REPAIR TO FENCING, HARDSTANDING, AND OTHER CONNECTED WORKS OF CERTAIN PLACES IN SMQs, OTM, DSC, NC, MES QTRS IN 01 DOMESTIC AREA AT AIR FORCE STATION PATHANKOT

Amount

Material and labour for brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in cm 1:6 including demolition of existing brick work complete all as specified and directed by Engineer-in-Charge.

All as above item No 01 above, But except bricks complete all as specified and directed by Engineer-in-Charge.

Material and labour for reinforced cement concrete (nominal mix) 1:2:4 (12.5 mm graded aggregate), type B-0 (using 12.50mm graded crushed stone aggregates as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like including form work and demolition the existing complete all as specified and directed by Engineer-in-Charge.

Material and labour for Form work to soffits of beam and shelves and like flat rough finished complete all as specified and directed by Engineer-in-Charge.

Material and labour for Form work to edges of concrete flat rough finished thickness and not exc 20cm thick complete all as specified and directed by Engineer-in-Charge.

Material and labour for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to Fe-310-O or Fe-410-O complete all as specified and directed by Engineer-in-Charge.

Rendering 15mm thick cement plaster in cement mortar 1:4 on bricks or concrete surfaces, finishing the surface even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Rendering 15mm thick cement plaster in cement mortar 1:4 on bricks or concrete surfaces, finishing the surface even and smooth without using extra cement includig taking down existing plaster with two coat of exterior emulsion paint over a coat of primer on new surface complete all as specified and directed by Engineer-in-Charge. Note : Rate of form work if required to be included in the rat quoted by the contractor and no extra payment shall be made on this account.

Rendering 15mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair without using extra cement, including taking down existing plaster with two coats of OBD of any tint over a coat of primer complete all as specified and directed by Engineer-in-Charge.

Material and labour for applying 3mm thick wall care putty on wall surfaces complete all as specified and directed by Engineer-in-Charge.

Rendering dubbing coat over damaged irregular surface of patches at colms,chajjas,canopy and soffits, roof projections, ceiling facia etc using GI chikrn mess of size 0.25mm thick and 20 mm aperature fixed with nails including necessary scaffolding arrangement as required at site average 15mm thick in cm 1:4 over cement slurry coat thick @ 3 Kg/sqm making the surface even followed by 5mm thick rendering in CM 1:3 furnished even& smooth including applying two coats of weather proof emultion paint incl making of drip course as reqd complete incl roughening surface of old concrete by picking sweeping clean and washing with water all as specified. Note :Rate for form work if reqd to be incl in the rate quaoted by the contractor. rate will also include removing any other obstruction made of honeybee nest etc.

Material and labour for Cement concrete 1:3:6 type C-2 (using 40mm graded agg) as in plinth, 75 mm thick and finished even and smooth without using extra cement, including demolition of existing cement concret complete all as specified and directed by Engineer-in-Charge.

Material and labour for 40mm thick Cement concrete 1:2:4 type B-1 (using 20mm graded agg) as in Floor, finished even and smooth without using extra cement, including demolition of existing cement concrete complete all as specified and directed by Engineer-in-Charge.

Material and labour for non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:4 and dismantling/demolition on existing surface complete all as specified and directed by Engineer-in-Charge.

Material and labour for light shade vitrified tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:4 and dismantling/demolition on existing surface complete all as specified and directed by Engineer-in-Charge.

Material and labour for Machine cut kota stone slab 18-20mm thick as in flooring, over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 15mm thick cement screed bed in cement mortor 1:4 and dismantling existing floor complete all as specified and directed by Engineer-in-Charge.

Material and labour for glazed ceramic coloured tiles of size 450 x 300 x 7mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:4 and dismantling existing floor tiling complete all as specified and directed by Engineer-in-Charge.

Material and labour for Granite (of any type), 18- 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platform and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixer of pigment to match with marble shade including making full curving the edges and dismantling existing floor complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of rotational moulded polyethylene water storage tank of capacity 500 litres, (cylindrical vertical one piece moulded with closed top),hoisted and fixed in position etc complete including dismantling existing water tank complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of rotational moulded polyethylene water storage tank of capacity 1000 litres, (cylindrical vertical one piece moulded with closed top),hoisted and fixed in position etc complete including dismantling existing water tank complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair 15mm bore tubes Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc any type of pipe all incl taking down existing tubing complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No 20 here-in-before, but fixing only complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair 20mm bore tubes Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc any type of pipe all incl taking down existing tubing complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No 22 here-in-before, but fixing only complete all as specified and directed by Engineer-in-Charge.

Material and labour for cutting chases pinning in brick work for concealing water tubing and making good to facing where required and pointing in cement motar 1:3, cutting n.exc. 10cm girth complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair vetreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest ( excluding flushing cistern and flush pipe), including long Arm P/S trap (PVC) 100 mm dia of lenght up to 700 mm or as per site requirement complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs Vitreous China wash down water closet pan (pedestel pattern) white,including trap connection to drain (outgoing pipe) and to flushing pipe, antisyphonage pipe, PVC jet for Pedestal pattern pan including 450/600mm long PVC connection and plastic water closet seat of white in colour,back closed pattern with flat bottom,and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair vitreous china wash hand basin white of bowl size 550 x 440mm including waste coupling and PVC waste pipe, 32mm dia, 15 mm dia bore pipe pillar tap cast copper alloy with capstan heads chromium plated fancy to be fixed in MS brackets (where required) complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair 10 ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float ovel handle incl brackets and PVC flushing pipe of polyethylene of low or high density or PVC 32mm dia complete all as specified and directed by Engineer-in-Charge.

Supply and fixing PVC connection 15mm bore size with two nuts and key and washers of length 450mm complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Cabinet mirror plastic body of size 350x450mm with 4mm thick looking mirror complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including 32mm dia waste pipe and CP grating and bedding in cement mortar to dwarf wall or including fixing cantilever brackets (where required) overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including 32mm dia waste pipe and CP grating and bedding in cement mortar to dwarf wall or demolition of existing cemented/marble kitchen sink and making good with providing Marble strip as reqd Note : Marble will be measured and paid separately. Overall size of sink 610 x460mm and bowl size 550 x400mm complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement stainless steel plate rack of size 900mm X 900mm X 250 mm complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair bib taps cast copper alloy ISI marked with crutch or butter fly handle high pressure screwed down screwed for iron pipe of 15mm bore complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs bib taps suitable for 15mm bore pipe long body fancy type brass CP with, Capstan head screwed down screwed for iron pipe or brass ferrule complete fixed in repair complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement stop valve/angle valve chromium plated with long shank concealed type cast copper alloy ISI marked with crutch or butter fly handle high pressure screwed down complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair 15mm stop valve cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair 15mm PTMT stop valve high pressure screwed both ends for iron pipe or for unions complete all as specified and directed by Engineer-in-Charge.

Material and labour PCC 1:4:8, type D-2, (using 40mm graded crushed stone aggregate) in foundation filling and mass concrete, (as in sunken floor) with spout pipe 50 mm dia up to 600 mm long or as per site requirement including demolition of existing surface complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Doctor fixit Pidifin 2k high performance 2 component flexible Acrylic polymer modify cement base water proofing coating in two coat 1mm thick dry film mixed in ratio 2:1 by weight or 1.5:1 by volume product of M/S Pidilite Industry Limited Makers of Fevicol adhesive brand

Supply and fixing in replacement 100mm/75mm bore cast iron floor trap with CP grating including jointing to waste pipe fixed in cement concrete type B-1, 1:2:4, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing grating round 100mm/75 mm size of CP complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 100mm bore sand cast iron soil waste and vent pipe ISI marked in any length with or without ears with lead joints laid in floor/walls complete all as specified and directed by Engineer-in-Charge.

All as above item No 44 here in before but 75mm bore complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 100mm dia cast iron bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 75mm dia cast iron bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed by Engineer-in-Charge.

Supply and fixing, 100mm dia, branch pieces, single (equal or unequal) ordinery or inverted (spigot or socket type) or with parallel branches complete all as specified and directed by Engineer-in-Charge.

Supply and fixing, 75mm dia, branch pieces, single (equal or unequal) ordinery or inverted (spigot or socket type) or with parallel branches complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair 110mm bore PVC(SWR) pipes single socketed, in any length laid in trenchs or in floor complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair 110mm bore PVC(SWR) pipes single socketed, in any length fixed to walls complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair 110mm bore PVC(SWR) bends complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair 110mm bore PVC(SWR) single T complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair 75mm dia PVC(SWR) floor trap, plain with PVC grating including jointing with solvent cement complete all as specified and directed by Engineer-in-Charge.

Removing of vegetation / plantation on the wall/ roof/ any position of up to double storey building including necessary scaffolding upto 6 m height and roots superfacial area n.exc 2 sqm each and making good of surface by applying chemical treatment with GLYPHOSATE 41% including removing /refixing of CI/GI pipe lines complete all as specified and directed by Engineer-in-Charge. Note : Brick work, plaster and CI/GI pipe lines shall be measured and paid separately.

Supply and fixing in repair GI spout pipe medium weight 50mm bore dia of length 450mm set in PCC 1:4:8 porous concrete and make the external portion with CM 1:3 with and including water proofing @ 200 ML per bag complete all as specified and directed by Engineer-in-Charge.

Supply and fixing factory made solid PVC door frame of size 50mmx47mm made out of 5mm plain colour sheet reinforcement with MS square tube. All as specified . in built fixed to wall with CSK screw 100 mm long, screw holding strength of PVC frame Shall be 200 Kgf ,fixing shall be done with anchor screw ( 150 mm x 8mm) with PVC Nylone SLEEVE fixed with screw including taking down with existing one complete all as specified and directed by Engineer-in-Charge. NOTE:- During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster ,similar wall tile,floor tile etc and as per site requirement.

Supply and fixing factory made PVC Flush door of 33 to 35 mm thick overall thickness comprising of 19 SWG MS tube of size 19 x 19 mm (19 gauge) covered with 7 mm Thick Prelame any design ( As approved) Coloured Sheet on Both Side. Core shall be filled with 19 mm to 20 mm thick PVC solide Board , including taking down with existing one complete all as specified complete all as specified and directed by Engineer-in-Charge. NOTE :- All screws shall be self tapping chrome plated all as specified

Supply and fixing 100mm long (12Gauge) butt hinges stainless steel anodised and fixed complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Stainless steel Tower Bolt of 150 mm long fixed with Self Tapping screws complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Stainless steel Handel of 125 mm long fixed with Self Tapping screws complete all as specified and directed by Engineer-in-Charge.

Taking down shutters of any description of size exc 1 Sqm and not exc 2 Sqm and easing, adjusting, refixing builder hardware as required including renewal of unserviceable screw, etc and refixing in same opening as required at site complete all as specified and directed by Engineer-in-Charge.

Supply and fixing PVC lid for poly water storage tanks of capacity 500/1000 litres including PVC hinges and PVC locking both complete all as specified and directed by Engineer-in-Charge.

Cleaning and removing all scale and dirt etc from tanks and mouth of circulating pipe incl disconnecting existing tanks and refixing in position after cleaning for exc 250 & n.exc 500 litres capacity of tank including writing date of cleaning on tank by synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

Cleaning and removing all scale and dirt etc from tanks and mouth of circulating pipe incl disconnecting existing tanks and refixing in position after cleaning for exc 500 & n.exc 1000 litres capacity of tank including writing date of cleaning on tank by synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation board/slab/blankets, any thickness, including cover fillets complete all as specified and directed by Engineer-in-Charge.

Material and labour Position suspended false ceiling system using T-grid suspended ceiling grid system. The size of grid shall be 600 x 600mm with GI frame work main runner 38 x 24mm x 3600 mm, cross tee 25 x 24 x 600mm / 25 x 24 x 1200mm and wall angle 24 x 24 x 2540mm ( thickness of the material of 0.30 mm), using 9mm thick ceiling panel laminated with PVC film on front face and foil back available in due drop texture as per IS-2095, part-I-1996, fixed in the grid of T-grid suspended ceiling grid system duly suspended by 4mm dig GI bar hanger from the purlins of the roof with butter fly clips complete all as specified and directed by Engineer-in-Charge.

Supply and fixing solid PVC wall lining consisting of 5 mm thick single side prelem PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 5 mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specifications complete all as specified and directed by Engineer-in-Charge.

Material and labour for re-fixing of CP grating of floor trap of any size and type, applying white cement in gaps of wash basin, sink, gratings, urinals, and the like not otherwise specified joints and making good the surface complete all as specified and directed by Engineer-in-Charge. Note: Each job contain of minimum 05 Nos of re-fixing of graiting and cement filling of 05 Nos of gap filling.

Supply and fixing in repair chromium plated shower roses with or without swivel joints any size including fixing to steel pipe or union complete all as specified and directed by Engineer-in-Charge.

Demolition of brick work stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete of any desription and in any position not otherwise specifically provided for complete all as specified and directed by Engineer-in-Charge.

Material and labour for PCC (1:4:8) type D2 (using 40 mm graded stone aggtegate) as in foundation filling and mass concrete complete all as specified and directed by Engineer-in-Charge.

Material and labour for PCC (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) as in coping, and similar work complete all as specified and directed by Engineer-in-Charge.

Extra for forming fair finished drain or channel 30 Cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for 20 mm sand filling under interlocking tiles complete all as specified and directed by Engineer-in-Charge.

Material and labour for 60 mm thick Machine pressed coloured precast cement concrete interlocking paver block any shape and sizs as directed, confirming to IS 15658-2006, M-35 Grade as in floor etc. set and levelled in proper grade and intersects to be filled with sands free from any foreign material including dismantling existing tiles complete all as specified and directed by Engineer-in-Charge. Note: Colour, design/pattern to be approved by the Engr-in-Charge before bulk procurment.

All as per item No 78 above but except tile complete all as specified and directed by Engineer-in-Charge.

Material and labour for designer coloured paver tiles of size 300 x 300 x 25 mm thick or equivalent size as in machine pressed set, jointed in neat cement slurry over and including sereed bed 20 mm thick in CM (1:6) complete incl dismantling existing tiles complete all as specified and directed by Engineer-in-Charge. Note: Colour, design/pattern to be approved by the Engr-in-Charge before bulk procurment.

Material and labour for filleting in any position and to any shape in PCC 1:2:4 including all mitres, stops, etc exc 25 but n exc 50 Sq cm complete all as specified and directed by Engineer-in-Charge.

Dismantling wrought iron or mild steel works of any description complete all as specified and directed by Engineer-in-Charge.

Excavation in post holes (or similar holes) each n. exc 0.5 cu.m, getting out, returning filling in and well ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm, watering and removing surplus soil to a distance n exc 50 m and making good surface in hard / dense soil complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Mild steel fencing posts and struts in fencing including cutting bending top to shape as directed drilling holes matching for barbed wire and all necessary drilling work complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Chain link fencing using 4mm dia GI wire 75x75mm mesh (weight not less then 4 Kg/ Sqm) including line wires, any mesh, size & type to any type of standards, rails, straining bolts, etc. including provision of binding wire and dismantling of existing chainlink fencing complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 12 mm dia round TMT bars cut to length bent to shape for stifners etc and similar work complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Flat iron including fixing clamps or support to chain link fencing etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Mild steel screw bolts (machine made) 5 to 10mm dia of shank with hexagonal or square heads at one end and screwed the other, each screw end to be fitted with washers and one hexagonal or square nut exc 5cm but n exc 10cm long complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings & straining and fixing to any type of post including screwing or tying at crossings with and provision of galvanised mild steel wire, staples as directed including taking out existing damaged barbed wire complete all as specified and directed by Engineer-in-Charge.

Removing of old building materials setteled at places, including cleaning the area by manually/ mechanically means incl loading/ unloading complete etc (other than spoil) to a distance of 5.00 Km complete all as specified and directed by Engineer-in-Charge.

Material and labour preparation of new or previously untreated steel surfaces of any description and in any situation over 10 cm width or grith and applying two coats of synathetic enamel paint over a coat of red oxide primer on Angle iron fencing post complete all as specified and directed by Engineer-in-Charge.

Mild steel work as in nibs welded to fencing post for securing of barbed or any type of wire complete all as specified and directed by Engr-in-Charge.

Material and labour for Textured heavy duty exterior coloured vitrified tiles of size 300x300x10mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including a screed bed of 15mm thick in CM (1:4) including dismantling existing tiles complete all as specified and directed by Engineer-in-Charge.

Supply and fixing PVC flushing pipe of (required length) polyethylene of low or high density or PVC 32mm dia complete all as specified and directed by Engineer-in-Charge.

INDERJIT SINGH

pardeep singh marwaha

Vijay Kumar Contractor and Engineers