DAY TO DAY MAINT OF INTERNAL ELECTRIFICATION REPAIR MAINTENANCE OF INTERNAL WIRING, SUB MAIN WIRING , DB, EARTHING AND CONNECTED ITEMS AT MES IB, SEWAR FORT, AND PARADE GROUND AREA UNDER GE BHARATPUR

Amount

Identifying and rectifying the defects pertaining to internal electrification of any type and nature such as taking down defective switch/socket/ceiling rose/holders/fittings / fixtures any type, rectification of faulty electric circuits, tightening of loose connections, replacment of old u/s wiring /conduits/ casing caping & connections etc, complete all as specified and directed.

Identifying/detecting defects in unserviceable wiring and rectifying the defects pertaining to internal electrification of any type and nature such as taking down defective MCBs SP /SPN/DPs/TPN any type, rectification of faulty due to loose connection in electric circuits, tightening of loose connections, replacement of U/S MCBs, U/S portion of conductor etc, complete all as specified and directed. NOTE FOR ITEM NO 1 to 2 :- (a) All T & P/Stationeries and labour team required comprising of Nos of trained electricians & helpers will be provided by the contractor daily, as directed.(b) Rep of the contractor will present in complaint cell & responsible for receiving & attending the complaints from 08.30 Hrs to 04.30 Hrs the time of lodging the complaint. In absence of rep of Contractor penal recovery as decided by GE shall be imposed & on contractor.(c) Cost of minor stores such as screws,clamps,insulation tapes, nuts/ bolts, nail of required size etc shall be deemed included in the above quoted rate. However, major items such as switches, sockets, bell push, fan regulator etc shall be measured and paid separately under appropriate items of Schedule 'A'. (d) Complaints where complete replacement of circuit/point wiring required shall be measured under relevent item. (e) If contractor fails to rectify the complaint with in 24 hours after reciving, Rs 500/- per complaint will be penalised.

Supply only in replacement Switch piano flush type 5 Amps single pole one way complete, complete all as specified and as directed by Engineer-in-Charge.

Supply only in replacement socket out let multipurpose suitable for 2/3 pin 5 amp flush type, complete all as specified and as directed by Engineer-in-Charge.

Supply only in replacement switch socket combination 2 in 1, 3 pin, 5 Amp flush type, complete all as specified and directed.

Supply only in replacement switch socket combination 2 in 1, 5 pin 5 /15 Amps flush type, complete all as specified and as directed by Engineer-in-Charge.

Supply only in replacement ceiling rose surface type, 2-3 terminal 65x50mm, complete all as specified and as directed by Engineer-in-Charge.

Supply only in replacement step type fan regulator 300 watt, 230 volts, 50 HZ, AC, complete all as specified and as directed by Engineer-in-Charge.

Supply only in replacement batten/angle type holder insulated body with back plate, complete all as specified and as directed by Engineer-in-Charge.

Supply only in replacement bell push piano type 5 Amps, complete all as specified and as directed by Engineer-in-Charge.

Supply only in replacement electric bell ding dong 230 volt AC, complete all as specified and as directed by Engineer-in-Charge.

Supply only in replacement Integrel sleek extruded batten aluminium /CRCA channel fitting with LED T8 Lamp 20 watt complete with all accessories and including connecting up with three core twisted flexible copper conductor cable with suitable size of 230V, 50 Hz, complete all as specified and directed.Make crompton Cat No DIJB12 LT8 or equivelent in Bajaj or Philips/ wipro ,

Supply only in replacement baton integrated LED channel of 5W, 230V frequency 50/60 Hz integral sleek extruded polycarbonate LED channel with white acrylic cover, Power Factor not less then 0.9 as per Cat No BCLSB 05 WH of Bajaj or equivalent in approved make, complete all as specified and directed.

Supply only in replacement white powder coated CRCA housing with LEDs 24 W, 230 V, 50 Hz recess mounting LED 2 feet x 2 feet luminaries, Swamless front frame with flat white hight transmission acrylic cover complete with all accessories including connecting up with twin core twisted flexible copper conductor cable with suitable size of Make :- Crompton Cat No LCTLRNE-24-FO-CDL or equivalent in Bajaj/Philips/ make, complete all as specified and directed.

Supply only in replacement LED tube rod suitable for any type of LED Tube Light fitting of 18/20 watt, complete all as specified and directed.

Supply only in replacement modular Switch piano flush type 6 Amps, 230 V AC single pole one way, complete all as specified and directed.

Supply only in replacement modular Switch piano flush type 16 Amps, 230 V AC single pole one way, complete all as specified and directed.

Supply only in replacement modular socket outlet with shutter multipurpose suitable for 2 pin and 3 pin 6 amp flush type, complete all as specified and directed.

Supply only in replacement modular socket outlet with shutter multipurpose suitable for 6 pin 16 amp flush type, complete all as specified and directed.

Supply only in replacement modular bell Switch 6 Amps, 220 V single pole, complete all as specified and directed.

Supply only in replacement electronic modular fan regulator,Two module, electronic,step type and connection, complete all as specified and directed.

Supply only in replacement MCB single pole 32/40Amps, 10KA, 230 volts 'C' series, complete all as specified and directed.

Supply only in replacement MCB single pole 6 to 30 Amps, 10KA, 230 volts 'C' series, complete all as specified and directed.

Supply only in replacement MCB TPN 63 Amps, 10KA, 230 volts 'C' series, complete all as specified and directed.

Supply only capacitor 2.5 mfd 240V ISI mark complete all as specified and directed.

Taking down carefully existing unserviceable batten/surface conduit/ concealed conduit aluminium point wiring (light, fan, bell/buzzer, socket or power) complete including removal of unserviceable fittings such as switches, switch-sockets, ceiling roses, pendents, sockets, lamp holders, shades, fan regulators, light fittings, bells etc including sunken boxes and removing the retrieved materials from dismantling including making good the disturbed surface of walls, floors, ceilings etc to match with the adjoining work complete all as specified and as directed by the Engineer-in-Charge.

Dismantling of old U/s sub main wiring and service wire of any size and make complete all as specified and as directed by Engineer-in-Charge.

Taking down of unserviceable DBs/ switch fuses/ changeover in sheet steel enclosure complete with MCBs/Fuses/grips any capacity after disconnecting all cables etc and removing from site and making good disturbed surface of wall, floor etc. complete all as specified and as directed by Engineer-in-Charge.

M&L Point wiring with stranded copper conductor cable, 1100 volts grade (ISI marked) PVC insulated and unsheathed FRLS of size 1.5 Sq mm stranded core drawn in and including non metalic ridge concealed conduit with all fittings such as tees, bends etc terminating in and including New MS sunken box covered with and including 3 mm thick new bakelite laminated sheet top cover ‘Hylam’ for one fan or light or exhaust fan or bell/buzzer point controlled by one switch including provision of 1.50 Sqmm PVC insulated unsheathed copper conductor FRLS cable, solid multistanded as earth wire to common earth & connecting to earth dolly complete all as specified and directed by Engineer-in-Charge.

All as per item No 29 here-in-before but socket point on the same board with other switches complete all as specified and as directed by the Engineer-in-Charge.

All as per item No 29 here-in-before but socket point on the independent board complete all as specified and as directed by the Engineer-in-Charge.

All as per item No 29 here-in-before but one light point controlled by 02 way switch complete all as specified and as directed by the Engineer-in-Charge.

Ditto- all as per srl item No 29 here-in-before but with multi stranded copper conductor cable, 1100 volts grade (ISI marked), PVC insulated and unsheathed FRLS of size 2.5 Sqmm multistanded and with and including 2.5 Sqmm PVC insulated unsheathed multistanded copper standed conductor cable FRLSas earth continuity conductor to common earth and complete to earth dolly for one 16 Amp socket outlet point on the independent board complete all as specified and as directed by Engineer-in-Charge.

M&L Point wiring with multistranded copper conductor cable, 1100 volts grade (ISI marked) PVC insulated FRLS and unsheathed of size 1.5 Sq mm drawn in and including PVC casing and capping (ISI Marked) with all fittings such as tees, bends etc terminating in and including MS sunken box covered with and including 3 mm thick new bakelite laminated sheet top cover ‘Hylam’ for one fan or light or exhaust fan or bell/buzzer point controlled by one switch including provision of 1.50 Sqmm FRLS PVC insulated unsheathed copper conductor multistanded cable, as earth wire to common earth & connecting to earth dolly complete all as specified and directed by Engineer-in-Charge

All as per item No 34 here-in-before but socket point on the same board with other switches complete all as specified and as directed by the Engineer-in-Charge.

All as per item No 34 here-in-before but socket point on the independent board complete all as specified and as directed by the Engineer-in-Charge.

All as per item No 34 here-in-before but one light point controlled by 02 way switch complete all as specified and as directed by the Engineer-in-Charge.

Ditto- all as per srl item No 34 here-in-before but with multi stranded copper conductor cable, 1100 volts grade (ISI marked), PVC insulated and unsheathed FRLS of size 2.5 Sqmm multistanded and with and including 2.5 Sqmm PVC insulated unsheathed multistanded copper standed conductor cable FRLSas earth continuity conductor to common earth and complete to earth dolly for one 16 Amp socket outlet point on the independent board complete all as specified and as directed by Engineer-in-Charge.

S&F Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type multi purpose flush type 230 volt complete all as specified and as directed by Engineer-in-Charge.

S&F switch socket combinatin 2 in 1, 16 Amp flush type multi purpose 230 volt complete all as specified and as directed by Engineer-in-Charge.

S&F switch piano flush button single pole one way 6 Amps 230 volt grade complete all as specified and as directed by Engineer-in-Charge.

S&F ceiling rose surface bakelite 50 x 40 mm three terminal ISI marked including suitable size of PVC board make : Anchor code No 3290 penta or equivelent in Legrand. complete all as specified and as directed by Engineer-in-Charge.

S&F bell push flush type 5 Amps 230 volts grade. complete all as specified and as directed by Engineer-in-Charge.

M&L bell multi musical type 230 volts grade. complete all as specified and as directed by Engineer-in-Charge.

S&F step type electronic fan regulator EME type 450 watt. complete all as specified and as directed by Engineer-in-Charge.

S&F modular switch socket combination 2 /3 pin 6 Amps 2 module 230 volt. complete all as specified and as directed by Engineer-in-Charge.

S&F modular switch socket combinatin 2/3 pin 6/16 Amp 230 volt. complete all as specified and as directed by Engineer-in-Charge.

S&F modular switch 1 way 6 Amps 1module 230 volt grade. complete all as specified and as directed by Engineer-in-Charge.

S&F modular bell push flush type 5 Amps 230 volts. complete all as specified and as directed by Engineer-in-Charge.

S&F modular step type electronic fan regulator 2 module 120 watt. complete all as specified and as directed by Engineer-in-Charge.

S&F white cover plate with frame,2 module complete all as specified and as directed by Engineer-in-Charge.

S&F white cover plate with frame,6 module complete all as specified and as directed by Engineer-in-Charge.

S&F white cover plate with frame,4 module complete all as specified and as directed by Engineer-in-Charge.

S&F white cover plate with frame,8 module complete all as specified and as directed by Engineer-in-Charge.

M&L concealed submain wiring complete with 6 Sqmm single core multi standred PVC insulated and sheathed cable FRLS copper conductor two runs and one run of 6 Sqmm copper cable for earth continuity conductor in and including drawn through PVC conduit size not less than 20 mm dia with all PVC accessories. complete all as specified and as directed by Engineer-in-Charge.

M&L concealed submain wiring complete with 4 Sqmm single core multi standred PVC insulated and sheathed cable FRLS copper conductor two runs and one run of 4 Sqmm copper cable for earth continuity conductor in and including drawn through PVC conduit size not less than 20 mm dia with all PVC accessories. complete all as specified and as directed by Engineer-in-Charge.

Supply and fix Recess mounted 2x2 luminaire 24W comprises of thermally conductive material complete with all accessories internally pre-wired and including connecting to ceiling rose with three core flexible copper conductor cable of size 1Sqmm.Crompton Code No : LCTLRNE-24-FO-CDL or equivalent in Philips, Havells.

Supply and fixing of distribution board factory made 4 way TPN with busbar 415 volts (double door) and tested made of sheet metal enclosure powder coated suitable for mounting the MCB 240 volt, 415V of the following DBs :-Makes -L & T / Legrand.

S&F Sheet metal enclosure for distribution boards flushed in wall Double door suitable for fixing MCBs 240 volts with 200 Amps rated copper bus bar,SPN 8 ways, including taking down of old unsv DB,s and making good the disturbed surface of wall, complete all as specified and as directed by Engineer-in-Charge. Make -L&T ( Exora series)/Cat Part No 607711 of legrand /NBKRENSNDD08 in Schnedier or equivalent in Make Siemens

Ditto item 59 but for 4 way SPN Cat Part No 607710 in Legrand/ NBKRENSNDD04 in Schnedier or equivalent in Make L&T (Exora series )/Seimens complete all as specified and as directed by Engr-in-Charge

Supply & fix 12 way VTPN Distribution Board (with provision for MCCB as incomer & WiNtrip MCB as outgoing) Make:C&S CSDBMCCB100DD12IP43 or equivalent make in Indoasian/havells/L&T.

S&F MCCB's, MCB's with GI hardwaer of following capacity :- (a) MCCB 415 volts 125 Amps 04 pole 30 KA Make L&T Model:CM90679OOLO

(b) MCB TPN 63Amps C curve 415 V, 10 KA Make Havells Cat No:DHMGCTNF063

(c) MCB SP 240 volts 10-40 Amps

(d) MCB SPN 240 volts 32 Amps

(e) MCB isolator 240 volts, 40 Amps

S&F Linear LED T8 tubular lamp of 20 watt with extruded aluminium body,PC diffuser and inbuilt driver including compact batten suitable for LED T8 lamps , complete with all accessories internally pre-wired and including connecting to ceiling rose with three core flexible copper conductor cable of size 1Sqmm complete all as specified and as directed by Engineer-in-Charge.Cat Part No:DIJB12LT8-20 and Lamp -LGT8-20-865-2, Make Crompton or equivalent in Bajaj/Havells/Philips/Crompton.

M&L batten holder insulated with back plate including suitable size of PVC round block. complete all as specified and as directed by Engineer-in-Charge.

S&F sheet metal enclosure of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of SP 20 Amps, 240 volts. complete all as specified and as directed by Engineer-in-Charge.

S & F street light GI bracket of 0.6 mtr long made out of 40mm dia light grade GI pipe bend to shape of 120 degree end welded at required including 02 Nos MS clamp of FL 40 x 6mm including nuts bolts & washers complete necessary fixing arrangements on pole complete all as specified and as directed by Engineer-in-Charge.

S&F LED mirror light fitting 1 x 9 W 230 volts attractive wall / ceiling mounted type with decorative grey end caps, polycarbonate body and ribbed opal diffuser.matallic channel and white refelector suitabale for mirrior fitting,complete with all accessoris prewired and including connecting up with twin core twisted flexible copper conductor cable 0.5 sqmm size complete all as specified and as directed by Engineer-in-Charge..Make -Havells Code No LHEXARP6PN1W009 or equivalent in Philips.

S&F 20 watts LED street light fitings new generation energy saving, environmental friendly, long life, versatile pressure die cast aluminium IP66 with 10KV surge protection road way, luminaire with high power LED as light source with warranty option of 5 years and suitable drivers etc and connecting with 4.0 sq mm multistranded aluminium conductor PVC insulated twin core weather proof cable from fittings to over head lines or to the jucntion box and fixing to complete all as specified and directed , Make :- Crompton Cat NoLST-20-CDL-M or equivalent in wipro, Bajaj, Philips.

S&F LED light fitting 14 W,230V decorative wall mounting type with multicolour ABS housing with poly carbonate rings and glass shade with lamp holders connector block,etc complete with all accessaries pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.Cat No: LHFOECE1TZ1O014 in Havells or equivalent in Bajaj, Philips

S&F New generation, post-top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power 40 Watt LEDs as light source.Make:Havells RUBY (CLEAR) - IP65 LHEVBGP7PN6K040,Bajaj orequivalent

Supply & fix Die cast aluminium housing, transparent tempered glass diffuser, IP54 (up down light) with warranty option of 5 years and suitable drivers etc and connecting with 4.0 sq mm multistranded aluminium conductor PVC insulated twin core weather proof cable from fittings to over head lines or to the jucntion box and fixing to complete all as specified and directed , Make :- Jaguar model No: LWWL01X208XW or equivalent in wipro, Bajaj, Philips

Supply & fix Die cast aluminium housing, transparent tempered glass diffuser, IP54 (up light) with warranty option of 5 years and suitable drivers etc and connecting with 4.0 sq mm multistranded aluminium conductor PVC insulated twin core weather proof cable from fittings to over head lines or to the jucntion box and fixing to complete all as specified and directed , Make :- Jaguar model No: LWWL01X108XW or equivalent in wipro, Bajaj, Philips

Supply & fix 150 watts LED flood light fitings new generation energy saving , environmental friendly ,long life,versatile pressure die cast aluminium IP66 with 10KV surge protection road way,luminaire with high power LED as light source with warranty option of 5 years and suitable drivers etc and connecting with 4.0 sq mm multistranded aluminium conductor PVC insulated twin core weather proof cable from fittings to over head lines or to the jucntion box and fixing to complete all as specified and directed , Make :- Crompton Cat No LFLN-150-CDL/60-M or equivalent in wipro, Bajaj, Philips

S&F in replacement ceiling fan of 1200 mm sweep with Five star rating complete all as specified and as directed by Engineer-in-Charge..Make: Havells model: Fusion 50 or equivalent in bajaj, crompton

S&F service connection fixing or laying and passing through pipe 1100V grade heavy duty cable with PVC insulated aluminium conductor served with and inner sheathing of PVC tape and over all 6 sqmm 2 core nominal cross section in service connection

Supply and fixing of PVC conduit size 25mm Rigid non-metallic PVC conduit exclusive of boxes (junction/terminal) but inclusive of all tees, bends,elbows, reducers, bell mouth tube ends and fixing accessories including chase cutting such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing of bollard lighting New generation, energy saving, environmental friendly, long life aesthetically designed aluminium landscape luminaire for diffused lighting with high power LED as light source.including providing PCC 1:2:4 Base in round shape of dia 30cm and hight up 15cm with grouting bolt to fixing of light fitting complete all as directed by Engr-inCharge . Make Havells cate no BAMBOOBL8WLED757PSYMTOPCM or equivelent in philips/ wipro

Earthing complete with Galvanised steel earth plate electrode 600 x 600 x 6 mm buried directly in the ground vertically to depth not less than 3 Mtr below the ground level with the top edge of earth plate, depth not less than 2.25 Mtr below the ground level connected to GI earth wire 4mm dia by means of bolts, nuts and washers protected by GI tubing light grade 15 mm dia uptoTest point, 20 mm dia watering pipe with funel & wire mesh, PCC pit in PCC 1:2:4 using 20 mm stone aggregates chamber 40 mm thick RCC cover slab (1:2:4) type B-1 using 20 mm graded stone aggregates complete all as specified and shown in electrical plate No.3 of SSR Part-I including earth work in any type of soil ,removal of surplus sil and providing charcol dust & salt layers all around the earth plate upto 15 cm all as required specified & directed by engr in charge ( Note:- Up to 7.5 Mtr length of pipe of 15 mm dia and GI wire shall be deemed to be included in unit rate quoted by tenderer GI pipe and GI strip beyond 7.5) will be measured separately under respective item.

Sethi Brothers

krishna Associate