Renovation and upgradation of shopping complex structure at BSF CAMPUS, Humhama FTR HQ Kashmir UT of JandK

BILL OF QUANTITIES

Item Description Unit Qty Rate Amount

Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear

as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop

drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the

structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in

metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core

sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500

based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as

specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.(c) The fastening brackets of Aluminium

8.32 alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor Sqm 145.00 ₹ 5,015.05 ₹ 7,27,182.25

bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing

The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing

in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the

curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is

payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the

performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings

and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with

Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.

Providing and fixing aluminium work for doors windows ventilators and partitions with extruded built up standard tubular sections/ appropriate Z

sections and other sections of approved make conforming to IS: 733 and IS: 1285 fixing and dash fastners of required dia and size, including necessary

filling up the gaps at junctions, i.e, at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth rust

free straight mitred and jointed mechanically wherever required including cleat angle. Aluminium snap beading for glazing/ pannelling, CP brass/

stainless steel screws all complete as per architectural drawings and the directions of engineer incharge (Glazing panelling and dash fastners to be paid

21.1.1 For fixed porition

21.1.1.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868. Minimum anodic coating of Grade AC 15) Kg 551.091 ₹ 495.05 ₹ 2,72,817.75

TOTAL BOQ AMOUNT ₹ 10,00,000.00

Digitally signed by Om Prakash