Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.6 LAccepted-AOC SHAMSHU COMPLEX FORT ROAD LEH LADAKH 194101 | LEH | LEH | LADAKH | 194101 | L1 | Accepted-AOC being lowest bidder | |
| 2 | L2₹36.3 L+₹2.8 L (8.23%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹39.1 L+₹5.5 L (16.5%)Rejected-Finance MURSTEY COLONY PLOT NO 16 LEH 194101 LADAKH | LEH LADAKH | LADAKH | 194101 | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹40.4 L+₹6.8 L (20.4%)Rejected-Finance H NO 411 SECTOR 4 CHANNI HIMMAT JAMMU 180015 J K | JAMMU | JAMMU | J K | 180015 | L4 | Rejected-Finance OTHER THAN LOWEST | |
| 5 | L5₹40.9 L+₹7.3 L (21.7%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹37.9 L
EMD Value
₹76,000
Closing Date
10 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 865 EWS
GE 865 EWS, PIN-913 865 C/o 56 APO
PROVN OF CERTAIN LBW AND REVENUE WORK OF AGE BR I AND AGE EM I UNDER GE 865 EWS
2022_MES_545390_3
865/EWS(NIT-72)/2022-23
Open Tender
Civil Works
Item Rate
270 days
GE 865 EWS
As per tender documents and as per policy in vogue
9 documents required · 9 mandatory
₹500
GE 865 EWS
₹76,000
Yes
26 Nov 2022
18 Oct 2022
18 Nov 2022
18 Oct 2022
10 Nov 2022
26 Oct 2022
Amount
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard/ dense soil , including spreading and levelling in layers n exc 25 cm thick complete all as specified and directed by Engr-in-Charge.
Excavating in trenches, n. exc 1.5 m wide and exc 1.5 m and not exc 3.00 m in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, for laying cables/pipes, etc. n exc 10 sq m on plan in hard/dense soil and getting out soil, complete all as specified and as directed by Engineer-in-charge.
Returning filling in (soil) including spreading, levelling, watering and well ramming in layers n.exc 25cm thick in any type of soil complete all as specifed and as directed by Engineer-in-Charge.
Removal of excavated material (soil) to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specifed and as directed by Engineer-in-Charge.
M&L for Plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregates as in sub base, foundation, filling and mass concrete, complete all as specified and as directed by Engineer-in-Charge.
M&L pre-cast cement concrete(20mm graded crushed stone aggregate) 1:3:6 type C-1 as in block masonery exc 10cm in width with solid block masonery with solid blocks,exc.10cm in width and setting in cement mortar 1:6 all as Specified by Engr-in-Charge.
M&L for use & waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, well wall, sides and soffits of foundation and plinth beams and similar work: vertical or to batter complete all as specified and directed by Engr in Charge.
M&L for use & waste of formwork to sides of pllars, posts, struts, piers, columns and stanchions, Square, rectangular or polygonal for rough finished flat surface of concrete complete all as specified and as directed by Engr-in-Charge.
M&L for use & waste of formwork to rough finished concrete surfaces to sides of soffits of floor or roof beam, beam haunching, girders, bresumers, lintels, cantilever, shelves, Square, rectangular or polygonal for surface of concrete complete all as specified and as directed by Engr-in-Charge.
M&L for use & waste of form work to soffits of suspended slabs such as roof, floor slabs, landings etc not exc 200 mm thick horizondal or slopping complete all as specified and directed by Engr-in-Charge.
M&L for use & waset of form work to soffits of suspended slabs such as roof, floor slabs, landing, stair case etc notexc 200 mm thick horizontal or slopping rough finished concrete surfaces complete all as specified and directed by Engr-in-Charge.
M&L for 40 mm thick cement concrete 1:2:4 type B-0 as in damp proof course horizontal or vertical surfaces including with water proofing compound @ 200 ml per bag of cement with necessary formwork if required complete all as specified and directed by Engr-in-Charge.
M&L for RCC M-25(Design mix) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed by Engr-in-Charge.
M&L for Reinforced cement concrete M-25 (design mix) in Beams, cantilivers, bressummers, lintel over 1.5 mtr span complete all as specified and directed by Engr-in-Charge.
M&L for Reinforced cement concrete M-25 (design mix) in Columns, vertical band, pillars, piers, posts and struts complete all as specified and directed by Engr-in-Charge.
M&L RCC M-25(design mix) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and as directed by Engr-in-Charge.
S&F mild steel TMT bars of 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips , complete all as specified and directed by Engr-in-Charge.
All as per item No above here-in- before but up to and including 6 to 8 mm dia in stirrups, spacers and binders as in columns and beams etc. as specified and directed by Engr-in-Charge.
M&L for hard core of broken stone or boulders of gauge n.exc 63 mm deposited, spread and level in layers n. exc. 15 cm thick watered and rammed to true surface complete all as specified and directed by Engr-in-Charge.
M&L for 75mm thick PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection and finished concrete surface even and smooth without using extra cement including making proper joints with bitumen mastic with sand as per specification at an interval of 3m and change of direction complete all as specified and as directed by Engr-in-Charge.
M&L forming contraction (Dummy) joints 50 mm deep x 10mm wide for plinth protection & similar work , filled with sealing compound Grade 'A' in plinth protection complete all as specified and directed by Engr-in-Charge.
M&L for 100 mm PCC 1:3:6 type C-1 using 20mm graded crushed stone aggregate as in sub base of floor all as specified by Engr-in-Charge.
M&L for 25mm thick PCC 1:2:4, type B-1 using 20mm graded crushed stone aggregate as in sub base/ levelling course for laying of screed bed complete all as specified by Engr-in-Charge.
M & L for joint free Non-Skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed or bedding layer in Cement Mortar 1:6 for laying floor finishes complete all as specified and directed by Engr-in-Charge. MAKE: KAJARIA/H&R JOHNSON/CERA/ NITCO/SOMANY
M&L for (350mmx250mmx7mm/450mmx350mmx 7mm thick) coloured glazed ceramic tiles set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments.(Note: Any disturbed surfaces shall be matched w/o any extra cost to the govt) incl 10mm thckbacking coat for dado/skirting CM 1:4 complete all as specified and directed by Engr-in-Charge. MAKE: KAJARIA/H&R JOHNSON/CERA/ NITCO/SOMANY
M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillers, window cills, cooking plateforms and like in cement mortar (1:4) including pointing in white cement 1:2) using marble dust with admixture of pigment to match with the shade of granite over 15 mm thicm screed bed in CM 1:4, including rounding and moulding wherever required edges of granite as directed complete all as specified and directed by Engr-in-Charge.
S&F for powder coated aluminium, anodized, barrel tower bolts, ISI Marked, of extruded section 150 mm long, complete all as specified and directed by Engr-in-Charge.
S&F for powder coated aluminium anodized, barrel tower bolts, ISI Marked, of extruded section 100 mm long, complete all as specified and directed by Engr-in-Charge.
M&L for rendering 15mm thick rendering in cement mortar 1:6 on fair faces of brick walls or on concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge.
M&L for rendering 15mm thick rendering in cement mortar 1:4 other than fair faces of brick walls or on concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge.
M&L for 5mm thick rendering on fair faces of concrete surface of ceilings finished even and smooth without using extra cement in cement mortar 1: 3 complete all as specified and as directed by Engr-in-Charge.
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engr-in-Charge.
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) door shutters, aluminium section weighing not less than 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, powder coated aluminium fittings such as handles - 02 Nos, hinges - 03 Nos, sliding bolt - 01 Nos, tower bolt - 02 Nos in each door, powder coated aluminium snap beading, screws etc complete all as specified and directed by Engr-in-Charge
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing not less than 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long - 01 Nos, telescopic hinges 100mm long - 02 Nos, suitable handle - 01 Nos etc in each shutter complete all as specified and directed.
S&F sheet glass 4.80mm thick reflective or frosted glass in square or rectangle in size not exc 0.5 sqm in each pane fixed with aluminium sections complete all as specified and directed by Engrin-Charge.
M&L for Preparation new plastered surfaces of walls and applying two coats of cement base paints of any shade on walls (shade as approved by users) including curing before and after applying each coat complete all as specified and directed by Engineer-in-Charge. MAKE: SNOWCEM / ASIAN / JEHNSON & NICHOLSON / BERGER / DURACEM
Material and labour for preparation of new plastered/concrete surfaces of wall and applying 3 mm thick JK / Birla wall putty in two layer as per manufactures instructions, surfaces to be finished even and smooth over a coat of alkali resisstane primer and applying two coats of oil emulsion distember first quality of approved colour complete all as specified and directed by Engr-in-Charge.
S&F in 19mm dia mild steel, chromium plated curtain rods, with brackets, end bulbs complete all as specified and directed by Engr-in-Charge.
Rotational moulded polyethylene water storage tank, inner and out white, two layers, ISI marked (cylinderical vertical with closed top) hoisted with threaded cap and fixed in position all as specified in SSR Part-I of Capacity 1000 litres each including all accessories (i.e GI nipples, etc), including provn of 20/15mm dia spout for connecting inlet, outlet, overflow and washout pipes, complete all as specified and as directed by Engr-in-Charge.
S & F 20 mm dia 3 layer PP-R polypropyene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded with polypropylene random fittings fixed, complete all as per manufacture instructions and as directed by Engineer in Charge.
S & F 25 mm dia 3 layer PP-R polypropyene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded with polypropylene random fittings fixed, complete all as per manufacture instructions and as directed by Engineer in Charge.
S&F PVC connections 15 mm size with PTMT nuts of length 450 mm, long complete all as specified and diected by Engr-in-Charge. Make: Prayag/Polytuf/Supreme
M&L for 110 mm bore, PVC (SWR) pipes, pressure rating 4 kg/sqcm, single or double socketed, in any length with rubber ring joints, fixed to walls, laid in trenches or in floors complete all as specified and as directed by Engr-in- Charge. MAKE: SUPREME/ASHIRWAD/FINOLEX/ SFMC/ASTRAL
S&F PVC (SWR) bents 110 mm bore complete all as specified and directed by Engr-in-Charge.
S&F PVC (SWR) branch piece, single 'Y' equal or unequal of 110 mm bore with ovel acess doors complete all as specified and directed by Engr-in-Charge.
S&F in repair PP-R 25 mm bore Gate valve (with brass ferrule as per site reqirement antimicrobial fusion welded having thermal stability for hot & cold water supply . complete all as specified and directed by Engr-in-Charge. Make : JINDAL/KISAN/SFMC/Supreme/Kanha Plastic Pvt Ltd
S&F PVC (SWR) vent cowl 110 mm bore complete all as specified and directed by Engr-in-Charge.
S&F in grating doom 100 mm dia of CP (minimum weight 60 gram) complete all as specified and directed by Engr-in-Charge.
S&F One piece vitreous china wash down water closer pedestal pattern in size of 710x390x790 mm white with duroplast soft close seat cover and twin flush fittings, toilet paper holder, health faucet, PVC connection, CP Angle valve (2 Nos) etc complete all as specified and directed by Engr-in-Charge. Make : Cera Cat part No CRUISER S1013137 S Trap 300 mm or equivalant model of make specified in PS.
S&F Vitreous china counter top wash hand basin make : Cera, Model: Colga 500 x 420 x 160mm Semi-recessed Wash Basin White - S2030132, Single Lever Basin Mixer with 12inch Extended Body-F1013452, chromimum plated brass coupling, Chromium plated brass bottle trap, 600 mm braided connection - 02 Nos and Chromimum plated brass Angle valve - 2 Nos complete all as specified and directed by Engr-in-Charge. Note : Make of Items to be equivalant make specified in PS.
S&F Vitreous china urinal Make : cera Model : Cicily 320 x 300 x 525 mm Lidless Urinal with Integrated EFS Snow White S4010102, including sensor with auto flushing complete set, urinal coupling, braided connection and discharge pipe complete all as specified and directed by Engr-in-Charge. Note : Make of item to be equivalant make specified in PS.
S&F Stainless steel Butt hinges, medium weight 100 mm size complete all as specified and directed by Engr-in-Charge.
S&F Stainless steel Butt hinges, medium weight 75 mm size complete all as specified and directed by Engr-in-Charge.
S&F Wall Hung Basin with Full Pedestal pattern, Make: Jaquar Model: Continental Series Code :CNS-WHT-801 + CNS-WHT-301 With Fixing Accessories, Size: 560x415x200 mm complete all as specified and directed by Engr-in-Charge. Note : Make of item to be equivalant make specified in PS.
S&F Hand Shower (Health Faucet) Make : Jaquar, Range :Allied Code :ALD-CHR-587 (ABS Body) with 8mm Dia, 1.5 Meter Long Spirochrome flex tube & Wall Hook complete all as specified and directed by Engr-in-Charge. Note : Make of item to be equivalent make specified in PS.
S&F Towel rail 600 mm long Make: Cera, Model : Ormond F5003103 Aluminium chromimum plated (Silver) fixed to wall with stainless screws with fisher complete all as specified and directed by Engr-in-Charge. Note : Make of item to be equivalent make specified in PS.
S&F chromimum plated brass soap dish ovel shape fixed to wall with stainless screws size not less than 125 mm long complete all as specified and directed by Engr-in-Charge. Make as per PS.
S&F sheet glass shelf assembly consisting of 5.5 mm thick 120 mm wide with chromimum plated brass bracket guard and railing 600 mm long complete all as specified and directed by Engr-in-Charge. Make as per PS.
S&F central hole wash hand basin mixer without popup waste system with 450 mm long braided hoses -02 Nos Make : Jaquar, Model: QQP-CHR-7167BPM complete all as specified and directed by Engr-in-Charge. Note: Make of item to be equivalent make specified in PS.
S&F two way angle cock brass chromimum plated with long shunk cast copper alloy, high pressure with fancy handle, secrewd the end to iron pipes or brass ferrule for the bore of pipes 15 mm complete all as specified and directed by Engr-in-Charge. Make : cera Model :Garnet Quarter- F200211 or equivalant make specified in PS.
S&F 15 mm bore two way Bip tap long body with wall flange fancy type chromimum plated brass screwed for iron pipe with capstain head complete all as specified and directed by Engr-in-Charge. Make: Cera Cat part No. F200211 or equivalent make specified in PS.
S&F Chromimum plated brass paper holder complete fixed to wall with stainless screws and fisher complete all as specified and directed by Engr-in-Charge. Make : Cera cat part No. F5004110 or equivalent make specified in PS.
S&F 75 mm PVC Nahani trap, setting and jointing with solvent cement and fixed in cement concrete type B1 1:2:4 complete all as specified and directed by Engr-in-Charge. Make as per PS.
S&F Armstrong RH99 Fine Fissured is a medium absorption acoustic ceiling panel for suspended ceiling grid which combines a high level of acoustic absorption in size of 600x600x15 mm thick fixed with dash through fastner bolt of approved quality 04 Nos for per sqm including necessary cutting securing and making good complete all as specified and directed by Engr-in-Charge. Make : Armstrong or equivalant make specified in PS.
S&F Soap dispensor with glass bottle complete all as specified and directed by Engr-in-Charge. Make : Jaquar Cat part No CAN-1135N or equivalent make specified in PS.
S&F Electric automatic hand dryer white colour suitable for toilet complete all as specified and directed by Engr-in-Charge. Make Jqurar/Cera or equivalent make specified in PS.
Excavating over areas, n exc 1.5 m deep and getting out hard/dense soil complete all as specified and directed by Engr-in-Charge.
Excavating over areas, exc 1.5 m but not exc 3.00 m deep and getting out hard/dense soil complete all as specified and directed by Engr-in-Charge.
M&L for Walling of random rubble, uncoursed stone masonary, well bonded, laid dry in retaining wall, abutment and similar work built in cement mortar 1.:6 complete all specified and as directed by Engr-in-Charge.
M&L for providing precast reinforced cement concrete type A1, 1:1.5:3 using 20mm graded aggregate as in landings, cover slabs (for man holes etc) and similar articles with plain faces and setting in cement mortar 1:6 complete with joints to match including use of necessary formwork all as specified and directed. Note : S&F reinforcement shall be measured and paid separately.
M&L broken stone for loose filling of guage 80mm to 150 mm graded for soak wells complete all as specified and directed by Engr-in-Charge.
M&L Machine cut pre polished Kota stone slab flooring 20-25 mm thick over 20mm thick cement screed bed or bedding layer in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed by Engr-in-Charge.
M&L Machine cut pre polished Kota stone slab as in skirting/dado, 20-25 mm thick over 20mm thick cement screed bed or bedding layer in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed by Engr-in-Charge.
M&L for 2nd class hard wood as in plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed by Engr-in-charge.
S&F Factory made 35mm thick IInd Class Hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats, complete all as specified and directed by Engineer-in-Charge. MAKE: M/S WOOD PRODUCT INDORE/M/S GOYAL INDUTRIES CORPORATION 8743 DESH BANDHU GUPTA ROAD NEW DELHI/ M/S JAIN WOOD INDUSTRIES MURTHAL SONIPAT/M/S PIONEER TIMBER PRODUCT CHANDIGARH/M/S SHIV JOINERY& FURNITURE INDUSTRIES JAMMU/M/S M.S JOINERY WORKS, PARIMPORA, SRINAGAR
M&L for Mild Steel Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed by Engr-in-Charge.
M&L for PCC 1:3:6 type C-1 using 20 mm graded crushed stone aggregate, as in hold fast, bed blocks and the like complete all as specified and as directed by Engr-in-Charge.
S&F for Aluminum, anodized, barrel tower bolts, ISI Marked, of extruded section 150 mm long, complete all as specified and directed by Engr-in-Charge.
S&F for Aluminum, anodized, barrel tower bolts, ISI Marked, of extruded section 100 mm long, complete all as specified and directed by Engr-in-Charge.
S&F for Butt hinges, medium weight, cold rolled mild steel and fixed with screws to wooden frames or with welding to existing MS frames,100 mm size, ISI marked, complete all as specified and directed by Engineer-in- Charge.
S&F for Butt hinges, medium weight, cold rolled mild steel and fixed with screws to wooden frames or with welding to existing MS frames,75 mm size, ISI marked, complete all as specified and directed by Engineer-in- Charge.
S&F for 300mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy fixed complete all as specified and as directed by Engr-in-Charge.
S&F 150mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed by Engr-in-Charge.
S&F 100mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed by Engr-in-Charge.
S&F 30 mm thick IInd class hard wood Glazed and skelton shutter, open rebated and prepared to receive the glass, guaze etc without sash bars edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc complete all as specified and directed by Engr-in-Charge.
S&F Plain Sheet sheet glass 4.00 mm thick, ordinary quality and glazing with oil pane putty in squares not exceeding 0.5 Sq. mm in each pane, or beading of wooden/aluminium complete, complete all as specified and as directed by Engr-in-Charge.
M&L for mild steel confirming to Fe 290 Gde E-165, hand rails, half round or other steel section or core for wooden hand rail straight portion, window grill, drilld and counter sunk or balusters running bars for doors, including embedded in concrete and screwing etc wind ties for roof including securing bolts, posts and struts in fencing complete all as specified and directed by Engr-in-Charge.
M&L for Preparation of new or previously untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coat of pink primer complete all as specified and directed by Engineer-in-Charge.MAKE: NEROLAC PAINTS/ JENSON & NICHOLSON/BERGER PAINTS/ICI DULUXE/ASIAN PAINTS
M&L for Preparation of newly plastered surfaces of walls and applying two coats of distempering with oil bound distemper white or any tinted on walls, filling gaps by putty after washing rubbing down and stopping of distermpered surfaces, over a coat of primer complete all as specified and directed by Engr-in-charge. MAKE: NEROLAC PAINTS / JEHNSON & NICHOLSON / BERGER PAINTS / ICI DULUXE / ASIAN PAINTS
M&L for three coat of white wash on newly plastered surfaces ceiling including preparation complete all as specified and directed by Engr-in-charge.
M&L for 75 mm PCC 1:3:6 type C-1 using 40mm graded crushed stone aggregate as in sub base of floor all as specified by Engr-in-Charge.
M&L for Chequred cement concrete tiles PU coated glossy finished in size of 30cm X 30cm X 20mm thick, set ,pointed & jointed in neat cement slurry in floors polished with grey cement & pigments .Layed over 20mm thick cement screed base (1:4) and all as directed by Engr-in -Charge. Make as per PS.
M&L for 10 mm thick Double charged/Ultra charged vitrified tiles light shade as in floors in size of 600x600 mm set and jointed with neat cement slurry and pointed with coloured cement and incl 15 mm thick screed bed or bedding layer of cement mortar 1:4 to match the shade, pattern, laying etc of tiles complete all as specified and directed by Engr-in-Charge. Make as per PS.
M&L for 18/19mm thick prelaminated particle board, medium interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, complete all as specified and as directed by Engr-in-Charge. MAKE: NOVA PAN/GREEN PLY BHUTAN BOARD/MYSORE WOOD BOARD/CENTURY PLYWOOD
S&F 6 mm thick teak wood lipping to 18/19 mm particle board complete all as specified and directred by Engr-in-Charge.
S&F contineous piano hinges mild steel bright finish or electro galvanised width of flap 30 mm when open complete all as specified and directed by Engr-in-Charge.
S&F 100 mm Brass handles, cast type, polished bright complete all as specified and directed by Engr-in-Charge
S&F powder coated 6 mm thick aluminium deco grill suitable for windows/ ventilators fixed with aluminium powder coated 'U' channel allaround and weight of grills not less than 2.5 Kg/Sqm, design as approved by GE complete all as specified and directed by Engr-in-Charge.
M&L for second class soft wood clean swan as in battens for grids of ceiling and lining, plain fillets exc 13 sqcm and n.exc 25 sqcm, square/ rectangular in section, secured with nails or brads to timber frame work , rails, posts, rafters, purlins, grids for ceiling & wall panelling etc under 40 Sq.cm in section complete all as directed by Engr-in-Charge.
M&L for 9mm thick prelaminated particle board, medium interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, as in walls complete all as specified and as directed by Engr-in-Charge. MAKE: NOVA PAN/GREEN PLY BHUTAN BOARD/MYSORE WOOD BOARD/CENTURY PLYWOOD
M&L for 9mm thick prelaminated particle board, medium interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, as in ceiling complete all as specified and as directed by Engr-in-Charge. MAKE: NOVA PAN/GREEN PLY BHUTAN BOARD/MYSORE WOOD BOARD/CENTURY PLYWOOD
M&L for second class soft wood clean swan as in beading for edges of ceiling, lining, wooden flooring work, plain fillets exc 6 sqcm and n.exc 13 sqcm, square/ rectangular in section , secured with nails or screws to timber frame work complete all as specified and directed by Engr-in-Charge.
M&L for point wiring for one light point or fan point controlled by one light/exhaust fan controlled by one way switch with PVC insulated copper conductor stranded cable of size 1.5 sqmm and including PVC casing/caping terminated in existing sunk CI/pressed steel terminal boxes for fixing and 1.5 sqmm PVC insulated copper wire as earth wire connected to earth wire connected to earth lead and 3.0mm thick plastic laminated sheet cover all as specified and directed by Engr-in-Charge.
All as per item No 104.00 here-in-before but 1.5 Sqmm for one 3 pin 6 amps socket outlet including 1.5 sqmm insulated copper wire as earth wire to the same earth dolly on the same board complete all as specified and directed by Engr-in-Charge.
All as per item No 104.00 here-in-before but 1.5 Sqmm for one 3 pin 6 amps socket outlet including 1.5 sqmm insulated copper wire as earth wire to the same earth dolly on the independent board complete all as specified and directed by Engr-in-Charge.
M&L for point wiring for one light point or fan point controlled by one light/exhaust fan controlled by one way switch with PVC insulated copper conductor stranded cable of size 4 sqmm and including PVC casing/caping terminated in existing sunk CI/pressed steel terminal boxes for fixing and 4 sqmm PVC insulated copper wire as earth wire connected to earth wire connected to earthlead and 3.0mm thick plastic laminated sheet cover all as specified and directed by Engr-in-Charge.
M&L for lamp holder PVC/Poly corbonate type insulated body with back plate suitable for batten fittings as specified and directed by Engr-in-Charge.
S&F for modular switch 1 way 6 Amps 230 volt,1 module complete all as specified and directed by Engr-in-Charge.
S&F for Switch piano flush button single pole 6 Amps 230 volt one way complete all as specified and directed by Engr-in-Charge.
S&F for modular switch socket combination outlet 5 pin 6 Amps flush type 230 volt complete all as specified and directed by Engr-in-Charge.
S&F for Switch socket combination outlet 5 pin 6 Amps flush type 230 volt complete all as specified and directed by Engr-in-Charge.
S&F for Switch socket combination outlet multi purpose 5 pin 6 Amps and 16Amps flush type 230 volt complete all as specified and directed by Engr-in-Charge.
S&F for modular switch socket combination outlet 5 pin 6 Amps and 16 Amps, flush type 230 volt complete all as specified and directed by Engr-in-Charge.
S&F for modular white cover plate with frame of 03 module suitable for 5 pin 6 Amps and 16 Amps 230 volt complete all as specified and directed by Engr-in-Charge.
S&F for modular white cover plate with frame of 06 module suitable for 5 pin 6 Amps and 16 Amps 230 volt complete all as specified and directed by Engr-in-Charge.
S&F for modular metal flush box 03 module suitable for 5 pin 6 Amps and 16 Amps230 volt complete all as specified and directed by Engr-in-Charge.
S&F for modular metal flush box 06 module suitable for 5 pin 6 Amps and 16 Amps230 volt complete all as specified and directed by Engr-in-Charge.
S&F for celing rose, surface backlite three terminals complete all as specified and directed by Engr-in-Charge.
Supply and fixing MCB distribution board Double door, regal grey, sheet metal enclosure, SPN 240 volts 4 way with 200 amps rated bus bar concealed to wall and making flush with wall surfaces and making good to disturbed surfaces of walls to match with the exisiting surface etc . Make: As per PS.
Supply and fixing MCB distribution board Double door, regal grey, sheet metal enclosure, SPN 240 volts 8 way with 200 amps rated bus bar concealed to wall and making flush with wall surfaces and making good to disturbed surfaces of walls to match with the exisiting surface etc . Make: As per PS.
Supply and fixing MCB SPN 40-63 Amps, 'C' series, 240 V A/C complete all as specified and as directed by Engineer-in-Charge. Make: As per PS.
Supply and fixing MCB SPN 6 to 32 Amps, 'C' series, 230 V A/C complete all as specified and as directed by Engineer-in-Charge. Make: As per PS.
S&F for LED lights fitting, 1x16 watt, 220 volts, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-''charge Make : As per PS.
S&F for LED light fittings 1x20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-Charge. Make : As per PS.
S&F for LED light fitting mirror type with high output diffuser 2 feet, 10 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-Charge. Make : As per PS
S&F for LED bulk head light fitting 1x10 watt 230 volt attractive wall/ceiling mounted any type with white reflector complete with all accessories pre-wired and including connecting up with 3 core twisted flexible copper conductor cable complete all as specified and directed by Engr-in-Charge. Make : As per PS.
S&F LED street light, 60 Watts, 220 V AC out door type with high pressure die case aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete IP 65/66 protection complete all as specified and directed by Engr-in-Charge. Make : As per PS
S&F LED street light, 35 Watts, 230 V AC out door type with high pressure die case aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete IP 65/66 protection complete all as specified and directed by Engr-in-Charge. Make : As per PS
S&F for LED luminaire 600mm x 600mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge. Make : As per PS.
S&F in Air circulator PVC body, AC single phase 230 volts of size 250 mm sweep with blades and frame and louvers complete all as specified and as directed by Engr-in-Charge. Make : As per PS.
S&F 1100 V grade heavy duty cable PVC insulated aluminium conductor served with inner sheathing of pvc tape and over all pvc sheathed in service connection suspended by insulating hangers not more than 1 mtr apart including 4 mm suspension wire one twin core cable flat of stranded multistrand conductor size 10 sqmm 2 core complete all as specified and directed by Engr-in-Charge
Material and labour for earthing complete with galvanised steel earth plate 600 x 600 x 6 mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below ground level connected to and including GI wire of size 4 mm dia by means of nuts, bolts, washers etc made of and connected to test point and earth dolly as all shown in electrical plate No.3 of SSR Part-I 2009 and specified or indicated including excavation and earth work in any type of soil PCC (1:3:6) type C1 in chamber, pre cast RCC slab 50mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric or XPM jali (weight not less than 4.0 kg/Sqm) with cast iron frame, funnel, with wire mesh, 20mm bore medium grade GI watering pipe, lugs, 15mm bore light grade GI protection pipe, test point, etc, incluidng taking down of old u/s earthing set complete all as specified and as directed. Note: (i) Item includes the cost of 7.5 m GI pipe for protection of earth lead. Any additional length shall be adjusted through deviation order. (ii) Item includes the cost of 7.5 m GI earth lead. Any additional in length shall be adjusted through deviation order ( For Main DBs ) (iii) Item includes the cost of Charcoal and commercial salt ( For Main DBs )
Material and labour for earthing complete with galvanised steel earth plate 600 x 600 x 6 mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 meter below ground level connected to and including GI strip 25x4 mm as earthing leads by means of nuts, bolts, washers etc made of and connected to test point and earth dolly as all shown in electrical plate No.3 of SSR Part-I 2009 and specified or indicated including excavation and earth work in any type of soil PCC (1:3:6) type C1 in chamber, pre cast RCC slab 50mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric or XPM jali (weight not less than 4.0 kg/Sqm) with cast iron frame, funnel, with wire mesh, 20mm bore light grade GI watering pipe, lugs, 15mm bore light grade GI protection pipe, test point etc including taking out of old u/s earthing set, complete all as specified and as directed. Note: (i) Item includes the cost of 7.5 m GI pipe for protection of earth lead. Any additional length shall be adjusted through deviation order. (ii) Item includes the cost of 7.5 m GI earth lead. Any additional in length shall be adjusted through deviation order (iii) Item includes the cost of Charcoal and commercial salt
Removing and Relocating serviceable LT panels by taking down from the foundation, disconnecting all electrical connection and connecting and refixing the same at a distance of 5 to 10 mtr including reconnecting of all LT cables, including foundation for fixing of legs complete all as specified and directed by Engr-in-Charge.
Sub main wiring with two run of 6.00 Sqmm (2x6 sqmm) single core FRLS PVC insulated unsheathed multistranded copper conductor confirming to IS-694 drawn through and including non-metalic PVC casing caping ISI marked with all accessories etc with one run of 6.00 Sqmm (1x6sqmm) single core FRLS PVC insulated unsheathed copper conductor cable as earth wire and making good to match with existing surfaces complete all as specified and directed by Engineer-in-Charge. Note:- 2 runs of 6 Sqmm (2x6sqmm), one run of 6 Sqmm (1x6 sqmm) cable and one metre of PVC casing caping will be measured as one unit. Make of cable: L&T/FINOLEX/GRANDPLAY/ANCHOR/ POLYCAB
Supply and Laying, jointing and testing in replacement PVC insulated armored heavy duty electric cable with aluminum conductor, 1100 volt grade, cross sectional area 16 Sqmm, 2 Core, confirng to IS- 1554 laid in ducts/through pipes/in floor/on poles/in trenches compelte all as specified and directed by Engr-in-Charge. Make :- As per PS
Supply and spreading for sand cusioning to protection of underground electric cable, laid 8 cm before laying and 15 cm after laying of cables and punned to form an overall layer 18 cm thick complete all as specified by Engr-in-Charge.
Supply and laying of facetory made, machine pressed, Un-reinforced, precast concrete cable cover class- LV, type- I flat size 250 mm x 180 mm x 40 mm complete all as specified and directed by Engr-in-Charge.
Supply and fixing of Galvanised iron tubing light grade 40 mm bore, with all fittings, laid in trenches or under road crossing as protection of cable, or fixed along with wall/pole with clamps incuidng nut and bolts, washers complete all as specified and directed by Engr-in-Charge.
S&f for Fire Alarm sounders/sirens electronic type horizontal single stage contineous normal operation for at lease 50 minutes with sound level 65 DB to 120 DB measured at 1.5 mtr with sound output variation of + 5 DB for 1000 mtr range complete all as specified and directed by Engr-in-Charge. Make : As per PS or equivalant specified by GE.
S&F for Air termination single pointed sluminum rod 12 mm dia 300 mm long complete all as specified and directed by Engr-in-Charge.
S&F for Test point terminal block made of gun metal or phosphorus bronz size 75x75x25 mm drilled and screwed including 3 Nos, 8 mm dia, 25 mm long hexagonal head screw complete all as specified and directed by Engr-in-Charge.
S&F for Aluminum strip 25x3.15 mm with saddles and fixing screws etc for roof conductor and down conductor above ground complete all as specified and directed by Engr-in-Charge.
Rampal Singh Contractor
M/S SHAMSHER ALI SUFI
Mehar Enterprises
M/s Koul & Sons
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .