Renovation of Hall no.408,309 and provision of MS staircase alongwith other civil works at CSIR Complex, Pusa, New Delhi

Amount

Providing and laying in position cement concrete of specified grade excluding the cost of centering, shuttering and finishing :all work up to 3rd floor .

1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering, shuttering and finishing :all work up to floor 6th.

1:4:8 (1 cement:4coarse sand:8 graded stone aggregate 20 mm nominal size).

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).

Centring and shuttering including strutting, propping etc. and removal of form for:removal of form for: Shelves& lintel beam etc (Cast in situ)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-mechanically Treated bars grade Fe-500D or more

Brick work with common burnt clay F.P.S. bricks (non-modular) of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in: Cement mortar 1:6 (1 cement : 6 coarse sand)

Half brick masonry with common burnt clay F.P.S. bricks (non-modular) of class designation 75 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 Cement : 4 coarse sand)

Providing and fixing 16 to 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for lift lobby cladding, kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels. Granite of any colour and shade.

area of slab up to 0.50 sqm

Extra for fixing marble / granite stone over and above coresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc. complete.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia & length including hold fast lugs or dash fastener : Second class teak wood

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : 35 mm thick including ISI marked stainless steel but hinges with necessary screws :

Extra for providing lipping with 2nd class teak wood battens 25mm minimum depth on all edges of shutters (overall area of door shutter to be measured)

Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with Decorative veneer facings of approved manufacture

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : 2nd class teak wood. 50x12 mm

Providing and fixing ISI marked CP chrome plated brass sliding door bolts with nuts and screws etc. Complete. Size 300x16 mm

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 250x10 mm

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete

Providing and fixing chromium plated brass handles with necessary screws etc. complete:

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :300x16 mm.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :125mm

Providing and fixing aluminium casement stays, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. each

Providing and fixing 2nd class teak wood lipping/ moulded beading or taj beading of size 18X5 mm fixed with wooden adhesive of approved quality and screws/nails on the edges of the Pre-laminated particle board as per direction of Engineer-in-charge.

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.0 mm thick

Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.

In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete

In gratings, frames, guard bar, ladders, railings, brackets, gates & similar works.

Providing and fixing Ist quality ceramic glazed (digitally printed, DGVT) wall tiles of size up to 600x300mmconforming to IS : 15622 (thickness to be specified by the manufacture ) of approved make in all colours, shades except burgundy , bottle green, black of size 600x300mm (digital printed) as approved by Engineer-in-Charge in walls, skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete

Providing and laying polished Vitrified Dual Charged tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved brand and manufacturer, in all colours & shade, in skirting , riser of steps , laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS 15477 in average 6mm thickness including grouting of joints. Size of tile upto 600x600mm.

Providing and laying polished Vitrified Dual Charged tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved brand and manufacturer, in all colours & shade laid in floors with cement based high polymer modified quick set tile adhesive (water based) conforming to IS 15477 in average 6mm thickness including grouting of joints. Size of tile 600x600mm.

Providing and fixing at all height false ceiling including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanised in accordance with zinc coating of grade 350 as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long.

G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum fire resistant board conforming to IS: 2095- Part I. (Part I) : 2011 (Board with BIS certification marks)

Providing & fixing UV stabilised double layer insulated polycabonate sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc.

overall thickness 10mm with hollow beteween layer of sheets, each layer consist 2mm thick with support.

Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on interlocking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6mm reveal profile /black),comprising of main-T runners of size 15x42mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate cross T of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall S.S screws. The work shall be carried out as per specifications,drawing and as per directions of the Engineer-in-Charge.

With 15 mm thick integral densified micro edge light weight calcium silicate false ceiling tiles

12mm cement plaster of mix: 1:4 (1 cement :4 coarse sand)

15 mm cement plaster on rough side of single or half brick wall of mix : 1:6 (1 cement : 6 coarse sand)

Distempering with dry distemper of approved brand and manufacture (two or more coats) of required shade on new work, over and including water thinnable priming coat to give an even shade.

Applying one coat of cement primer of approved brand and manufacture on wall surface :Cement Primer

Finishing walls with textured exterior/interior paint of required shade New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm

Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :

Two or more coats on new work

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work

French spirit polishing, Two or more coats on new works including a coat of wood filler

Providing and applying white cement based putty of average thickness 1mm , of approved brand and manufacturer, over the plastered wall surface even and smooth complete.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work

Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead. With cement mortar 1:4 (1cement :4 coarse sand)

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in - Charge.In cement mortar

Dismantling doors windows and clerestory windows (steel or wood) shutter including chowkhats,architave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3.0 sqm & below : (Note: Nothing extra will be paid for shifting / loading /unloading of the dismantaled material from third floor to ground floor of the office building.): of area 3sqm and below

Dismantling tile in floor with mortar / Cement concrete floors or terrazo flooring of stair case laid in cement mortar including stacking material within 50 metre lead for thickness of tile with mortar / CC For thickness of tile floor or star case floor above 25 mm and up to 40 mm

Dismantling cement asbestos, gypsum ceiling, USG false ceiling, wall / Aluminium stripes ceiling or other hard board ceiling or aluminium and wooden partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead.(Note: Nothing extra will be paid for shifting / loading /unloading of the dismantaled material from third floor to ground floor of the office building.)

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground from CSIR Complerx or as approved by Engineer-in-charge, beyond municipal limit, for all leads including all lifts involved.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and paneling to be paid for separately) :

For fixed portion

Powder coated aluminium (minimum thickness of powder coating 50 micron)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required (Fittings shall be paid for separately).

Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing double action hydraulic floor spring of Ozone/Dorma make catalogue no. FS 9400 or equivalent or approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.

With stainless steel cover plate minimum 1.25 mm thickness.

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin-charge.

Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.00 mm thickness

Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge. 25 mm average thickness

Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, and applying anti rust primer befor bond coat all complete as per direction of Engineer-In-Charge.Bars upto 12 mm diameter

Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer.

Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) .25 mm average thickness in 2 layers. Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2).

Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of “L” shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as approved by Engineer-in-charge.

Providing and fixing 19 mm thick commercial board for covering shaft and dummy space wherever required including fixing wooden margins on exposed edges with necessary screws,adhesive etc as per direction of Engineer InCharge.

P& F designer frosted film of 3M and Garware or its equivalent on toughened glass partition and doors as per required pattern complete as per direction of Engineer-in-Charge

Providing & Fixing 6mm thick commercial plywood in pannelling or covering gaps etc with nails, adhesives etc complete.

P& Fixing vertical blinds 100mm wide soft textured acrylic of any shade of vista /mac or equivalent mak of approved quality,colour on existing windows including cost of all materials such as brackets, plugs, screws etc complete in all respect as per direction of Engineer in Charge.

Dismantling of wooden cupboards up to 60cm deep including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.(front area of cupboard shall be measured for payment)

P& F 40 to 50 cm deep customised storage cabinets at plane wall made out of 19mm thick commercial wooden board with horizontal shelves at every 400mm to 500mm height and vertical partition at every 600mm to 900mm intervals including shutter fixed with piano hinges, magnetic catcher, godrej brass lock 50mm with key and 100mm C.P brass handles and back of storage cabinet with 12mm thick ply and exposed surface of storage units shall be finished with 1.00mm thick lamination, Laminations shall be fixed with head less nails / adhesive with groove or without groov on all exposed surface of front/top/sides wooden board and second class teak wood 19mm x6mm margin on all all exposed surface of board edges and sides of shutters and shall be finished with melamine polish. The inner surface of storage unit shall be finished with two coat of synthetic enamel paint including primer & putty complete in all respect as per design and drawing. (front elevation area of storage unit shall be measured for the purpose of payment ).

Providing and fixing L-type Angle Size 50x50mm stainless steel grade 304 mirror finish (16GA) Standard duty angle shape corner guards (for covering the gap between lift face and vertical gratnite stone) with necessary screws etc using diamond bit for making hole on exisiting granite stone carefully complete as per direction of Engineer InCharge.

Buy Back Head

Buy back of dismantled flush door & window shutters with chowkats including all the fittings i.e. tower bolts , sliding door bolt and hydrolic door closer etc.and taking the same out of campus .- Of area less than 3.0 sqm.

Buy back of old dismantled 60cm deep wooden Cup board shutter and its fittings and taking the same out of campus. (Elevation area will be measured)

Buy back of old deteriorated MS stair case from terrace of 7th floor and taking the same out of campus.

Buy back of old deteriorated venation blinds with its fiitingsof 3rd floor and certificate room and taking the same out of campus.

Buy back of old deteriorated dismentled rolling shutter of meter room with its fiitings and machines and taking the same out of campus.

Furniture Head

High Back revolving Chair with head rest (Executive Chair) Supplying and placing in position chair of the following specifications. The cushioned seat assembly shall consists of insert moulded polyurethane foam upholstered with foam laminated mesh fabric. the insert moulded foam is assembeled over a load bearing plastic seat cover. The back shall made up of two piece injection moulded frame. The mechanism of chair shall have following features:360 degree revolving type, Front pivot Synchro mechanism, Tilt tension adjustment, 3 position tilt limiter with Anti-Shock feature. Spine bracket shall made of Aluminium diecast piece connecting back with mechanism. Neck rest assembly shall made up of polyurethane foam upholstered with foam laminated mesh fabric. The chair shall be provided with pneumatic height adjustment.The twin wheel castors shall be injection moulded in black plymer. The make of the chair will be as per the "List of Makes" attached (Godrej or Featherlite).

Mid Back revolving Visting Chair w/o head rest Supplying and placing in position chair of the following specifications. The cushioned seat assembly shall consists of insert moulded polyurethane foam upholstered with foam laminated mesh fabric. the insert moulded foam is assembeled over a load bearing plastic seat cover. The back shall made up of two piece injection moulded frame. The mechanism of chair shall have following features:360 degree revolving type, Front pivot Synchro mechanism, Tilt tension adjustment, 3 position tilt limiter with Anti-Shock feature. Spine bracket shall made of Aluminium diecast piece connecting back with mechanism. Neck rest assembly shall made up of polyurethane foam upholstered with foam laminated mesh fabric. The chair shall be provided with pneumatic height adjustment.The twin wheel castors shall be injection moulded in black plymer. The make of the chair will be as per the "List of Makes" attached (Godrej or Featherlite).

(Straight Modular Table) Modular Table - The system shall be a desk-based system with a platform understructure made up of a combination of MS. Tubes and plates.The slanted legs (SWING) are connected to the understructure with the help of PDC Connectors to provide a stable and sturdy base for the worktops. Modesty panel shall be of Metal 1.2 mm thick CRCA. Worktop shall be made of 25MM thick Pre-Laminated Board conforming to IS: 12823. All the edges of work surface shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue. It shall be a part of the understructure and can be in the form of enclosed metal tray to provide concealed wire management throughout the cluster formation. Wire riser leg shall be provided as per the layout structure. Free Standing Work top of Size 1500x750mm + 900 x 450 out of 25mm thick pre laminated edge banded top. Wooden front PVC Lipping pedestal consisting of one drawer box unit + one file cabinet with lockable shutter.Complete in all respect as per direction of E-in-C.The make of the chair will be as per the "List of Makes" attached (Godrej or Featherlite).

L-Type Modular workstations Providing and placing of panel & tile based modular workstations of size 1500 mm W1 x 1500W2 x 600mm(D) x 1200mm(overall Height) with partition thickness of 50 mm thick including powder coated aluminium trims and supported on Legs. Panels Construction - Each panel consists of Vertical extrusions 2 Nos and Horizontal extrusions made of 1.2mm thick aluminium with duly powder coated at every division of tile/block as per standard practice . Wire Management - Wires runs through the system from Bottom tile and extended to the top at various locations by the help of 2 nos. vertical Cable Ducts in each panels. Worksurface :Worktop of Size : 1200mm(L) X 600mm(D). Worktop shall be made out of 25mm thick prelam particle board. All the open edges of work surface shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue.Mobile Pedestal : Mobile Drawer Unit having 3 Drawers Unit having flat metal front and top with Central locking. The Drawer Unit consistes of 1 Box and 1 File Drawers with Key Board Pullout Tray and CPU Trolley.The product should be complete as per standard practice and as per the direction of Engineer-In-charge.The make of the chair will be as per the "List of Makes" attached (Godrej or Featherlite).

Straight Type Modular workstation Providing and placing of panel & tile based modular workstations of size 1200 mm(W) x 600mm(D) x 1200mm(overall Height) with partition thickness of 50 mm thick including powder coated aluminium trims and supported on Legs. Panels Construction - Each panel consists of Vertical extrusions 2Nos and Horizontal extrusions made of 1.2mm thick aluminium with duly powder coated at every division of tile/block as per standard practice. Wire Management - Wires runs through the system from Bottom tile and extended to the top at various locations by the help of 2 nos. vertical Cable Ducts in each panels. Worksurface :Worktop of Size : 1200mm(L) X 600mm(D). Worktop shall be made out of 25mm thick prelam particle board. All the open edges of work surface shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue.Mobile Pedestal : Mobile Drawer Unit having 3 Drawers Unit having flat metal front and top with Central locking. The Drawer Unit consistes of 1Box and 1File Drawers with Key Board Pullout Tray and CPU Trolley.The product should be complete as per standard practice and as per the direction of Engineer-In-charge.The make of the chair will be as per the "List of Makes" attached (Godrej or Featherlite).

SUB-HEAD: III : Electrical Work

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group C

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.

Group C

Supplying and fixing suitable size GI box with modular base and cover plate in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required.

Supplying and fixing suitable size GI box with modular base and cover plate in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

Supplying and fixing following modules, GI box along with modular base & cover plate for modular switches, sockets & electronic fan regulator in recess etc. as required.

(a) 1 or 2 Module

Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

(a) Telephone socket outlet (RJ 11 single with shutter)

(b) Modular type blanking plate

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 Amps, 240 volts “C” curve DP MCB complete with connections, testing and commissioning etc. as required.

Supplying and fixing call bell / buzzer suitable for single phase, 230 V, complete as required.

Supply and fixing of modular RJ 45 CAT6 I/O socket outlet on the modular single socket face plate and plastic gang box including connections complete etc. as required.

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

(a) 2 Pair

(b) 4 Pair

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

(a) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

(b) 4 X 2.5 sq. mm + 2 X 2.5 sq. mm earth wire

(c ) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

(d) 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Supplying of following Energy efficient recessed mounting direct / indirect high performance decorative LED luminaire / fittings in false ceiling, with all required drivers, accessories complete in all respect. (Make : Philips / Wipro)

(a) 600 x 600 mm LED flat panel 220 V, 50 Hz, 38 W LED Light Fitting complete with Cool White light of model: CRCO10R038HP65GL1 (Wipro)

(b) Down lighter LED (Round) 220 V, 50 Hz 7 Watt light Fitting with Cool White light DN 191B LED 6S 6500 PSU WH S1 (Philips) OR CRDL11R017HP57 - (Wipro)

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent/ LED panel fitting of all types complete with all accessories including chain etc. and tube / lamps etc. directly on ceiling / wall including connection with 1.5 Sq.mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Installation, testing and commissioning of wall bracket / ceiling fittings of all sizes and shapes containing upto two GLS / CFL / LED lamps per fitting, complete with all accessories including connections etc. as required.

Supplying, installation, testing & commissioning of wall mounting fan with regulator of 400 mm sweep 230V, 50 Hz AC with oscilation on wall / wood with the help of rawl plug and screws including connections etc complete in all respect.

Disconnecting & dismantling of existing flourescent fitting, switch, socket, switch board, Wall fan, Ceiling fan, Exhaust fan, LAN/Telephone point MCB box, DB Box, including wiring etc. and deposit the same in store complete as required.

Supplying, installatiion, testing and commissioning of beetel M59 model telephone instrument, caller ID display, 16 digit backlit LCD Display, 10 one touch memory, 37 incoming calls memory, 15 outgoing calls memory, 2 way speaker phone, programmable flash, music on hold, adjustable LCD contract, redial feature, hand free speaker including necessary accessories etc. complete as required.

Dismentaling & Reinstallation of Response Indicators/ Fire Hooter/ smoke Detector/ manual call point on wall/ ceiling including connection with 2 x 1.5 sqmm PVC insulated copper conductor in surface/ recess in existing PVC conduit including testing, commissioning, etc. as required.

Supply and fixing of GI box on surface or in recess with suitable size modular plate cover in the front including providing and fixing 3 Nos 5/6 Amps modular type socket outlet with 1No. 15 Amp modular type switch,connections, painting etc. complete as required.

Supplying and fixing following way, single pole and neutral,sheet steel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

8 way , Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Double pole

Salvage value for buy back of following old dismantled fittings

1.5 ton window type AC

ceiling fans/ wall mounting fans

single and double light fittings

SUB-HEAD: IV Air-conditining Units

Supply of following capacity single phase, 230 Volt, 50 Hz air cooled micro cool Cassette type air-conditioner (ceiling mounted) with energy efficient rotary compressor and microprocessor based logic control alongwith vibration pads for indoor unit, pressure testing, vacuuming, eco-friendly refrigerant gas charging, 100 % copper coil for indoor & outdoor units as per manufacturing technical specifications. Make: Hitachi / O ' General / Daikin

2.0 TR Star rating: 3

Installation of IDU & ODU of 2.0 TR Cassette Split (ceiling mounted) Air-Conditioner unit with necessary supports & fittings, pressure testing of copper pipes with nitrogen, vaccumising the system, internal wiring & drain leak test, testing and commissioning of units etc. complete as required.

Supply and fixing of 25 mm dia PVC hard drain pipe for above said cassette type / Split type air-conditioner units etc. complete as required.

Supplying and fixing of suitable size additional copper refrigerent pipe up to 2.0 TR cassette type air-conditioner unit with proper insulation including control wiring, power cable for interconnection of outdoor unit and indoor unit and drain pipe with insulation, accessories etc complete as required.

Supplying, fabrication and fixing of suitable size MS angles frame for cassette type / Split type air-conditioner unit duly painted for the split type AC onit duly painted for the above mentioned outdoor units etc complete as required.

Supplying and fixing of 3 core x 4.0 Sq.mm copper conductor, PVC Insulated & PVC round sheathed multicore bright annealed bare copper conductor flexible cable for voltage grade upto 1100 V as per IS:694/1990 including connections etc complete as required.

Disconnecting & dismantling of existing Window type / split type AC units upto 2.0 TR including wiring, copper pipe, drain pipe & all related accessories etc. complete as required.

SATBIR CONSTRUCTION COMPANY

S. N. ELECTRIC & MAINTENANCE PRIVATE LIMITED

ANAND AUTOMATIC SYSTEMS DELHI

Prabhakaran Rao