REPAIR/ PAINTING/ POLISHING OF WOODEN FURNITURE AND OTHER MISC WORK AT AF STN ADAMPUR

Amount

CHAIR EASY :- (Drawing No : FD-229)

M&L for Rail made out of Ist class hard wood (shesham) with suitable holes for caning including applying one coats of spirit polish to achieve glossy finish and minor fillings with putty as required, IN REPLACEMENT complete all as per drawing and directed.

M&L for Front legs made out of 1st class hard wood (Shesham) of size and shape and applying with one coats of spirit polish to achieve glossy finish and including minor fillings with putty as required, IN REPLACEMENT,complete all as per drawing and directed

M&L for Rear legs made out of 1st class hard wood (Shesham) of size and shape and applying one coats of spirit polish to achieve glossy finish and including minor fillings with putty as required, IN REPLACEMENT, complete all as per drawing and directed.

M&L for Seat frame made out of 1st class hard wood (Shesham) of section 75 mm x 40 mm of size 510 mm long in front and 480mm long in rear and applying one coats of spirit polish to achieve glossy finish and including minor fillings with putty as required, IN REPLACEMENT, complete all as per drawing and directed.

M&L for Back frame made out of 1st class hard wood (Shesham) of section 75 mm x 40 mm of size 510 mm long in front and 480mm long in rear and applying one coats of spirit polish to achieve glossy finish and including minor fillings with putty as required, IN REPLACEMENT, complete all as per drawing and as directed.

M&L for Arm rest of size 65 mm x 25mm x 610 mm made out of 1st class hard wood (shesham) and applying one coat of spirit polish to achieve glossy finish and including minor fillings with putty as required, IN REPLACEMENT complete all as per drawing and directed.

M&L for Preparation of wooden surface of chair easy including cleaning with sand paper and applying one coat of spirit polish to achieve glossy finish and including minor fillings with putty as required complete all as specified and directed.

M&L for Caning chairs easy with 2.5mm wide oval type plastic cane and bordering with 3mm wide plastic cane weaving as per godrej pattern, IN REPLACEMENT, complete as shown on drawing complete all as shown & directed.

CHAIR DINING OFFICER MAP :- (FD/MAP-II/04)

M&L for Chair dining cushion 75mm thick made out of 40 density foam with fabric including 12mm thick ply IN REPLACEMENT, all as shown drawing as directed. Make:- Sleepwell / Kurlon

M&L for Front legs made out of 1st class hard wood (Shesham) of size and shape and applying with one coats of spirit polish to achieve glossy finish and including minor fillings with putty as required, IN REPLACEMENT,complete all as per drawing and directed

M&L for Rear legs made out of 1st class hard wood (Shesham) of size and shape and applying one coats of spirit polish to achieve glossy finish and including minor fillings with putty as required, IN REPLACEMENT, complete all as per drawing and directed.

M&L for Stiffeners made of Ist class hard wood (shesham) of size and shape,IN REPLACEMENT, complete all as per drawing and as directed.

M&L for Back rest made out of Ist class hard wood (shesham) of size and shape and applying one coats of spirit polish to achieve glossy finish and including minor fillings with putty as required, IN REPLACEMENT, complete all as per drawing and as directed.

CHAIR DINING & CHAIR WOODEN BOTTOM :- (Drawing No : FD-228 & 279))

M&L for Rail made out of Ist class hard wood (Shesham) having suitable holes for caning, of size and shape and applying one coats of spirit polish to achieve glossy finish and including minor fillings with putty as required, IN REPLACEMENT, complete all as per dawinrg and as directed.

M&L for Front legs made out of Ist class hard wood (Shesham) of size and shape and applying one coats of spirit polish to achieve glossy finish and including minor fillings with putty as required, IN REPLACEMENT, complete all as per drawing and as directed.

M&L for Rear legs made out of Ist class hard wood (shesham) of size and shape and applying one coats of spirit polish to achieve glossy finish and including minor fillings with putty as required, IN REPLACEMENT, comlpete all as per drawing and as directed.

M&L for Stiffeners made of Ist class hard wood (shesham) of size and shape,IN REPLACEMENT, complete all as per drawing and as directed.

M&L for Back rest made out of Ist class hard wood (shesham) of size and shape and applying one coats of spirit polish to achieve glossy finish and including minor fillings with putty as required, IN REPLACEMENT, complete all as per drawing and as directed.

M&L for Preparation of wooden surface of chair dining including cleaning with sand paper and applying one coats of spirit polish to achieve glossy finish and including minor fillings with putty as required complete all as directed.

M&L for Canning for chairs Dining with 2 mm type plastic cane and bordering with 3mm wide plastic cane weaving as per godrej pattern, IN REPLACEMENT, complete as shown on drawing & directed.

CHAIR WRITING :- (Drawing No : FD-250 & 280)

M&L for Rail made out of 2nd class hard wood with suitable holes for caning as per drg IN REPLACEMENT, complete.

M&L for Front legs made of 2nd class hard wood as per drg, IN REPLACEMENT, complete.

M&L for Rear legs made of 2nd class hard wood as per drg, IN REPLACEMENT, complete.

M&L for Stiffeners made of 2nd class hard wood as per drg, IN REPLACEMENT, complete.

M&L for Arm rest made out of 2nd class hard wood as per drg, IN REPLACEMENT, complete.

Back rest made of 2nd class hard wood as per drg IN REPLACEMENT, complete.

M&L for Preparation of wooden surface of chair writing including cleaning with sand paper and applying one coats of spirit polish to achieve glossy finish and including minor fillings with putty as required complete all as directed by Engg-in-Charge.

M&L for Canning for chairs writing with 2 mm type plastic cane and bordering with 3mm wide plastic cane weaving as per godrej pattern, IN REPLACEMENT, complete as shown on drawing complete all as shown & directed.

BED PLYWOOD TOP :- (Drawing No : FD-246)

M&L for Long rails of bed plywood top made out of 1st Class hard wood (shesham) of size and shape and applying one coats of spirit polish to achieve glossy finish and including minor fillings with putty as required, IN REPLACEMENT, complete all as shown on drawing and directed.

M&L for Removing worn out ply wood from head rest board and providing 4 mm thick 3 ply one side teak face ply wood ISI Marked, BWR of size 780 x 340 mm on both side of head rest and applying one coats of spirit polish to achieve glossy finish and including minor fillings with putty as required complete all as per drawing and directed.

M&L for Removing worn out ply wood from foot rest board and providing 4 mm thick 3 ply one side teak face ply wood ISI Marked, BWR of size 780 x 180 mm on both side of head rest and applying one coats of spirit polish to achieve glossy finish and including minor fillings with putty as required complete all as per drawing and as directed.

M&L for Plywood top 12 mm thick, 7 ply type BB commercial BWR confirming to IS: 303 fixed on frame, IN REPLACEMENT, complete all as shown on drawing and directed.

M&L for Bottom rails of bed ply wood top made out of Ist Class hard wood (Shesham wood) of required shape and size and applying one coat of spirit polish to achieve glossy finish and including minor fillings with putty as required, IN REPLACEMENT, complete all as shown on drawing and directed.

M&L for Legs of head board made out of 2nd Class hard wood (Shesham) of required shape and size including applying one coats of spirit polish to achieve glossy finish and minor fillings with putty as required, IN REPLACEMENT, complete all as shown on drawing and specified.

M&L for Legs of foot board made out of Ist Class hard wood of required shape and size and including applying one coats of spirit polish to achieve glossy finish and minor fillings with putty as required, IN REPLACEMENT, complete all as shown on drawing and specified.

M&L for Corner made out of 2nd class hard wood to strengthening long rails & legs and including applying one coats of spirit polish to achieve glossy finish and minor fillings with putty as required, IN REPLACEMENT, complete all as directed.

M&L for Preparation of wooden surface of bed plywood top including cleaning with sand paper and including applying one coat of spirit polish to achieve glossy finish and minor fillings with putty as required complete all as directed.

TEAPOY WOODEN :- (Drawing No : FD-278)

M&L for Top 18/19mm thick medium density fibre board of size 600mm x 450mm with 4mm thick teak wood edging all round, IN REPLACEMENT, complete all as per drawing and directed.

M&L for Legs made out of Ist class Class hard wood (Shesham) of required shape and size including applying one coats of spirit polish to achieve glossy finish and minor fillings with putty as required, IN REPLACEMENT, complete all as shown on drawing and specified.

M&L for Preparation of wooden surface of teapoy including cleaning with sand paper and applying raw sienna/ burnt sienna and applying two coats of french polish to required finish and minor fillings with putty as required complete all as directed.

TABLE CENTRE :- (Drawing No : FD-274)

M&L for Top 18/19mm thick medium density fibre board with 4mm thick teak wood edging all round IN REPLACEMENT, as directed.

M&L for Legs made out of Ist class Class hard wood (Shesham) of required shape and size including applying one coats of spirit polish to achieve glossy finish and minor fillings with putty as required, IN REPLACEMENT, complete all as shown on drawing and directed.

M&L for Side rail made out of Ist class hard wood (shesham), IN REPLACEMENT, complete all as per drawing and directed.

M&L for Top short rail made out of Ist class hard wood (shesham), IN REPLACEMENT, complete all as per drawing and directed.

TABLE WRITING :- (Drawing No : FD-275)

M&L for Legs made out of Ist class Class hard wood (Shesham) of required shape and size including applying one coats of spirit polish to achieve glossy finish and minor fillings with putty as required, IN REPLACEMENT, complete all as shown on drawing and directed.

M&L for Front rail made out of Ist class hard wood (shesham), IN REPLACEMENT, complete all as per drawing and directed.

M&L for Side rail made out of Ist class hard wood (shesham), IN REPLACEMENT, complete all as per drawing and directed.

M&L for Top 18/19mm thick medium density fibre board with 4mm thick teak wood edging all round, IN REPLACEMENT, complete all as per drawing and directed.

TABLE DRESSING LADIES :- (Drawing No : FD/MAP/II/07)

M&L for Frame made out of Ist class Class hard wood (Shesham), with mirror & ply of size 1200mm x 385mm x 5mm, IN REPLACEMENT, complete all as shown on drawing and specified.

M&L for Table Frame made of 18/19mm thick medium density fibre board of size 650x300mm with 4mm thick teak wood edging all round, IN REPLACEMENT, complete all as per drawing and directed..

M&L for drawer made of 18/19mm thick medium density fibre board of size 450x 130mm with 4mm thick teak wood edging all round, IN REPLACEMENT, complete all as per drawing and directed..

M&L for TABLE DRESSING GENTS (Drawing No : FD/MAP/E6/16) :- Frame made out of Ist class Class hard wood (Shesham), with mirror & ply of size 900mm x 300mm x 5mm, IN REPLACEMENT, complete all as shown on drawing and specified.

M&L for TABLE BED SIDE (Drawing No : FD/E6/MAP/15 (R) :- Drawer made out of Ist class Class hard wood (Shesham), IN REPLACEMENT, complete all as shown on drawing and specified.

M&L for TABLE PEG (Drawing No : FD : 384):- Top 18/19mm thick medium density fibre board with 4mm thick teak wood edging all round, IN REPLACEMENT, complete all as per drawing and directed.

TABLE OFFICE CLERK :- (Drawing No : FD-84/ FD-1004)

M&L for Table top made of 18/19mm thick medium density fibre board of size 1400x 900mm with 4mm thick teak wood edging all round, IN REPLACEMENT, complete all as per drawing and directed..

M&L for front Legs made out of Ist class Class hard wood (Shesham) of required shape and size including applying one coats of spirit polish to achieve glossy finish and minor fillings with putty as required, IN REPLACEMENT, complete all as shown on drawing and specified.

M&L for drawer made out of Ist class Class hard wood (Shesham) of required shape and size including applying one coats of spirit polish to achieve glossy finish and minor fillings with putty as required, IN REPLACEMENT, complete all as shown on drawing and specified.

SIDE BOARD :- (Drawing No : FD-1112)

M&L for door made out of 18/19mm thick medium density fibre boardTW bearer fixed exactly in the centre of both side of drawe with STO aluminium shelf support, IN REPLACEMENT, complete all as per drawing and directed.

M&L for Teliscope channels as existing size and shape, IN REPLACEMENT, complete all as per drawing and directed.

M&L for Top made out of 18/19mm thick medium density fibre board of size 1200x 600mm with 4mm thick teak wood edging all round, IN REPLACEMENT, complete all as per drawing and directed.

M&L for Back made out of 18/19mm thick medium density fibre board of size 1200x 900mm with 4mm thick teak wood edging all round, IN REPLACEMENT, complete all as per drawing and directed.

M&L for drawer made out of 18/19mm thick medium density fibre board of size 450x 130mm with 4mm thick teak wood edging all round, IN REPLACEMENT, complete all as per drawing and directed

M&L for Legs made out of Ist class Class hard wood (Shesham) of required shape and size including applying one coats of spirit polish to achieve glossy finish and minor fillings with putty as required, IN REPLACEMENT, complete all as shown on drawing and specified.

M&L for TABLE DINNING FOR 6 PERSON (Drawing No-FD-273) :- 18/19mm thick Pre-laminated particle board of size 1500mm x 900mm, with 3mm thick teak wood edging all round, IN REPLACEMENT, complete all as shown on drawing and specified.

M&L for Top of table 18/19mm thick Pre-laminated particle board of size 900mm x 600mm, with 3mm thick teak wood edging all round, IN REPLACEMENT, complete all as directed by Engg-in-Charge.

M&L for Top of table 18/19mm thick Pre-laminated particle board of size 900mm x 900mm, with 3mm thick teak wood edging all round, IN REPLACEMENT, complete all as directed by Engg-in-Charge.

M&L for HAT STAND (Drawing No-FD-362):- 18/19mm thick Pre-laminated particle board with mirror, IN REPLACEMENT, complete all as shown on drawing and specified.

LOCKER BED SIDE WOODEN :- (Drawing No : FD-222)

M&L for Top 18/19mm thick medium density fibre board of size 900x600mm with 4mm thick teak wood edging all round, IN REPLACEMENT, complete all as per drawing and directed.

M&L for Plywood 8 mm thick, size 900x 1200mm type BB commercial BWR confirming to IS: 303 fixed on frame, IN REPLACEMENT, complete all as shown on drawing and directed.

M&L for shuitters of 18/19mm thick Pre-laminated particle board, one side teak faced covered and other side plan, with 4mm thick teak wood edging all round including piano type hinges 18mm wide leaf with screw, hasp staple 75mm long and aluminium handle 75mm long, after necessary minor repair , IN REPLACEMENT, complete all as directed by Engg-in-Charge.

M&L for Preparation of wooden surface of Locker bed side including cleaning with sand paper and applying raw sienna/ burnt sienna and applying two coats of french polish to required finish and minor fillings with putty as required complete all as directed.

TV TROLLY :- (Drawing No : FD/E6/MAP/04 (R)

M&L for Pull out drawers with two telescopic channel, IN REPLACEMENT, complete all as per drawing and directed.

M&L for Top 18 mm thick prelaminated particle board of size 750mm x 600mm, IN REPLACEMENT, complete all as per drawing and directed.

M&L for Swivel type castors set of four, IN REPLACEMENT, complete all as per drawing and directed.

M&L for Front shutter 5.5mm thick glass with magnetic catcher, IN REPLACEMENT, complete all as per drawing and directed.

SOFA SET 5 SEATER :- (Drawing No : FD- 281)

M&L for Cushion foam 21" x 22" x 4" , 32 density duly covered with tapesty cloth not less than Rs. 300.00/- per meter duly stiched with fine standard thread and providing best quality chain with rubber on one side complete IN REPLACEMENT, all as shown drawing as directed. Make:- Sleepwell / Kurlon

M&L for Preparation of wooden surface of sofa set five seater including cleaning with sand paper and applying one coat of spirit polish to achieve glossy finish and including minor fillings with putty as required complete all as directed by Engr-in-Charge.

SOFA SET 5 SEATER :- (Drawing No : Trade Pattern)

M&L for Cushion foam of 32/40 density duly covered with tapesty cloth not less than Rs. 300.00/- per meter duly stiched with fine standard thread and providing best quality chain with rubber on one side complete IN REPLACEMENT, all as shown drawing as directed. Make:- Sleepwell / Kurlon

M&L for Preparation of wooden surface of sofa set five seater including cleaning with sand paper and applying one coat of spirit polish to achieve glossy finish and including minor fillings with putty as required complete all as directed by Engr-in-Charge.

M&L for Preparation of wooden surface including cleaning with sand paper and applying two coats of french polish to achieve glossy finish and including minor fillings with putty as required complete for the following items :-

BED PLYWOOD TOP (Drawing No-FD-245 & 246)

BIN SOILED LINEN (Drawing No-FD-15M7 & 244)

TABLE DINNING FOR 8 PERSON (Drawing No-FD-239)

TABLE DINNING FOR 6 PERSON (Drawing No-FD-239 & 30(M)

CHAIR CBA/ WRITING/CBB (Drawing No-FD-280)

CHAIR WOODEN BOTTOM (Drawing No-FD-56)

SIDE BOARD (Drawing No-FD-26M)

STOOL DRESSING (Drawing No-FD-252)

TABLE BED SIDE (Drawing No-FD-18 & 210)

TABLE CENTER (Drawing No-FD-29)

TABLE DRESSING GENTS (Drawing No-FD-31)

Misc repair / maintence door to door of old tables, chair, beds, partitions and easing of chairs and beds and all defective items such as knobs, handles, all type of lock and other hardware fitting and fixture, as per site requirement with and including material like screws, nails, washers, grease and all kind of machine work i.e. welding, cutting, bending, drilling & grinding. NOTE :- The work under the subject tender is to attend day to day complaints of occupant/users. Contractor should have all categories of workman to attend the same within stipulated time as directed by Engineer-in-charge. If any complaint is not attended within 6 (six) hours from the time of complaint given to contractor, penalty of Rs. 100/- for each complaint shall be made for not attending the complaint in time. Contactor or his rep with mobile number and Mail id shall liais with office of BSO at 9.00 AM and 2.00 PM i.e. two times every day to know or collect the day to day repair works/complaints.

GLOBAL ENGINEERS AND INNOVATORS (BID ID -3388736)

om parkash and sons (BID ID -3382580)

B S ENTERPRISES (BID ID -3381136)