PROVISION OF ELECTRIC CHIMNEY WITH DUCT WORK AND CONNECTED ITEMS IN COOK HOUSE AT NCC OTA KAMPTEE

M&L for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20 mm medium grade concealed in wall/ceiling of the following sizes :- 4x1.5 Sqmm with earth wire of 1x1.5 Sqmm. Note :- Accessories for point/sub main wiring like PVC junction box, bend, Tee, elbow shall be of same make. Colour coding shall be as per SSR part I

S & F Triple pole and earth encolsure 415 volt with a three pin, neutral and earth plug with socket complete with one triple pole MCB complete all as specified and directed.

Design, testing, commissioning of electric chimney for Cook Houses made out of stainless steel sheet having oil filter sheet 304 GI ducting connected to outer Gl sheet vertical duct of appropriate size and gauge, discharging gases to roof Provision of blower motor and fan 3 Phase as per manufacturer design, and comprising of the following items:- SS Hood with Filter of sizes 3000 x 750 x 450 mm

Design, testing, commissioning of electric chimney for Cook Houses made out of stainless steel sheet having oil filter with 22 gauge sheet 304 GI ducting connected to outer Gl sheet vertical duct of appropriate size and gauge, discharging gases to roof Provision of blower motor and fan 3 Phase as per manufacturer design, ar and comprising of the following items:- SS Hood with Filter of sizes 2400 x 750 x 450 mm

Design, testing, commissioning of electric chimney for Cook Houses made out of stainless steel sheet having oil filter with 22 gauge sheet 304 GI ducting connected to outer Gl sheet vertical duct of appropriate size and gauge, discharging gases to roof Provision of blower motor and fan 3 Phase as per manufacturer design, automatic motor with starter and comprising of the following items:- SS Hood with Filter of sizes 600 x 600 x 450 mm

Supply Installation, testing and commissioning of Axial fan heavy metal body 600 mm sweep delievring min 10800 CFM fixed in GI duct 3 phase motor suitable for 415 V 50 HZ supply complete

Supply and installation of GI, Pre fabricated rectangular GI ducts, of 24 SWG, Glavanised Iron Sheet thickness 0.63 mm complete with MS flanges and bracing (as specified), necessary supports using thread rods (as directed) and anchor bolts, supply air collars, vanes, splitters dampers duly painted of the ducts complete all as specified and directed by Engr-in Charge.

Supply, fabrication and installation of MS base frame of MS angle iron and flat iron of suitable size for Duct complete with epoxy painting, vibration isolation pads, supports, rangers, railing, brackets etc with coats of epoxy primer and 2 supports of black point etc are required. complete all as specified and directed by Engr-in Charge

Material and Labour for making opening/hole for Axial fan 600 mm sweep for fixing of Axial fan complete all as specified and directed