SPECIAL REPAIR TO BLDG NO P-91 (OFFRS MESS) OF 92 BH, AT BB CANTT, SRINAGAR

Amount

Taking down shutters exc 1 sqm and n.exc 2 sqm each and removing from site complete all as specified and directed.

Taking down frame with shutters (without taking off shutters from frame) n.exc 1.5 sq.m each and removing from site complete all as specified and directed.

Taking down frame with shutters (without taking off shutters from frame) exc 1.5 sqm but n.exc 4 sqm each and removing from site complete all as specified and directed.

S&F 2nd class hard-wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and directed.

M&L for 35mm thick 2nd class hard wood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln easoned and chemically pressure treated complete all as specified and directed.

S&F 30mm thick 2nd class hardwood factory made glazed and skeleton door/window shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F powder coated aluminium anodised (minimum thickness of powder coating 50 micron) doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections/ 3 truck and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete all as specified and directed.

S&F aluminium anodised door shutters powder coated of any colour (Thickness or powder coating not less than 50 micron Anodised , aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws, handle, locking arrangement etc. complete all as specified and directed.

S&F aluminium anodised window and ventilator shutterspowder coating of any colour (Thickness or powder coating not less than 50 micron , fixed type/sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handle, locking arrangement etc. complete all as specified

S&F anodised aluminium grill (anodised transparent or dyed to requird shade according o IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening including powder coated aluminium (minimum thickness of powder coating 50 micron) all complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified.

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples etc complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

S&F 9mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work complete all as specified and directed.

S&F 6mm thick Non Asbestos fibre cement designer board /Pre Laminated self embosssed texture designer board E-Board classic size 600x600mm, HPSC (High pressure steam cured) to be fixed or inserted to pre laminated GI frame work for seamless ceiling size 600mm x 600mm with main runner 38x24x0.9mm thick, cross tee 8.6x24x0.9mm and wall angle 19x19x0.9mm duly suspended with 6mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip complete all as specified and directed.

M&L PVC insulation panels with EPS stuck to 1mm printed PVC sheet suitably placed in false ceiling including necessary fillets/cornices at the edge including grid made of Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. with 6mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip complete all as specified and directed.

S & F 5mm thick printed PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement site, laid over suitable frame including necessary fillet/cornices etc complete all as specified and directed.

S&F 1.5mm thick decorative laminate type 1 of surface finish, colour and pattern including necessary fillets/ cornices as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

S&F 12mm thick Block board, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work including required teak wood lipping all as specified and as directed.

S & F stainless steel butt hinges medium weight 100 mm size etc complete all as specified and directed.

S & F stainless steel butt hinges medium weight 75mm size etc complete all as specified and directed.

S & F 150 mm size extruded aluminium handles fabricated type, anodised all as specified and directed.

S & F 150 mm size aluminium anodised barrel tower bolts of extruded sections all as specified and directed.

S & F 250mm aluminium alloy, anodised, sliding door bolt with hasp, staple & fixed clips of sheet, cast or extruded section & fixed bolts & sliding bolts of extruded section or cast aluminium alloy all as specified and directed.

S & F 100 mm size aluminium anodised hasp and staple, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws all as specified and directed.

S & F 30mm width flap, Continuous (piano) hinges, mild steel, bright finish or electrogalvanised all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified and directed.

M&L for brickwork with old size sub class 'B' bricks straight or curved on plan exc 6m mean radius and built in CM 1:6 complete all as specified and directed.

Taking down cement plaster of any description, on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M & L for rendering 15mm thick cement plaster in CM (1:6) on brick work or concrete surfaces finished even and fair complete all as specified and directed.

M & L for rendering 10mm thick cement plaster in CM (1:4) on brick work or concrete surfaces finished even and fair complete all as specified and directed.

M&L for raking out joints/pointing to random rubble masonry uncoursed or brought up to courses on old walls built in cement mortarcomplete all as specified and directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed.

S&F for Framed brackets of angles or tees with web and flanges, tubular pipes cut to shape,drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F stainless steel railing of Grade 304 including necessary fittings & fixtures as appproved by GE complete all as directed

M&L double charged Vitrified Ceramic tiles 10 mm thick (square/ rectangular) dark shade, polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including 15mm thick screed bed in CM 1:6, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) etc complete all specified and directed.

M&L coloured glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match fixed over and including 10mm thick backing coat in CM 1:4, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) etc complete all as specified and directed.

M&L coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including 15mm thick screed bed in CM 1:6, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) etc complete all specified and directed.

Hacking out old broken glass (any thickness size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

S&F 12mm thick toughned glass as in hinged door, partitions automatic door with necessary long solid fency handle, suitable hinges, locking arrangment, hydraulic floor spring as required, design in printing of unit logo and unit name over the glass at door as approved by GE complete all as specified and directed.

S&F 10mm thick toughned glass cubical as in hinged door, partitions, with necessary long solid fency handle, suitable hinges, locking arrangment, hydraulic floor spring as required, design as approved by GE complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. Laid bedded in any mortar complete all as specified and directed

M&L for 18-20mm thick Granite (of any type) in steps, jambs, pillars, window- cills, cooking platforms and like including rounding edges, laid over 15mm thick in cement mortar (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified & directed.

M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes including necessary bends, fittings etc single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes including necessary bends, fittings etc single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F Steel water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors of 15mm bore including taking up or down steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed.

S&F Steel water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors of 20mm bore including taking up or down steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed.

Lagging to pipes internal dia 15mm used in internal water supply or plumbing all round with, 40mm thick bonded mineralwool preformed ‘SNAP ON ’pipe sections of density 144Kg/cum conforming to IS9842 including chicken mesh wire netting 25 gauge, 20mm mesh and POP on top surace including removing old legging where required, complete all as specified and directed.

Lagging to pipes internal dia 20mm used in internal water supply or plumbing all round with, 40mm thick bonded mineralwool preformed ‘SNAP ON ’pipe sections of density 144Kg/cum conforming to IS9842 including chicken mesh wire netting 25 gauge, 20mm mesh and POP on top surace including removing old legging where required, complete all as specified and directed.

S & F in repairs sinks with drainage board (double bowl) made of stainles steel 1 mm thick kitchen or laboratory with plugs washers and waste pipes, including bedding in cement mortor to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx 460mm, each bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs 15mm bore Brass CP mixer (sink/WHB/wall) for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repairs 15mm bore Bib taps, chromium plated, fancy type, screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and directed.

S&F in repairs 15mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F in repairs 15mm bore stop valves or angle valve, fancy type chromium plated, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions etc complete all as specified and directed.

S&F 500 litres capacity rotational moulded polye-thylene water storage tanks three layers (cylindrical vertical with closed top) hoisted and fixed in position including brass float valve all as specified in SSR Part I including dismantling old unserviceable PVC water tanks complete all as specified and directed.

Demolition of plain cement concrete(un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) etc complete all as specified and directed.

M&L for rubber moulded chequered cement concrete tiles with grey cement and pigments 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors laid over and including 20 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete fixed over and including 15 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed.

M&L for rubber moulded Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment laid over 30mm thick sand layer complete all as specified and as directed.

M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in sub base/levelling course complete all as specified.

M&L for 75mm thick PCC (1:4:8), Type D-2 (using 40mm graded crushed stone aggregates) as in sub base or floors etc. complete all as specified and as directed.

Demolition of Concrete (reinforced) of any description and in any position not otherwise specifically provided for, complete all as specified & directed.

M&L for RCC (nominal mix) 1:2:4 type B-1 (using 20mm graded stone aggregate) as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including use and waste formwork complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge thickness , including nanital or similar pattern roof covering complete all as specified and directed.

S&F 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with coach screws and washers, in roof, wall etc with grade of zinc coating 275 complete all as specified and directed.

S&F 0.63 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, fixed with coach screws and washers, in roof, wall etc complete all as specified.

S&F 2mm thick Fibre glass reinforced translucent plain / corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed.

Dismantling of timber scantlings 40 sq. cm and over in section, in any position unframed work complete all as specified.

M&L for second class hard-wood in scantlings wrought fixed in frame work complete all as specified.

S& F in repair cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) of 75 mm dia of outlet complete all as specified and directed.

S & F in repairs Vitreous China one piece (Flush cistern with EWC) water closet pan including PVC seat cover (closed pattern), CP health facet etc connection to drain (or outgoing pipe), complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repairs 125mm brass chromium plated shower roses including fixing to steel pipe complete all as specified and directed.

S&F in repairs vitreous china Oval type countersunk Wash hand basin inclusive 32mm dia waste fittings, brass, chromium plated , PVC waste pipe etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and waster pipe etc complete all as specified and directed.

S&F in repairs toilet paper holder, brass chromium plated, fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.

S&F in repair towel ring of brass chromium plated fixed with and including Chromium plated brass screws and wooden/plastic cleats all as specified and directed.

S&F in repairs soap dish, brass chromium plated, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm longcomplete all as specified and directed.

S&F in repairs vitreous china urinal, half stall type, white, including flush pipe, CP spray fittings & connections to flushing pipe and outgoing pipes complete all as specified and directed.

S&F in repairs 100mm bore, spun pipes, Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors, walls including necessary bends, fittings, stack clamp etc complete all as specified and directed.

S&F in repairs 50mm bore, spun pipes, Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors, walls including necessary bends, fittings, stack clamp etc complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over any surfaces complete all specified and directed.

M&L for preparation of old painted steel surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper complete all specified and directed.

M & L for preparation of old plastered surfaces of walls and applying two coats of oil bound distemper complete all specified and directed.

M&L for applying 2mm thick wall care white putty after complete removal of existing treatment from old plastered surfaces and to obtain smooth/even finish using sand paper complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F in repairs Harrison rails (curtain rails) , mild steel, chromium plated, 20mm bore with fixing brackets, stops, rollers etc complete all as specified and directed.

S&F wooden laminated flooring in strips of size 120 cm long and 20 cm wide and 6-8 mm thick, fixed with PVC sheet and cushion including fillets/cornices, laid over 12mm thick BWR plywood complete all as per manufracturer's instruction all as specified and directed.

S&F 15mm thick 1st class soft wood Australlian wooden panelling fixed with toughened and grouted as wall panelling including fillets/cornices & 9mm thick plywood BWR fixing on walls and two coat of varnishing, polishing and preparation with sneezing complete all as specified and directed.

Taking down carefully existing old burn out/unserviceable copper/aluminium point wiring any type (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing old materials tfrom site and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

M&L for point wiring with PVC insulated FRLS wire, 1100 volt grade with multistranded copper conductor wire of size 1.5 Sq.mm (Nominal area) any type any length drawn through in heavy duty ISI marked PVC Casing capping / PVC conduit of suitable size along with its all connected fittings accessories including providing of modular type/size of pressed steel terminal sunken boxes 1.6 mm thick or PVC flush type box and dully fixed it concealed on wall or surface on wall and providing alongwith modular type back and face top covered plate for housing / mounting of switches sockets, regulators etc and also using /drawind of 1.5 sqmm PVC insulated FRLS wire , 1100 Volt grade (ISI Marked) with multistranded copper conductor wire used as a continuous earth wire which is connected with terminated the box to ceing rose / fitting complete and including making good to all disturbed surfaces of wall/ceiling and floor area of wiring system and to match the existing surface of wall/floor/ceiling etc. all as specified and directed for following:-

One light/fan point controlled by one way switch 5 Amp

One 3/5 pin socket outlet, 5 Amps on same board

One 3/5 pin socket outlet, 5 Amps on independent board

One bell point controlled by one way switch 5 Amp

All as per Sl item No.100 above but using single runs of PVC insulated FRLS wire, 1100volt grade with multistranded copper conductor wire of size 2.5 Sq. mm (Nominal area) (ISI Marked) for 3/6 pin type15 Amp socket outlet point wiring system with controlled by one way switch fixed on independent board and also providing of 2.5 sqmm PVC insulated FRLS wire , 1100 Volt grade (ISI Marked) with multistranded copper conductor wire used as continuous earth wire complete all as specified and directed

S&F modular type switch 5/6 Amps 230 Volts , one module type/ size alongwith white back & face cover plate and frame complete for one way switching system complete as specified and directed.

S&F modular type socket 5/6 Amps AC 230 Volts 3/5 pin type combined with two modular type/size alongwith white back & face cover plate and frame complete all as specified and as directed.

S&F modular type switch 15/20 Amps 230 Volts , one module size/type alongwith white back & face cover plate and frame for one way switching system complete all as specified and as directed.

S&F modular type socket 15/20 Amps AC 230 Volts 5/6 pin type combined with two modular size/type alongwith white back & face cover plate and frame complete all as specified and directed.

S&F modular type bell push switch 5/6 Amps 230 Volts , one module size/type alongwith white back & face cover plate and frame for one way switching system complete all as specified and as directed.

S&F modular type fan regulator with hum free step type alongwith speed control know of capacity 120 watt 230 Volts , one module size/type alongwith white back & face cover plate and frame complete for one way switching systemcomplete all as specified and as directed.

S&F bell Ding Dong Type, AC 230 volt, Single Pole complete all as specified and as directed.

S&F ceiling rose three terminals type made out of polycarbonate , isolated body complete all as specified and directed.

S&F LED light fitting fixture of 20W, 6500K, 2000 lm decorative ultra slim with co extruded channel in thermally conductive material with plastic housing, heat sink, environmental friendly having power factor >0.95, surge protection 2.5KV energy efficient ready to use complete including providing of suitable type flate fexible cable for electric connection comlplete all as specified and directed.

S&F in repair/replacement of round/square surface/recess mounted LED downlighter panel with complete diffuser 15/18W including providing of suitable type flate fexible cable for electric connection comlplete all as specified and directed.

S&F ventilating exhaust fan made out of sturdy high quality engineering plastic, complete with louvers,and shutter operational of size 250mm sweep suitable to work on 230 Volts 50 Hz, 1200 RPM, coper winding including making of suitable type /size of hole on wall compete all as specified and directed.

S&F LED Mirror light fitting 10W, 6500K decorative ultra slim linear LED lighting fixture with extruded AL. heat sink, environmental friendly, energy efficient, including providing of suitable type flate fexible cable for electric connection comlplete all as specified and directed .

M& L for taking down carefully existing storage water heater any type any size and removing pvc connection including cleaning of inner tank and assembly and filling cavities with filler material, including painting geyser with mounting base complete one coat of synthetic enamel white paint by spraying and assemble the same and refixing at location as directed, along with all connecting fixing accessories like fastner/ nut, bolt, washer, PVC connection and Valve etc with all electrical wire connection complete all as specified and directed.

M& L for taking down carefully existing ceiling fan /exhaust fan any type sweep and removing fan blade including cleaning all dust particles and filling cavities with filler material, oiling, greasing and painting fan & blade with one coat of synthetic enamel white paint by spraying and assemble the same along with all connecting fixing accessories like rubber rell, nut, bolt, washer, lock pin etc and hanging the same in position along with all electrical wire connection complete all as specified and directed

S&F Sub main wiring system with two runs PVC insulated FRLS wire, 1100 volt grade with multistranded copper conductor wire of size 2x6Sqmm and one run of 1x6 Sqmm (Nominal area) (ISI Marked) as in earth wire any type any length drawn through in heavy duty ISI marked PVC Casing capping / PVC conduit of suitable size along with its all fittings and connected accessories and duly fixed concealed on wall or surface on wall including taking down old unservicable sub main wiring system and making good all disturbed surfaces match to the existing surface complete all as specified and directed . Note:- 3 runs of 6sqmm wire and one run of PVC cassing capping/conduit shall be measured and 1.0 RM.

S&F sheet metal enclosure duly powder coated with locking arrengment system and having double door TPN 4 way distribution board with IP-43 1K-09 protection system and having mounting chanel and connection bus bar system suitable for MCCB as incommer and MCB as outgoing 415 Volts 3 phase powe supply , complete with appropriate size copper bus bar and neutral and earth link confirming to as per cat pt No DBVTL004DD of make L&T or equivalent of make and model of Legrand / Schnider etc complete alongwith providing of 01No MCCB 160 Amps rating with rupturing cap 25 KA 3 pole 415 Volts and also 12 Nos of MCB SP 63 Amps 'C' Curve of the same make as of distribution board complete & including taking down of existing DBs with MCBs and making all necessary electrical connection and dully fixed surface on wall or concealed on wall with the help of cutting chases to wall for fixing of DB and making good the disturbed wall surface as per existing complete all as specified and directed.

S&F sheet metal enclosure duly powder coated with locking arrengment system and having double door SPN 8 awy distribution board with IP-43 protection system and having mounting chanel and connection bus bar system with having capacity 200 Amps and suitable size of common neutral link including taking down of existing DBs with MCBs and making all necessary electrical connection and dully fixed surface on wall or concealed on wall with the help of cutting chases to wall for fixing of DB and making good the disturbed wall surface as per existing complete all as specified and directed.

S&F MCB SPN 40 to 63 Amps, 230 Volts, 50 Hz AC supply suitable for 'C' series, 10 KA breaking capacity complete all as specified and directed.

S&F MCB SP 6 to 32 Amps, 240 Volts, 50 Hz AC supply suitable for 'C' series, 10 KA breaking capacity complete all as specified and directed.

Supply and laying GI pipe 40 mm bore medium grade with all fitting laid in trenches/ under road /floor/ pole/ wall for protection of cable including providing clamping arrangment for holding of pipe on pole/wall in proper size of clamps, nut bolt and washer etc complete all as specified and directed.

Supply and laying GI pipe 50 mm bore medium grade with all fitting laid in trenches/ under road /floor/ pole/ wall for protection of cable including providing clamping arrangment for holding of pipe on pole/wall in proper size of clamps, nut bolt and washer etc complete all as specified and directed.

Supply, laying and testing of LT cable XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor 1100 volt grade cross sectional area of size 90 sqmm 3.5 core including laid in trenches or fixing on poles or passing through pipes complete including taking out of old unserviceable cable any type any size complete all as specified and directed.

Excavation in trenches/ under road/ PCC path/hard standing not exc. 1.5 m wide and n. exc. 1.5m depth for laying of pipe / cable in any type of soft /loose soil and getting out etc complete all as specified and directed.

M&L for Sand cushioning for under ground cable provided with a layers of sand before laying cable and sand after laying and stretching the cable complete all as specified and directed.

M&L for brick covering width equal to length of brick for mechanical protection to cable with well burnt sub class 'B' bricks laid dry flat acomplete all as specified and directed.

Returning filling in including, spreading, leveling and well ramming in layers not exceeds 25 cm thick in any type of soil complete all as specified and directed.

Removing excavated material to a distance not exceeding 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.

S&F LED street light fitting 60 Watt with lense, toughned glass, IP 66 protection 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant with impact and corrosion resistant complete with making suitable size of bracket and MS clamps dully fixed on wall including providing of suitable type flate fexible cable for electric connection comlplete all as specified and directed.

M&L for earthing, complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (Earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.5 mtr below normal ground level connecting to the galvanised iron earth lead wire of 4mm dia by means of bolts, nuts, check nuts and washers of galavanised iron and earth strip protected by provision of GI light grade pipe 20 mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded of stone aggregate with XPM (weight not less than 4 Kg/Sqm) and frame of angle iron 25x25x6mm with lugs 02 Nos and with 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate common salt and charcoal filling test point made out of 40mm/6mm flat iron with fixing arrangement funnel wire mesh and earth work in hard dense soil returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs all as per electrical plate No 03 of SSR-2009 Part-I and connecting to earth test point complete all as specified and directed.

CLASSIC CONSTRUCTIONS

M/S SHIMAR STAR GLACIER

M/S Tajamul Ah Buchh

M/S Vivek Gupta and Co

M/S BASHIR AHMAD MIR

M/S ATTAR BUILDERS

Alishan Builders

M/S NORTHERN ELECTRICAL WORKS

M/S SUHEEL CONSTRUCTIONS