Construction of Control room building and Providing plinth foundation for structure and equipment , cable duct and other allied civil works for the establishment of Ugayanur 110/11 KV SS in Tirupur EDC

Amount

Civil works

Clearing Light jungle and disposing off to a place away from the site as directed by the Engineer in charge including all Labour charges,T&Ps etc., complete.

Earth work excavation for foundation in HGS and and depositing on bank with initial lead of 10 m and initial lift of 2 m in Hard stiff clay Stiff black cotton soil, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders as per standard Specification as directed by the Engineer at site.

Earth work excavating for foundation and depositing on bank with initial lead of 10m and initial lift of 2 m in soft disintegrated rock, laterite, soft rock (or) kankar not requiring blasting as per standard Specification as directed by the Engineer at site.

Earth work excavating for foundation and depositing on bank with initial lead of 10m and initial lift of 2 m in Medium Rock and Dense Medium Rock not requiring blasting as per standard Specification as directed by the Engineer at site.

Earth work excavation for Foundation in Hard rock by Wedging and Chiseling and trimming to proper shape where blasting is prohibited and stacking for measurements including all leads, lifts etc., as per standard specification and as per instruction of the Engineer at site.

Providing Anti Terminate Treatment over the Plinth Building area in 3 stages ( foundation stage, Flooring stage and Outside area ) including cost of all materials, labour, lead, lift etc., as per standard Specifications and directed by the Engineer incharge complete.

Supplying and Filling with M sand for foundation and floor including cost of sand, filling charges as per standard specification(watering & consolidation with all leads and lifts etc., complete.

Plain cement concrete in PCC 1:3:6, using 20 mm HBG metal, for foundation / Padding Concrete without form work including cost of all materials, labour charges including consolidation, curing, all leads, lifts, etc., as per standard Specification complete.

Providing concrete road with P.C.C. 1:3:6, using 40mm HBG metal, including cost of cement, all materials, labour, curing, all leads, and lifts, etc., complete.as per standard specification

Finishing the concrete road with Reinforced Cement concrete in C.C. 1:1½:3 mix, using 12 to 20mm HBG machine crushed metal including cost of cement, all materials, labour, curing, all leads and lofts vibrating charges including cost of shuttering as per standard specification, etc., complete. but excluding cost of steel reinforcement.

Providing expansion joint for road concrete at same intervals of 5 m in both direction using prevalid aspheltics pad 15 mm thick to full width and plastering with CM 1:3, 12 mm thick including cost of cement, all materials, labour, curing, all leads, and lifts, etc., complete.as per standard specification

PCC 1:2:4 mix using 20mm HB stone machine crushed metal without form work for plinth including cost of all labour, materials, lead, lift, curing, etc., complete.

PCC 1:2:4 mix using 20mm HB stone machine crushed metal with form work for plinth including cost of all labour, materials, lead, lift, curing, etc., complete.

Reinforced cement concrete in C.C. 1:1 ½ :3 mix for mat concrete with out form work using 12 to 20mm HBG machine crushed metal including cost of cement, all materials, labour, curing, all leads and lofts vibrating charges including cost of shuttering as per standard specification, etc., complete. but excluding cost of steel reinforcement

Reinforced Cement concrete in C.C. 1:1½:3 mix, using 12 to 20mm HBG machine crushed metal with form work for Breaker plinth including cost of cement, all materials, labour, curing, all leads and lofts vibrating charges including cost of shuttering as per standard specification, etc., complete. (But excluding cost of steel reinforcement.)

Reinforced Cement concrete in C.C. 1:1½:3 mix, using 12 to 20mm HBG machine crushed metal with form work for cover slab including cost of cement, all materials, labour, curing, all leads and lofts vibrating charges including cost of shuttering as per standard specification, etc., complete. (But excluding cost of steel reinforcement.)

Reinforced Cement concrete in C.C. 1:1½:3 mix, using 12 to 20mm HBG machine crushed metal with form work for culvert slab including cost of cement, all materials, labour, curing, all leads and lofts vibrating charges including cost of shuttering as per standard specification, etc., complete. (But excluding cost of steel reinforcement.)

Supplying and fixing of approved quality of MS Rails (90 LBS) for transformer plinth including in proper alignment and interconnections the two rails with flat on both ends by welding including labour, lead, lift etc. complete, as per standard specification.

Supplying & Fixing of GI angle required length keeping in required alignment and level in yard cable duct fixing at 600mm C/c including all labour, lead, lift etc., complete.

Labour charges for Transporting of all cable duct cover slab from curing to duct keeping them alignment and fixing them in position including lead, lift, labour etc., complete.

Labour charges for assembling of various plinth template for providing concrete, including transporting from one plinth to another aligning fixing to correct level and dismantling the template after concrete, including cost of Labour lead, lift, etc., complete, as per standard specification.

Supplying and Fabrication of 20mm dia sizes of M.S grouting bolt including cutting, bending, threading 100 mm length including galvanizing and providing 2 nos. nuts with washer etc and fixing them in plinth including cost of material, Labour lead, lift, etc., complete, as per standard specification.

Supplying and Fabrication of 25mm dia sizes of M.S grouting bolt including cutting, bending, threading 100 mm length with galvanized and providing 2 nos. nuts with washer etc and fixing them in plinth including cost of material, Labour lead, lift, etc., complete, as per standard specification.

Supplying and fixing readymade earth collars of size 45 cm inner dia with 30 cm height and shell thickness of 40 mm including cost of all materials,transport to site , labour, lead, lift, etc., complete., as per standard specification.

Supplying and fixing PVC bib cock including cost of all materials, labour, lead, lift, etc., complete., as per standard specification,

Supplying, fixing, laying and testing of 25mm dia PVC pipe 10kg/cm2 pressure of approved good Quality ISI make for earth pit including cost of pipe, GI specials, all materials, lead, lift, etc., complete, as per standard specification.

Supplying and fixing, laying and testing of 40mm dia PVC pipe 10kg/cm2 pressure of approved good Quality ISI make for earth pit main line including cost of pipe, GI specials, all materials, lead, lift, etc., complete, as per standard specification.

Supplying & fixing of GM Gate Valve 25mm with ISI make for PVC water Supply arrangements including cost of Pipe, Bend, Tee, l - Bow, reducer etc., as required of all mateials, lead, lift , Labour charges ete. Complete.

Supplying & fixing of GM Gate Valve 40mm with ISI make for PVC water Supply arrangements including cost of Pipe, Bend, Tee, l - Bow, reducer etc., as required of all mateials, lead, lift , Labour charges ete. Complete.

Supplying and spreading of 20 metal to a thickness of 100mm over the quarry dust of 100 thickness layer inside the yard including cost of all materials, labour charges , all leads, lifts, as per standard specification etc., complete.

Colour washing with two coats using ready mixed Weather Proof Exterior Emulsion (First quality - Apex or its equivalent) of approved quality and colour over a coat of exterior emulsion water based primer for Plinth exterior surfaces including through scrapping, clan removal of dirt, cost of all materials, scaffolding, Labour, Lead, Lift etc., complete and including necessary crack filling paste, putty whereever required.

Supplying and fixing in position of MS grill gate including cost of all materials lead, lift, etc. as per type design drawing with proper locking arrangements as directed by the engineer at site including cost of painting with two coats of enamel paint over with one coat of red oxide.

Providing GI equal angles 75x75x8 MM as fencing post with 2 Nos of 150 mm length MS cleat of 30x30x5 mm to hold the chain link fencing,back supportrd with 50x50x6 mm GI flat using 75 mm GI bolt with 2 Nos of nut and washers to tie the chainlink,

Providing GI equal angles 65x65x8 MM as fencing post with 2 Nos of 150 mm length MS cleat of 30x30x5 mm to hold the chain link fencing,back supportrd with 50x50x6 mm GI flat using 75 mm GI bolt with 2 Nos of nut and washers to tie the chainlink,

Supplying ,laying and tensioning of chain link fencing with height of 1.85 m tying with intermediate post using GI flat with bolt & nut including cost of all materials, labour charges all leads, lifts, etc., as per standard Specification complete.

Supplying and laying and fixing of 75mm dia PVC pipe to resist 6 Kg/cm2 water pressure to proper alignment & slope for weep holes as required and as directed by the Engineer at site including cost of pipe and fixing in position, testing all matrials solution , lead, lifts etc., complete.

Labour charges for writing Name Board/Slogans over the plastered surface wall in the control room including cost of paint & all materials, labour, lead, lift, etc. complete, as per standard specification.

Labour charges for Transporting of all types of fence post to working site, keeping them alignment and erecting them in position including lead, lift, labour etc., complete.

Reinforced cement concrete in CC 1:1½ :3, mix using 12mm to 20mm HBG downgraded metal machine crushed with form work for RCC Footing including cost of cement, all materials, labour, curing, all leads,lifts,cost of shuttering as per Standard Specification. (But excluding cost of steel reinforcement)

Reinforced cement concrete in CC 1:1 ½ :3, mix using 12mm to 20mm HBG downgraded metal machine crushed with form work for RCC column members below ground level including cost of cement, all materials, labour, curing, all leads,lifts,cost of shuttering as per Standard Specification. (But excluding cost of steel reinforcement)

Reinforced cement concrete in CC 1:1½ :3, mix using 12mm to 20mm HBG downgraded metal machine crushed with form work for RCC Grade beams , Plinth beams, sill beam including cost of cement, all materials, labour, curing, all leads,lifts,cost of shuttering as per Standard Specification. (But excluding cost of steel reinforcement))

Re-Filling with Excavated Earth in foundation and Basement including cost of all Labour, lead, lfit etc., complete.

Disposal of Excess of surplus earth away in low lying area with a lead of 100 Mts including spreading and levelling labour, lead, lift as per standard specification, etc., complete.

Supplying and filling of gravel with the proper consolidatioin as per standard specification including cost of all materials all lead lift labour charges etc. complete.

Brick work in C.M. 1:5 using chamber burnt class II bricks, for Basement & superstructure including, cost of cement, all materials, labour, curing, all leads and lifts, etc complete as per Standard Specification.

Brickwork in CM 1:3 mix using II class chamber brick of size 9"x 4 3/8" x 2 3/4" for bath, fol, brick on edge, partition wall, superstructure including cost of labour materials, curing, lead,water charges, lift, etc., complete.

Reinforced cement concrete in CC 1:1 ½ :3, mix using 12mm to 20mm HBG downgraded metal machine crushed with form work for RCC sill beam including cost of cement, all materials, labour, curing, all leads,lifts,cost of shuttering as per Standard Specification. (But excluding cost of steel reinforcement.)

Reinforced cement concrete in CC 1:1 ½ :3, mix using 12mm to 20mm HBG downgraded metal machine crushed for with form work RCC Loft including cost of cement, all materials, labour, curing, all leads,lifts,cost of shuttering as per Standard Specification. (But excluding cost of steel reinforcement.)

Reinforced cement concrete in CC 1:1 ½ :3, mix using 12mm to 20mm HBG downgraded metal machine crushed with form workfor RCC Lintel including cost of cement, all materials, labour, curing, all leads,lifts,cost of shuttering as per Standard Specification. (But excluding cost of steel reinforcement.)

Reinforced cement concrete in CC 1:1 ½ :3, mix using 12mm to 20mm HBG downgraded metal machine crushed for RCC Sunshade 600mm wide including cost of cement, all materials, labour, curing, all leads,lifts,cost of shuttering as per Standard Specification. (But excluding cost of steel reinforcement.)

Reinforced cement concrete in CC 1:1 ½ :3, mix using 12mm to 20mm HBG downgraded metal machine crushed for RCC Sunshade 1200mm wide including cost of cement, all materials, labour, curing, all leads,lifts,cost of shuttering as per Standard Specification. (But excluding cost of steel reinforcement.)

Reinforced cement concrete in CC 1:1 ½ :3, mix using 12mm to 20mm HBG downgraded metal machine crushed with form work for RCC Roof Beam including cost of cement, all materials, labour, curing, all leads,lifts,cost of shuttering as per Standard Specification. (But excluding cost of steel reinforcement.)

Reinforced cement concrete in CC 1:1 ½ :3, mix using 12mm to 20mm HBG downgraded metal machine crushed for RCC Roof Slab 130mm Thick including cost of cement, all materials, labour, curing, all leads,lifts,cost of shuttering as per Standard Specification. (But excluding cost of steel reinforcement.)

Reinforced cement concrete in CC 1:1 ½ :3, mix using 12mm to 20mm HBG downgraded metal machine crushed for RCC waist Slab 150mm Thick including cost of cement, all materials, labour, curing, all leads,lifts,cost of shuttering as per Standard Specification. (But excluding cost of steel reinforcement.)

Providing steel reinforcement with MS/RTS rods of reputed approved make for reinforced concrete works, including cost of steel MS/RTS rods, binding wire, Minor T & Ps labour charges for cutting, straightening bending as per type design drawing, placing aligning, and tying properly with all leads and lift etc., complete as per Standard Specification

Supplying and laying PCC 1:2:4 using 6mm metal for thickness 80 mm with required slope and laying one course solar reflective ceramic tiles of 305x305 mm x7mm in cement morter 1:3 12 mm tk and pointing with same morter including cost of cement, all materials, labour, curing, all leads,lifts,etc complete

Plastering with CM 1:3, 10 mm thick for Ceiling & Sunshade bottom including cost of cement, all materials, labour, curing, leads and lifts etc., complete.

Plastering with CM 1:5, 12 mm thick for Wall surface including cost of cement, all materials, labour, curing, leads and lifts etc., complete.

Floor finsinhing with CM 1:3, 12 mm thcik over PCC 1:3:6. using 20 mm metal, 100 mm thick for Store room including cost of cement, all materials, labour, curing, leads and lifts etc., complete.

Providing projector border 20 cm width in CM 1:3 20mm thick including cost of all materials, labour, curing, leads and lifts etc., complete.

Providing Projector border 7.5cm width in CM 1:3 20mm thick including cost of all materials, labour, curing, leads and lifts etc., complete.

Supply and fixing in position of anodised Aluminium fully glazed door using outer frame 101.60 x 44.45 x 2.10mm @ 1.608Kg/M and door inner frame side and vertical 53.70 x 44.45 x 2.30mm @ 1.238 Kg/M, door bottom section 83.50 x 44.45 x2.40mm@ 1.679Kg/m and diveder and top of door frame 47.62 x 44.45x 2.17 mm@ 1.072 Kg /M glazing clips of 17.30 x 19.0 x 0.60mm @ 0.083 Kg/M, rubber beedings, hinges, handle, hydraulic floor spring, automatic door closer etc, and with 12mm tk. one side laminated board at bottom half portion and top half portion with 5.50mm thick sun cool glass including cost of all materials, lead, lift, etc, complete Single leaf door 1.00 x 2.10 m

Manufacturing and fixing of UPVC (Unplasticized polyvinyl chloride) slided Windows of required section with Shutter inner lock glazing clips rubber gaskets sliding wheel & 5 mm thick plain glass Panelling including cost of all materials, locking arrangement, labour, lead, transport, lead, lift etc., complete.

Manufacturing and fixing of UPVC (Unplasticized polyvinyl chloride) Ventilator size 0.75 X 0.60 m fully galzed Lover type as per standard specifgications with frame and frosted glass 4 mm thick including coast of all materials, labor, lead, lift etc., complete.

Supplying and fixing of PVC Doors with a size of 0.800 X 2.00 m for the replacement of existing available corroded / damaged Doors in Bath & WC rooms with Heavy duty as approved by the concerned including Doors outer frame, furnitures, transporting, fixing etc., complete

Supplying and fixing of Doors (Single leaf) using MS angle 50x50x6mm for door frame and 40x40x6mm for shutter frame and shutter 18 Gauge MS Sheet with stiffners both front and back M.S. Flat of size 32x3mm with 6" hinges heavy duty, all Aluminium anodized fittings, including Painting two coats ready mixed enamel paint with One coat of primer approved quality and colour cost of all materials, leads, lifts labour etc.,

Supplying and fixing Windows (4 leaves) of approved size using 35x35x5mm MS Angle for outer frame 25x25x3mm Angle for shutter frame with shutter 18 Gauge MS Sheet of bottom panel and top panel with 12 mm thick glass, fixing 12mm MS Rods horizontally (11 Nos.) with necessary locking Arrangements, including Painting two coats ready mixed enamel paint with One coat of primer approved quality and colour for fabricated steel work including cost of all materials labour leads, lifts etc., complete.

Supplying, fabrication and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete

Supplying and laying of Non - slippery type Vetrified tiles for Control Room etc., of approved quality and colour laid in CM. 1:2 , 12 mm thick and pointing with white cement using 0.40Kg./m2 including finishing joint and pointing Flush with tiles surface including cost of cement all materials Labour ,curing , leads and lifts etc., complete.

Supplying and laying of non-slippery tiles of 300 x 300 x 8mm of approved ISI mark of best quality & colour laid in CM 1:2, 20mm thick, and pointing with white cement using 0.40 Kg/m2 including finishing the joint and pointing flush with tiles surface, including cost of cement, all materials, labour, curing, all leads and lifts etc., complete as per standard specification.

Dadooing wall with glazed tiles of approved colour of required size with 6 mm thick of approved quality laid in CM.1:2 ,12 mm thick after scrapping & cleaning the existing wall surface as instructed and pointing with white cement using 0.40Kg / m2 including finishing the joint and pointing flush with tiles surface including cost of cement all materials labour curing , leads lifts etc., as per standard specification complete.

Supplying and laying of Acid Proof Tiles for Battery Room of approved quality and colour laid in CM. 1:2 , 12 mm thick and pointing with white cement using 0.40Kg./m2 including finishing joint and pointing Flush with tiles surface including cost of cement all materials Labour ,curing , leads and lifts etc., complete.

Supplying and fixing white glazed earthen ware (Indian type) water closet of size 20" with flushing cistern of approved quality with 'P' and 'S' Trap embedded the closet with trap to shape in position with brick jelly concrete 32:12:5 using 40mm hard broken brick jelly finishing the top to required shape etc., including cost of all materials labour, lead ,lift etc., complete.

Supplying and fixing white glazed earthen ware (European type) water closet of size 20" with flushing cistern of approved quality with 'P' and 'S' Trap embedded the closet with trap to shape in position with brick jelly concrete 32:12:5 using 40mm hard broken brick jelly finishing the top to required shape etc., including cost of all materials labour, lead ,lift etc., complete.

Supplying and filling at 110mm dia, best quality ventilating shaft 3.65m height with PVC cowl at top and fixing in poistion inlcuding cost of all materials, curing labour, leads and lits etc., complete.

Supplying and filling with 40mm HBG metal in dispersion trench, rain water harvesting pit including cost of metal, all labour, lead,lift, consolidation etc. complete.

Supplying and Laying of 110 mm dia. PVC pipe (6Kg/Cm2) for Sewage line from Septic Tank to Dispersion Trench including cost of all materials, labour, lead, lift etc., complete.

Supplying Godrej Navtal lock of approved type with 6 livers including cost of locks with three keys leads, lead etc., complete.

Supplying and Fixing of Floor Trap Floor Trap 100 X 75 mm in size for Bath room including cost of materials, lead, lift etc., complete.

Supplying and fixing white / Colour glazed earthen ware wash basin of size 550 X 440 mm in size reputed make with Gate valve including cost of all fitting materials lead lift Transporting labour charges etc., complete.

Supplying and fixing of Best quality of Mirror 600 X 450 mm in size with soap tray, Towel rod over hand Wash basin,Plastic bucket ,mug, Dust Bin and floor mat, etc.,complete.

Outer colour washing with two coats using ready mixed Weather Proof Exterior Emulsion (First quality - Apex or its equivalent) of approved quality and colour over a coat of exterior emulsion water based primer exterior surfaces including through scrapping, clan removal of dirt, cost of all materials, scaffolding, Labour, Lead, Lift etc., complete and including necessary crack filling paste, putty whereever required.

Colour washing with two coats ofinside wall using interior emulsion paint over a primer one coat and two coat of wall putty f Wall Putty paste of approved quality interior walls smootheing by scrapping with nice sand paper for interior surfaces as directed by the engineer at site including cost of all materials such as Oil bound distemper, Wall Putty paste, Primer and scaffolding, Labour, Lead, Lift etc., complete.

Painting with 2 coats of using emulsion paint over primercoat with white colour for Interior ceiling surface including cost of all materials, labour, lead, lift, brush, etc., complete.

Painting 2 coats of Acid Proof Paint over 1 coat of Cement Primer including cost of all materials, labour, lead, lift etc., complete.

Supplying and fixing of 40 mm PVC pipes (10 kg/cm2) with ISI make for water supply arrangements including cost of pipe, bend, Tee, elbow, reducer etc., as required of all materials,lead,lift,labour charges etc.,complete

Supplying and fixing of 25 mm PVC pipes (10 kg/cm2) with ISI make for water supply arrangements including cost of pipe, bend, Tee, elbow, reducer etc., as required of all materials,lead,lift,labour charges etc.,complete

Supplying and fixing of 20 mm PVC pipes (10 kg/cm2) with ISI make for water supply arrangements including cost of pipe, bend, Tee, elbow, reducer etc., as required of all materials,lead,lift,labour charges etc.,complete

Providing and fixing 15 mm C.P.Pillar cock for water supply tap with angle stand including cost of pipe and labour fixing charges lead, lift etc., complete.

Supplying & fixing of Heavy duty GM Gate Valve 40mm with ISI make for PVC water Supply arrangements including cost of Pipe, Bend, Tee, l - Bow, reducer etc., as required of all mateials, lead, lift , Labour charges ete. Complete.

Supplying & fixing of Heavy duty GM Gate Valve 25mm with ISI make for PVC water Supply arrangements including cost of Pipe, Bend, Tee, l - Bow, reducer etc., as required of all mateials, lead, lift , Labour charges ete. Complete.

Supplying and fixing GI angle size of (50mmx50mmx6mm) fixing at 600 m C/c for cable duct inside the control room including all labour,lead,lift etc.,complete.

Supplying and Laying of 110 mm dia (4 Kg/cm2) PVC pipe for Rain water fall pipe including cost of all materials, labourm lead, lift etc., complete.

Supplying and fixing of CI man hole cover heavy duty of approval quality size 600 x 600 mm to cover the man hole including cost of all materials, lead, and lift, etc., complete.

Supplying and fixing of double side Polished Cudappah Slab 20/30mm thick for Shelves rack including cost of all materials, Labour, lead, lift etc., as per standard Specification complete.

Supplying and fixing of 1000 Liters PVC water tank (white coated) of approved quality with ISI mark including cost of all materials labour for connection , lead, lift etc., complete, as per standard specification

Charges for geophysical survey for investigation of bore well point at various point in the SS site and to fix the maximum yield point with necessary instrument including labour lead,lift,etc,complete

Drilling of 150 mm dia. Bore well upto 200m in all classes of soil using Power drilling machine including transporting of drilling machine, fixing in position including all labour, lead, lift etc., complete.

Drilling of 150 mm dia. Bore well above 200m in all classes of soil using Power drilling machine including transporting of drilling machine, fixing in position including all alabour, lead, lift etc., complete.

Supplying and fixing of 180 mm dia. PVC casing pipe of best quality by ISI make of heavy duty and suitable for 150 mm dia. Bore well including cost of all materials, lead, lift, fixing charges etc., complete.

Supplying and fixing of 20 mm dia. HDPF pipe best quality by ISI make of 10 Kg / cm 2 Pressure and suitable for 150 mm dia. Bore well including cost of all materials, lead, lift, fixing charges etc., complete.

Supplying and fixing of 40 mm dia. HDPF pipe best quality by ISI make of 10 Kg / cm 2 Pressure and suitable for 150 mm dia. Bore well including cost of all materials, lead, lift, fixing charges etc., complete.

Supplying and fixing of 12/15 mm dia. " B " class GI pipe best quality by ISI make including cost of all materials, lead, lift, fixing charges etc., complete.

Supplying and fixing of 160 mm dia. PVC End cap of best quality by ISI make suitable for 150 mm dia. Bore well including cost of all materials, lead, lift, fixing charges etc., complete.

Supplying and fixing of 20 mm dia. MS Collar for Air Hose pipe of best quality by ISI make suitable for 150 mm dia. Bore well including cost of all materials, lead, lift, fixing charges etc., complete.

Supplying and fixing of 40 mm dia. MS Collar for Air Hose pipe of best quality by ISI make suitable for 150 mm dia. Bore well including cost of all materials, lead, lift, fixing charges etc., complete.

Supplying and fixing of 50 mm dia. GI Elbow for Water connection of best quality by ISI make suitable for 150 mm dia. Bore well including cost of all materials, lead, lift, fixing charges etc., complete.

Supplying and fixing of 50 mm dia. GI Union for Water connection of best quality by ISI make suitable for 150 mm dia. Bore well including cost of all materials, lead, lift, fixing charges etc., complete.

Supplying and Fixing of 1 No. GI cover Box to required size for accommodate the Temporarily supply Meter & Main Board with nececessary clamps etc., complete.

Supplying and erection of 7.5 HP capacity ELGI make Bore Well Compressure Pump with STD accessories with Suguna or TEXMO Motor 7.5 HP, 3 phase 1440 RPM TEFC - a class Motor BCH Starter (L&T make) icluding cost of all materials such as CW Board suitable for fixing starter etc., Indiacator bulb, switch Holders, Earth plate, IC unit and Aerial carrier and PVC copper wire reputed make for wiring labour, lead and fixing charge etc., complete.

supply and erection of 2 HP Monoblock pump for sump to drain out water including cost of suitable GI suction and delievery pipes, cover for motor, wiring, all labour, lead, and lift etc., complete.

Suppling and run of 1.5 sq mm (22/.3) PVC inslated multistand unsheathed copper conductor or 1100 V grade (SD 53)

Supplying and fixing of ISI make 4 way Triple pole and natural MCB Distribution Board with 1 No. 6 to 32 Amps DP IC Switch of 500V, As incoming 6 Nos. 6 to 32 Amps SPMCB out going necessary flush with wall and making good of cancelled portion with earthing as per PWD standard arrangement.

Wiring with 1.50 sq mm PVC unsheathed multistrand copper cable of 650 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall and covering with 3mm thick hylum sheet over TW switch box with continuous earth wire connection 14 SWG TC wire and making good the damaged portion of masonry for PVC concealed light point.

Wring with 1.50 Sq mm PVC unsheathed multistrand copper cables of 650V Grade in Suitable PVC regid pipe concealed in wall and ceiling with PVC accessories in flush with wall using suitable TW switch box with 3mm tick hylum sheet covers for 5 A 3 pin non inter locking CS plug including pin top with continuous earth wire connection using 14 SWG TC wire and making good the damaged portion of masonry of PVC concealed plug point.

Wring with 4.00 Sq mm PVC unsheathed multistrand copper cables of 650V Grade in Suitable PVC regid pipe concealed in wall and ceiling with PVC accessories in flush with wall using suitable TW switch box with 3mm tick hylum sheet covers for 15 A 3 pin non inter locking CS plug including pin top with continuous earth wire connection using 14 SWG TC wire and making good the damaged portion of masonry of PVC concealed plug point.

Supplying and fixing of Slanding Holder with LED 14W Bulb with ISI approved quality including cost of all materials, labour, lead, lift etc, complete.

Supplying and fixing of Twin type Decorative type Led Tube 4' 16W fittings with Copper choke & slim type LED tube and fittings complete with ISI mark, electronic choke and condenser with conduit type suspension from ceiling with PVC unsheathed leads from terminal to the fittings with tube including cost of all materials, lead, lift, fixing charges etc., complete.

Supplying and fixing of 4’ 20W single LED Tube light and fittings complete with ISI mark, electronic choke and condenser with conduit type with PVC unsheathed leads from terminal to the fittings with tube including cost of all materials, lead, lift, fixing charges etc., complete.

Supplying and fixing 1200mm (48") swap AC ceiling fan with 600mm down rod with approved best quality make of standard specification with electronic regulators and switch, including cost of all materials Labour fixing charges etc., complete.

Supplying and fixing of 450 mm AC Sweap AC Exhaust Fan Heavy duty including Providing necessary hole in wall, fixing charges, lead, lift etc., complete.

Supplying and fixing of single box Street light type with LED 30 W light fittings with ISI markwith GI pipe stand pipe for exterior light unsheathed leads from terminal to the fittings with tube including cost of all materials, lead, lift, fixing charges etc., complete.

Supply and fixing of fancy glass shade and 11 W LED for BH point including cost of all materials, lead, lift, fixing charges etc., complete.(SD 80)

Supply and fixing of W.T bulk head fitting (Philips / Bajaj / K.Lite / Crompton Greaves) suitable for LED lamp with guard and 1No 11 W LED bulb including cost of all materials, lead, lift, fixing charges etc., complete.

Supplying and fixing of Earthing with Electrode of 2 mtr. class B GI Pipe less than 32 mm dia. complete.

Supplying and fixing of 32 Amps 3 phase DPIC Main Switch of approved ISI make with suitable board, clamp etc., including cost of all materials, labour, lead, lift etc., complete.

Providing 3 Phase Service connection by using with 7/20 Copper cable of from EB Post to Meter Board complete.

Providing 32 Amps 3 Phase Aerial fuse connections complete.

Labour charges for writing Name Board/Slogans over the plastered surface wall in the control room including cost of paint & all materials, labour, lead, lift, etc. complete, as per standard specification.

Supplying & stick the TNEB Embelem in front of control room entrance door including cost, lead, lift, etc. complete, as per standard specification.

Supplying of steel executive table of TANSI make or equivalent as per standardspecification 54"x0"30" including the cost of steel table , labour chrges, transporting charges, lead, lift etc., complete.

Supplying of steel executive table of TANSI make or equivalent as per standardspecification 54"x0"30" including the cost of steel table , labour chrges, transporting charges, lead, lift etc., complete.

SGST & CGST (If applicable quote the value, if not enter '0')

IGST (If applicable quote the value, if not enter '0')

K.S.MANJU (BID ID -1397694)

C.PERIYASAMY (BID ID -1396116)

MANICKAVASAGAM (BID ID -1391249)

C.GOVINDAN (BID ID -1397832)

mk constructions (BID ID -1393220)

Vidhyut Nirman Corporation (BID ID -1392603)