Comprehensive Infrastructure Improvement Works in BTM Layout Constituency comprising Road Asphalting, Drainage Improvement & Desilting, Footpath Development, Median Marking, Road Stud Installation, and other development Works on Arterial, Sub-Arterial and Ward Roads of BTM layout Division (Comprising of 3 works, As per GO Annexure -5 Sl No. 100, 101 and 102) Package No-8

Comprehensive Infrastructure Improvement Works in BTM Layout Constituency comprising Road Asphalting, Drainage Improvement & Desilting, Footpath Development, Median Marking, Road Stud Installation, and other development Works on Arterial, Sub-Arterial and Ward Roads of BTM layout Division (Comprising of 3 works, As per GO Annexure -5 Sl No. 100, 101 and 102) Package No-8

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever nec...

Removing and refixing of drain covering slabs ( B S Slab or RCC Slab 10

cms) and pointing in CM (1:3) (Excluding of GST and Area Loading Charges)

Removing and resetting of precast kerb stones fixed with CM 1:3 fixed

and finished in line as per direction of Engineer in charge. (The cost of PCC shall be paid extra)

Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed raded coarse aggregates and fine aggregates as per relevant IS ...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Removing & Resetting existing Heavy Duty Cobble/Interlocking stones/Pavers of thickness 60/75/80/100mm using Cement and 40mm thick sand bed ( average thickness ) and compacting

with plate vibrator to ...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying 100mm thick factory made precast M -40 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions more than 10MSA upto 20MSA f...

Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions upto 10MSA

& for Residential ...

Providing and fixing precast reinforced cement concrete covering slabs of 10cm thick made out of M25 with OPC cement @ 340kgs/cum, with 20 mm downsize graded metal coarse aggregates @ 0.70cum and fine...

Providing and fixing precast reinforced cement concrete covering slabs of 23cm thick made out of M25 with OPC cement @ 340kgs/cum, with 20 mm downsize graded metal coarse aggregates @ 0.70cum and fine...

Providing and fixing pre cast solid cement concrete kerb stones made out of CC 1:2:4 with top and bottom width 114 and 165 mm respectively, 400mm high and 450mm in length finished with CM 1:3 plasteri...

Painting two coats after filling the surface with synthetic enamel paint in

all shades on new plastered concrete surfaces

Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/Kankar/Moorum. (Tipper 10 m3) Cost of Haulage Case-1 : Surfaced Road A Taking output 10 t load and lead 10 km = 100 t.km. (For Desilt)

Milling of existing Bituminous surface to a specified depth up to 40mm using Milling machine including disposal of removed material

Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/Kankar/Moorum. (Tipper 10 m3) Cost of Haulage Case-1 : Surfaced Road A Taking output 10 t load and lead 10 km = 100 t.km.

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...

Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.90 kg per m2 using mecha...

Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned with mechanical broom

Providing and laying Dense Graded Bituminous Macadam with 40/60 TPH capacity HMP using crushed aggregates of specified grading, premixed with bituminous binder VG-30, @ 4.5 per cent by weight of total...

Providing and laying Bituminous Concrete with not less than 40/60 TPH capacity HMP using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.4% Bitumen and waste plastic...

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/ m2 area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IR...

Providing Precast RCC High medians of tailormade size with Length 2.0m, Top Width 0.10m, Bottom width 0.50.m & Height 1.00m made of M30 grade Concrete anchored in 25mm thick Asphalt concrete. The cost...

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...

Providing and Fixing of Median Marker that are made of tough, high impact resistant, injection-molded, thermoplastic body with an isosceles trapezoidal structure of length, width and height not less t...

Providing and erecting overhead signs with a corrosion resistant 2mm thick aluminium alloy sheet reflectorised with high intensity retro-reflective sheeting as per IRC:67:2022 with vertical and latera...

Providing and Laying of Rumble strips with Two component cold plastic with Primer coating rolled on surfacing material solvent free, high build two pack seamless, tough, skid resistant,for material to...

Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal ...