E Quotation for the work of Renovation of Kitchen Area Inside JNPA Administration Building

Amount

Providing & Fixing of Temporary partition with GI Stud and Gypsum Panting finish

Removing Of Existing Plumbing & Draine line etc

2 Nos of 16A 5-pin sockets and 2 Nos 16A SP switch in suitable backbox along with front plate.

1 Nos of 16A 5-pin sockets and 1 Nos 16A SP switch in suitable backbox along with front plate.

Supply, Installation, Testing & commissioning of 3-Ph Power Sockets for Kitchen with 32A, 5Pin, Socket & Plug (3P+N+E) - 1no; 32A, FP MCB+ELCB (100mA) - 1no etc complete mounted in IP65 Box. Plug & Socket must be of IP65 Type. (Make- Legrand or equivalent ) or as per Direction by Engineer In Charge.

Blower for Exhaust

Kitchen Exhaust Blower to be 7.5 HP 960 Body to be fabricated from 4mm thick heavy duty MS Plates reinforced angles 40x40x5 for sturdy and smooth performance.Impellar to be dynamically balanced. Blower for Fresh Air

Kitchen Exhaust Blower to be 5 HP 960 Body to be fabricated from 4mm thick heavy duty MS Plates reinforced angles 40x40x5 for sturdy and smooth performance.Impellar to be dynamically balanced. Blower Stands

Exhaust Blower Stand

G.I. Sheet Metal Ducting (Rectangular) (Site Fabricated ) for Exhaust/Fresh Air/Plenum

0.80 MM (22 Gauge) : Exhaust Ducting

Fresh Air Grill (20 SWG) 300mm x 300mm

Ducting MS Bracket Support for Exhaust / Fresh Air

Blower Vibration Pad

Dampers : 20 SWG Aluminium, Angles & Flanged Joints

Providing & Fixing of 2TR split type A.C. 5 star rating with 100% cooper inside drain system etc complted make Volatas Etc

Work Counter With 2 U/S-Top Made Of 16 Gauge S.S. Sheets To Be Duly Matt Finished.25Mm X 25Mm X 3Mm Thick S.S. Angle For Framework. )Sound Dead-End Paint Is Applied On Bottom Of S.S. Top If Required.2 Nos Of 18 Gauges S.S. Under Shelves. )Legs Should Be 1.5" In Square 16 Swg S.S Pipe/Legs Fixed With Adjustable Nylon Bullet Feet.To Be Made In Ss 304-60"X26"X 34"Ht

Hot Baine Marie With 5 Container With 3 Side Closed & 1 U/S-Top Made Of 16 Gauge S.S. Sheets To Be Duly Matt Finished. 25Mm X 25Mm X 3Mm Thick S.S. Angle For Framework. Top Is Provided With Hot Baine Marie With 5 Slots Of 1/1 Size Gn Pans Deep 6" With Lids. 2 Nos 3Kw Single Phase Power Connection. There Should Be Provision For Water Inlet & Outlet. The Inlet & Outlet Arrangement Of Plumbing Should Have A Ball Valve Assembly Fixed With The Bain Marie. Legs Should Be 1.5" In Square 16 Swg S.S Pipe/Legs Fixed With Adjustable Nylon Bullet Feet. To Be Made In Ss 304 1 Nos Of 18 Gauges S.S. Under Shelve.-72"X 26"X 34"Ht

G.N.Pan With Lid-6 Nos Of 1/1 Gn Pans Deep Of 6". To Be Made In Ss 304-1/1 Size Gn Pans

Work Counter With 2 U/S-Top Made Of 16 Gauge S.S. Sheets To Be Duly Matt Finished. 25Mm X 25Mm X 3Mm Thick S.S. Angle For Framework. )Sound Dead-End Paint Is Applied On Bottom Of S.S. Top If Required. 2 Nos Of 18 Gauges S.S. Under Shelves . Legs Should Be 1.5" In Square 16 Swg S.S Pipe/Legs Fixed With Adjustable Nylon Bullet Feet. To Be Made In Ss 304-57"X26"X34"Ht

2 Burner Gas Range With Pipe U/S-16 Swg. Stainless Steel Top, Supported With 2Mm M.S. Sheet With Heat Insulation Of 3Mm.)19 Swg. Stainless Steel Perforated Sides. 25Mm X 25Mm X 3Mm Thick Ms Angle For Framework. 2 Nos M-50 (1,00,000 Btu/Hr) Lpg Operated 2 Pilots To Be Provided..)All Burners Should Be Provided With Needle Control Values And Pilot. Legs Should Be 1.5" In Square 16 Swg S.S Pipe/Legs Fixed With Adjustable Nylon Bullet Feet. The Casting Size Should Be 14" X 14", 2 Nos. 3" Offsets From Back Side To Be Provided For Provision Of Any Mep Services. Soil Trays To Be Provided. To Be Made In Ss 304-48"X24"X34"Ht+6"

S.S. Hood With Filter-Hoods Should Be Island Type Made Of 18 Swg S.S 304. Baffle Filters Should Be Made Of 19 Swg Border & 20Swg Filters. Should Be Fitted In Hoods. The Hood Should Have Light Arrangements. )Exhaust Cut Out And Spot Cooling Cut Outs (If Any) Should Be Made As Per Hvac Vendor Requirement. Proper Partition Should Be Given In Island Hoods)Proper Stifners Should Be Provided For Strengthening The Hoods Having More Than 2 Mtrs Length. All Hoods Drawings And Cut Out Should Made In Consulataion With Hvac Consulatant / Vendor. To Be Made In Ss 304-50"X26"X21"Ht

3 Burner Gas Range With Pipe U/S-16 Swg. Stainless Steel Top, Supported With 2Mm M.S Sheet With Heat Insulation Of 3Mm. 19 Swg. Stainless Steel Perforated Sides. 25Mm X 25Mm X 3Mm Thick Ms Angle For Framework. 3 Nos M-50 (1,00,000 Btu/Hr) Lpg Operated 3 Pilots To Be Provided. All Burners Should Be Provided With Needle Control Values And Pilot. Legs Should Be 1.5" In Square 16 Swg S.S Pipe/Legs Fixed With Adjustable Nylon Bullet Feet. The Casting Size Should Be 16" X 16", 3 Nos. 3" Offsets From Back Side To Be Provided For Provision Of Any Mep Services. Soil Trays To Be Provided. To Be Made In Ss 304-76"X30"X 34"Ht+6"

Masala Trolley With 6" Dia 8 Container & 1 U/S With Heavy Duty Castor Wheel-16 Swg Stainless Steel Top . 18 Swg Stainless Steel 1 Under Shelf. Provision For 6" ∅ Size, 8 Round / Square Container Slots. 18 Swg Stainless Steel Tank For Containers. 4" ∅ X 1.5" Thick Heavy Duty Rubberized Castor Wheels 4 Nos. 2 Wheels Of Brakes & 2 Wheels Without Brakes. To Be Made In Ss 304-36" X18"X 34"Ht

Work Counter With 2 U/S-Top Made Of 16 Gauge S.S. Sheets To Be Duly Matt Finished. 25Mm X 25Mm X 3Mm Thick S.S. Angle For Framework. Sound Dead-End Paint Is Applied On Bottom Of S.S. Top If Required. 2 Nos Of 18 Gauges S.S. Under Shelves.Table Has 6" Height Back Splash. )Legs Should Be 1.5" In Square 16 Swg S.S Pipe/Legs Fixed With Adjustable Nylon Bullet Feet. )3" Offsets From Back Side To Be Provided For Provision Of Any Mep Services. To Be Made In Ss 304-52"X32"X 34"Ht+6"

2 Burner Gas Range With Pipe U/S-16 Swg. Stainless Steel Top, Supported With 2Mm M.S. Sheet With Heat Insulation Of 3Mm. 19 Swg. Stainless Steel Perforated Sides. 25Mm X 25Mm X 3Mm Thick Ms Angle For Framework. 2 Nos M-50 (1,00,000 Btu/Hr) Lpg Operated 2 Pilots To Be Provided. All Burners Should Be Provided With Needle Control Values And Pilot. Legs Should Be 1.5" In Square 16 Swg S.S Pipe/Legs Fixed With Adjustable Nylon Bullet Feet. The Casting Size Should Be 14" X 14", 2 Nos. 3" Offsets From Back Side To Be Provided For Provision Of Any Mep Services. Soil Trays To Be Provided. To Be Made In Ss 304-48"X 32" X34"Ht+6"

S.S Hood Iland Type-Hoods Should Be Island Type Made Of 18 Swg S.S 304. Baffle Filters Should Be Made Of 19 Swg Border & 20Swg Filters. Should Be Na Fitted In Hoods. The Hood Should Have Light Arrangements.Exhaust Cut Out And Spot Cooling Cut Outs (If Any) Should Be Made As Per Hvac Vendor Requirement. )Proper Partition Should Be Given In Island Hoods. Proper Stifners Should Be Provided For Strengthening The Hoods Having More Than 2 Mtrs Length. All Hoods Drawings And Cut Out Should Made In Consulataion With Hvac Consulatant/Vendor To Be Made In Ss 304-100"X 72" X18"Ht

Work Counter With 2 U/S-Top Made Of 16 Gauge S.S. Sheets To Be Duly Matt Finished. 25Mm X 25Mm X 3Mm Thick S.S. Angle For Framework. Sound Dead-End Paint Is Applied On Bottom Of S.S. Top If Required. 2 Nos Of 18 Gauges S.S. Under Shelves. Table Has 6" Height Back Splash. Legs Should Be 1.5" In Square 16 Swg S.S Pipe/Legs Fixed With Adjustable Nylon Bullet Feet. To Be Made In Ss 304-66"X 26" X34"Ht+6"

Work Table With 2 U/S-Top Made Of 16 Gauge S.S. Sheets To Be Duly Matt Finished. 25Mm X 25Mm X 3Mm Thick S.S. Angle For Framework. Sound Dead-End Paint Is Applied On Bottom Of S.S. Top If Required. 2 Nos Of 18 Gauges S.S. Under Shelves. Table Has 6" Height Back Splash. Legs Should Be 1.5" In Square 16 Swg S.S Pipe/Legs Fixed With Adjustable Nylon Bullet Feet. To Be Made In Ss 304-48'' X30'' X34''Ht+6"

Idli Boiler Electric-1 Deck Idli Machine, Capacity 90 Idlies. Containing 6 Trays, Per Tray Has 9 Idlies Slots With Deep Trays. Electric Operated, 3Kw Heater, Rubberized Gasket Doors. Whole Body Made Of 18 Gauge S.S. Sheet Duly Matt Finished.-90 Idli'S

Dosa Bhatti With Pipe U/S-Top Is Made Of 16 Swg S.S. Sheets Which Are Duly Matt Finished. 25Mm X 25Mm X 3Mm Thick S.S. Angle For Framework. Hotplate Has 6" Height Of Back Splash. 2 Nos Of V–950 (70,000 Btu/Hr) For Hot Plate, L.P.G. Operated Burners Are Used With 1 Nos. Pilot, With Ignition Window And Oil Collection Tray. Hot Plate Should Be Made Of M.S 18Mm Thickness Covered With Top. Three Side Up By 10Mm With Ms Angle Covering The Whole Plate. S.S. Front Panel, With Needle Control Valves For Burners And Pilots. Legs Should Be 1.5" In Square 16 Swg S.S Pipe/Legs Fixed With Adjustable Nylon Bullet Feet. 3" Offsets From Back Side To Be Provided For Provision Of Any Mep Services. The Groove Should Made On The Top Of The Range With Slope To Collect Oil In Box. 19 Swg. Stainless Steel Perforated Sides. To Be Made In Ss 304-48'' X30'' X34''Ht+6"

S.S.Hood With Filter-Hoods Should Be Island Type Made Of 18 Swg S.S 304. Baffle Filters Should Be Made Of 19 Swg Border & 20Swg Filters. Should Be Fitted In Hoods. The Hood Should Have Light Arrangements. )Exhaust Cut Out And Spot Cooling Cut Outs (If Any) Should Be Made As Per Hvac Vendor Requirement. Proper Partition Should Be Given In Island Hoods. Proper Stifners Should Be Provided For Strengthening The Hoods Having More Than 2 Mtrs Length. All Hoods Drawings And Cut Out Should Made In Consulataion With Hvac Consulatant/Vendor. To Be Made In Ss 304-50" X32" X21"Ht

Work Table With 2 U/S-Top Made Of 16 Gauge S.S. Sheets To Be Duly Matt Finished. 25Mm X 25Mm X 3Mm Thick S.S. Angle For Framework. Sound Dead-End Paint Is Applied On Bottom Of S.S. Top If Required. 2 Nos Of 18 Gauges S.S. Under Shelves. Table Has 6" Height Back Splash.)Legs Should Be 1.5" In Square 16 Swg S.S Pipe/Legs Fixed With Adjustable Nylon Bullet Feet. 3" Offsets From Back Side To Be Provided For Provision Of Any Mep Services. To Be Made In Ss 304-54"X 30"X 34"Ht+6"

Chappati Hot Plate With Puffer & Pipe Shelf-Top Is Made Of 16 Gauge S.S. Sheets Which Are Duly Matt Finished. 25Mm X 25Mm X 3Mm Thick S.S. Angle For Framework. Hotplate Has 6" Height Back Splash. 2 Nos Of V–700 (70,000 Btu/Hr) For Hot Plate And 1 Nos Of V-350 (70,000 Btu/Hr) For Puffer Plate L.P.G. All Operated Burners Are Used With Pilot, With Ignition Window And Oil Collection Tray. Hot Plate Should Be Made Of Ms 18Mm Thickness Covered With Top As Provided With Puffer Plate On Right Hand Side. S.S. Front Panel, With Needle Control Valves For Burners And Pilots. )Legs Should Be 1.5" In Square 16 Swg S.S Pipe/Legs Fixed With Adjustable Nylon Bullet Feet. 3" Offsets From Back Side To Be Provided For Provision Of Any Mep Services. )The Groove Should Made On The Top Of The Range With Slope To Collect Oil In Box. 19 Swg. Stainless Steel Perforated Sides.-48"X 30" X34"Ht+6"

Soiled Dish Landing Trolley With Heavy Duty Castor Wheel-18 Swg. Stainless Steel Body. 1.5" ∅ 16 Swg Thk S.S. 304 Quality Pipe. 4" ∅ X 1.5" Thick Heavy Duty Rubberized Castor Wheels (Pin Type) 4 Nos, (2 Nos. Lock Provision.) To Be Made In Ss 304-36"X 24" X34"Ht

Dish Landing Table With Garbage Chute-Top Made Of 16 Gauge S.S. Sheet To Be Duly Matt Finished. 25Mm X 25Mm X 3Mm Thick S.S. Angle For Framework. Sound Dead-End Paint Is Applied On Bottom Of S.S. Top If Required. 1" Square S.S. Pipe For Cross Braising. Legs Should Be 1.5" In Square 16 Swg S.S Pipe/Legs Fixed With Adjustable Nylon Bullet Feet. Construction Of S.S. With Raised 2" Border Type Lipping Closed On Three Sides. 8" ∅ Chute Located On The Right Hand Side On The Table. Table Has 6" Height Of Back Splash. To Be Made In Ss 304-54"X 24"X 34"Ht+6"

Crockery Washing 3 Sink Unit-Top Is Made Of 16 Gauge Ss Sheet Which Is Duly Matt Finished. 25Mm X 25Mm X 3Mm Thick S.S Angle For Frame Work. Sound Dead-End Paint Is Applied On Bottom Of Ss Top If Required. Table Has 6" Height Of Back Splash. Legs Should Be 1.5" In Square 16 Swg S.S Pipe / Legs Fixed With Adjustable Nylon Bullet Feet. 3Nos S.S. Sink Of Size 18" L X 18" W X 12" Deep With 1.5" Drain. Table Has 20 Swg Front Side Closed. 1" Square S.S. Pipe For Cross Braising. To Be Made In Ss 304-66"X 30" X34"Ht+6"

Wall Mounted Plate Drain Rack-Shelf Have 18 Guage S.S. Body. Bolting Arrangement Provision Should Be Provided For Wall Hanging. To Be Made In Ss 304-66" X12"

S.S.Vented Storage Rack-18 Swg. 3 Nos Perforated Stainless Steel Shelves With With 1.5" Border 3 Sides Up And Front Side Down. Legs Should Be 1.5” In Square Ss Pipe Legs Fitted With Nylon Adjustable Bullet Feet. All Shelfs Should Have Equal Distance. To Be Made In Ss 304-36" X24"X 66"Ht

S.S.Vented Storage Rack-18 Swg. 3 Nos Perforated Stainless Steel Shelves With With 1.5" Border 3 Sides Up And Front Side Down. Legs Should Be 1.5” In Square Ss Pipe Legs Fitted With Nylon Adjustable Bullet Feet. All Shelfs Should Have Equal Distance. To Be Made In Ss 304-40"X 18" X66"Ht

S.S.Vented Storage Rack-18 Swg. 3 Nos Perforated Stainless Steel Shelves With With 1.5" Border 3 Sides Up And Front Side Down. Legs Should Be 1.5” In Square Ss Pipe Legs Fitted With Nylon Adjustable Bullet Feet. All Shelfs Should Have Equal Distance. To Be Made In Ss 304-60" X24" X66"Ht

Handwash Sin-Top Is Made Of 16 Gauge S.S. Sheet Which Is Duly Matt Finished. 25Mm X 25Mm X 3Mm Thick S.S. Angle For Framework. Sound Dead-End Paint Is Applied On Bottom Of S.S. Top If Required. 1" Square S.S. Pipe For Cross Braising. Table Has 6" Height Of Back Splash. Legs Should Be 1.5" In Square 16 Swg S.S Pipe/Legs Fixed With Adjustable Nylon Bullet Feet. 1 Nos S.S. Sink Of Size 12" L X 12" W X 12" Deep With 1.5" Drain. Sink Has 20 Swg Front Side Closed. To Be Made In Ss 304-16" X16"X 34"Ht+6"

Computer Table 3 Side Closed, 2 Drawers & 2 U/S With 2 Openable Drawers With Lock-Top Made Of 16 Gauge S.S. Sheets To Be Duly Matt Finished. 25Mm X 25Mm X 3Mm Thick S.S. Angle For Framework. Sound Dead-End Paint Is Applied On Bottom Of S.S. Top If Required. 2 Nos Of 18 Gauges S.S. Half Under Shelves. )Legs Should Be 1.5" In Square 16 Swg S.S Pipe/Legs Fixed With Adjustable Nylon Bullet Feet. Table Has 20 Swg 3 Side Closed. The Drawers Should Come Withpull Out Facility In The Front. Lock Provision To Be Made. To Be Made In Ss 304-48"X 24" X34"Ht

Staff Locker With 9 Compartment-Unit Shall Be Made Of 22 Powder Coated Colour Ms, 22 Swg Lock, Locker Doors Shall Be Flush, Having , Heavy Duty Butt Type Hinges Each Compartment Shall Have Horizontal Louvers The Front Side. To Be Made In Ms-36" X16" X72"Ht

Staff Locker With 12 Compartment-Unit Shall Be Made Of 22 Powder Coated Colour Ms, 22 Swg Lock, Locker Doors Shall Be Flush, Having , Heavy Duty Butt Type Hinges Each Compartment Shall Have Horizontal Louvers The Front Side. To Be Made In Ms-30"X 16" X72"Ht

Pot Rack With 4 Shelves-Outside 25Mm ∅ X 16 Swg. Thk. S.S. 304 Quality Pipe. Na 2)Indise 20Mm ∅ X 16 Swg. Thk. S.S. 304 Quality Pipe. All Shelfs Should Have Equal Distance. Gap Between The Two Pipe 4" Center To Center. Legs Should Be 1.5" ∅ S.S. Pipe Legs Fitted With Nylon Adjustable Bullet Feet. All Welding Works To Be Done In Argon Arc And Well Finished. Inner Pipes Of Shelf To Be Fitted On Pipe & Socket Hole Type With Cladding No Welding Done. To Be Made In Ss 304-54"X 24"X 66"Ht

Potato Peeler - 20 Kg-Capacity As Required. The Unit To Be Mounted On A Stand Made Of S.S 16 Swg 304 With Suitable Arrangement For Accommodating Drain Pipe Of The Peeler. The Unit Should Have A Safety Mechanism By Which If The Door Opened The Unit Should Stopped.) The Abrasive On The Disk Shall Be Fiberglass Carborundum And The Disk Should Be Easily Removable For Maintenance & Cleaning. Unit Shall Be Provided With A Hose Connector. It Should Be Fitted With 1 Hp Motor For 3-Phase Operation.-Std

Pulverizer 3 Phase - 7 Hp-Inner Frame Is Made Of Ss 304 Grade Stainless Steel. It Reduces The Grinding Time Drastically And Make The Job Very Easy . There Are No Adjustments Or Tightening Required To Control The Grinding. 7Hp Motor Required-Std

Tilting Type Masala Grinder - 20 Ltr-Stainless Steel Construction , Capacity: 20 Ltr, The Roller Stone Assembly Is Fitted With Wiper To Ensure 100% Grinding In Quicker Time , Unique Adjustable Load Balancing System Provided For Even Spread Of Load And For Very Efficient Grinding-Std

2 Door Vertical Deep Freezer -600 Ltr-20 Swg. Stainless Steel Front Panel & Doors, 20 Swg. Stainless Steel Sides & Rear, 22 Swg. Stainless Steel Interior, P.U.F. Insulation, -5°C To -15°C Temperature Range, To Be Provided With Adj. Ss Shelves, Two Separate Partition. To Be Made In Ss 304-27"X30"X80"Ht

4 Door Vertical Refregerator - 1200 Ltr-20 Swg Stainless Steel Front Panel & Doors , 20 Swg Stainless Steel Side & Rear, 22 Swg Stainless Steeel Interior , P.U.F Insulation , 0°C To +5°C Temperature Range, To Be Provided With Adjustable Ss Shleves Four Separate Partition. To Be Made In Ss 304-48"X30"X80"Ht

S.S.Vented Storage Rac-18 Swg. 4 Nos Perforated Stainless Steel Shelves With With 1.5" Border 3 Sides Up And Front Side Down.) Legs Should Be 1.5” In Square Ss Pipe Legs Fitted With Nylon Adjustable Bullet Feet, All Shelfs Should Have Equal Distance. To Be Made In Ss 304-48" X24"X 72"Ht

S.S.Gunny Pilot-16 Swg 1.5" Square Pipe For Frame Work, 1.5" Ss Sq Pipe With Adjustable Nylon Bullet Feet Inside 1" Ss Sq Pipe 16 Swg. Thk Ss 304 Quality Pipe. Gap Between The Two 1" Pipe Is 5" Center To Center, ) To Be Made In Ss 304-66"X 48"X 10"Ht

S.S.Vented Storage Rack-18 Swg. 4 Nos Stainless Steel Shelves With 1.5" Border 3 Sides Up And Front Side Down. Legs Should Be 1.5” In Diameter S.S Pipe Legs Fitted With Nylon Adjustable Bullet Feet.) All Shelves Should Have Equal Distance. To Be Made In Ss 304-48" X18"X 72"Ht

S.S. Onion & Potato Bin-Made Of S.S. 12Mm X 12Mm Wire Mesh From All Sides. Opening On Top For Loading And Opening From Downside For Taking Out The Materials. Heavy Duty Castor Wheels Should Be Provided With Slope In Front Side For Easy Flow Of Materials. S.S. Angles Of 25Mm X 25Mm X 3Mm Thick For Framework.) To Be Made In Ss 304-48"X 24"X 48"Ht

Vegetable Basket Storage Rack-18 Swg. 4 Nos Stainless Steel Shelves With 1.5" Border 3 Sides Up And Front Side Down. Legs Should Be 1.5" In Diameter S.S. Pipe Legs Fitted With Nylon Adjustable Bullet Feet. All Shelves Should Have Equal Distance. To Be Made In Ss 304-24"X24"X 72"Ht

Neel Kamal P.V.C. Basket-Closed From 4 Sides And Bottom And Open From Top , Size : 400 X 300 X 220, Food Grade Hdpe Material-Std

S.S.Grating With Jali & Angle Frame-The Drainage Channel For Grating Should Be Sloped Towards The Middle And In Longitudinal Direction To Secure Best Hygiene.)The Back Of The Frame Is To Be Filled With Epoxy Or Concrete At The Site To Stabilize The Frame And Supplied At Time Of Tile Work , Channel Should Be Made In 2 Mm Ss 304 Welded With A Security Crossbar.The Slope Towards Outlet Is 1%.Round Hygienic Outlet In Side Within The General Frame Of Channel. Channel Height Is 6" Deep Serrated Grating In Ss 304 With 25Mm X 3Mm @ 25Mm Pitch. To Be Made In Ss 304-24" X10"

S.S.Grating With Jali & Angle Frame-The Drainage Channel For Grating Should Be Sloped Towards The Middle And In Longitudinal Direction To Secure Best Hygiene.) The Back Of The Frame Is To Be Filled With Epoxy Or Concrete At The Site To Stabilize The Frame And Supplied At Time Of Tile Work , Channel Should Be Made In 2 Mm Ss 304 Welded With A Security Crossbar. The Slope Towards Outlet Is 1%.Round Hygienic Outlet In Side Within The General Frame Of Channel. Channel Height Is 6" Deep Serrated Grating In Ss 304 With 25Mm X 3Mm @ 25Mm Pitch. To Be Made In Ss 304-12"X 12"

S.S.Platform Trolley With Heavy Duty Castor Wheel-16 Swg. Ss Body. , 25Mm X 25Mm X 3Mm Thick S.S. Angle For Frame Work, 1.5" Ss Pipe For Handle 4" ∅ X 1.5" Thick Heavy Duty Rubberized Castor Wheels (Pin Type) 4 Nos, (2 Nos. Lock Provision) To Be Made In Ss 304-36" X24"X 36"Ht

Kitchen Utility Trolley With Heavy Duty Castor Wheel-18 Swg. Stainless Steel Body. 1.5" ∅ 16 Swg Thk S.S. 304 Quality Pipe.4" ∅ X 1.5" Thick Heavy Duty Rubberized Castor Wheels (Pin Type) 4 Nos, (2 Nos. Lock Provision), To Be Made In Ss 304-36" X24"X 36"Ht

S.S.Dinning Table 6 Seater With Folding Stool-Completely Fabricated In S.S 304. , Top Will Be In 18 Swg S.S 304, Pipes Will Be Of 18 Swg And 1.5" Size S.S 304.Will Come With Round Suitable Seat.)Foldable Stools To Be Provided And Same. To Be Made In Ss 304-72"X32"X 30"Ht

Gas Bank Cabinet With Door 6+6 Cylinder

Gas Manifold For 6+6 Cylinders

Non Return Valve (Nrv)

Cylinder Pigital

Click On Adaptor

Copper Cylinder Pigital

Regulator

Pressure Gauge With Valve

1/2" Ball Valve

Fitting For Ball Valve

Burner Pigital

1/2" Flash Back Arestor With Fitting

1/2" Tata Pipe

1/2" M-Clamp

M.S. Coupling

1" M.S. Elbow

Air Testing, Installation & Transportation Charges

SITC of MS ERW Black Pipe as Per IS : 3589 / 6.3mm thick Gr. Fe 410 & IS 1239 / I- 'C' Class, with Fittings to suiitable pipe Fabricated IS : 3589 / 6.3mm thick / IS : 1239 / II - Heavy Grade, including MS Plate Fabricated Flanges to IS / DIN / ASA 150 LBS Mtring & Aboveground Pipe Protection (Painting) and all required 'supports etc. 65 mm NB ‘C’ Class

SITC of MS ERW Black Pipe as Per IS : 3589 / 6.3mm thick Gr. Fe 410 & IS 1239 / I- 'C' Class, with Fittings to suiitable pipe Fabricated IS : 3589 / 6.3mm thick / IS : 1239 / II - Heavy Grade, including MS Plate Fabricated Flanges to IS / DIN / ASA 150 LBS Mtring & Aboveground Pipe Protection (Painting) and all required 'supports etc. 40 mm NB ‘C’ Class

SITC of MS ERW Black Pipe as Per IS : 3589 / 6.3mm thick Gr. Fe 410 & IS 1239 / I- 'C' Class, with Fittings to suiitable pipe Fabricated IS : 3589 / 6.3mm thick / IS : 1239 / II - Heavy Grade, including MS Plate Fabricated Flanges to IS / DIN / ASA 150 LBS Mtring & Aboveground Pipe Protection (Painting) and all required 'supports etc. 32 mm NB ‘C’ Class

SITC of MS ERW Black Pipe as Per IS : 3589 / 6.3mm thick Gr. Fe 410 & IS 1239 / I- 'C' Class, with Fittings to suiitable pipe Fabricated IS : 3589 / 6.3mm thick / IS : 1239 / II - Heavy Grade, including MS Plate Fabricated Flanges to IS / DIN / ASA 150 LBS Mtring & Aboveground Pipe Protection (Painting) and all required 'supports etc. 25 mm NB ‘C’ Class

Clean gas Agent ( NAF P IV )

S/I/T/C of Addressable Stob Light Hooter

S/I/T/C of Addressable Relay Out Put Module

Tathastu Infrastructure (BID ID -3122237)

JAYANT K FURNISHERS (BID ID -3122366)

Bidder Name

Design Edge Studio