ADDITION ALTERATION AND PROVISION OF INTERLOCKING PAVER BLOCK PATHWAY AT VISHAKHA VANDANA COMPLEX UNDER GE (NW) NOFRA AND SPECIAL REPAIRS TO DUTY ROOMS AT GUARD ROOM P6 OF INS SHIKRA COLABA MUMBAI

Amount

Excavating over areas, n exc 1.5 m deep and getting out in hard/ dense soil including removing of excavated material outside MD land as per guidelines of BMC complete all as specified and directed.

Rolling and consolidating for formation of surfaces in cutting with 8 to 12 tonne power roller complete all as specified and directed.

Hardcore of broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8 type D2 (Using 40 mm graded stone aggregate) as in sub base incl demolition of old PCC and removal from site complete all as specified and directed.

Material and labour for PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in coping, kerb stone pcc or similar places etc incl dismantiling of existing concrete complete all as specified and directed.

Use and waste Formwork to faces of walls flat fair finished, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc, vertical or to batter etc complete all as specified and directed.

Dismantling floor, hearth, cement concrete tiles, interocking paver block including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block having glossy finish shape and size as approved by GE confirming to IS 15658-2006 of 80mm thickness, M-40 Grade of with grey cement and pigments laid over and including 50 mm thick dry sand cushioning and voids filled with dry and surface compact, including compaction by means of surface vibrator complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block having glossy finish shape and size as approved by GE confirming to IS 15658-2006 of 60mm thickness, M-35 Grade of with grey cement and pigments laid over and including 50 mm thick dry sand cushioning and voids filled with dry and surface compact, including compaction by means of surface vibrator complete all as specified and directed.

Dismantling of old interlocking tiles carefully and Refixing in same location interlocking paver tiles any thickness/ size and M&L for 50 mm thick dry sand cushioning and voids filled with dry and surface compact, including compation, complete all as specified and directed.

Taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm each but with shutters (without taking off shutters from the frame)

Taking down of chowkhats or frames without taking off shutters from the frame n.exc 1.5 Sqm, complete all as specified.

Dismantling stone slabs and tiles of any description or thickness in floors laid bedded and pointed in any mortar, complete all as specified.

M&L Granite (of any type) work (table rubbed and polished) 20mm thick in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite., and nosing /rounding to edges of stone slabs one edge,all as specified and directed .

S&F powder coated (colour of coating as directed) aluminium (minimum 25 micron thickness of coating) of various section as required/suitable for doors, window & partion/Ventilator (sliding /or openable type)etc including fixing and making the frames hinges to receive glass/wire gauge etc. Complete incl all fittings like jointing cleats, glazing clips, rubber neoprene packing. anodised aluminium snap beading screws etc. rubber beading, clips locking arrangement, handle, sealant etc all as specified and as directed.

Supply & fix aluminium anodised grill (minimum thickness of anodising 15 micron) with and including suitable aluminium anodized 'F'/'H' section frame as required with aluminium rebated/screwed attachment complete all as specified and directed complete all as specified and directed. [Note:- Aluminium grill shall be of Approved make as per Design No DG 102, 7.50mm x 6.0mm and weight shall not be less than 3.131Kg/Sqm or approved design.]

S&F Aluminium Wire Cloth 0.45mm niminal dia with 1.40mm average width of aperature, fixed with aluminium wire staples, complete all as specified and as directed.

M&L for light shade coloured vitrified ceramic tiles 10 mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointing in white or coloured cement to match incl 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for light shade coloured vitrified ceramic tiles 10 mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 Sqm as in skirting etc set and jointed in neat cement slurry and pointee in white or coloured cement to match incl 10 mm thick rendering in CM 1:4 complete all as specified and directed.

M & L Non - skid Ceramic tiles coloured 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM (1:6), complete all as specified.

M&L, Glazed ceramic tiles coloured of size 350x 250x 7 mm/ 450X 300X 7mm laid on vertical surface such as dado/skirting over cement mortar backing coat, set jointed in neat cement slurry and pointed in white or coloured cement including 15mm thick backing coat in CM 1:4, complete all as specified.

M&L for rendering fair finish 15mm thick plaster with ready mix prepacked proportioned dry mix mortar, mixed with water proofing compound on fair faces of brick wall or concrete surfaces, on internal surfaces including transporting of material, mixing, curing, etc. complete all as specified and directed. [Note :- Water proofing compound shall be measured and paid seperately as supply only.]

Supply only integral water proofing compound complete all as specified.

M&L Rendering fair finish 15mm thick plaster with ready mix prepacked proportioned dry mix mortar, fair faces of brick wall or concrete surfaces, on internal surfaces including transporting of material, mixing, curing, etc. complete all as specified and directed.

M&L Rendering fair finish 10mm thick plaster with ready mix prepacked proportioned dry mix mortar fair faces of brick wall or concrete surfaces additives, on ceiling including transporting of material, mixing, curing, etc. complete as per direction.

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer on 1 to 2 mm thick wall care putty all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of exterior emulsion paint over a coat of primer on wall complete all as specified and directed.(Work carried out upto 7th floor of building either from inside or from outside)[Note- Quoted rate deemed to be inclusive of scaffolding and necessary safety precaution]

Material and labour for preparation of new plastered surface of ceiling and applying two coats of oil emuslion distemper over a coat of primer on 2 to 3 mm thick wall care putty all as specified and directed.

M&L for preparation of old plastered surface of wall and applying 2 coats of oil emuslion distemper over a coat of primer over 2 to 3mm thick wall care putty all as specified and directed.

M&L for preparation of old plastered surface of ceiling and applying 2 coats of oil emuslion distemper over a coat of 2 to 3 mm thick wall care putty all as specified and directed.

M&L for preparation of old plastered surfaces of wall and applying two coats of exterior emulsion paint over a coat of primer on wall complete all as specified and directed.

S&F in repairs fancy type Stainless Steel drapery rods of 20-25mm size incl decorative brackets at the end and fixing in brick/ concrete surface with SS Screws complete all as specified and directed.

M&L 2nd class HW Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed

S&F 35mm thick factory made flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both side, complete all as specified and directed.

M&L for preparation of newly wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer incl preparation of surfaces.

S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified.

S&F for aluminium anodized barrel tower bolts 200 mm of extruded section.

S&F 150 mm size aluminium alloy handles, cast type anodised, ISI marked all as specified.

S&F butt hinges 100 mm mild steel hinges medium weight and fixed.

Taking up or down GI tubing of 15mm bore and connections complete all as directed

Supplying and laying of CPVC 20 mm pipes SDR 11 & Plain CPVC SDR 11/ (including special fittings if any i.e. Brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded brass adaptor etc) fittings on walls/ceiling or laying in floors complete all as specified.

Supply and fixing in repairs bib tap fancy type 15 mm bore ,CP cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule all as directed.

Supply and fixing in repairs angular stop valve cast copper alloy ,screwed down ,high pressure or butterfly handle screwed both ends for iron pipe or for union and fix of size 15 mm bore complete all as specified and directed.

Supply and fix in repair chromium plated brass health faucet (hand shower) with 8 mm dia with 1 mtr long flexibale tube wall mounted / hooked complete all as specified and directed.

S&F in repaires 15mm pillar taps, cast copper alloy with captain heads chromium plated screw down high pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair white vitreous china wash down water closet pan (pedestal pattern) with PVC seat cover including connection to dron pipe and flushing pipe all as specified.

S&F soap dish Stainless steel 150mm x 100mm fixed to wall all as specified in repairs complete all as specified.

S&F as in repairs brass chromium plated shower rose 100mm dia including 160mm long shower arm casted body round shape for wall mounted shower including fixed to pipe, complete all as specified and directed.

S&F in repair decorative corner, 6mm thick glass self round, 300mm size with SS railing 25mm high in bath room, fixed with 'D' type brackets on walls af approved make and pattern.

S&F in repairs stainless steel towel rail 20mm dia D type 60cm long between flanges complete all as specified and directed.

S&F in repair wash hand basin vitreous china white (flat back) of size 550x450mm including pillar cock , CI bracket 15mm dia polythene connection , 32mm dia waste coupling and 32mm dia PVC waste pipe 90cm long etc. complete all as specified and directed, including taking down the existing wash hand basin.

S&F in repair PVC low level flushing cistern including brackets 10 litre capacity, with inlet ball valve float, handle, flush pipe etc. complete fixed as in repairs complete all as specified and directed.

S&F as in repairs 15mm fancy type chromium plated Two way Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and including Cast iron work for architectural work of gate and hanging; also fastening and fixing complete conforming to Fe-290 (Gde E-165) complete all as specified and directed.

S&F as in repairs plates (plain or corrugated) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming to Fe-410 (Gde-250) complete all as specified and directed.

Preparation of new steel surafces & apply two coats of synthetic enemal paint over a coat of red oxide, complete all as specified.

S&F for fixing name of unit “NAVAL AIR STATION INS SHIKRA, COLABA, MUMBAI - 05” in bold and hollow letters Height - 450mm, 50mm thick made up of 1mm thick Stainless-Steel sheet (304) and to be fixed at the top of entry gate with all fixing arrangements and scaffolding complete all as specified and directed by Engineer Incharge.[NOTE-Quoted rate deemed to be inclusive of scaffolding]

S&F for fixing name of unit “ INS SHIKRA” in Hindi and English in bold and hollow letters Height - 300mm, 25mm thick made up of 1mm thick Stainless-Steel sheet (304) and to be fixed over newly prepared gate on either side each (In Hindi and English) with all fixing arrangements complete all as specified and directed by Engineer Incharge.[NOTE-Quoted rate deemed to be inclusive of scaffolding]

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators,sockets,light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc

M & L for Point wiring complete with 1.5 sqmm single core multistranded FRLS PVC insulated sheathed copper conductors 1100 volts grade drawn through & including PVC non-metallic double locked casing ISI marked with accessories fixed in wall/ceiling/truss including cutting chases, pinning in etc with PVC non metallic ISI marked terminal boxes concealed wall including one FRLS PVC insulated & sheathed multistranded green colour copper conductor 1.5 sqmm as earth continuity conductor connected to common earth as earth dolly complete all as specifed and directed.

(a) One light point controlled by one switch SP one way.

(b) One ceiling fan point controlled with one 5A switch.

(c) One exhaust fan point controlled with one 5A switch.

(d) One 3 pin socket outlet 5Amps on independant board.

(e) One 3 pin socket outlet 5Amps on same board with other switches.

Material and Labour point wiring for 15 Amps socket complete with 2.5 sqmm single core multistranded FRLS PVC insulated unsheathed copper conductors 1100 volts grade drawn through and including PVC non-metallic double locked casing and caping including PVC bend, tee joints etc as per site requirement, ISI marked with accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI marked including one FRLS PVC insulated & unsheathed multistranded green colour copper conductor 4 sqmm as earth continuity conductor connected to common earth as earth dolly complete all as specifed and directed.

S&F Modular Switch , 6Amp, One way, 1 module, ISI marked complete all as specified and directed.

S&F Modular Switch , 16Amp, One way, 1 module, ISI marked complete all as specified and directed.

S&F in repair Modular Socket , 6 Amps, 2/3 pin combined 2 module, ISI marked complete all as specified and directed.

S&F in repair Modular Socket , 16Amps, 6 pin combined 2 module, ISI marked complete all as specified and directed.

S&F ceiling rose surface bakelite with ISI mark, three terminals complete all as specified and directed.

S&F Modular white cover plate with Frame 3 Module, ISI marked complete all as specified and directed.

S&F Modular white cover plate with Frame 6 Module, ISI marked complete all as specified and directed.

S&F Modular white cover plate with Frame 8 Module, ISI marked complete all as specified and directed.

S&F Modular metal flush box 3 module, ISI marked and including cutting hole in wall / ceiling/piller etc and making good surface complete all as specified and directed.

S&F Modular metal flush box 6 module, ISI marked and including cutting hole in wall / ceiling/piller etc and making good surface complete all as specified and directed.

S&F Modular metal flush box 8 module , ISI marked and including cutting hole in wall / ceiling/piller etc and making good surface complete all as specified and directed.

Supply and fixing integrated LED batten 20 Watt, 4 feet long, full white in Engineering plastic battern with white acrylic cover with built in electronic driver, pre-wired and connecting up with twisted twin core flexible copper wire of 0.5 sqmm from ceiling rose to connector of fitting including taking down existing unserviceable light fitting of any description complete all as specified and directed.

S&F of New LED Bldg security light 45 Watt indus series powder coated pressure die cast aluminium high power LED bldg security light with heat resistant toughned glass with lens with IP66 Protection including 40 mm dia pipe bracket fixing on wall at any height with 02 nos of MS clamp of suitable size,complete all as specified and directed.

Supply and fixing LED flood light glatt type 50 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection secondary lens with 120 lm/W efficacy and superior aesthetics complete all as specified and directed by Engr in Charge.

Supply and fixing LED flood light glatt type 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection secondary lens with 120 lm/W efficacy and superior aesthetics complete all as specified and directed by Engr in Charge.

Supply and fixing LED flood light glatt type 250 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection secondary lens with 120 lm/W efficacy and superior aesthetics complete all as specified and directed by Engr in Charge

Supply, laying, commisssion & testing XLPE insulated armoured LT cable, 1100 Volts grade with aluminium conductor of size 4 core 10 Sqmm laid in trenches/ through pipe/ ducts or fixed on wall in suitable size of PVC conduict with clamp complete all as specifed and directed by Engr in Charge.

Supply and fix Archner type LED post top 60 Watt, 6500K with decorative circular design compliant to dark sky norms wth polycarbonate opal diffuser and IP 65 protection complete all as specified and directed by Engr in Charge.

Supply and fix Glow Sign board showing Installation name printed on flex sheet , Nos and size of letter as per site requirement alongwith suitable size of MS angle and 20 W weather proof led lube light complete all as specified and directed by Engr in Charge.

Supply and fix Landscape lights LED spike/ bush light 9W, 3000 K with dire cast aluminum housing designed for rugged outdoor usage & IP 65 protection complete all as specified and directed.

Supply and fix PVC sheathed aluminum cable/service wire 10 sqmm 2 core,1100 volt including suitable size of PVC conduict complete all as specified and directed by Engr in Charge.

S&F Plug and Socket enclosure, in sheet metal enclosure with MCB, DP 20 Amps 240 Volts complete with metal clad socket complete all as specifed and directed.

Supply and fix submain wiring in repair with two single core FRLS unsheathed 1100 volts grade cable with stranded copper conductor of size 4 Sqmm in and including PVC casing and caping of suitable dia, ISI marked including 1 single core cable with stranded copper conductor of size 4 sqmm (green colour) for earthing. [Note :- (i) Two runs of 4 Sqmm cable, 1 run of PVC casing & caping and 1 run of 4 Sqmm cable shall be measured as 1 RM.]

S&F DB 8 way Double door SPN type, 240 volt having protection IP-42, with 200 Amps rated bus bar connecting with existing wiring circuits by providing copper pin terminals of suitable size complete all as directed.

Supply and fixing MCB SPN 40 to 63 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specifed and directed by Engr in Charge.

S&F MCB SP 06-32 Amps, 10 KA rating complete all as specified and directed.

Supply & install, testing and commissioning of outdoor type cubicle panel board, 415 V, 3 phase, 4 wire, aluminium bus bar of rating 200 Amps, made out of 3 mm thick CRCA sheet , factory fabricated , CPRI approved , powder coated(seven tank processed) with approved shade ,dust and vermin proof , provn for ventilation , angle iron frame and four legs of 50 x 50 x 6 mm thick angle iron , grouted on PCC foundation of height not less than 30 cm from the ground level , grouting properly and of suitable size to accomodate the items mentioned below and having seperate compartment /chambers for cable gallery, cable glands, cable lugs, bus bar, MCCB fixed vertically with bus bar and panel both side (front and back) openable etc all as specified and comprising of following including necessary PCC work, cable connections to the MCCBs digital multifunction meter and cable lugs etc . :- (a) MCCB 4 Pole, 415V, 50Hz adjustable magnitic & thermal type, 100 Amps with breaking capacity 16KA. - 01 No. (Incoming). (b) MCCB 4 Pole, 415V, 50Hz adjustable magnitic & thermal type, 63 Amps with breaking capacity 25KA. -02 Nos (Out going). (c) RYB led indicator (d) Digital multifunction meter. (e) Complete internal wiring of meter of indicator with suitable size of CT.

M K ENTERPRISES (BID ID -3131063)

Bob Enterprises (BID ID -3131457)

satguruenterprises (BID ID -3138147)

Anil Industrial Corporation (BID ID -3131480)

Unitech Enterprises (BID ID -3130758)

SHREE JAGDISH FURNITURE CO. (BID ID -3130864)

SN CONSTRUCTION (BID ID -3128566)