10 - SITC Dynamic RGBW Facade Lighting and Beautification Works at Shree Sawariya Ji Mandir Mandal Mandafiya. Dist.- Chittorgarh.

SITC of LED Linear fixture RGBW (DMX512 Compatible)4 in 1 , 4 pixel,IP67, IK 07. The housing should be made of high strength pressure die cast aluminium and coated by static powder making it weather resistant. The fixture should have toughned saftety glass having 3-4 mm thickness fixed with glue less technology . Voltage input DC 24V . The luminaire should have options for various beam angle: 10°/25°/40°/60°. Light fixture should be standard DMX512 protocol compatible, the DMX decoder function should be inbuilt the light fixture. Estimated LED Lifetime is L70-50,000 hours minimum@ 25degree Ambient Temperature and LEDs of CREE / OSRAM / NICHIA to be used. Lumens will be measured in white clour light with all 4 channels on condition . Operating Temperature : -10°C to +50°C. Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements. Test & Certificates- BIS, LM79, LM80, IEC Safety test reports. Complete as Required.

36 WATT LINEAR RGBW (1 MTR LENGTH) (1440 lumen)

24 WATT LINEAR RGBW (1 MTR LENGTH) (960 lumen)

SITC of LED Profile fixture 15W per mtr ,IP66, Lumen Efficacy should be 1125 Lumens per mtr. The Lumens will be measured in white colour. The Mounting housing should be of aluminium and coated by static powder making it weather resistant. Voltage input DC 24V . Estimated LED Lifetime is L70-50,000 hours minimum@ 25degree Ambient Temperature and LEDs of CREE / OSRAM / NICHIA to be used. The fixture should be flexible.the base made of -aluminum-should be properly attached with stone cladding . including all necessay accessaries which is required Complete as Required.

15W WATT PROFILE 1000 MM (1125 lumens)

SITC of LED flood light fixture , RGBW (DMX512 Compatible), 4 in 1 , 4 pixel IP 67,IK07. The housing should be made of high strength pressure die cast aluminium thick with and coated by static powder making it weather resistant. The fixture should have toughned saftety glass having 3-4 mm thickness fixed with glue less technology . Voltage input AC240V . The luminaire should have options for various beam angle: 10°/25°/40°/60°. Light fixture should be standard DMX512 protocol compatible, the DMX decoder function should be inbuilt the light fixture. Estimated LED Lifetime is L70-50,000 hours minimum@ 25degree Ambient Temperature and LEDs of CREE / OSRAM / NICHIA to be used. Lumens will be measured in white clour light with all 4 channels on condition Operating Temperature : - 10°C to +50°C. Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements. Test & Certificates- BIS, LM79, LM80, IEC Safety test reports.including with all fixing accessories ,complete as required

56 WATT RGBW FLOOD LIGHT WITH LOWER BEAM (2240 lumen) Complete as required

30 WATT FLOOD LIGHT RGBW (1200 lumen)Complete as Required

320 WATT RGBW FLOOD LIGHT (12800 lumen)Complete as Required

24 WATT FLOOD LIGHT (960 lumen)

Supply, installation, Testing & Commissioning of heritage architectural decorative Four Arm brackets with suspended aluminum light fixture. Installation of same with stainless steel anchor bolts of suitable size to grout it into specially designed Bansi Phahdpur Stone Pre cast foundation with suitable ring type arranagement which can take the arms weight, as shown in the enclosed drawing. The decorative Bracket shall be fixed on the top of the Stone Pillar. The decorative bracket with light fixture should be of reputed brand. The details of Bracket & light are given below: - A. Bracket: The ornamental BANSURI with “MAYUR PANKH” design arched custom- made tubular combo brackets details of the various portions are given in the drawing, which is of nearly 1000mm width, 620mm height & which is made in combination of heavy-duty mild steel hollow pipe section nearly 42mm dia aesthetically look like bansuri with ornamental Mayur Pankh straight armed with cast iron elements. A cast aluminum decorative religious “SUDARSHANA CHAKRA” with hand design provided on top of the bracket for Aesthetics which is of nearly 208mm width, 400mm height. The designs of cast iron to be welded to the brackets shall be similar to the once shown in the drawing. Mentioned dimensions are proposed dimensions, which may vary with actual measurements (Tolerance of ±5%). B. Light Fixture The ornamental aluminum casted decorative light fitting of total height nearly 550mm & width of 480mm. The fixture having suitable Adopter/connector for fixing on required post; as shown in the enclosed drawing/picture. The fixtures have casted part ring & spinning part which are well assembled design for better look. It shall have designed to illuminate large areas with its wide Dispersion without affecting the environment. It shall have extra clear transparent polycarbonate doom half round doom - shaped light cover with stainless-steel fastening elements. The fixture having provision to fix complete with required power supply. The designs of cast aluminum light fixture shall be similar to the once shown in the drawing. The fixture having provision to fix complete with required power supply; The luminaries must have rated with IES LM-79-08(As per IEC62262:2002).The main structural components of fixtures have IP67, UV resistant & shock resistance

IK08 (As per IEC62262:2002) with tilting frame for access to the electric & optical auxiliary compartment with silicon gaskets fixing. As regarding the electrical auxiliaries for LED module of 90watt with IP protected polycarbonate Lens & input frequency of 50Hz ; Estimated LED Lifetime is L70-50,000 hours minimum@25degree Ambient Temperature THD <10% with inbuilt surge protection of 5KV AC of & High Grade Heat sink in extruded aluminum with Silicon Compound Used for PCB Heat transferor. Each LED with specific lens for uniform photometric distribution. The LED driver shall be Water proof, With Aluminum casing covering with silicon potting with efficacy <85%.The LED efficiency of 100 Lumen/watt and LEDs of CREE / OSRAM / NICHIA to be used; Operating Temperature : - 20°C to +50°C. Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements. it has support plates for LED module & wiring easily removable. It has appropriate space for auxiliary devices for plate wiring. It is responsibility of the installer the correct installation & electric connection in accordance with applicable regulation. Mentioned dimensions are proposed dimensions, which may vary with actual measurements (Tolerance of ±5%). Test & Certificates- BIS, LM79, LM80, IEC Safety test reports. C. Finish: Color specification & finishing process must follow as per the ISI standard. All parts must be clean by SHOT blasting process. Further parts are painted in 4 layer coating(Coating thickness-125 to 150 micron) in which first layer with epoxy primer(to prevent corrosion),second layer with epoxy base colour,than third layer polyurethane (PU) metallic paint (Gold/Green/Copper/Silver) & final layer of polyurethane (PU) lacquer (to prevent ultra violets ray). D. Material Specification: All this above parts made of cast iron castings must be of FG-150 grade as per IS 210 (2009) standard, Hardness must be in range between 130 BHN to180 BHN. Cast iron must have Chemical composition of Carbon -3.0% to 4.0% Silicon- 1.0% to 2.0%, magnesium -0.5% to 0.7%,sulpher -0.02% to 0.04% & phosphorous-0.07% to 0.09% this composition is best suitable for product strength & life. All completed as approved by Engineer-in -charge.

90 WATT DECORATIVE LIGHT (WARM WHITE)

Supply, installation, Testing & Commissioning of heritage architectural decorative Double Arm brackets with suspended aluminum light fixture. Installation of same with stainless steel anchor bolts of suitable size to grout it into specially designed Bansi Phahdpur Stone Pre cast foundation with suitable ring type arranagement which can take the arms weight, as shown in the enclosed drawing. The decorative Bracket shall be fixed on the top of the Stone Pillar. The decorative bracket with light fixture should be of reputed brand. The details of Bracket & light are given below: - A. Bracket: The ornamental BANSURI with “MAYUR PANKH” design arched custom- made tubular combo brackets details of the various portions are given in the drawing, which is of nearly 1000mm width, 620mm height & which is made in combination of heavy-duty mild steel hollow pipe section nearly 42mm dia aesthetically look like bansuri with ornamental Mayur Pankh straight armed with cast iron elements. A cast aluminum decorative religious “SUDARSHANA CHAKRA” with hand design provided on top of the bracket for Aesthetics which is of nearly 208mm width, 400mm height. The designs of cast iron to be welded to the brackets shall be similar to the once shown in the drawing. Mentioned dimensions are proposed dimensions, which may vary with actual measurements (Tolerance of ±5%). B. Light Fixture The ornamental aluminum casted decorative light fitting of total height nearly 550mm & width of 480mm. The fixture having suitable Adopter/connector for fixing on required post; as shown in the enclosed drawing/picture. The fixtures have casted part ring & spinning part which are well assembled design for better look. It shall have designed to illuminate large areas with its wide Dispersion without affecting the environment. It shall have extra clear transparent polycarbonate doom half round doom - shaped light cover with stainless-steel fastening elements. The fixture having provision to fix complete with required power supply. The designs of cast aluminum light fixture shall be similar to the once shown in the drawing. The fixture having provision to fix complete with required power supply; The luminaries must have rated with IES LM-79-08(As per IEC62262:2002).The main structural components of fixtures have IP67, UV resistant & shock resistance IK08

(As perIEC62262:2002) with tilting frame for access to the electric & optical auxiliary compartment with silicon gaskets fixing. As regarding the electrical auxiliaries for LED module of 90watt with IP protected polycarbonate Lens & input frequency of 50Hz ; Estimated LED Lifetime is L70-50,000 hours minimum@25degree Ambient Temperature THD <10% with inbuilt surge protection of 5KV AC of & High Grade Heat sink in extruded aluminum with Silicon Compound Used for PCB Heat transferor. Each LED with specific lens for uniform photometric distribution. The LED driver shall be Water proof, With Aluminum casing covering with silicon potting with efficacy <85%.The LED efficiency of 100 Lumen/watt and LEDs of CREE / OSRAM / NICHIA to be used; Operating Temperature : - 20°C to +50°C. Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements. it has support plates for LED module & wiring easily removable. It has appropriate space for auxiliary devices for plate wiring. It is responsibility of the installer the correct installation & electric connection in accordance with applicable regulation. Mentioned dimensions are proposed dimensions, which may vary with actual measurements (Tolerance of ±5%). Test & Certificates- BIS, LM79, LM80, IEC Safety test reports. C. Finish: Color specification & finishing process must follow as per the ISI standard. All parts must be clean by SHOT blasting process. Further parts are painted in 4 layer coating(Coating thickness-125 to 150 micron) in which first layer with epoxy primer(to prevent corrosion),second layer with epoxy base colour,than third layer polyurethane (PU) metallic paint (Gold/Green/Copper/Silver) & final layer of polyurethane (PU) lacquer (to prevent ultra violets ray). D. Material Specification: All this above parts made of cast iron castings must be of FG-150 grade as per IS 210 (2009) standard, Hardness must be in range between 130 BHN to180 BHN. Cast iron must have Chemical composition of Carbon -3.0% to 4.0% Silicon- 1.0% to 2.0%, magnesium -0.5% to 0.7%,sulpher -0.02% to 0.04% & phosphorous-0.07% to 0.09% this composition is best suitable for product strength & life. All completed as approved by Engineer-in -charge.

45 WATT DECORATIVE LIGHT (WARM WHITE)

Supply, of decorative pole having provision to fix specially design custom made decorative LOTUS Flower shaped Eight arm bracket with aluminum light fixture. Installation of same with foundation bolts of suitable size to grout it into specially designed RCC foundation, as shown in the enclosed 3D image. The decorative Lotus bracket & light shall be fixed on the top of the pole. The details of pole, brackets & light are given below: -

The Pole: The pole shall look like as shown in the 3D Image (DDP-004-LTS). It shall have all similar features as shown in the enclosed drawing. The Combo Pole of nearly 7200 mm length. The pole has ornamental base (Approx. overall dimension-height 1230mm, bottom dia 1210mm) shall have a provision of inbuilt junction box for fixing MCB’s or cutouts with detachable window cover. On above ground level having high mast Tapered pole of 6050mm length with bottom OD 520 mm & top OD 286 mm. decorative cast iron base & having heavy duty mild steel base plate of required size (IS 2062 Grade). Mentioned dimensions are proposed dimensions, which may vary with actual measurements (Tolerance of ±5%).

Brackets: The ornamental “National Flower Emblem” design Lotus custom-made bracket with provision of light fixture, details of the various portions are given in the drawing, which is of nearly 3500mm width, 1800mm height & which is made in Aluminum section with cast aluminum elements. The designs of Cast aluminum to be welded to the brackets shall be similar to the once shown in the drawing. Mentioned dimensions are proposed dimensions, which may vary with actual measurements (Tolerance of ±5%).

Light Fixture: The specially design in traditional touch ornamental decorative suspended/hanging type light fittings of total height nearly 500mm & 670mm width, having suitable Adopter/connector for fixing on required post; as shown in the enclosed drawing/picture. The fixtures have aluminum casted parts welded with decorative cast aluminum designs for better look. It shall have designed to illuminate large areas with its wide dispersion without affecting the environment. It shall have extra cleared transparent polycarbonate doom half round-shaped light cover with stainless-steel fastening elements. The fixture having provision to fix complete with required power supply. As regarding the electrical auxiliaries for LED module of 180 watt with IP protected polycarbonate Lens & input frequency of 50Hz ;THDEstimated LED Lifetime is L70-50,000 hours minimum@25degree Ambient Temperature THD <10% with inbuilt surge protection of 5KV AC of & High Grade Heat sink in extruded aluminum with Silicon Compound Used for PCB Heat transferor. Each LED with specific lens for uniform photometric distribution. The LED driver shall be Water proof, With Aluminum casing covering with silicon potting with efficacy <85%.The LED efficiency of 110 Lumen/watt and LEDs of CREE / OSRAM / NICHIA to be used; Operating Temperature : - 20°C to +50°C. Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements. it has support plates for LED module & wiring easily removable. It has appropriate space for auxiliary devices for plate wiring. It is responsibility of the installer the correct installation & electric connection in accordance with applicable regulation. Mentioned dimensions are proposed dimensions, which may vary with actual measurements (Tolerance of ±5%). Test & Certificates- BIS, LM79, LM80, IEC Safety test reports.

Finish: Color specification & finishing process must follow as per the ISI standard. All parts must be clean by SHOT blasting process. Further parts are painted in 4 layer coating(Coating thickness 125 to 150 micron) in which first layer with epoxy primer(to prevent corrosion),second layer with epoxy base colour,than third layer polyurethane (PU) metallic paint (Gold/Green/Copper/Silver) & final layer of polyurethane (PU) lacquer (to prevent ultra violets ray). Material Specification (Cast Iron): All this above parts made of cast iron castings must be of FG 150 grade as per IS 210 (2009) standard, Hardness must be in range between 130 BHN to180 BHN. Cast iron must have Chemical composition of Carbon -3.2% to 3.8% Silicon- 1.0% to 2.0%, magnesium -0.5% to 0.7%,sulpher -0.02% to 0.04% & phosphorous-0.07% to 0.09% this composition is best suitable for product strength & life. Material Specification (Aluminum): All Bracket parts in cast aluminium castings must be made of Commercial grade/equivalent to LM6 grade materials; best suitable for this type of outdoor material. The overall wall thickness must be 10 to 12 mm; this composition is best suitable for product strength & life.All completed as approved by Engineer-in -charge.

Supply, of decorative High Mast pole having provision to fix specially design custom made decorative Single arm bracket with aluminum light fixture. Installation of same with foundation bolts of suitable size to grout it into specially designed RCC foundation, as shown in the enclosed drawing. The decorative bracket & light shall be fixed on the top of the pole. The details of pole, brackets & light are given below: - The pole: with brackets shall look like as shown in the drawing. It shall have all similar features as shown in the enclosed drawing/picture. The Cast Iron Pole of nearly 3000mm length. The pole has ornamental base (Approx.overall dimension-height 1000mm,bottom dia 1100mm) shall have a provision of inbuilt junction box for fixing MCB’s or cutouts. The part above ornamental base design consists of decorative floral design Bamboo with circular shapes & rings in different dimension, is made of cast iron in fine finish. The design of the cast-iron parts is clearly shown in the drawing. Mentioned dimensions are proposed dimensions, which may vary with actual measurements (Tolerance of ±5%).

Bracket: The ornamental BANSURI with “MAYUR PANKH” design straight arm custom-made tubular combo brackets details of the various portions are given in the drawing, which is of nearly 1600mm width, 688mm height & which is made in combination of CI+MS aesthetically look like bansuri with ornamental Mayur Pankh straight armed with cast iron elements. Mentioned dimensions are proposed dimensions, which may vary with actual measurements (Tolerance of ±5%).

Light Fixture: The ornamental aluminum casted decorative light fitting of total height nearly 300mm & width of 500mm. The fixture having suitable Adopter/connector for fixing on required post; as shown in the enclosed drawing/picture. The fixtures have casted part ring & spinning part which are well assembled design for better look. It shall have designed to illuminate large areas with its wide Dispersion without affecting the environment. It shall have extra clear transparent polycarbonat light cover with stainless-steel fastening elements. The fixture having provision to fix complete with required power supply. The designs of cast aluminum light fixture shall be similar to the once shown in the drawing. The fixture having provision to fix complete with required power supply; As regarding the electrical auxiliaries for LED module of 45 watt with IP protected polycarbonate Lens & input frequency of 50Hz ;THD The fixture having provision to fix complete with required power supply. As regarding the electrical auxiliaries for LED module of 180 watt with IP protected polycarbonate Lens & input frequency of 50Hz ;THDEstimated LED Lifetime is L70-50,000 hours minimum@25degree Ambient Temperature THD <10% with inbuilt surge protection of 5KV AC of & High Grade Heat sink in extruded aluminum with Silicon Compound Used for PCB Heat transferor. Each LED with specific lens for uniform photometric distribution. The LED driver shall be Water proof, With Aluminum casing covering with silicon potting with efficacy <85%.The LED efficiency of 100 Lumen/watt and LEDs of CREE / OSRAM / NICHIA to be used; Operating Temperature : - 20°C to +50°C. Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements. it has support plates for LED module & wiring easily removable. It has appropriate space for auxiliary devices for plate wiring. It is responsibility of the installer the correct installation & electric connection in accordance with applicable regulation. Mentioned dimensions are proposed dimensions, which may vary with actual measurements (Tolerance of ±5%). Test & Certificates- BIS, LM79, LM80, IEC Safety test reports.

Finish: Color specification & finishing process must follow as per the ISI standard. All parts must be clean by SHOT blasting process. Further parts are painted in 4 layer coating(Coating thickness-125 to 150 micron) in which first layer with epoxy primer(to prevent corrosion),second layer with epoxy base colour,than third layer polyurethane (PU) metallic paint (Gold/Green/Copper/Silver) & final layer of polyurethane (PU) lacquer (to prevent ultra-violets ray). Make- Dwarka India Brand Material Specification: All this above parts made of cast iron castings must be of FG-150 grade as per IS 210 (2009) standard, Hardness must be in range between 130 BHN to180 BHN. Cast iron must have Chemical composition of Carbon -3.0% to 4.0% Silicon- 1.0% to 2.0%, magnesium -0.5% to 0.7%,sulpher -0.02% to 0.04% & phosphorous-0.07% to 0.09% this composition is best suitable for product strength & life.

Supply of IP 67 protected LED light ,220-240V, 50Hz (Integrated Driver) , Toughed Glass , luminiaire body made of Pressure die cast aluminium ,Driver shall be high efficiency having efficiency > 85% and in compliance to IEC standards (integral with light fixture). System life of 25000 Burning Hours 70% of initial Lumens maintained Power factor >0.95, and CRI>70. Surge protector device Complete as required

10 WATT SPIKE LIGHT WW (WARM WHITE)

Supply of IP 67 protected LED light ,220-240V, 50Hz (Integrated Driver), Toughed Glass , luminiaire body made of Pressure die cast aluminium ,Driver shall be high efficiency having efficiency > 85% and in compliance to IEC standards (integral with light fixture). System life of 25000 Burning Hours 70% of initial Lumens maintained Power factor >0.95, and CRI>70. surge protector device complete as required

10 WATT FOOT LIGHT (Warm white)

SITC of IP67 power supply 24V output. Power consumption- 200W Make- Meanwell

200 w Power Supply

Supply, installation, testing & Commissioning of 8X512 DMX 512 Controller, Input Power 12V DC, Output Protocol DMX512 (x6), eDMX, LED Pixel (SPIx2) Programmability PC, Mac, iOS, Android, Connections Type C USB & Ethernet, Battery Memory microSD slot, SD Card, Environment IP20. Buttons 2 buttons to change scene, + 1 button to change zone, Stand alone mode with 2000 scenes, Play scenes in 20 areas/zones, DIN rail mounted,Dimensions 160x91x62mm 371g, OS Requirements Mac OS X 10.8-10.14, Windows 7/8/10. complete as required Approved Makes : Martin , Nicolaudie , Entecc

DMX CONTROLLER

Supply, installation, testing & Commissioning of Signal Booster/Splitter with 4-Way output for spreading and amplyfing the DMX Data signals in multiple directions, Input-220-240V AC approved completeas required Makes : Martin , Nicolaudie , Hengle.

SPLITTER / BOOSTER

Supply, installation, testing & Commissioning of Signal Booster/Splitter with one Way output for spreading and amplyfing the DMX Data signals in multiple directions, Input-220-240V AC approved completeas required Makes : Martin , Nicolaudie , Hengle.

SPLITTER / BOOSTER

Supply, installation, testing & Commissioning of DMX Special cable DMX cable (single pair) having one 22AWG pair stranded (7x30) tinned copper conductors, Datalene (FHDPE) insulation, twisted pairs, overall Beldfoil shield (100% coverage) plus tinned copper braid, PVC jacketCable.completeas required approved makes : Hengle , D link , Belden

DMX CABLE

Programming, Testing, Troubleshooting and synchronization of DMX control system with the new controller. The shifting of various data wire connections for the proper scene settings including the addressing of fixtures with the multiple scenes(atleast 20Themes) as per instruction of engineer in charge.

Supply & laying of 3-5 w led Spot fixture of 3000k (+300 degree k) for outdoor application IP 66, Housing should be made of aluminum ,220-240 v,50 Hz, system efficacy should greater than equal to 65 lumens per watt, complete as required

Percentage BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

(Electrical BSR 2022)

S&F following sizes (dia.) of ISI marked virgin material MMS ( IS:9537 P - III ) PVC conduit along with ISI marked (IS:3419-1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR

25 MM CONDUIT

Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Arrmoured Aluminium cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with H4- Grade electrolytic aluminium conductor confirming to IS 8130 of purity >99.6 %, round / flat strip armouring of cables, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie) including testing etc. as required of following size. OEM must have it's own in house NABL accrediated Laboratory for testing procedure as per IS:10810.For additional technical parameters of product / work refer Annexure 'A' attached with this BSR

6.0 Sq. mm 3 core

10.0 Sq. mm 3 core

25.0 Sq. mm 3.5 core

35.0 Sq. mm 3.5 core

120.0 Sq. mm 3.5 core

240.0 Sq. mm 3.5 core

Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Un-armoured Copper cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with electrolytic grade Copper made of copper rods confirming to IS 613-1964, of purity >99.7 %, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray (with cable tie) including testing etc. as required of following size. OEM must have it's own in house NABL accrediated Laboratory for testing procedure as per IS:10810 For additional technical parameters of product / work refer Annexure 'A' attached with this BSR

2.5 SQ MM X 3CORE CU UNARMOURED

1.5 SQ MM X 3 CORE CU UNARMOURED

Supplying and making one end termination with Nickel plated heavy duty brass single compression gland (as per IS 12943-1990)) SIBG type consisting of Check Nut, Gland Body, Metal Washer(3 Nos.), Outer Seal Rubber Ring, Compression Nut, heavy duty aluminium lugs (as per IS 8309 -1993) duly crimped with crimping tool, PVC tape as per IS 8337-1976 of following size of PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

3 x 6.0 sq.mm

3 x 10.0 sq.mm

3.5 x 25.0 sq.mm

3.5 x 35.0 sq.mm

3.5 x 120.0 sq.mm

3.5 x 240.0 sq.mm

Supplying and making end termination with heavy aluminium lugs ( Pin / ring type ) confirming to IS 8309 -1993 & IS 8337-1976 duly crimped with crimping tool, PVC tape etc of following size.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

SITC of IP-42 and general construction confirming to IS:8623 : 1993, wall/ free standing floor mounted dust and vermin proof compartmentalised cubical panel as specifications and Other parameters required as per point (a) ,(b), (c),(d), (e), (f), (g), (h) as below:- (a)Thickness of CRCA sheet shall be 2.0 mm, cable alley compartments having concealed hinged type doors with key type lock with / without detachable extension type structure. Removable 3 mm. thick sheet steel gland plates with appropriate size of knockouts for cables shall be provided

(b)complete panel shall undergo a process of degreasing, Water rinsing, Activation, derusting, pickling in acid bath, phosphatising & shall be subjected to nine tank process and then Powder coated with approved shade of minimum 70 microns on both side of panel. The panel having PE foam/ Neoprene rubber gasket of not less than 3mm thickness ,required hardware , concealed hinged door with key type locking arrangement for equipment/switchgear earthed with 2.5 sq.mm braided copper wire

[c) Interconnection between bus bar and switchgears /cable shall be rigidly supported and made out by flexible copper wires (up to 63 amp ) and by solid bus bar (>63 amp ) . control wiring will be carried out with 1.5 Sq.mm, Earth wire with 2.5 Sq.mm and CT with 2.5 sq.mm flexible copper wire only. All joints / interconnections of copper bus bar shall be dully tinned . Clearance between main bus bar and risers / metal parts shall be at least 10 mm additional to width of bus bar Bus bar is insulated by Heat Shrinkable sleeves . Earth and Neutral bus bar shall be half of the size of phase bus bar. ( Cost of Bus bar / Flexible wire for Interconnection between Main busbar and Switchgear is to be Paid Extra )

(d)Wiring between components within switchgear and Incoming / outgoing cable shall be done through the terminal block only. Direct connection shall not be permitted. Each terminal block shall be one piece moulded, barrier type, 650 volt grade, complete with washers, heads, studs with two nuts and identification strips and shall have adequate continuous current rating. For tap-offs, adjacent terminals with shorting strips shall be used. 10% Spare terminal blocks shall be provided. Wire identification on marking strip shall correspond to the designation of the wiring diagrams. All wire terminals on the equipment shall also be marked with designation corresponding to those of the wiring diagram

(e)All wiring shall be enclosed in plastic channels and neatly bunched and closed in metering chamber, Wiring between terminals of various devices shall be ‘point to point’ (no wire splitting or tee connections) with wires neatly trucked along the back of the panels, adequately supported to prevent sagging.

(f)Floor mounted panel shall be mounted on Base frame of ISMC channel size 100 x 50 x 5 mm ( to be paid Extra

(g) Tests: The insulation resistance (with 1000 V Megger) and High voltage Power frequency test (by applying a voltage of 2.5KV for one minute) shall be measured between phases, between phase and neutral and between phase and earth. both before and after high voltage power frequency test. The insulation resistance shall not be less than three megaohm. CT Secondary current injection test shall also be carried out.

(h) only outer surface area on all sides shall be measured & panel to be fabricated only from CPRI approved fabricator only (CPRI Test certificates to be submitted)All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

Supplying and fixing of Aluminium (IEC 60105 ISO 209-1,2) / Copper (IEC 60028) bus bar by means of SMC / DMC type insulator with standard short circuit withstand capacity , high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleeves. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . 8.2.1 Electrolytic grade Aluminium bus bar 6010 grade

BUS BUS BAR

P & F in position frame made out of M.S. angle (riveted or welded) finished with two coats of red oxide and two coats enamel paint including cutting, welding, holes etc.of following sizes as required.For additional technical parameters of product / work refer Annexure 'A'

ANGLE 50X50X6 MM

SITC of 3 /4 pole current limiting Moulded case circuit breaker (MCCB) made of flame retardent & heat resistant material having following current rating, short circuit breaking capacity at 440/415 V, 50 Hz; O/L & S/C settings , conforming to IS/IEC 60947 P -2 :2003 with front face and centralised adjustable, trip free mechanisum, true contact position indicator, line load interchangeability, designed for both horizontal & vertical mounting without any adverse effect on electrical performance, suitable for operation upto 55 degree and without derating upto 40 degree, pollution degree 3, having positive isolation capability, push (test) to trip, trip time less then 10 ms under s/c condition, Breaking capacity Ics = 100% Icu. U imp =8 KV, rated insulation voltage 690 V. provision for UVR , shunt trip , earth fault trip, door interlock, pad lock & rotary handle , including making connections etc. as required.OEM shall have submit NABL / CPRI / ERDA accrediated lab type test certificate before execution All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR

up to 100 Amp , 25 kA, adjustable O/L & adjustable S/C setting,

4 pole MCCB With Thermal Magnetic release 160 Amp , 25 kA, adjustable O/L & adjustable S/C setting

250 Amp , 35 kA, adjustable O/L & adjustable S/C setting,

400 Amp , 35 kA, adjustable O/L & adjustable S/C setting,

Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as per type of load and site requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947- 2, low watt losses, trip free mechanisum , energy limiting of class 3 as per IEC, minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , IP 20 contact protection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above rating including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR

Single pole MCB (With B/C curve tripping Characteristics)

6 A to 32 A rating

Double pole MCB(With B/C curve tripping Characteristics)

6 A to 32 A rating

Providing & Fixing of mechanical / digital time switch having following day / week programme and minimum 100 hours reserve and AC1 rating of 16-20 amperes including making connection, programming conforming to IEC 60730-1 and 60730- 2-7 etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR

One day reserve (Analog type

Providing & Fixing of AC operated heavy duty 230 /440 Volt power contactor as per PWD specification for electrical Works, ISI marked IS/IEC 60947-4-1 : 2000 having provision of mechanical interlocking, auxilary contacts, Din rail mounting type including making connections, testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

4 pole Power contactors with following AC 1 Rating 100 AMP

Providing & Fixing of IS: 13875 & IEC :61326 confirming LED Digital type (up to 500) V range Volt meter / Direct- Ammeter / CT oertated ammeter/ Frequency meter / KWH meter / Multi Function Meter / Power analyzer of class 1 accuracy as per IS : 1248 of size 96mm x 96 mm including making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

AMMETER

VOLTMETER

Providing & Fixing of BIS approved Current Transformer as per PWD specification for electrical Works ,ISI marked as per IS 2705-1992/ conforming to IEC 60044-1, with secondary terminal of CT shall be brought out suitable to a terminal block which shall be easier accessible for testing and terminal connection , with all necessary support in existing panel including connection etc. as required Current transformer Ring Type Tape Wound/Resin Cast Wound as per IS 16227 with, Accuracy Cl, CT ratio and burden as specified. ISF<=5, Cu cross section of secondary wire 1.5sqmm (minimum), including all necessary support in existing panel including connection etc. as required . All as per pre approved by Engineer in charge.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

8.4.1 Ring type tape wound CT 8.4.1.1 C T Class 1, Ratio upto 150/5, Burden 5 VA

Providing & Fixing of 110/220 V, unibody LED Indicating lamp IEC 60947 with integral circuit, IP 65 above panel & IP 20 terminal block, Approx. body dia for panel not less then 20 mm, length min. 50mm, front LED cover dia min. 29 mm, contact material phospher bronze for Led, PCB contacts shall be of brass (tin plated), impulse dielectric tested for 2.5 KV, Rated insulation resistance shall be 100 M ohm at 500VDC including connection etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

Red/yellow/Green colour

Supply and installation of high tensile low carbon steel rod molecularly bonded with 99.9 % Copper thickness (250 microns) and confirming to UL 467, IS/IEC 62561-2 of following size and length and as per point mentioned (a), (b), [c), (d), (e) below :-

(a) Bore a hole of dia. 100 mm of required length, Place the rod in the centre of Hole

(b) filled with anti corrosive conductive compounds with the permanent sealings at both the ends, CPRI/ ERDA tested with RMS capacity of minimum 30 KA for withstanding 1 second .To ensure the moisture content and electrical conductivity, 25 kg for 2000 mm & 50 Kgs for 3000mm of resistance lowering earth enhancement material shall be used as a backfill compound. The compound shall be tested form NABL acredeated lab for low resistivity ( less than 0.12 Ohm - meter ) & high conductivity in nature with carbon as a major content as per referance of IS 3043-1987,IEEE 80-2013 (clause 14.5d) , IEEE 837 & IER 1956 with latest amendemnts

© Connect the rod with copper Strip/Conductor/Wire with suitable clamp made from tinned copper and SS 304 Bolt

(d) Place Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm.

(d) Testing of earth resistance for value of 5 ohms or less as required & must record by engineer in charge during site visit and ensure to enter in measurment book.

(e) Test certificates for confirming above standards from OEM is mandatory. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

17.2 mm thick and 3 Mtr. Long

Supply & Laying following size earth strip in horizontal or vertical run in surface by means of Earth strip DMC Insulator including riveting/ soldering/ welding, Jointing shall be done by overlapping and with 2 set of Brass (for Cu strip) / GI (for GI Strip) nut bolt & spring washer spaced at 50cm making connection etc. as required.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

20mm x 3mm copper strip

P / L of Double wall corrugated HDPE pipe confirming to IS : 16205 P-24, Stiffness Class 750 N, Externally corrugated and having smooth surface inside with HDPE Coupler, Elbow, Tee at required Depth below the ground for laying cable of following Nominal Outer dia. MFR Test report from NABL accrediated is to be submitted.(Excavation of Earth & Back filling with compaction is to be Paid Extra)All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

Providing and fixing of IP 65 protected Polycarbonate / Polysterene fuse box moulded with inside knock outs of following size with hinged cover, transparent window, PU gasket, locking arrangement, duly holded with 2 nos. pole clamps of 20 mm x 3 mm flat with nut and bolts, The box shall be provided with Din rail, 4 / 8 way 10.0 / 16.0 sq.mm heavy duty connector, earth terminal, complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

160 mm X 225 mm X 100 mm

Providing & Fixing of IP - 65 protected impact resistant polycarbonate / Polysterene enclosures with knock out for cable entry/out including fixing with nut, bolt, fatner etc as required complete in all respect of following sizes.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

Please Enable Macros to View BoQ information