REPAIRS TO BLAST PEN, UPVC SIGN BOARDS, PCC, PAVINGS, HARD STANDING, JOINT FILLING, CRACK FILLING AND SMART PERODICALS TO HANGERS, SUNSHELTERS FOR OPERATIONAL REQUIREMENT AND OTHER E/M SERVICES AT AF STN BKT

Amount

S&F in repair visible UPVC sign board of area/size exceeding 1.80 sqm but not exceeding 3.15sqm each made from 5.00 mm thick engineering grade plastic (acrylic Sheet) having monolithic structure to with stand,temperature variations from cold environment to sweltering hot condition and to withstand high velocity winds,framed and braced with 50mm dia PVC pipe best qualty to withstandhigh velocity wind pressure,with ht of bottom of board should be 45-60 cm above the ground level with best quaility structure including providing and applying weather resistance coating,providing and pasting of new numerals/alphabets with retro reflective tape cutting on it as computer plotter etc with and including LED light provisioning fan illumination complete all as specified and directed

Supply & fixing in repair visible UPVC sign board of area/size not exceeding 1.80 sqm each made from 5.00 mm thick each made from 5.00 mm thick engineering grade plastic (acrylic Sheet) having monolithic structure to withstand, temperature variations from cold environment to sweltering hot condition sand to with stand high velocity winds,framed and braced with 50mm dia PVC pipe best qualty to withstand high velocity wind pressure,with height of bottom of board should be 45-60 cm above the ground level with best quaility structure including providing and applying weather resistance coating,providing and pasting of new numerals/alphabets with retro reflective tape cutting on it as computer plotter etc with and including LED light provisioning fan illumination complete all as specified and directed

M & L for cutting the edges of existing joints with suitable machine by racking out old sealing compound from existing joints of tarmac of size 8mm to 12mm wide and 25mm deep and as directed by special tools like cutting blades / grinder machines (use of hammers is prohibited as it damages the edges) and removing old filled sealing compound from the joints by means of compressed air using hand blower including disposal of the same to a distance of 500m from the edge of runway as directed and repair of joints by epoxy wherever required and fill the joints by mechanical means as per following process: - (i) Provision of Backup rod of 10mm dia suitable to be inserted in the joint tightly as specified. (ii) Provision of adequate masking tape on either sides of joint to avoid spillage on concrete surface before applying joint sealant and removing the same after sealing of joints. (iii) Supplying and filling of sealing compound properly for a depth of 15mm as specified after application of suitable primer as directed . (The finished level of sealed joints shall be on an average 3 mm below the top surface of slabs.) NOTE: - Sealing compound shall be Bostik "Seal N flex -2k', 02 component (Base and Hardner) Bostik Polyurethane sealent of grey colour conforming to BS-5212 with minimum movement accommodation factor of + 30% when tested as per ASTM C-719 or equivalent product of M/S Choksey Chemicals Pvt. Ltd. or M/S STP Ltd. as approved. The sealent shall have shore A @ 25 degree centigrade =15 + 5 and as per manufacturer's instructions.

Ditto all as per item No 03 here in before but joints of width 14mm to 18mm and 28 mm deep (alongwith 12 mm dia backup polyethylne rod complete all as specified and directed.

Ditto all asper item No 03 here in before but joints of width 20mm to 25mm and 45 mm deep (alongwith 30 mm dia backup polyethylne rod complete all as specified and directed.

Ditto all asper item No 03 here in before but joints of width 08mm to 12mm and 25 mm deep (alongwith 10 mm dia backup polyethylne rod complete all as specified and directed. NOTE: - Sealing compound shall be Bostik "Seal N flex -Premium P 795', Bostik Polyurethane sealent of grey colour conforming to BS-5212 with minimum movement accommodation factor of (+ -) 50% when tested as per ASTM C-920 & ASTM C1248 or equivalent product of M/S Choksey Chemicals Pvt. Ltd. or M/S STP Ltd. as approved. The sealent shall have shore A hardness >/= 35 and as per manufacturer's instructions.

Ditto all asper item No 06 above but joints of width 14mm to 18mm and 28 mm deep (alongwith 12 mm dia backup polyethylne rod)

Ditto all as per item No 06 above but joints of width 20mm to 25mm and 45 mm deep (alongwith 30 mm dia backup polyethylne rod)

M & L for filling of pot holes of size 20mm to 30mm dia and 20mm to 30mm deep in concrete surface and filling as per following process:- (i) Cleaning of surface by means of wire brush and removing the dust by means of compressed air. (ii) Bostik ERM or equivalent product of M/S Choksey Chemicals Pvt. Ltd. or M/S STP Ltd as approved epoxy resin mortar as per manufacturer's instructions after application of epoxy resin primer with and including necessary form work complete all as specified and directed.

M & L for repair to concrete slab or pavement of existing damaged edges / spoiled edges to triangular / rectangular cross section,of width 15mm to 20mm and depth 30mm to 40mm , by machine cutting and removing all broken and loose material to a distance exc. 50 metres but not exc. 100 metres and cleaning the surface with compressed air to remove dust, dirt, loose sand / foreign material, washing the surface with acid solution and repairing surface / edge with Bostik ERM or equivalent product of M/S Choksey Chemicals Pvt. Ltd. or M/S STP Ltd as approved epoxy resin mortar as per manufacturer's instructions after application of epoxy resin primer with and including necessary form work complete all as specified and directed.

M & L for cutting the edges of any type of joints of width 8mm to 10mm and 30 mm deep by racking out old sealing compound from existing joints by means of compressed air and filled the joints with sealing compound grade 'B' after application of primer for the following size joints complete all as specified and directed.

M&L preparation of old painted surface of any description over 10cm width or girth of concrete/plastered surface and applying one coat of synthetic enamel paint on signal square, wind sock at any height etc complete all as specified and directed. Make : Asian Paints Apcolite Premium glass Enamel/ Nerolac Synthetic HIgh Glass Enamel/ Berger Hi-Glass Luxol

Demolition of cement Concrete surfaces of any description and in any position not other wise specifically provided for pavement of taxi track / runway / Disperasl area as directed. Complete all as specified and directed.

Removing demolited concrete/brick work material exc 250 m but not exceeding 500m and depositing where directed complete all as specfied and directed .

M & L for single component 'Aspha Flo' coal tar free signature grade Gilsonite modified Asphalt emulsion, special polymers and Adhesive streaming crack, joint stuffer to prevent cracks from forming into pot holes and filling of cracks and joints on asphaltic surface of the runway, shall be complete to be applied directly on damp pavement also and coverage shall be 24.20 mtr/Ltr for 6mm (width) x 6mm (depth) crack crack complete all as per manufactures instructions as specified and directed. (Make: M/S Srijan Systems Pvt Ltd or equavalent as approved by GE in writting.

M & L for single component 'Aspha Flo' coal tar free signature grade Gilsonite modified Asphalt emulsion, special polymers and Adhesive streaming crack, joint stuffer to prevent cracks from forming into pot holes and filling of cracks and joints on asphaltic surface of the runway, shall be complete to be applied directly on damp pavement also and coverage shall be 24.20 mtr/Ltr for size of crack 13mm x 13mm and coverage 6.05m/Ltr complete all as per manufactures instructions as specified and directed. (Make: M/S Srijan Systems Pvt Ltd or equivalent as approved by GE in writting.

M & L for approved earth (soft soil) with premises of MoD land and forming embankments including raising (or lowering) earth, spreading in layers not exc 25cm as required at site, watering, ramming and rolling by static/ power roller 8 to 12 tonne complete all as specified and directed.

Taking down carefully switch board complete along with old MS rectangular sunk type box heavy/medium duty of size 8 to 12 module from the existing position along with switches sockets regulators etc after disconnecting electric connections without damaging existing circuit and conduit complete and reconnecting all connection after comletion of job with making good the disturbed surface to match the existing one all as specified and directed.

Taking down carefully switch board complete along with old MS rectangular sunk type box heavy/medium duty of size 4 to 6 module from the existing position along with switches sockets regulators etc after disconnecting electric connections without damaging existing circuit and conduit complete and reconnecting all connection after comletion of job with making good the disturbed surface to match the existing one all as specified and directed.

Taking down carefully switch board complete along with old MS rectangular sunk type box heavy/medium duty of size 1 to 4 module from the existing position along with switches sockets regulators etc after disconnecting electric connections without damaging existing circuit and conduit complete and reconnecting all connection after comletion of job with making good the disturbed surface to match the existing one all as specified and directed.

M&L for modular metal flush boxes and white cover plate with frame of size 6/8 module for mounting modular type switches /socket/fan/ regulator complete all as specified and directed. Make - Goldmedal/crabtree(havells)/L&T.

M&L for modular metal flush boxes and white cover plate with frame of size 4 module for mounting modular type switches /socket/fan/ regulator complete all as specified and directed. Make - Goldmedal/crabtree(havells)/L&T.

M&L for modular metal flush boxes and white cover plate with frame of size 3 module for mounting modular type switches /socket/fan/ regulator complete all as specified and directed. Make - Goldmedal/crabtree(havells)/L&T.

M&L for modular metal flush boxes and white cover plate with frame of size 1/2 module for mounting modular type switches /socket/fan/ regulator complete all as specified and directed. .Make - Goldmedal/crabtree(havells)/L&T.

Supply and fix in repair modular switch 1 way 6A 1 module type complete all as specified and directed. .Make - Goldmedal/crabtree(havells)/L&T.

Supply and fix in repair modular switch 1 way 16A 1 module typecomplete all as specified and directed. Make - Goldmedal/crabtree(havells)/L&T.

Supply and fix in repair modular Socket 6A 3 pin combined 2 module complete all as specified and directed. Make - Goldmedal/crabtree(havells)/L&T.

Supply and fix in repair modular Socket 16A - 3/5 pin combined 2 module complete all as specified and directed. Make - Goldmedal/crabtree(havells)/L&T.

Supply and fix in reapir Modular step type regulator 1 module type complete all as specified and directed. Make - Goldmedal/crabtree(havells)/L&T.

Supply & Fix LED tube RETRO LED 16 to 22 watt of size 4 ft long complete all as specified and directed. Make :- Phillips/ Havells/ Crompton/ Bajaj.

S&F in repair decorative box type fitting for LED tube 16 to 22 watt luminaire for 230 volt AC,for LED tube 16 watt to 22 watt complete all as specified and directed . Make :-Phillips/ Havells/ Crompton/ Bajaj.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated copper conductor, served with inner sheathing of PVC tape and overall PVC sheathed flexible two core cable flat or circular of size 1.5 Sqmm solid copper conductor complete all as specified and directed. Make :- Havells/ Plaza/Finolex/Polycab.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including fitting and fixture and such as as switches, sockets ceiling rose,pendent holders,regulators,light fittings any type removing materials to store in safe custody or for credite etc, and making good the disturbed surface of walls and floors etc complete all as specified and directed.

M & L for point wiring with two single core PVC insulated & PVC unsheathed FRLS-H multistranded copper conductor cable of size 1.5 sqmm 1100 volt grade in concealled conduit into and including PVC conduit and making good the disturbed surface of wall with colour washing /distempering the surface to match the existing one in non metallic rigid PVC conduit medium grade 2 mm thick, not less than20mm dia with all accessories mounting on the surface of wall/ceiling/roof/etc with suitable size of 1 to 8 module metal flush boxes including modular front cover plate & back plate for mounting modular type switches /socket/fan/ regulator etc including provision of one single core PVC insulated and unsheathed multi stranded copper cable of size 1.5 sqmm 1100 volt grade as earth continuty conductor connected to common earth dolly switch board complete all as specified and directed.Make-Polycab/Finolex/RR kabels/Plaza/ Havells Note:- surface Conduit shall be laid in celing portion only. For one light/fan point controlled by one switch.

M & L for point wiring with two single core PVC insulated & PVC unsheathed FRLS-H multistranded copper conductor cable of size 1.5 sqmm 1100 volt grade in concealled conduit into and including PVC conduit and making good the disturbed surface of wall with colour washing /distempering the surface to match the existing one in non metallic rigid PVC conduit medium grade 2 mm thick, 20/25 mm dia with all accessories mounting on the surface of wall/ceiling/roof/etc with suitable size of 1 to 8 module metal flush boxes including modular front cover plate & back plate for mounting modular type switches /socket/fan/ regulator etc including provision of one single core PVC insulated and unsheathed multi stranded copper cable of size 1.5 sqmm 1100 volt grade as earth continuty conductor connected to common earth dolly switch board complete all as specified and directed.Make-Polycab/Finolex/RR kabels/Plaza/ Havells Note:- surface Conduit shall be laid in celing portion only. One socket outlet point 5 Amp on an independent board

Ditto all as per item no 36 but on the same board

Ditto all as per Item No 35 above but for One bell/ buzzer point controlled by one bell push

Ditto all as item no 35 herein before but using 2.5 sqmm , PVC insulated, stranded copper conductor single core cable for one 3 pin 15 Amp socket out let point on an independent board.

M&L for point wiring complete for one light point or one fan point controlled by one, one way 5 Amp switch with two run of cable PVC (FRLS-H) insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn into and including suitable size surface conduit/casing caping, including pressed steel concealed terminal switch boxes not less than 1.6mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC(FRLS-H) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed.

Ditto all as per Item No 40 above but for one 5 pin 5 Amp socket outlet point on an independent board.

Ditto all as per Item No 41 above but for one 5 pin 5 Amp socket outlet point on the same board with other switch.

Ditto all as per Item No 41 above but for One bell/ buzzer point controlled by one bell push

Ditto all as per Item No 40 above but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 2.50sqmm and green colour earth cable of size 2.50sqmm.

S&F Modular switch 1 way 6A 1 module type complete all as specified and directed. Note : Item shall be measured & paid only for new wiring.

S&F Modular switch 1 way 16A 1 module typecomplete all as specified and directed. Note : Item shall be measured & paid only for new wiring.

S&F Modular Socket 6A 3 pin combined 2 module complete all as specified and directed. Note : Item shall be measured & paid only for new wiring.

S&F Modular Socket 16A - 3/5 pin combined 2 module complete all as specified and directed. Note : Item shall be measured & paid only for new wiring.

S&F in replacement modular bell push single pole one way 6/10 Amp, 240 volt,1 module, fuesh type complete all as specified and directed.

S&F ceiling Rose, surface, bakelite 65 x 50 mm three terminals, AC, 230 Volts complete all as specified and directed. Make :- Anchor / Havells/ Legrand/ Standard/ Cona.

S&F in repair FTL fittings with decorative LED batten made up of aluminium casting 18/20 W of size complete standard fittings and fixtures including fixing on walls/roofs/ through MS down rod suspended type with fitting arrangement including neccessary electric connection from ceiling rose to luminaries with suitable size PVC cord complete all as specified and directed. Make:- Philips/ Havells/ Bajaj/ Crompton/ L&T.

M&L for flame proof point wiring with two single core FRLS-H PVC insulated & PVC unsheathed multi stranded copper conductor cable of size 1.5 Sqmm 1100 volts grade in and including stove enamelled steel conduit of size 20 to 25 mm with all accessories and one single core PVC insulated & PVC sheathed multistranded FRLS-H copper cable of size 1.5 Sqmm 1100 Volts grade as earth continuity conductor connected to common earth dolly, switch board complete incuding cutting chasses on wall/ floour/ ceiling etc. & making good the disturbed surface in cm (i:4) complete all as specified and directed for one light / fan point controlled by one 5 Amps flameproof switch one way complete. Make-Polycab/Finolex/RR kabels /Havells/Plaza.

Ditto all as per item no 52 herein before but with 2.5 sqmm conductor flame proof power point socket outlet complete. Make-Polycab/Finolex/RR kabels/Plaza/ Havells.

M&L for switch flame proof rotory type with termination box in LM 6, 16 A,single phase 250 volts,complete all as specified and directed. Make-Phillips/ Havells/ Legrand L&T

Supply and fixing LED Light Fitting 2x20 Watt flame proof ,CMRI certified recommended for gas/vapour group of IIA &III B ,zone 1 and 2 and IP 65 Protection with die cast alluminium housing with heat resistant toughned glass with LED tube light, fixtures, driver holders ,connectors etc complete with all accesories prewired and including connecting with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make-Phillips/ Havells/ L&T/ Bajaj

Material, labour (Technician & Helper) and T&P including testing of equipments for carring outs comprehensive maintenance and testing of earthing any type as per existing procedure for lighting protection /eqpts/domestic etc in tech area & admin area by tightening of nut bolts arranging earth lead in allighnment manner replacing unservicable earthing lead, test point, protection pipe etc (which will be paid under relevant item) and testing of earthing and recording result in register (as per procedure provided as directed ,If result found more than permissible limit reconditioning of earthing carried out by pouring water with salt /chemical as per direction and further testing the same earthing result and recording in register including levelling, refilling of earth settle down near pit complete all as specified and directed. Note :- Once the testing will started the contractor will have to complete the qty within month.

M& L for Earthing complete with galvanised steel earth plate electrode 600mm x 600mm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth strip of size 32mm x 6mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I including and connecting to earthing test point block made of gun metal or phosphorus bronze of size 75mm x75mm x 25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw and testing on completion with and including 15 mm bore light grade G.I. protection pipe (upto 7.5 M beyond outer edge of earth pit) base of PCC (1:4:8) type D-2 using 40 mm stone agregrate of size 750mm x750mm x100 mm thick with precast RCC cover 40 mm thick in PCC (1:2:4) type B1 using 20 mm graded stone aggregrate with 8 mm dia TMT bars 3 nos both ways with 12 mm dia round handle , PGI funnel with wire mesh, 20 mm dia GI pipe light grade for watering all as shown in electrical plate no 3 of SSR Part no 1 of 2009 complete all as spcifed and directed. including Earthing pit marker/ identifier of Iron plate of size 300mm X 200mm X 3mm and alongwith 1 meter long medium grade GI pipe of size 15 mm dia weilded with steel plate including painting with applying one coat of red oxide and two coat of painting with synthetic enameled paint of approved quality including writing letters as specified including testing on completion complete all as specified and directed.

M&L for earthing complete with copper plate electrode of size 600mm x 600mm x 3.15 mm thick burried directly in ground vertically at a depth not less than 3.25 meter deep below normal ground level with top edge of the plate not less than 2.50 metre below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt, filling in alternate layer and electrode connections by using copper strip 20mm x3 mm as main earthing lead by means of brass nut and bolt / brazing at all joints and protected by light grade 40 mm dia GI pipe connected, and GI pipe light grade 25 mm bore for watering and including funnel, wire mesh, and precast PCC chamber/pit of size 300mm x 300mm x 300mm on 600mm x 600mm x 100mm PCC base in (1:4:8) type D-2 using 40 mm graded crushed stone, RCC pit cover with PCC (1: 2: 4) type C-2 using 40 mm graded crushed stone aggregate cover of size 400mm x 400mm x 50 mm reinforced with 8 mm dia TMT bars @ 75mm C/C both ways with mild steel flushed type handle 12 mm dia including excavation and earth work, disposal of surplus soil to a distance not exc. 50 mtr all as specified and as shown on Plate No 3 of SSR Part I complete all as specified and directed.

M&L for copper strip 20 mm x 3 mm complete with saddles and fixing screws for fitting the strip for earth continuty conductor up to test points and up to lighting protection system complete all as specified and directed

M&L for Alluminium earting strip of size 25mm x 3mm including nesassary brazing and connecting existing earthing / lightening conductor system for roof conductors and down conductors above ground level complete all as specified and directed.

S&F in reapir galvanised iron tubing, 40 mm bore,light grade protection of earth strip pipe with all fittings for fixed to pole/wall/ in ground including all fixing accessories complete all as specified and as directed.

S&F in repair test point terminal block made of gun metal or phosphorus bronze size 75mm x75mm x 25mm drilled and screwed including 3 nos. 8mm dia 25m long hex. head screw including taking out old damaged/ rusted test point terminal block with connecting with earthing strip complete all as specified and directed.

S&F in repair PGI funnel with wire mesh of size 15 mm complete all as specified and directed

M& L for Earthing pit of PCC (1:3:6) type C1 using 20 mm bore grade stone aggregrate on base of PCC (1:4:8) type D-2 using 40 mm agregrate of size 800mm x 800mm x 100 mm thick with precast RCC cover 40 mm thick in PCC (1:2:4) type B1 using 20 mm graded stone aggregrate with 8 mm dia TMT bars 3 nos both ways with 12 mm dia round handle all including demoliton of old broken pits complete all as specified and directed

S&F in repair for submain wiring with two run of single core PVC FRLS-H insulated unsheathed multi stranded copper conductor cable of size 4 Sqmm 1100 volts grade and one run of PVC insulated unsheathed multi standed copper conductor cable of size 4 Sqmm 1100 volts grade as earth continuity conductor drawn through in and including rigid non metallic PVC concealed / surface conduit of suitable size on roof/wall/ceiling including making good the disturbed surfaces of wall etc complete all as directed. (Note : Two run of single core cable and one run of earth wire will be measured as one length and conduit and its accessories is deemed to be included in the quoted unit rate). Make- Polycab/Havells/RR kables/plaza. Make of PVC conduit :- AKG/ Plaza/ Jindal / Finolex

M&L in repair for submain wiring with two run of single core PVC FRLS-H insulated unsheathed multi stranded copper conductor cable of size 6 Sqmm 1100 volts grade and one run of PVC insulated unsheathed multi standed copper conductor cable of size 6 Sqmm 1100 volts grade as earth continuity conductor drawn through in and including rigid non metallic PVC concealed / surface conduit of suitable size on roof/wall/ceiling including making good the disturbed surfaces of wall etc including taking out old unserviceable burnt/damaged sub main wiring from its existing position complete all as directed by Engr-in-Charge (Note : Two run of single core cable and one run of earth wire will be measured as one length and conduit and its accessories is deemed to be included in the unit rate). Make- Polycab/Havells/RR kables/plaza. Make of PVC conduit :- AKG/ Plaza/ Jindal / Finolex

M&L in repair for Submain wiring with 2 single core PVC insulated FRLS-H multistrand copper conductor cable of size 10 Sq mm drawn into and including non metallic heavy duty rigid PVC conduit not less than 25 mm size ISI marked ivory colour (Pressfit or similar brand ) with all conduit fittings / accessories and 1 run single core 10 Sq mm FRLS multistrand copper conductor cable as continuous earth wire complete. (Note for submain wiring: 10 run of single core cable and two run of earth wire will be measured as one length). Make of PVC conduit :- AKG/ Plaza/ Jindal / Finolex

Taking down old unserviceable main switches/DB’s up to 100 Amps capacity fixed in wall and making good of all disturbed surfaces as per existing .

S&F sheet metal enclosure for DB’s when MCB to be used single pole and neutral double door, 4 way, AC,240 volt with 200 Amp bus bar rating complete all as specified and directed. Make :- Legrand / Seimens / L&T/ Havells.

S&F sheet metal enclosure for DB’s when MCB to be used single pole and neutral double door, 8 way, AC,240 volt with 200 amp bus bar rating complete all as directed. Make :- Legrand / Seimens / L&T/ Havells.

S&F sheet metal enclosure for DB’s when MCB to be used single pole and neutral double door, 12 way, AC,240 volt with 200 Amp bus bar rating complete all as directed.Make :-Legrand / Seimens or equivalent

S&F sheet metal enclosure double door (MCB DB) three phase and neutral with 200 Amps rated bus bar TPN, 4 way verticall type, with provision of MCB incommer, AC, 415 Volt complete all as specified & directed. Make :- Legrand / Seimens / L&T/ Havells.

S&F sheet metal enclosure double door (MCCB DB) three phase and neutral with 200 Amps rated bus bar VTPN, 4 way vertical type, with provision of MCCB incommer, AC, 415 Volt complete all as specified & directed. Make :- Legrand / Seimens / L&T/ Havells.

S&F MCB single pole, 6 to 32 Amps, 240 Volts 50 HZ, 10 KA breaking capacity complete all as directed. Make :- Legrand / Seimens / L&T/ Havells.

S&F MCB single pole, 32 to 40 Amps, 240 Volts 50 HZ, 10 KA breaking capacity complete all as directed. Make :- Legrand / Seimens / L&T/ Havells.

S&F MCB DP 40 to 63 Amps 240 Volts, 50 Hz, 10 KA breaking capacity complete all as directed. Make :- Legrand / Seimens / L&T/ Havells.

S&F MCB Four Pole 40 to 100 Amps 415 Volts, 50 Hz, 10 KA breaking capacity complete all as specified directed. Make :- Legrand / Seimens / L&T/ Havells.

S&F MCCB 4 pole 100 / 125 Amp 415 volts 50 HZ 16 KA breaking capacity complete all as directed. Make :- Legrand / Seimens / L&T/ Havells.

S&F modular type AC box with socket plug top and MCBs with two pin and one pin for earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed. Make :- Legrand / Seimens / L&T/ Havells.

S&F PVC casing and caping, 20/ 25 mm wide complete all as specified and as directed

M/S IQRA CONSTRUCTION (BID ID -3436554)

H C CONSTRUCTION (BID ID -3429510)

MUKHERJEE ENTERPRISE (BID ID -3430135)