Repairs to joinery, false ceiling and other misc maint works at Mountain Shadow under GE (AF) Borjhar

Amount

Taking down cement plaster on brick wall or stone wall including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.

M & L 5 mm thick rendering on ceilings in cement mortar 1:4 and finishing the surface even and smooth without using extra cement complete all as specified.

M&L for rendering 15mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces, finished fair and even without using extra cement complete all as specified and as directed.

&L for rendering 15mm thick on fair faces of brick work or concrete surface in cement mortar (1:4), mixed with WPC as per manufacturer's instruction and finished the surface even and smooth without using extra cement for sunken slab, etc. complete all as specified and as directed. Note : WPC shall be mesured and paid separetely here-in-after.

Supply only Integral waterproofing compound (ISI mark), best quality complete all as specified and as directed.

Taking down chowkats or frames including shutter (without taking off shutters from the frame), area n. exc. 1.5 Sqm each and removing from the site including cutting holes required for taking out existing hold fast, etc. complete all as specified and as directed

All as per Serial item 6 here-in-before but area exc. 1.50 Sqm but n. exc. 4 Sqm each.

Taking down shutters of any description n. exc. 1 sq.m each including iron mongery and removing from site complete all as specified and as directed.

All as per Serial item No. 8 here-in-before but exc. 1 sq.m and n. exc. 2 sq.m each

Re-fixing in same opening of serviceable shutter of any description not exceeding 1 sq.m each complete all as specified and as directed.

All as per Serial item No. 10 here-in-before but exc. 1 sq.m and n. exc. 2 sq.m each

M&L for 2nd class hard wood plain, solid, straight chowkats and frames, wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints and fixed complete all as specified and as directed.

Cutting holes in brick walls for inserting holdfasts and making good dismantled portion by filling cement mortar (1:3) or concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) exc half brick thick but n. exc. one brick complete all as specified and as directed.

S&F for MS work of flat iron of size 30mm x 6mm thickness as in hold fast, confirming to Fe-410-0 (Grade-E-250 Quality-A) complete all as specified and as directed.

S&F for 20mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both sides for cup board, etc. complete all as specified and as directed.

S&F 30mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete all as specified and as directed.

Supply and fixing, in repair, 20 mm dia curtain rails of anodized aluminum alloy with fixing brackets complete all as specified and directed.

Supply and fixing in repair 100 mm long Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F for 30mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); and fitted to chowkats complete all as specified and as directed.

S&F for 30mm thick second class hard wood glazed and skelton shutters for windows and ventilators, etc., open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8 clause 8.24 (a); complete all as specified and as directed.

S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, and edges will be painted to match will printed sheet fixed in opening as per specification and drawings complete all as spcified and as directed.

Supply and fixed Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and as directed.

Dismantling boarding, any description, fixed in any position with screws complete all as specified and as directed.

M&L for 12mm thick Plywood, grade BWP, type BB fixed with screws to timber frame work for kitchen cabinet complete all as specified and as directed.

M&L for 12mm thick Prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations, fixed with screws to timber frame work complete all as specified and as directed.

Repair to aluminium door shutter of any description incl taking down and refixing with necessary adjustment to door spring / door closer, aluminium / rubber beading, glass etc complete all as specified and as directed.

S&F in repairs rubber beading for aluminium glazed door complete al as specified and as directed.

Supply and fixing in repairs for aluminium anodised frame work as in partition wall, doors & window chowkhat with one or more rebates including joining beads, cleat setc,for fixing weight not less than 0.55Kg/Rm complete all as specified & as directed by Engineer-in-charge..

S&F in repairs for Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed.

S&F in repairs for Anodised aluminium window and ventilator shutters, sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos.) suitable handle (1 No.) complete all as specified and as directed.

S&F in repairs for 5.5mm thick sheet glass, ordinary quality and glazing with oil putty in square n. exc. 0.5 sq.m in each pane complete all as specified and as directed.

M & L in repairs for Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other plart made of mild steel heavy duty and fixed.

M&L in repairs for Anodized aluminium DECO grill, made of 6mm dia aluminium bars, size of mesh 50mm x 50mm, fixed with aluminium frame of size 50mm x 50mm x 1.9mm thick for aluminium window complete all as specified and as directed.

S & F in repairs for Aluminium Mortice lock vertical type size 75 mm 04 levers complete all as specified and as directed.

S&F as in repairs Door closer Aluminium (Die cast) body hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg complete all as specified and as directed.

S & F in repair for MS Helical door spring 300mm long tail pattern conforming to IS-452-1975complete all as specified and as directed.

S & F MS Helical door spring 300mm long tail pattern conforming to IS-452-1975complete all as specified and as directed.

S & F in repairs or in new floor door stopper of Aluminium alloy body and tongue, over all length of cover plate 150mm anodised with hard drawn steel spring, fixed to shutters complete all as specified and as directed.

S & F for door seal bottom made of aluminium body with nylon rubber bottom or bristles with not less than 94 cms in length for blocking of the entry of dust and crawling elements from under the door complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal or wooden frame including punching or drilling out old glazing pins/spring clips or fixed with putty or beads complete all as specified and as directed.

S&F for 3mm thick Sheet glass, ordinary quality and glazing with oil putty or with wooden beading are wooden frame or steel frame in square, area n. exc. 0.5 sq.m in each pane complete all as specified and as directed.

S&F for 3mm thick frosted sheet glass, ordinary quality and glazing with oil putty or with wooden beads in square, area n. exc. 0.5 sq.m in each pane complete all as specified and as directed.

S&F for Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

S&F as in repairs for Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed length of bolt 300 mm complete all as specified and as directed.

S&F in repairs of Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed length of bolt 300 mm complete all as specified and as directed.

S&F for butt hinges of size 100mm, extruded aluminium alloy with galvanised mild steel hinges pin, anodised and fixed, type C-21 complete all as specified and as directed.

S&F in repairs for butt hinges of size 100mm, extruded aluminium alloy with galvanised mild steel hinges pin, anodised and fixed, type C-21 complete all as specified and as directed.

S&F MS butt hinges of size 75mm long, medium weight, cold rolled complete all as specified and as directed.

S&F in repairs of MS butt hinges of size 75mm long, medium weight, cold rolled complete all as specified and as directed.

S&F for Aluminium handles of size 150mm, cast type, anodised complete all as specified and as directed.

S&F in repairs for Aluminium handles of size 150mm, cast type, anodised complete all as specified and as directed.

S&F for 125mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F in repairs for 125mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F for 200mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F in repairs for 200mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F for 150mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F in repairs for 150mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

M & L applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete.

Material and labour for preparation of new plastered surfaces of walls and applying two coat s of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed.

M&L three coats of white wash on newly plastered surfaces of walls including preparation of surface complete all as specified and as directed.

M&L three coats of white wash on newly plastered surfaces of ceilings including preparation of surface complete all as specified and as directed.

Material and labour for applying two coats of weather proof anti fungal exterior emulsion paint (smooth classic) over a coat of primer including preparing new plastered or unplastered surfaces of walls complete all as specified and as directed.

S&F mild steel framed work such as grills, gratings, etc. with ends of bars shoudered and/or riveted or forged in to spikes, framed guard bars, barred iron doors and similar works of Gde E-165 (Fe 290) including welding etc. complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description, area over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

Taking out old existing treatment of any thick and any position of RCC roof by scrapping, scrubbing, brooming down, etc. complete all as specified and as directed.

M&L for 40mm thick PCC (1:2:4) type B-1, using 20mm graded stone aggregate as in roof padding, surface finished even & fair without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick cement plaster with in cement sand mortar (1:4) mixed with WPC as per manufacturer instructions on other than fair faces of brick surface, finished even and fair without using extra cement over and including cement slurry @ 3 Kg per Sqm on existing roof surface complete all as specified and as directed.

M&L for preparation and cleaned to plastered/ concrete surfaces of roof and applying the under mentioned course of roof treatment as given below :- (a) Applying evenly compactible primer @ 0.4 litre per Sq.m over concrete/plastered roof surface (b) Applying a tack coat of industrial bitumen 85/25 grade (ISI marked) @ 1.2kg/Sqm (c) Laying of 3mm thick membrane sheet of weight not less than 3.6 kg/Sq.m with minimum longitudinal end over laps of 100mm and horizontal side laps of 75mm and joints finally thermo-fused with help of LPG flames. Membrane sheet laid over a tack of industrial bitumen 85/25 as specified here-in before. (d) Rest all as specified and as directed by Engineer-in-Charge at site.

Dismantiling of wall and ceiling boards (fiber, pulp, insulstion, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed

M&L for 4mm thick non asbestos fibre cement building designed boards, fixed or laid/ inserted to timber/GI/Aluminium framework with screws and fixed in celing flat or slope complete all as specified and as directed.

S&F of 605X605 mm anodised Aluminium snap grid frame work for false ceiling incl all required fixing accessories using necessary tools etc. complete all as specified and directed

Removing and re-fixing in same position of ceiling boards (fiber, pulp, insulstion, etc.) or insulation boards/slabs/blankets, any thickness after cleaning and dusting off the dirt using duster / cotton waste complete all as specified and directed.

Taking down rolling shutters of any description exc 2 sqm each and removing to store from site complete all as specified and as directed

S&F Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type with 1.25 mm thickness of laths complete all as specified and as directed.

S&F in repairs ball bearing for rolling shutters as per existing size & make complete all as specified and as directed.

S&F in repairs Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed.

S&F as in repairs stainless steel kitchen plate rack of overall minimum size 24" x 30" and 10" deep, with partitions for small/large plates, etc. made out of stainless steel 24 gauge, fixed with rawl plug and CP steel screws complete all as specified and as directed.

S&F as in repairs PVC cabinet mirror of size 350mmx500mmx100mm complete all as specified and as directed.

Dismantling water tanks exc. 250 litres and n.exc. 500 litres capacity and removal from site complete all as specified and as directed.

S&F for 500 litres capacity triple layered rotational moulded polyethylene water storage tank (cylindrical/vertical with closed top), hoisted and fixed in position complete all as specified and as directed

Dismantling water tanks exc. 500 litres and n. exc. 1000 litres and removal from site complete all as specified and as directed.

S&F for 1000 litres capacity triple layered rotational moulded polyethylene water storage tank (cylindrical/vertical with closed top), hoisted and fixed in position complete all as specified and as directed

Disconnecting existing tanks, setting aside (or lowering if required) for repairs of roof, cleaning etc and hoisting if required reconnecting and re-fixing in position capacity exc 250 ltrs and not exceeding 500 ltrs complete all as specified and as directed

Disconnecting existing tanks, setting aside (or lowering if required) for repairs of roof, cleaning etc and hoisting if required reconnecting and re-fixing in position capacity exc 500 ltrs and not exceeding 1000 ltrs complete all as specified and as directed

S&F as in repairs ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for 15mm dia iron pipe and fixed (minimum weight 142 gram) complete all as specified and as directed.

S&F as in repairs ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for 20mm dia iron pipe (minimum weight 210 gram) complete all as specified and as directed.

Taking up or down steel water tubing and connections including cleaning for re-fixing with all fittings of size 15mm bore complete all as specified and as directed.

Refixing of old steel tubing and connection in new/old position with all fittings to roof, wall or ceiling, or in floor etc. of size 15mm bore complete all as specified and as directed.

S&F 15mm dia bore galvanised mild steeel tubing, medium grade, with all fittings and fixed to wall or laid in floor complete all as specified and as directed.

Taking up or down steel water tubing and connections including cleaning for re-fixing with all fittings of size 20mm bore complete all as specified and as directed.

Refixing of old steel tubing and connection in new/old position with all fittings to roof, wall or ceiling, or in floor etc. of size 20mm bore complete all as specified and as directed.

S&F 20mm dia bore galvanised mild steeel tubing, medium grade, with all fittings and fixed to wall or laid in floor complete all as specified and as directed.

Easing of door/ window shutters/CB/Kitchen cabinet of any size/ any number of panels for easy closing/ opening, tightening of hinges or handles or changing the position of hinges or handles / knobs, hasp and stapple adjustments of tower bolts, sliding bolts, etc. including all necessary minor fittings and fixtures as required to smooth functioning complete all as specified and as directed.

Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for 75mm thick in cement concrete (1:3:6) type C-1 (using 20mm graded stone aggregate) as in plinth protection, footpath, etc. complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate in platform over roof for PVC tanks finished even and smooth without using extra cement all as specified and as directed

S & F in repair Vitreous China wash down water closet pan (pedestal pattern) white with ‘P’ or ‘S” trap, plastic seat cover white including connection to outgoing pipe & to flushing pipe, anti-syphonage pipe etc as in repairs (excuding flushing cistern and flush pipe) complete

M&L for vitreous china squatting pan "Orissa" pattern of size 580mm x 440mm, white with 'P' or 'S' trap, front or back inlet and with integral foot rest including provision of concrete bedding in PCC (1:5:10) type E-2 (using 40mm graded stone aggregate), jointing traps, etc. with "RBR-modified mortar" including priming of joints using "RBR-Cement" slurry including dismantling old existing one and fixed in same position complete all as specified and as directed.

S&F as in repairs 10 litres capacity PVC valveless symphonic action type low level flushing cistern including 32mm dia PVC flush pipe connected to WC with inlet, ball valve, float and handle lever and fixing on walls with bracket including 15mm pvc connection pipe complete all as specified and as directed.

Repairing of leakage of water supply system i.e., for 15 mm / 20 mm inlet/outlet pipe in any location any position or removal of air lock/blockage of water in GI tubing 15mm / 20mm bore and cleaning the pipe or fittings, etc. and re-fixing the same in same position or petty repairs to leaking water in bib taps, pillar taps, stop cock, angle valves, etc. of any description by changing the washers, etc complete all as specified and as directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing the rubbish off the premises complete

M&L for cement concrete tiles of size 20cm x 20cm x 20mm thick, machine pressed, set, jointed and pointed in neat cement siurry in floor with white cement and pigment to match over and including 15mm thick screed bed or bedding layer of CM (1:6) complete all as specified and as as directed.

Demolition of brick work built in cement or cement lime mortar complete all as specified and as directed.

S&F as in repairs bevelled edge looking mirror of size 600mm x 450mm x 4mm thick, mounted on 3mm thick PVC frame and fixed to wooden plugs with CP screws and washers complete all as specified and as directed .

M&L non skid ceramic coloured tiles 7 to 8mm thick (Square/rectangular), area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, as in floors, etc. over and including 15mm thick screed bed or bedding layer set in cement mortar (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and as directed.

M&L for non skid ceramic designer coloured tiles 7 to 8mm thick (square/rectangular), area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

M&L for glazed ceramic tiles (coloured) of size 350mm x 250mm x 7mm/ 450mm x 350mm x 7mm thick on vertical surfaces, such as dado, skirting, etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick rendering (as screed bed) in cement mortar (1:4) complete all as specified and as directed.

M&L for Vitrified Ceramic tiles, light shade/ dark shade/Double Charged/Ultra charged, 10mm thick (square or rectangular) polished, area of each tiles not exc. 0.36 sqm, laid as in floors, etc. set and jointed with cement slurry over and including 15mm thick bedding of layer of cement mortar (1:6) and pointed with coloured cement to match with surfaces of tiles complete all as specified and as as directed.

all as per serial item No 106 here-in-before but as in skirting/dado laid over and including 15mm thick rendering (as screed bed) in cement mortar (1:4)

Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 75mm thick PCC (1:3:6) type C-2, (using 40mm graded stone aggregate) as in hardstanding, etc. finished the surface even and fair without using extra cement complete all as specified and as directed.

M&L for 25mm thick in cement concrete (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in sub base, etc. complete all as specified and as directed.

S&F as in repairs 50mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints / solvent cement joints fixed to walls complete all as specified and as directed.

S&F as in repairs 50mm bore PVC (SWR) bends, any radius complete all as specified and as directed.

M&L for brick work with sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed.

Baruah Fabrication

M/S RUPDEEP ENTERPRISES

M/S PRASANTA MAHANTA