Up-gradation and Special repair of Fire Fighting System at IAF Centre, U.T. Press Building Sector 18, Chandigarh

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. DSR 2.27

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : DSR 4.1

1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size). DSR 4.1.3

1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size drived from natural sources) DSR 4.1.10

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) : (DSR 6.4)

Cement mortar 1:6 (1 cement : 6 coarse sand) (DSR 6.4.2)

12 mm cement plaster of mix : (DSR 13.1)

1:4 (1 cement: 4 fine sand) (DSR 13.1.1)

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.

Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. (Exposed on wall) (DSR 18.10)

32 mm dia. nominal bore : DSR 18.10.4

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : DSR 18.46

32 mm nominal bore : DSR 18.46.4

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : (DSR 18.17)

32 mm nominal bore (DSR 18.17.2)

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

FIRE FIGHTING SYSTEM

Supplying, installation, testing and commissioning of electric driven terrace pump conforming to IS 12469: 2019 suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) (b) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal as required. (c) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class- 'F' insulation, conforming to IS-12615: 2018. (d) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. (e) Suitable cement concrete foundation duly plastered and with anti vibration pads.

450 lpm at 35 m Head

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required

25mm dia

32mm dia

50mm dia

80mm dia

100 mm dia

150 mm dia

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :

50mm dia

80mm dia

100mm dia

150mm dia

Supplying, installing, testing and commissioning of C.I. Dual Plate Wafer type Non-return Valves PN 16 with SS 304 discs with Nitrile rubber lining as per with required flanges, nuts, bolts and gaskets etc. complete.

80mm dia

150 mm dia

100mm dia

Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required ::

Single headed Stainless steel

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :

Stainless Steel (Grade 304)

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required.

20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585

20 mm nominal internal dia gun metal globe valve & nozzle.

Drum and brackets for fixing the equipmets on wall.

Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.

Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :

Stainless Steel (Grade 304)

Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories :

Pendent Sprinkler

Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required :

80mm dia

HOSE CABINET FOR 15 MTR. LONG HOSE REEL PIPE & BRANCH PIPE ETC.

Providing and fixing of HOSE CABINET of Size: (600mm x 600mm x 450mm) made of 16 gauge MS sheet with 4mmthick glazed glass door i/c necessary locking arrangement suitable to accommodate 15 mtr. long hose reel pipe & branch pipe mounted on wall or raised bric platform & duly painted with Post office red externally and white internally with synthetic enamel paint complete in all respect as required.

Providing and Fixing of ABC (Power type) ABC FIRE EXTINGUISHER/ 4 kg HP Mild Steel Cylinders ISI marked approved fitted with pressure indicating gauge capacity complete with discharge horn and mounting it on the wall with a suitable MS bracket (including S/F bracket) minor civil works etc. complete as required.

Supplying and installing of 3 nos set of Fire Buckets of 24 gauge galvanized steel sheet, standard 9 liter capacity and of round bottom shape, painted white inside and red outside and black on the bottom, inscribed with letters "Fire " in black and gold.

Providing and fixing Carbon-di-oxide fire extinguishers consisting of welded M.S cylindrical body, squeeze lever discharge valve fitted with internal discharge tube, 30cms long high pressure discharge hose, discharge nozzle, suspension bracket, confirming to IS : 15683 finished externally with red enamel paint and fixed to wall with brackets with rawl plug/dash fasteners complete with internal charge. Capacity 4.5 kg. ISI Marked.( Contractor should submit test certificate form manufacturer along with serial number of every extinguishers supplied.)

Supplying, installing, testing and commissioning of Copper Conductor Cables, XLPE Insulated, unarmoured IS 7098 (Part 1) marked of approved make Havells, Finolex, Polycab to the satisfaction of EIC

3.5 Core x 25 Sqmm

2C x 1.5 Sqmm

Providing and fixing dial type pressure gauge with isolation cock and copper pipe at hydrant station. Make:H.Guru/ Fiebig/ Dwyer

Painting of Fire Hydrant/Sprinklar pipeline of different sizes installed inside/outside with two or more coats of painting with synthetic enamel paint to give an any shade, including cleaning of surface with detergent etc.

25 mm dia

80 mm dia

100 mm dia

150 mm dia

Providing and fixing of flood light of 60/70 Watt make Havells /Crompton phillips etc.

Providing and fixing of LED tube light of 20 Watt make Havells /Crompton phillips etc.

Repair and service of 80 KVA deisel engine pump and repalcement of fuel filter /oil filer/ Air filter and lubricate oil complete

Providing and fixing of battery charger 10 Amp. Of 12 Volt DC complete in all respects.

Repair of control panel with main swicths, wiring & other allied works complete in all respect

Detection of leakage and repair in hydrant/sprinkler MS pipe line including cost of repair of MS pipe line for leakage with welding work, testing for pressure and refilling of excavation soil to its original portion complete including cost of welding rods T&P to entire satisfaction of EIC.

Repair of Hose Pipe/Reel drum including welding & washers.

Providing and applying one coat of 4mm thick 'PYPKOTE' or COATEK anti rust pipe rotection including approved primer of 2 coats as per manufacturers specifications and lap of 25 mm to make an impermeable layer on MS pipes in trenches or on structural/masonry members complete.

100 mm dia

150 mm dia

Providing and Fixing of laminated sign board material for indication of Sign board at UGR complete in all respect as per the satisfaction of Engineer in charge: (NSI)( Size 24" x 24")

Refilling of portable fire extinguisher ABC dry powder stored pressure type filled with Mono Amonoum phosphate 70% (IS4609) capacity 6kg BIS 15683-2006 marked complete with pipe and clamp etc. of approved make

Refilling of Carbon Dioxide fire extinguisher portable type capacity 4.5kg suitable for B and C class of fire, BIS 15683 marked CCOE & PESO approved with 1 mtr hose horn complete of approved make

Please Enable Macros to View BoQ information