Repairing and Maintenance of nine numbers Sluice Gates etc. under Guwahati Mechanical W.R. division for the year 2024-25

Amount

M.S.Plate, 6 mm

M.S.Plate, 10 mm

M.S.Channel, 175x75mm

M.S.Channel, 150x75mm

M.S. Channel 125 x 65 mm

M.S. Channel, 100 x 50 mm

M.S.Angle, 75x75x6mm

M.S.Angle, 50x50x6mm

M.S.Flat, 50x6mm

‘J’- type Rubber seal, 125mm

M.S.Electrode, 8 SWG

M.S. Electrode, 10 SWG

Separator studs with nut on both ends, tube of length of 250mm to 460mm.

M.S.Shaft, 63 mm dia.

Thread cutting 2 TPI including fine finishing & making hole in one end as per direction for size, 63 mm dia. of shaft.

C.I. Boss with internal thread cutting 2 TPI, making groove for bearing, slot for lock plate & 1.5” drill for providing handle as per direction, 150x200mm

C.I. Boss with internal thread cutting 2 TPI, making groove for bearing, slot for lock plate & 1.5” drill for providing handle as per direction, 125x175mm

M.S.Base plate, 300x300x12mm

M.S. Base plate, 300x300x10mm

M.S.Lock plate, 300x300x10mm

Clamp for lock plate

H.D.Thrust ball bearing. , 65mm

H.D.Thrust ball bearing. , 50mm

Distant tube with pins, 100x12mm

Distant tube with pins, 75x12mm

G.I.Pipe, 25 mm dia.

Shaft pin, 20mm dia.

C.I.Roller with suitable collar 10-12mm & centre hole 10-20mm as per direction, 100x150mm

‘F’- shaped roller brkts.,100x150mm

Roller pin, 16 mm

Pulley Stand of size 100x50mm for 150mm pulley

Pulley Stand of size 100x50mm for 125mm pulley

C.I.Pulley 16-25mm dia. centre hole of size150mm

C.I.Pulley 16-25mm dia. centre hole of size 125mm

Pulley pin, 16mm dia.

Steel wire rope, 16mm

‘U’- clamp bolts, 16mm

C.C. Counter weight circular type 400mm dia around 100mm thick with 25mm dia. Hole at centre and two handles for carrying weight of 30 Kg each as per direction.

Counter weight holder made of 20-25mm dia. rod of length 0.5-0.8 mtr. with 100x50mm channel at the base and ring at top.

Gas cutting nozzle

Arc welding holder, 600 Amp.

Nylon rope

Jati bamboo

Coir rope

Arc welding cable, 600 Amp.

Gas cutting hose, 12mm dia. (Red and Black)

Gas cutting kit

Leather hand gloves

Arc welding mask

Waste cotton

W.B.Grease

Nuts & Bolts (Assorted size )

M.S.Washer (Assorted size )

Steel wire brush

Painting brush, 3”

Red oxide primer

Antisol red oxide paint

Turpentine oil

Hacksaw Blade 1.5" x 12" (D/E)

Skilled welder for fabrication works by welding & Gas cutting

Ordinary Labours for various assisting work during repairing , fabrication & welding works, carrying & handling of sluice gate materials, watch keeping , garbage cleaning , painting , lubrication etc.

Deployment of 3 ton capacity crane for loading, un loading, shifting, installation works.

Demolishing R.C.C. work manually/ by mechanical means including staking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer- in - charge

Centering and shuttering including strutting, propping etc. and removal of form for Columns, pillars, piers, Abutments, posts and struts

Providing and laying in position specified grade of reinforced cement concrete , excluding the cost of centering, shuttering, finishing and reinforcement- all work upto plinth level 1:1.5:3 ( 1 cement: 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size

Kit gaskets for overhauling with head gasket (E-430/435) (POWER TRAC E-439PTT Tractor)

Kit engine main and connecting rod bearing (POWER TRAC E-439PTT Tractor)

Kit connecting Rod small end bushes (E3.179/E3.215 ) (POWER TRAC E-439PTT Tractor)

Guide Engine Valve (E-430/435 ) (POWER TRAC E-439PTT Tractor)

Seal oil crankshaft front (POWER TRAC E-439PTT Tractor)

Seal oil crankshaft rear (POWER TRAC E-439PTT Tractor)

Filter assembly lube oil (Farmtrac)

Kit fuel filter inserts primary and secondary (POWER TRAC E-439PTT Tractor)

Seal O ring 3.80 X 95.20 (POWER TRAC E-439PTT Tractor)

Engine Air cleaner assembly (POWER TRAC E-439PTT Tractor)

Pre cleaner assembly (POWER TRAC E-439PTT Tractor)

Engine head seat (POWER TRAC E-439PTT Tractor)

Seal valve stem 8mm diameter (POWER TRAC E-439PTT Tractor)

Bush front axle kingpin (POWER TRAC E-439PTT Tractor)

Clutch plate 11 (POWER TRAC E-439PTT Tractor)

Plate and cover assembly clutch 11 (POWER TRAC E-439PTT Tractor)

Clutch release bearing (POWER TRAC E-439PTT Tractor)

Bracket assembly battery support (POWER TRAC E-439PTT Tractor)

Transmission oil (POWER TRAC E-439PTT Tractor)

Engine Oil Super HDB TURBO 15W 40

Harness assembly main (POWER TRAC E-439PTT Tractor)

Labour charge for crank grinding (POWER TRAC E-439PTT Tractor)

Labour charge for liner fitting (POWER TRAC E-439PTT Tractor)

Labour charge for CR bush fitting (POWER TRAC E-439PTT Tractor)

Labour charge for engine overhauling (POWER TRAC E-439PTT Tractor)

Labour charge for clutch overhauling

Labour charge for rear brake overhauling (POWER TRAC E-439PTT Tractor)

Diesel filter (TATA TRUCK -1210 SE)

Mobil filter (TATA TRUCK -1210 SE)

Tie rod end (TATA TRUCK -1210 SE)

Steering cross (TATA TRUCK -1210 SE)

Steering switch (TATA TRUCK -1210 SE)

U.J. Cross (TATA TRUCK -1210 SE)

Propeller shaft yoke (TATA TRUCK -1210 SE)

Propeller shaft teeth (TATA TRUCK -1210 SE)

King pin repair kit (TATA TRUCK -1210 SE)

Rear axle shaft (TATA TRUCK -1210 SE)

Hub oil seal, rear (TATA TRUCK -1210 SE)

Clutch plate assembly (TATA TRUCK -1210 SE)

Clutch pressure plate assy (TATA TRUCK -1210 SE)

Shock absorber assy (TATA TRUCK -1210 SE)

Spring hanger (TATA TRUCK -1210 SE)

Spring 1st leaf (TATA TRUCK -1210 SE)

Spring bushing (TATA TRUCK -1210 SE)

U-bolt for Chassis (TATA TRUCK -1210 SE)

Self-starter bendix pinion (TATA TRUCK -1210 SE)

Voltage regulator (TATA TRUCK -1210 SE)

Lubricating oil

Gear oil

Brake oil

Battery -12 Volt, 24 Plate from reputed Manufacturer like Exide/Amaron/Lucas)

8.25R16 - 16PR size tyre with tube and flap

Labour charge for Clutch Unit complete dismantling, cleaning, checking, overhauling by replacing necessary parts (TATA TRUCK -1210 SE)

Labour charge for steering unit overhauling (TATA TRUCK -1210 SE)

Labour charge for Brake system overhauling with replacement of brake liner and wheel cylinder kit (TATA TRUCK -1210 SE)

Labour charge for Front spring leaf assy., removing, dismantling, recambering and refitting/assy (TATA TRUCK -1210 SE)

Labour charge for Rear spring leaf assy., removing, dismantling, recambering and refitting/assy (TATA TRUCK -1210 SE)

Labour charge for alternator overhauling anf refitting (TATA TRUCK -1210 SE)

Labour charge for complete servicing including applicable changing of fuel filter, engine oil filter etc. (TATA TRUCK -1210 SE)

Brake fluid

Clutch Assy (TATA XENON)

Cover (TATA XENON)

Field Coil Main (TATA XENON)

SOL Switch (TATA XENON)

Terminal positive (TATA XENON)

Negative Terminal (TATA XENON)

Plunger Assy (TATA XENON)

Oil seal (TATA XENON)

DE Bearing (TATA XENON)

Clutch bearing (TATA XENON)

Clutch release bearing (TATA XENON)

Rep Kit Tie Road (TATA XENON)

Ball joint LH (TATA XENON)

Assy. Ball joint RH (TATA XENON)

Ball socket M28 X 1.5RH (TATA XENON)

Side Ring (TATA XENON)

Locking Ring (TATA XENON)

Wheel cyl 31.8 Dia FRT (TATA XENON)

Wheel cyl 44.45 Dia RR (TATA XENON)

Brake Hose (TATA XENON)

Air filter element (TATA XENON)

Fuel Filter (TATA XENON)

Oil Filter (TATA XENON)

Front Shock Absorber Assy (TATA XENON)

Rear Shock Absorber Assy (TATA XENON)

Glow plug (TATA XENON)

Palm Coupling M (TATA XENON)

Palm Coupling Emergency (TATA XENON)

Inner Clutch Race (TATA XENON)

Sliding ring (TATA XENON)

TMGO Diesel engine oil CI4 plus 15W40

Power Steering fluid (TATA XENON)

Coolant (Castrol/Radicool)

235/70 R16 Tubeless Tyre

Labour charge for Clutch Unit complete dismantling, cleaning, checking, overhauling by replacing necessary parts (TATA XENON)

Charges for brake system overhauling with replacement of brake liner & wheel cylinder Kit (TATA XENON)

Labour charge for Front spring leaf assy., removing, dismantling, recambering and refitting/assy (TATA XENON)

Labour charge for Rear spring leaf assy., removing, dismantling, recambering and refitting/assy (TATA XENON)

Labour charge for alternator overhauling and refitting (TATA XENON)

Charges for front bumper removing, repairing by welding, straighteneing, denting and refitting (TATA XENON)

SRI HITESH KALITA (BID ID -260120)

PARIJAT ENTERPRISE (BID ID -260119)

MS D.M. ENTERPRISE (BID ID -261139)

M/S K.B. ENGINEERS (BID ID -260113)

M/S P S ENTERPRISE (BID ID -260973)

SRI DINESH BORAH (BID ID -260123)

SKYLARK TRADERS (BID ID -260114)

PRAKASH ENTERPRISES (BID ID -260819)

MS A.R. Enterprise (BID ID -261010)

MS MODERN FABRICATORS (BID ID -260730)