Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹29.9 Cr
EMD Value
₹30 L
Closing Date
20 Jun 2023, 11:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka Power Corporation Limited
Sowmya S
Design, Modification, Manufacturing, Supplying and erecting PVC fills and its supporting structure of NDCT of Unit no-3 of BTPS at Kudathini in BALLARI-Dist, KARNATAKA-State. Call-2
KPCL/2023-24/PS/WORK_INDENT20
KPCL/2023-24/PS/WORK_INDENT20
Open
Power stations
Two Tender Document System(Two Cover)
KPCL Superintending Engineer C two Office BTPS Bellary
12 documents required · 12 mandatory
Individual / Partners of JV should have satisfactorily completed (at-least 90% of the contract value) as a prime contractor , at least one similar nature of work such as Design and Construction of Natural draft Cooling Tower / Induced draft Cooling tower of Capacity 210 MW or above in Thermal power plant single OR multiple works having done Repair and rectification of the existing supporting structure , fills of value collectively not less than Rs.1497.00 Lakhs during the preceding Ten financial years i.e. 2012-13, 2013-14, 2014-15, 2015-16, 2016-17, 2017-18, 2018-19, 2019-20, 2020-21 and 2021-22. Each partner of the JV shall have carried out minimum value of similar nature of work not less than Rs.500.00 Lakhs and must have completed in any of the preceding Ten years for evaluation. The work done certificate issued by an officer not below the rank of Chief Engineer in case of KPCL works and not below the rank of Executive Engineer/ Competent Authority in case of State / Central Government / Government under taking/Public Sector Undertaking/Private thermal power station in India as the case may be furnished. (Work done of previous years shall be given a weightage of 10% per year to bring them to the present price level).
Assessed available tender capacity (AxNx1.5-B) should be greater than the amount put to tender, were, A - Maximum value of works executed in any one year during the last five years (updated to 2022-23) price level taking into account the completed as well as works in progress. N - Number of years prescribed for completion of the works for which tenders are invited for 18 Months. B - Value of existing commitments and on-going works to be completed during the next 18.00 Months (1.5 year).
The Intending Individual Contractors/ JV (Collectively) should have achieved at least in two financial years a minimum financial turnover of Rs.59.88 Crore during the previous Ten financial years (2012-13, 2013-14, 2014-15, 2015-16, 2016-17, 2017-18, 2018-19, 2019-20, 2020-21 & 2021-22). The bidder/all JV members shall submit certified copy of Turnover and Profit and Loss account certificate duly certified by the chartered accountant shall be uploaded along with the technical bid. (Financial turnover of previous years shall be given weightage of 10% per year to bring them to the present price level).
Scanned Copy of PAN Card should be uploaded.
Scanned Copy of PF registration certificate should be uploaded.
Scanned Copy of GST registration certificate should be uploaded.
DECLARATION: (Declaration to be given by the Tenderer at the time of submission of the completed Tender): Name of work: Design, Modification, manufacturing, supplying and erecting PVC fills and its supporting structure of NDCT of Unit no.3 of BTPS.at Kudthini in BALLARY,KARNATAKA (State). (1).I/We hereby undertake to comply with the provisions of Provident fund Act and have furnished the PF account Number. 2.I/We have not been debarred from tendering for Govt./Private projects in India by any authority during last three years.3.The tender submitted has no conditions contravening the technical & commercial conditions of the tender.4.I/We declare & acknowledge before the submission of this tender, that EMD has not been forfeited and none of our contracts have been terminated/foreclosed on account of our default in KPCL or elsewhere during the past Three(3) years.5.I/We have studied the site conditions, labour conditions and read the tender documents and related matters carefully and diligently and have submitted the Tender having studied, understood and accepted the full implications of the tender document.6.The requirements of Tender document as stated will be fulfilled by me to the satisfaction of the Engineer in Charge. BIDDER
Availability by owning at least 50% of the required/specified key and critical equipment and the remaining 50% can be deployed on lease/hire basis (the relevant documents like commitment agreements etc. shall be furnished for this work. i. Gluing machine - 5 Nos ii. Hydra - 1No iii. Seizer lift - 2 Nos
Duly filled qualification information as per section-3 along with supporting documents
The intending tenderer executed in any one year of last ten financial years i.e., 2012-13 to 2021-22, the following minimum quantity of work. Supply and Erection of 6500Cum of PVC fills in NDCT/IDCT with suitable high strength, durable & chemical resistant material as supporting structure and other accessories required to complete the work either by new construction or by restoration work.
Individual-class I or equivalent to class-I contractor registered in State Government / Central Government / registered firms /companies / any under taking companies are eligible to apply. Or Joint venture (JV): JV (Comprising maximum 3 partners) Lead partner should be Class-I or equivalent to class-I registered contractor & Other partners should be class II & above registered contractors in State Government / Central Government / any Government undertaking are eligible to apply
Liquid assets and /or availability of credit facilities of not less than Rs.7.00 Crore. Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc. liquid asset shall be furnished only for lead partner.
₹7,500
₹30 L
9 Jun 2023
9 Jun 2023
22 Jun 2023
15 Jun 2023
16 Jun 2023
Design, Modification, Manufacturing, Supplying and erecting PVC fills and its supporting structure of NDCT of Unit no-3 of BTPS at Kudathini in BALLARI-Dist, KARNATAKA-State. Call-2
Designing, modification, manufacturing, supplying of PVC fills, The fill sheet indigenously manufactured confirming to CTI STD-136, of thickness 0.30mm thk, Flute size of 19mm(T1-19), depth of fill sh...
Removing the existing Drift eliminators and replacing the same after erecting fills and its supporting structures. Dismantling of existing PVC fills and its supporting structures and transporting to d...
Supplying and fixing C-shape PVC Drift eliminators without damaging the adjoining structures, as per the specifications, including cost of tools, tackles and accessories, safety gadgets, labour and ma...
Supplying and fixing of Nozzles without damaging the adjoining structures, as per the specifications, including cost of tools, tackles and accessories, safety gadgets, labour and machineries etc., com...
Dewatering cooling tower water pond and fore bay channel of unit-3 by using diesel pumps of required capacity including DPOL & crew with all lead and lifts etc., complete and as directed by the Engine...
Removing silt and slush from pond floor of NDCT at BTPS under wet/dry condition by mechnical means/manually including multiple handling wherever necessary and disposing of the same as per direction of...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
JV format.docx
Others - Joint venture format • 0.02 MB
Bid Document NDCT-3.docx
Tender Document • 0.86 MB
Drawings.zip
Others - Drawings • 2.47 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .