Supply Installation Testing and Commissioning for Creation of 200KVA Sub-Station along with laying of Underground 11KV Line for New Aviation Fuel Station IOCL Spituk Gupuks on full turnkey basis under Deposit Work 2025 26

Amount

Supply part

Earth work excavation by manual means in trenches for foundations, drains, pipes, cables etc (not exceeding 1.5m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottom lift upto 1.5m, including getting out evcavated earth and disposal of surpulus excavated earth as directed by Engineer-in-charge

Filling available execavated earth(excluding rock) in trenches, plinth, sides of foundation etc in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Disposal of excavated earth (Carriage of materials) beyong 3KM

Supply of 1 core x 400sqmm XLPE Al Armoured cable (main conductor) 11KV including one spare

Supply of 160mm HDPE Pipe along with clamps for cable termination on tubular pole

Supply of Jointing Kit

Supply of RCC Route indicator (base dimansion 250mmx1599mm, Top dimnsion 700mmx75mm, Heaight 1250mm) cement concreate 1:2:4, Rainforcement detail: 6mm iron round ring=5Nos, 6mm vertical bar=12Nos. 12 guage GI wire mesh and with written indication of 11KV HT Line

Laying of 1core x 400sqmm XLPE AL armoured cable (main conductor) 11KV including one spare

Laying of 160mm HDPE pipe along with clamps for cable termination on tubular pole and road crossing

Termination of 400sqmm HT 11KV Single core cable including one spare

Fixing of RCC Route indiactor (base dimention 250mmx1500mm, Top dimnsion 200mmx75mm, Heaight 1250mm) cement concreate 1:2:4, Rainforcement detail: 6mm iron round ring=5Nos, 6mm vertical bar=12Nos. 12 guage GI wire mesh.

Installation/Commissioning/Testing ( Labour part)

Earth work excavation by manual means in trenches for foundations, drains, pipes, cables etc (not exceeding 1.5m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottom lift upto 1.5m, including getting out evcavated earth and disposal of surpulus excavated earth as directed by Engineer-in-charge

Filling available execavated earth(excluding rock) in trenches, plinth, sides of foundation etc in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Disposal of excavated earth (Carriage of materials) beyong 3KM

Supply of 1 core x 400sqmm XLPE Al Armoured cable (main conductor) 11KV including one spare

Supply of 160mm HDPE Pipe along with clamps for cable termination on tubular pole

Supply of Jointing Kit

Supply of RCC Route indicator (base dimansion 250mmx1599mm, Top dimnsion 700mmx75mm, Heaight 1250mm) cement concreate 1:2:4, Rainforcement detail: 6mm iron round ring=5Nos, 6mm vertical bar=12Nos. 12 guage GI wire mesh and with written indication of 11KV HT Line

Laying of 1core x 400sqmm XLPE AL armoured cable (main conductor) 11KV including one spare

Laying of 160mm HDPE pipe along with clamps for cable termination on tubular pole and road crossing

Termination of 400sqmm HT 11KV Single core cable including one spare

Fixing of RCC Route indiactor (base dimention 250mmx1500mm, Top dimnsion 200mmx75mm, Heaight 1250mm) cement concreate 1:2:4, Rainforcement detail: 6mm iron round ring=5Nos, 6mm vertical bar=12Nos. 12 guage GI wire mesh.

Supply part

200 KVA, 11/0.433kV, 3-phase Distribution Transformers with Bimetallic Terminal Connectors Energy Level- 2, (Aluminium wound upto 25kVA, Copper wound for 25kVA or higher kVA ratings) , and with LV Cable Box having detachable Aluminium Gland plate

Gapless Surge Arrestor,9 kV ,10 kA ,LA with polymer housing, Stn. Type

11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp,Vertical Type

11 kV Horn Gap Fuse Set 3 Phase 200A

185mm² Cable, 1.1kV Grade, PVC Insulated Stranded Conductor FRLS type

9 Mtr. Long Pole,ST-410 SP33)

33kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 900mm

GI Channel/Angle/Flat of sizes including clamps

Galvinized Nuts and Bolts.

Earthing of substation --Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover.

33kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 900mm

LT Distribution Box for 200 kVA DTR with TPN MCCB short ckt rating 16 KA for incomer 140Amp and suitable MCCBs for outgoing circuits with terminal extensions

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Wedge Connectors/PG Clamps

Danger Plates with Clamps

GI Barbed Wire for Anti Climbing

3-pahse, 4-wire Trivector Smart Meter with CT (LTCT AMR compatible)

Cement bottoming 1:2:4 mix as per REC standards.5cum/pole

Painting of Poles Red Oxide

Painting of Poles Aluminium Paint

Sundry items like aluminium lugs, jumper, binding Tape

Transformer Fencing

40mm aggregate/Gravels inside fencing

Installation/Commissioning/Testing ( Labour part)

200 KVA, 11/0.433kV, 3-phase Distribution Transformers with Bimetallic Terminal Connectors Energy Level- 2, (Aluminium wound upto 25kVA, Copper wound for 25kVA or higher kVA ratings) , and with LV Cable Box having detachable Aluminium Gland plate

Gapless Surge Arrestor,9 kV ,10 kA ,LA with polymer housing, Stn. Type

11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp,Vertical Type

11 kV Horn Gap Fuse Set 3 Phase 200A

120mm² Cable, 1.1kV Grade, PVC Insulated Stranded Conductor FRLS type

9 Mtr. Long Pole,ST-410 SP33)

33kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 900mm

GI Channel/Angle/Flat of sizes including clamps

Galvinized Nuts and Bolts.

Earthing of substation --Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover.

33kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 900mm

LT Distribution Box for 200 kVA DTR with TPN MCCB short ckt rating 16 KA for incomer 140Amp and suitable MCCBs for outgoing circuits with terminal extensions

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Wedge Connectors/PG Clamps

Danger Plates with Clamps

GI Barbed Wire for Anti Climbing

3-pahse, 4-wire Trivector Smart Meter with CT (LTCT AMR compatible)

Cement bottoming 1:2:4 mix as per REC standards.5cum/pole

Painting of Poles Red Oxide

Painting of Poles Aluminium Paint

Sundry items like aluminium lugs, jumper, binding Tape

Transformer Fencing

40mm aggregate/Gravels inside fencing

HT Line (Supply Part )

9 Mtr. Long Pole( ST-410 SP33)

GI V cross-arm with top Bracket including clamp(14.631 kg/complete V-set)

30 mm² ACSR Conductor

33kV Polymeric composite Pin Insulator 36kV, 10kN, Lighting Impulse 170kV Positive and 180kV Negative, creepage distance 900mm

33kV Polymeric composite Disc Insulator 36kV, 70kN, Lighting Impulse 170kV Positive and 180kV Negative, creepage distance 900mm

Supply of GI Channel X-arm including clamps and braces for DP (80Kg/DP)

Galvinized Nuts and Bolts

Danger Plates with Clamps

Anti-Climbing Device with Clamps

Earthing Complete by GI Pipe 40 mm or GI Rod 20mm 2.5 mtr long through GI Strip.

Red Oxide

Aluminium Paint

Cement bottoming 1:2:4 mix as per REC standards .45cum /pole

Running earthing on HT Line

11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp,Vertical Type

Installation/Commissioning/Testing ( Labour part)

9 Mtr. Long Pole( ST-410 SP33)

GI V cross-arm with top Bracket including clamp(14.631 kg/complete V-set)

30 mm² ACSR Conductor

33kV Polymeric composite Pin Insulator 36kV, 10kN, Lighting Impulse 170kV Positive and 180kV Negative, creepage distance 900mm

33kV Polymeric composite Disc Insulator 36kV, 70kN, Lighting Impulse 170kV Positive and 180kV Negative, creepage distance 900mm

Supply of GI Channel X-arm including clamps and braces for DP (80Kg/DP)

Galvinized Nuts and Bolts

Danger Plates with Clamps

Anti-Climbing Device with Clamps

Earthing Complete by GI Pipe 40 mm or GI Rod 20mm 2.5 mtr long through GI Strip.

Red Oxide

Aluminium Paint

Cement bottoming 1:2:4 mix as per REC standards .45cum /pole

Running earthing on HT Line

11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp,Vertical Type

M/S SONAM ANGCHOK (BID ID -156993)

M/S CHHIRPON BUILDERS (BID ID -156979)