 1:2:4 ((1 Cement:2 Corase sand: 4 grade stone aggregate 20 mm nominal size crushed including curing but excluding the cost of centring and shuttering. All work upto and above plinth level including all carriages complete
Centering and shuttring including strutting, propping, etc. and removal of form work for walls (Walls any Thickness)
Supply and filling of RBM as Back as backfilling including dressing , leveling, ramming and loading , unloading including all carriages complete
Providoing and fixing of PVC Class B 75mm dia Weep Holes in proper position etc complete job
Culvert 3 Nos 1x2mtr span
Earth work in excavation by mecahnical means in foundation trenches, drains pipes and cables etc (not exceeding 1.5 Mtr, in width or 10 Sqm on plan) incld. dressing of sides and ramming of bottoms, lift, upto 1.5 Mtr. Incld. getting out excavated soil and disposal of surplus soil as directed within a lead of 50 Mtr. in all kinds of soil incld: dewatering of foundation trenches & diverting of nallah during execution of work complete job
P/Laying of Nallah stone soling, handpacked in bed incl. all carriages complete
P/L in position cement conc 1:4:8 (1 Cement: 4 coarse sand: 8 graded stone aggregate 40 mm nom: size )crushed). All work upto plinth level. excld: the cost of Centering and shuttering.incld: all carriage
Providing and laying in position cement concrete of 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)s including curing but excluding the cost of centring and shuttering. All work upto plinth level and above plinth level. Incld: all carriage
Providing and laying in position specified grade of reinforced cement concrete 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including curing but excluding the cost of centering, huttering, finishing and reinforcement. All works upto and above plinth level plinth level incld: all carriage
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars of grade Fe-500D or more. Inculding all carriages complete
Centering and shuttring including strutting, propping, etc. and removal of form work for
Foundation , Footings, bases of Columns etc for mass Concrete
Walls (Walls any thickness)
Suspended floors
Edges
Supply and filling of RBM as Back as backfilling including dressing , leveling, ramming and loading , unloading including all carriages complete
Maintenance Cost for 5 Years
1st Year @ 10%
2nd Year @ 15%
3rd Year@ 20%
4th Year@ 25%
5th Year @ 30%
These Estimated rates are exclusive of GST @18% however the GST shall be paid on gross amount excluding Labour cess proportionately
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.69 MB
Tendernotice_2.pdf
PDF • 2.13 MB
BOQ_976304.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid