MISC B/R WORKS AND PERIODICAL SERVICES FOR DGQA UNIT LOCATED AT ARMAPUR ESTATE OF AGE B/R (FY) KANPUR UNDER GE (I) KANPUR

Amount

M/L for Preparation of old decorated surfaces of walls, cornices etc including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spots etc and applying one coat of white wash on wall complete all as specified and directed.

M/L for Preparation of old decorated surfaces of ceiling, including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spots etc and applying one coat of white wash on ceiling complete all as specified and and directed.

M/L for Preparation of old decorated surfaces of walls, cornices etc including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spots etc and applying one coat of cement base paint on wall with brush complete all as specified and directed.

Complete removal of existing treatment i.e. white wash ,colour wash ,distempering etc and applying Two coats of cement base paint (approved colour) over a coat of primer including preparation of old surface complete all as specified and directed.

Complete removal of existing treatment i.e. white wash, colour wash, cement paint etc. on wall and ceiling complete, with help of hand opeated sander or by manual where it is feasible and preparing the surfaces smooth including necessary repair to depressions/cracks by wall care putty/POP & apply a coat of exterior water based primer with aireless spray techonology with max working pressure of 3300 PSI by Trucare Graco machine/Airless paint sprayer (Vands Engineering solutions) / Airless sprayer machine Surya 9 (Jaguar) / Control Pro 190 Air paint sprayer (Wagner) and applying two coat of exterior weather proof anit algae (Product : Asian Paints Apex or equilvalent) 100% acrylic emulsion with maximum working pressure of 3300 PSI by Trucare Graco machine/Airless paint sprayer (Vands Engineering solutions) / Airless sprayer machine Surya 9 (Jaguar) / Control Pro 190 Air paint sprayer (Wagner) and capable of operational single spray gun with a maximum materials hose length 150m working,complete all as specified and directed.

M&L for Preparation of old decorated surfaces of walls, cornices etc including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spots etc and applying one coat of oil bound distemper (any Colour) on wall with brush complete all as specified and directed.

Complete removal of existing treatment i.e. white wash ,colour wash ,distempering etc. of wall complete , applying a coat of 1mm thick wall care putty with the help of machine (mechanically) on wall including rubbing with sand paper to achieve a smooth surface and sharp straight edges etc. complete as per manufacturer's instructions and directed at site and applying two coats of oil bound distemper (any colour) with the help of machine (mechanically) over a coat of primer complete all as specified and directed.

M&L for preparation of old painted surfaces of wood and wood based materials of any description not other wise described over 10 cm width or girth and applying one coat of Synthetic Enamel paint (any colour)complete all as specified and directed.

M&L for preparation of old painted surfaces of iron and steel based materials of any description not other wise described over 10 cm width or girth and applying one coat of Synthetic Enamel paint (any colour )complete all as specified and directed.

Demolition of brick work built in cement mortar complete all as specified and directed.

M&L Brick work with old size sub class ' B' bricks straight or curved on plan exceeding 6 mtr mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L Brick work (except bricks) old size sub class ' B' brick straight or curved on plan exceeding 6 mtr mean radius built in cement mortar (1:6) complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key scrubing down with water etc complete all as specifed and directed.

M&L 15mm thick rendering on fair faces of brick wall in CM (1:4) finished even & smooth complete with using WPC all as specified and directed. Note WPC shall be measured and paid separately.

M&L for 15 mm thick rendering in cement mortar (1:6) on fair faces of concrete or brick, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 5 mm thick cement plaster on ceiling in CM (1:3) finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls including cornices plaster etc and applying two coat oil bound distemper of any colour over a coat of primer over applying a coat of wall care putty on wall including rubbing with sand paper to achieve a smooth surface and sharp straight edges etc complete all as specified and directed.

M&L for preparation of new surfaces of wall and Applying two coats of cement base paint over a coat of primer on wall complete all as specified and directed.

M & L preparation of new surfaces of wall and applying three coats of white wash complete all as specified and directed.

M & L preparation of new surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.

M & L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with shade of tiles over and including 15mm thick screed bed in CM (1:4) complete all as specified and directed.

M & L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match with shade of tiles over and including 10 mm thick rendering in CM (1:4) complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 450x300 mm & 6 to 7 mm thick on vertical surface of walls such as in dado, skirting etc; including and jointing in neat cement slurry and pointed in white cement mixed with pigment to match with shade of tiles over and including 10mm thick rendering in CM(1:4) complete all as specified and directed

M&L for 7 to 8 mm thick non skid ceramic coloured tiles (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors etc; laid jointing in neat cement slurry and pointed in white cement mixed with pigment to match with shade of tiles over & including 15mm thick screed bed in CM(1:6) complete all as specified and directed.

Taking down chowkhat or frames with shutter (without taking off shutters from the frame) n. exc 1.5 sqm complete all as specified and as directed.

S&F aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy of 250 mm length of bolt complete all as specified and directed.

S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm single side prelam PVC sheet reinforced with MS Square tube edges will be painted to match with prelam sheet as per specification & drawing incl. making good the damaged wall with plaster or concrete complete all as specified and directed.

S & F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelam PVC Sheet on the front face & 2mm prelam PVC sheet on back face as per specification & drawing, complete as specified and directed.

S &F 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel pin, anodised and fixed, Type C-21, complete all as specified and directed.

Supply and fixing 150 mm aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 150mm size extuded aluminium handle fabricated type anodized complete all as specified and directed.

S&F 3 track window frame(124mmx50mm) shutter of uPVC solid foam profile window sill element FP 12419 (124mmx19mm thick) and 3 track sliding element FP 7132(71mmx32mm) grooved sill element. Sliding shutter are made of vertical and horizontal stile element FP7128(71mm Wx 28m thk) having GI 'C' section (39mmx19mmx19mmx0.60mm thick stiffener and telescopic 'L' corner, Infill panel is clear to translucent PC sheet Or 5 mm thick glass is fixed in the shutter using beading element 12 mm W x 10mm thk by SS headless nails including SS wirecloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with S.S staple pins window frame is strengthen by GI clamps (120x120x75mm) at all four corners. External /internal cover moulding/architrave is provided to cover gap between masonary wall and frame due to plumbing error in masonary work and elegant look all complete as specified and directed.

S&F, aluminium chequered grills , weight n.exc .0.50 kg / sqm and fixed all as specified and directed.

M&L for Easing of door / window shutters of any size / any number of panels for easy closing / opening tightening of hinges or changing the position of hinges adjustments of tower bolts, sliding bolts etc complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden /metal frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 3mm thick figured glass pin headed type and glazing with oil putty in squares n. exc 0.5sqm in each pane complete all as specified and directed.

S&F in 3mm thick Sheet glass ordinary quality and glazing with oil putty in square n. exc. 0.5 Sqm in each incl hacking out complete all as specified and directed.

S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and 1.40 mm averaage width of operature fixed with tinned tacks or galvanised wire staple complete all as speficied & directed.

S&F in repairs Sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specifed.

S&F in repair Towel rail 20mm dia, 60cm long brass chromium plated with brackets complete all as specified and directed.

S&F in repairs waste pipe for Sink/WHB/Urinal, length exc 0.75m complete all as specified and directed.

S&F in repairs, stainless steel curtain rods of 20mm dia as in doors/ windows pelmets.SS brackets fancy type , including screws and other necessary fitting for fixing brackets SS Funnels for 20 mm dia dropry rods, fixed at each end of rods complete all as specified and directed.

Taking down wall panelling,wooden flooring and similar work as specified and directed.

S & F 5mm thick plain/printed coloured PVC sheet in strips & channel feathered at the edges for fixing on solid PVC wall lining, Insulated PVC wall Lining, and solid PVC partitions inclusive of Solvent cement at site complete as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete as specified and directed.

Dismantling Wall & ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete as specified and directed.

S&F Anodised aluminium snap grid frame work for false ceiling all as specified 605 x 605mm complete as specified and directed.

S & F Hanger 6mm dia GI (upto 1200mm lenth) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flats 40 X 3mm size 60mm long complete as specified and directed.

Providing & fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete as specified and directed.

S & F in repair vitreous china wash basin white flat back of size 550mmx400mm excluding taps,but including waste coupling ,waste pipe,chain and plug and porcelain sstopper and brackets etc complete all as specified and directed.

S&F in repair Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I 500 Ltrs Capacity incl removing to store complete as specified and directed.

Supply only water proofing compound complete as specified and directed.

Sagar Electricals (BID ID -3102954)

Manoj Electricals (BID ID -3099560)

classic contriction co. (BID ID -3102764)

M/s Raghvendra Traders (BID ID -3102924)