Construction of Office Building for Mirza Electrical Division and Mirza Electrical Sub-Division of APDCL, at Mirza, Kamrup_R

Items :

Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. I) By Manual Means A) Up to a depth of 2.00 m below the existing ground level. a) In ordinary soil

Earth/sand filling in plinth in layers not more than 150 mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. (c) With river sand or silt (predominantly non- plastic) by truck carriage including loading and unloading.

Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a) Brick on flat soling

PLAIN CEMENT CONCRETE WORKS-Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). (a) In prop 1 cement: 3 sand : 6 coarse aggregate by volume

REINFORCEMENT-Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained). Super Ductile TMT reinforcement bar (Fe 500D) A) Up to G+2 RCC Buildings ii)JSPL (Panther), Electrosteel (V-xega), Shyam Steel TMT Bar

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0 M and removal of the same for in-situ reinforced concrete and plain concrete work in: 3.1.1.1) Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc. i) Using 38 mm thick plank

Sides of tie beams, grade beams etc. at or below ground level. i) Using 38 mm thick plank

Columns, Pillars, Posts & Strut a) Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having plane vertical face i) Using 38 mm thick plank

Flat Surfaces such as soffits of suspended floors, roofs, edges of slab, landings, cantilever slabs, chajjas, balconies and the like. a) Floors etc. upto 200mm in thickness. i) Using 38 mm thick plank

Sloping or Battering sufaces such as sloped slabs etc. including folded plates. (a) Where inclination to horizontal plane does not exceed 30 degrees requiring shuttering only on the underside. Using 38 mm thick plank

REINFORCED CEMENT CONCRETE WORKS-Providing and laying plain/reinforced cement concrete works cement, coarse sand & 20 mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately). (I) Using Mixer Machine (A) In substructure up to plinth level Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. (N) Without using admixture, plasticiser (b) M20 grade concrete or Prop. 1:1.5:3

(B) In super structure from plinth level up to 1st floor level. ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing. N) Without using admixture, plasticiser (b) M20 grade concrete or Prop. 1:1.5:3

1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately). (A) 112 mm thick brick wall (a) In cement mortar in proportion 1:4. (1 cement:4 sand)

Providing wood work in frame (chowkaths) of doors, windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40mmx 3mmx 250mm) as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified. (b) With 1st class timber (Bonsum/ Sundi)

Providing, fitting and fixing full panelled doors/ windows including oxidised M.S butt hinges (100 mm x 75 mm x 3.55 mm) with necessary screws (other fittings to be measured and paid separately ) I) With Teak wood / Sissu wood. (b) 35 mm thick

Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished ) a) Sliding door bolts ii) 250 mm x 16 mm

b) Tower bolts i) 300 mm x 12 mm

c) Door handles iii) 150 mm

Varnishing two coats (excluding priming coat) on new wood and wood based surfaces under coating with flatting varnish and finishing coat with copal varnish or spar varnish to give an even surface including cleaning the surface of all dirt, dust and filling the knots,crack etc with specially made wood putty and sand papering so as to produce a smooth, dry and matt surface. a) Surfaces over 100 mm in width or girth.

Polishing with french sprit polishing on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust sand papered smooth and including a coat of wood filter.

Applying two coats of wood preservative oil (colourless) of approved make on new wood and wood based surfaces, after including preparing the surface by throughly cleaning oil,grease,dirt and other foreign matter, sand papering and knotting.

Providing, fitting and fixing standard aluminium sliding windows and ventilators of standard sections ( with minimum thickness 1.9 mm ) of approved brands without horizontal glazing bars joints mitred and jointed with SS screws (manufactured to IS: 733 and IS: 1285 specifications) and providing and fixing handles, angle cleat, EPDM rubber gasket, roller, bolting device, locking arrangements, screws etc as required complete as specified and directed for all levels. (Glazing to be measured and paid separately ) (a) 2 Track sliding window i) Normal Anodised Aluminium

Providing, fitting and fixing Glazing and Pre laminated board of specified thickness for Aluminium and UPVC works on windows, doors, partition walls, curtain wall etc. as specified and directed by the department at all levels. Clear Glass-6.00 mm thick

Frosted Glass- 5 mm thick

Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ opening with M.S. flats at required spacing in frame all round, squre or round M.S. bars with round headed bolts, nuts or screws. Ornamental grill c) Fixed to steel frames (@ 15 kg/sqm)

Providing, fitting and fixing aluminium hollow section of size 63.50 mm x 38.10 mm x 2.5 mm thick for aluminium frame partition wall of approved brands, with frames of a maximum spacing of frame 1.20 m joints mitred and jointed with SS screws (manufactured to relevant I.S. specification) and providing and fitting angle cleat, rubber gasket, bolting device screws etc. at all levels. i) In Normal Anodised Aluminium Section

(M) PARKING TILES / OUTDOOR TILES Providing, and fixing parking/outdoor tiles of approved brand as per the guidelines of manufactures and as specified & directed by the Department . (a) 200 mm x 100 mm ii) 15 mm thick

CERAMIC TILES A) AT FLOOR Providing Ceramic Tiles of approved quality, size, shape and thickness not less than 8 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with fix-A Tile Choksey/ Sika/ Pedelite/Rouf/ White cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed (coloured pigment should be in conformity with colour of slab and as approved and directed by the Department) c) 600 mm x 600 mm and above

VITRIFIED TILES II) ON FLOOR Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18 mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (A) NORMAL RANGE (c) 495 mm x 495 mm

(I) CERAMIC TILES B) WALL TILES Providing ceramic wall tiles of approved quality, size, shape and thickness not less than 8 mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (A) Normal range e) 300 mm x 300 mm

VITRIFIED TILES (I) ON WALL Providing polished vitrified wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). d) 300 mm x 600 mm

15 mm thick Cement plaster in single coat on brick / AAC / concrete walls for plastering for both fair or rough side up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. a) In cement mortar 1:3

Providing two coats of 1.5 mm thick acrylic water based wall putty / wall filler of Asian Paints/ Berger/ Dulux/ Flixo Paints/ Aria Paints/ over concrete/ cement plaster/ brick walls and ceilings both internal and external after removing all the loosely adhering material from the wall/ceiling surface with the help of emery stone, putty blade or wire brush, moistening the wall with the help of sufficient quantity of clear water as specified and directed by the department.

Wall painting (two coats) with Plastic emulsion paint of approved brand and manufacture on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth

Extra over item no 1.34 above for painting on celling and on sloping roof.

Finishing old / new wall with water proofing weather coat smooth anti-fungal exterior painting of approved make of paint of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats)

Painting two coats (excluding priming coat) on new steel and other metal surface with alluminium paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) and brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. (a) Surfaces over 100mm in width or girth

Providing plinth protection with bricks flat laid in cement mortar 1: 4 and finished with 15mm thick cement plaster in prop. 1:2 with a floating coat of neat cement finish.

Plain cement concrete floor base in prop 1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete. c) 100 mm thick

Providing polished tiles of approved quality, size, shape of specified thickness on pavers over a base of 100mm compacted sand gravel including cutting where necessary finished with flush pointing with Fix- A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls). (A) SUNROCK-Hi CTS/ MULTIWYN or equivalent (a) 60 mm thick

Providing fitting and fixing vitreous water closet squatting pan (Indian type W.C Orissa pattern) with all fittings and fixtures complete including cutting and making good to the walls and floors whereever required. (Flushing Cistern to be paid separately) Indian type W.C Orissa pattern of size 580 x 440 mm a) White i) Parryware make (Cat No.C0117)

Providing fitting and fixing vitreous china squatting plate urinal with automatic flushing cistern with standard flush pipe and CP brass spreader andbrass unions, etc. complete including painting of fittings and brackets, cutting and making good the walls & floors wherever required. (i) White (Cat. No. C0503)

Providing fitting and fixing vitreous china pedestal type water closet (European type W.C pan 400mm high ) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately) A) Parryware make a) White Elite S/P Trap (Cat No.C0297/C0278) (inclusive of seat cover)

Supplying, fiting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately) A) Parryware make a) White (ii) Economy Dual Flush (Cat No.E8109/8057)

Providing fitting and fixing vitreous china flat back type lipped front urinal basin with standard flush pipe and CP brass spreader andbrass unions, etc. complete including painting of fittings and brackets, cutting and making good the walls & floors wherever required. A) Parryware make a) White (iv) Aquaseal N C0578/C1801

Supplying fiting and fixing vitreous china division plate including fitting and fixing compete as directed and specified. A) Parryware make a) White (i) Partition Plate (Cat. No.C0507 Large) (130 x 330 x 675mm)

Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately) (A) Parryware Make (a) White (i) Cascade NXT 550 x 440 with long Pedestal (Cat. No.C0404/C0380)

Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing with clamps etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches.

Providing fiting & fixing C.I. Grating to the floors complete as directed and specified. (a) 110mm dia

Construction of inspection pit inside measurement 450mm x450mm x450mm flush with 100mm diameter HCI/PVC pipes and cement concrete base in proportion 1:3:6 over flat brick soling, 12cm brick wall in cement mortar in proportion 1:4 finished with 13mm cement plaster in proportion 1:2 in side wall and floor. 450mm x450mm air tight C.I. inspection pit cover and frame complete including supplying of materials, necessary excavation of pit as directed.

Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately) i) Essco make (Delux/Sumthing spl./Tropical) (a) 110mm dia(i) 15mm dia Bib Cock-item code: DLX-ESS-511

Supplying fitting and fixing stop-cock of approved brandof size as mentioned below and directed and specified (G.I. & C.P. pipes will be measured and paid separately) i)Brass stop cock (heavy) of Sant make (i) 15mm dia

Supplying and fitting fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed. VI. JANATA Collection (i) Pillar cock, Cat No.JT-5001

Supplying and fitting gun metal country pit valve (full way valve) I.S.I. Make as specified and directed. a) 50mm dia

Supplying and fitting ball valve as specified and directed.. a) 25 mm dia. (gun metal) (i) Pillar cock, Cat No.JT-5001

Providing, fitting and fixing CP soap tray / soap dish complete as directed and specified. Soap dish light

Providing, fitting and fixing Chrome Plated waste coupling complete as directed and specified. (b) Sona (i) Rupa 32mm (HT/ FT) (Cat.No.WS-0801)

Providing fitting and fixing Mirror with plastic frame of size 500x400mm complete as directed and specified. (i) Rupa 32mm (HT/ FT) (Cat.No.WS-0801)

Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes 1000 litre capacity (a) Sintex make

Labour for erecting and placing the G.I. Tank over the stagging of a height above 5.00m up to 8.00metre complete as directed. (b) 1000 liter capacity

Labour for sinking tube well with 40mm (internal) dia G.I. Pipes up to having strata, having potable water including fitting and fixing strainer hand pump and other accessories as directed complete as in any soil.

Labour for test boring with 40mm (internal) dia G.I. Pipes including keeping surplus of earth and every 2.00m after first 3.00m depth and delivering the same in nearest P.W.D. camp in the small tin container (container, scaffolding, tools etc. will have to be arranged by the contractor at his own cost). i) Bore hole of 75mm diameter G.I. pipe a) TATA / SAIL (Medium) socket should be welded tothe pipes. ii) 65mm diameter

Labour for boring hole for inserting tube well pipes through different soil/ rock media including hire charges of drill pipes, scaffolding, tools and plants as necessary and taking out the same and lowering pipes, fittings complete as directed by the Department. i) Bore hole of 75mm diameter

Supplying, fitting and fixing pipes plain/bevel ended for casing, conforming to relevant IS codes of practie ncluding supplying and fitting of tube well accessories, lowering of assembly pipes concentrically in the borehole followed by supplying and packing of pea gravel free from dirt, dust and other foreign materials in the annular space between the borehole and assembly pipes complete as directed by the Department. G.I. pipe a) TATA / SAIL (Medium) socket should be welded tothe pipes. ii) 65mm diameter

Development of the tube well with compressor or by over pumping unit for 48 hours till sand free discharge is obtained

Brick work in cement morter with 1st class brick including raking out joints and curing complete as directed. A) In Sub-structure upto plinth level including dewatering if necessary i) In proportion 1:3 (1 cement:3 sand)

Plain cement concrete floor base in prop1:3:6 laid in alternate bays as specified with coarse agg. of size 13 mm to 32 mm including dewatering if necessary, and curing etc. complete. b) 50 mm thick

Plain cement concrete works with coarse aggregate of sizes 13 mm to 32 mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). i) In prop 1 cement: 3 sand : 6 coarse aggregate by volume

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: Columns, Pillars, Posts & Strut a) Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having plane vertical face i) Using 38 mm thick plank

Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete upto 1st floor level Note :- lap length for reinforecement bars (25mm or above) will be measured and paid separately. III) Other ISI approved TMT reinforcement bar of Fe-500 N/mm2 (For Assam Type Bldg., drain works, boundary wall etc).

15 mm thick Cement plaster in single coat on brick AAC / concrete walls for plastering for both fair or rough side up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (iii) 0.50 mm Total Painted Thickness (TPT)

Providing PPGI accessories (Ridges / Valley / Gutter / Flashing) at all levels including fitting and fixing self drilling, self tapping screws complete (iii) 0.50 mm Total Painted Thickness (TPT)

Providing fitting, hoisting and fixing of roof trusses fabricated out of Rectangular Hollow Section (RHS) & Square Hollow Section (SHS) including purlins, bottom runners and providing M.S. cleat, M.S. angle base plank, bolts and nuts with red oxide primer including fitting bottom runner and cleat etc. for fixing ceiling joist as per design complete as directed as per specifications. a) Using TATA make RHS/SHS of Grade 310 conforming to relevant I.S. code 4923 : 1997

M/S Assam Electric Store

M/s Habibar Rahman

HABI INFRASTRUCTURE

M/S U.K. ENTERPRISE

Shiv Construction