Loading
Loading…
Loading…
Tender Value
₹2.8 Cr
EMD Value
₹5.5 L
Closing Date
3 Aug 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Fund (DRF)
CIVIL MTN
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
(a) The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b) (1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract.
Defination of Similar Work :- Any Civil Engineering works involving construction/modification/repair and maintenance of building/structure involving general construction activities viz concreting, masonry etc.
4 conditions
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
COMPLETION PERIOD The Contractors shall have to complete the work in all respects within a period of 10 (Ten) months including monsoon from the date issue of acceptance of the tender. The Contractor s will have to employ labour in full strength commensurate with working areas available. He will also arrange for materials and equipments to complete the job most expeditiously within the stipulated completion period. The Engineer s decision as to what is full strength will be final. He should also submit bar-chart for completing the work in time. The contractor/s will be required to maintain speedy and required progress to the satisfactions of the Engineer to ensure that the work will be completed in all respects within the stipulated period failing which action may be taken by the Railway Administration in terms of Clause 17 and/or clause 62 of the General Conditions of Contract, 2022. MAINTENANCE PERIOD The tenderer s shall be required to maintain the work effectively for a period of 12 (twelve) months from the date of completion as per Clause No.47 of the General Conditions of Contract 2022 and no part refund of Security Deposit shall be permitted during the maintenance period mentioned above.
Replacement of old water pipeline and Sluice valves, Replacement of old sewerage system
WKS-1483-DC
WKS-1483-DC
Open
Works - General
10 Months
Lucknow, Uttar Pradesh
₹0
₹5.5 L
3 Aug 2026
7 Jul 2026
20 Jul 2026
77 items across 1 schedule · ₹3,52,11,281.55 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | DSR Item No 2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. | cum | 9500.00 | 218.6 | 20,76,700 |
| 2 | DSR Item No 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | cum | 4160.00 | 161.6 | 6,72,256 |
| 3 | DSR Item No 2.31 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. | Sqm | 3200.00 | 14.5 | 46,400 |
| 4 | DSR Item No 2.32 Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. | Sqm | 1920.00 | 7.4 | 14,208 |
| 5 | DSR Item No 4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 20.00 | 7,365.15 | 1,47,303 |
| 6 | DSR Item No 4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) | cum | 390.00 | 6,326 | 24,67,140 |
| 7 | DSR Item No 5.3 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). | cum | 45.00 | 10,391.4 | 4,67,613 |
| 8 | DSR Item No 5.22.4 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Hot rolled deformed bars | Kg | 7965.00 | 89.65 | 7,14,062.25 |
| 9 | DSR Item No. 6.1.2 Brick work with common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 580.00 | 6,658.25 | 38,61,785 |
| 10 | DSR Item No 6.4.2 Brick work with common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 5.00 | 8,288.4 | 41,442 |
| 11 | DSR Item No 10.1 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 450.00 | 93.05 | 41,872.5 |
| 12 | DSR Item No 10.25.2 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | Kg | 4500.00 | 142.3 | 6,40,350 |
| 13 | DSR Item No 12.41.2 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter | Metre | 1550.00 | 319.75 | 4,95,612.5 |
| 14 | DSR Item No 12.42.5.2 Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion Bend 87.5° 110 mm bend | Numbers | 210.00 | 132 | 27,720 |
| 15 | DSR Item No 12.42.6.2 Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion Shoe (Plain) 110 mm Shoe | Numbers | 210.00 | 115.95 | 24,349.5 |
| 16 | DSR Item No 12.43.2 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm | Numbers | 670.00 | 310.85 | 2,08,269.5 |
| 17 | DSR Item No 13.4.2 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) | Sqm | 2260.00 | 294.35 | 6,65,231 |
| 18 | DSR Item No 13.18 Neat cement punning | Sqm | 2000.00 | 67.8 | 1,35,600 |
| 19 | DSR Item No 15.2.1 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) | cum | 8.00 | 2,007.1 | 16,056.8 |
| 20 | DSR Item No 15.7.4 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar | cum | 20.00 | 1,698.45 | 33,969 |
| 21 | DSR Item No 15.60 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | cum | 60.00 | 219.3 | 13,158 |
| 22 | DSR Item No 16.13.1 Cutting road and making good the same including supply of extra quantities of materials i.e. aggregate, moorum screening, red bajri and labour required. bituminous portion | cum | 10.00 | 4,157.8 | 41,578 |
| 23 | DSR Item No 16.13.2 Cutting road and making good the same including supply of extra quantities of materials i.e. aggregate, moorum screening, red bajri and labour required. Water bound macadam | cum | 10.00 | 2,592.15 | 25,921.5 |
| 24 | DSR Item No 18.9.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 15 mm nominal dia Pipes | Metre | 640.00 | 221.35 | 1,41,664 |
| 25 | DSR Item No 18.9.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 20 mm nominal dia Pipes | Metre | 960.00 | 275.25 | 2,64,240 |
| 26 | DSR Item No 18.9.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 25 mm nominal dia Pipes | Metre | 960.00 | 370.65 | 3,55,824 |
| 27 | DSR Item No 18.9.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 32 mm nominal dia Pipes | Metre | 720.00 | 435.05 | 3,13,236 |
| 28 | DSR Item No 18.12.3 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 25 mm dia nominal bore | Metre | 80.00 | 417.95 | 33,436 |
| 29 | DSR Item No 18.12.5 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 40 mm dia nominal bore | Metre | 64.00 | 558.35 | 35,734.4 |
| 30 | DSR Item No 18.12.6 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 50 mm dia nominal bore | Metre | 96.00 | 654.2 | 62,803.2 |
| 31 | DSR Item No 18.12.8 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 80 mm dia nominal bore | Metre | 80.00 | 919.1 | 73,528 |
| 32 | DSR Item No 18.13.1 Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore | Numbers | 240.00 | 757.1 | 1,81,704 |
| 33 | DSR Item No 18.13.2 Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 50 to 80 mm nominal bore | Numbers | 192.00 | 1,513.65 | 2,90,620.8 |
| 34 | DSR Item No 18.17.1 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 25 mm nominal bore | Numbers | 64.00 | 532.35 | 34,070.4 |
| 35 | DSR Item No 18.17.3 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 40 mm nominal bore | Numbers | 64.00 | 707.3 | 45,267.2 |
| 36 | DSR Item No 18.17.4 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 50 mm nominal bore | Numbers | 56.00 | 878.25 | 49,182 |
| 37 | DSR Item No 18.26.1 Providing and laying flanged C.I. standard specials such as tees, bends, collars, tapers, caps etc., suitable for flanged jointing as per IS : 1538 : Up to 300 mm dia | Quintal | 35.00 | 8,191.75 | 2,86,711.25 |
| 38 | DSR Item No 18.27.1 Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS - 1536 : 100 mm dia pipe | Numbers | 400.00 | 1,210.5 | 4,84,200 |
| 39 | DSR Item No 18.27.3 Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS - 1536 : 150 mm dia pipe | Metre | 480.00 | 1,824.7 | 8,75,856 |
| 40 | DSR Item No 18.28.1 Providing lead caulked joints to spun iron or C.I. pipes and specials, including testing of joints but excluding the cost of pig lead : 100 mm diameter pipe | Each | 80.00 | 410.25 | 32,820 |
| 41 | DSR Item No 18.28.3 Providing lead caulked joints to spun iron or C.I. pipes and specials, including testing of joints but excluding the cost of pig lead : 150 mm diameter pipe | Each | 64.00 | 615.75 | 39,408 |
| 42 | DSR Item No 18.29 Supplying pig lead at site of work | Quintal | 1.50 | 28,116.2 | 42,174.3 |
| 43 | DSR Item No 18.30.2 Providing flanged point to double flanged CI/DI pipe and specials including testing of joints 100 mm dia | Each | 80.00 | 284.75 | 22,780 |
| 44 | DSR Item No 18.30.4 Providing flanged point to double flanged CI/DI pipe and specials including testing of joints 150 mm dia | Each | 80.00 | 343.55 | 27,484 |
| 45 | DSR Item No 18.31.1.2 Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 100 mm diameter Class II | Numbers | 40.00 | 4,500.25 | 1,80,010 |
| 46 | DSR Item No 18.31.3.2 Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 150 mm diameter Class II | Numbers | 82.00 | 6,661.8 | 5,46,267.6 |
| 47 | DSR Item No 18.31.4.2 Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 200 mm diameter Class II | Numbers | 14.00 | 13,512.6 | 1,89,176.4 |
| 48 | DSR Item No 18.40.3 Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality : 25 mm nominal bore | Metre | 80.00 | 15.25 | 1,220 |
| 49 | DSR Item No 18.40.5 Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality : 40 mm nominal bore | Metre | 64.00 | 20.95 | 1,340.8 |
| 50 | DSR Item No 18.40.6 Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality : 50 mm nominal bore | Metre | 96.00 | 25.25 | 2,424 |
| 51 | DSR Item No 18.40.8 Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality : 80 mm nominal bore | Metre | 80.00 | 36.4 | 2,912 |
| 52 | DSR Item No 18.41.3 Providing and filling sand of grading zone V or coarser grade, all round the G.I. pipes in external work : 25 mm nominal bore | Metre | 80.00 | 164.1 | 13,128 |
| 53 | DSR Item No 18.41.5 Providing and filling sand of grading zone V or coarser grade, allround the G.I. pipes in external work : 40 mm nominal bore | Metre | 64.00 | 170.5 | 10,912 |
| 54 | DSR Item No 18.41.6 Providing and filling sand of grading zone V or coarser grade, all round the G.I. pipes in external work : 50 mm nominal bore | Metre | 96.00 | 176.9 | 16,982.4 |
| 55 | DSR Item No 18.41.8 Providing and filling sand of grading zone V or coarser grade, allround the G.I. pipes in external work : 80 mm nominal bore | Metre | 80.00 | 287.7 | 23,016 |
| 56 | DSR Item No 18.46.3 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 25 mm nominal bore | Numbers | 32.00 | 369.35 | 11,819.2 |
| 57 | DSR Item No 18.46.5 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 40 mm nominal bore | Numbers | 24.00 | 523.2 | 12,556.8 |
| 58 | DSR Item No 18.46.6 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 50 mm nominal bore | Numbers | 16.00 | 706.7 | 11,307.2 |
| 59 | DSR Item No 18.46.8 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 80 mm nominal bore | Numbers | 12.00 | 1,061.25 | 12,735 |
| 60 | DSR Item No18.50.1 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore | Numbers | 16.00 | 715.05 | 11,440.8 |
| 61 | DSR Item No 18.52.1 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore | Numbers | 16.00 | 594.75 | 9,516 |
| 62 | DSR Item No 18.53.1 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore | Numbers | 16.00 | 500.35 | 8,005.6 |
| 63 | DSR Item No 18.54.1 Providing and fixing PTMT bib cock of approved quality and colour 15mm nominal bore, 86 mm long, weighing not less than 88 gms | Numbers | 24.00 | 109.85 | 2,636.4 |
| 64 | DSR Item No 18.55.1 Providing and fixing PTMT stop cock of approved quality and colour. 15 mm nominal bore, 86 mm long, weighing not less than 88 gms | Numbers | 24.00 | 103.15 | 2,475.6 |
| 65 | DSR Item No 18.59.3 Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately) : 100 mm dia | Numbers | 12.00 | 8,214.1 | 98,569.2 |
| 66 | DSR Item No 18.71.1 Providing and laying Double Flanged (screwed / welded) Centrifugally (Spun) Cast Iron, Class B (IS : 1536) : 100 mm dia C.I. Double Flanged Pipe | Metre | 1760.00 | 1,838.1 | 32,35,056 |
| 67 | DSR Item No 18.71.2 Providing and laying Double Flanged (screwed / welded) Centrifugally (Spun) Cast Iron, Class B (IS : 1536) : 150 mm dia C.I. Double Flanged Pipe | Metre | 3360.00 | 2,880 | 96,76,800 |
| 68 | DSR Item No 18.71.3 Providing and laying Double Flanged (screwed / welded) Centrifugally (Spun) Cast Iron, Class B (IS : 1536) : 200 mm dia C.I. Double Flanged Pipe | Metre | 280.00 | 4,535.1 | 12,69,828 |
| 69 | DSR Item No 19.1.1 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 100 mm diameter | Metre | 600.00 | 375.75 | 2,25,450 |
| 70 | DSR Item No 19.3.1 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design 100 mm diameter S.W. pipe | Metre | 200.00 | 425.6 | 85,120 |
| 71 | DSR Item No 19.5.1 Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps : 100 mm diameter | Metre | 150.00 | 73.35 | 11,002.5 |
| 72 | DSR Item No 19.5.2 Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps : 150 mm diameter | Metre | 150.00 | 81.1 | 12,165 |
| 73 | DSR Item No 19.6.2 Providing and laying non- pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 150 mm dia. R.C.C. pipe | Metre | 1240.00 | 493.1 | 6,11,444 |
| 74 | DSR Item No 19.6.3 Providing and laying non- pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 250 mm dia. R.C.C. pipe | Metre | 2237.00 | 811.15 | 18,14,542.55 |
| 75 | DSR Item No 19.21.1 Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : For pipes 100 to 250 mm diameter | Numbers | 380.00 | 683.7 | 2,59,806 |
| 76 | DSR Item No 19. 34. 1 Providing and fixing S.W. intercepting trap in manholes with stiff mixture of cement mortar 1:1 (1 cement: 1 fine sand) including testing of joints etc. complete: 10 mm dia | Numbers | 132.00 | 378.45 | 49,955.4 |
| 77 | DSR Item No 19.36.1 Providing and laying Non Pressure NP-4 class (Heavy duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement: 2 fine sand) including testing of joints etc. complete 450 mm dia RCC pipes. | Metre | 81.00 | 2,720 | 2,20,320 |
| Schedule total | ₹3,52,11,281.55 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Tenderpdf1.pdf
ATTACHMENT
tenderpdf2.pdf
ATTACHMENT
tenderpdf3.pdf
ATTACHMENT
SpecialCondition.pdf
ATTACHMENT
tenderpdf4-compressed.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .