SMART EXTERNAL PERIODICAL SERVICES AT LOWER MIDDLE AND UPPER SHANKAR VIHAR UNDER AGE BR-II OF GE SOUTH DELHI CANTT-10

M&L for 15 mm thick rendering with ready mix plaster on faces of brick or concrete wall surface, finished even and smooth including taking down cement or cement lime plaster, any description, on brick or stone walls, concrete surface etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for 10 mm thick rendering with ready mix plaster on faces of brick or concrete wall surface, finished even and smooth including taking down cement or cement lime plaster, any description, on brick or stone walls, concrete surface etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for 5 mm thick rendering with ready mix plaster on faces of brick or concrete wall surface, finished even and smooth including taking down cement or cement lime plaster, any description, on brick or stone walls, concrete surface etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

Preparation of the newly plastered surfaces of walls/ ceiling and M&L applying two coats of GreenPro certified water-based, modified acrylic, exterior Apex Suprema Emulsion or equivalent as per required shade (Company depot tinted) with silicon additives, heat reflectant property, VOC less than 2% by mass, Class A IS-15489 and IS-101 @5-6 sqm/ltr with Graco spray machine over one coat of primer with and including 1mm thick wall care putty to prepare the surface even and smooth complete all as specified and directed by Engineer-in-charge

Preparation of the newly/old plastered surfaces of walls/ ceiling and M&L for applying two coats of distemper oil emulsion, with Graco spray machine on wall surface white or tinted overfor one coat of wall putty avg 1-1.5 mm thick prepared putty base surface complete all as specified and directed by Engineer-in-charge.

Complete removal of existing loose treatment by scraping with mechanical wall/ceiling by vacuum based sanding machine (wall sanding machine with internal dust extraction system & having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7 inch/ 9 inches to make the surfaces free from dust, loose paint etc by using smart periodical methodology/auto roller complete all as specified and directed

M&L for one coat of wall putty avg 1-1.5 mm thick suitable for external surafce complete all as specified and directed.

M&L Applying two coats with Graco-490 spray machine, of GreenPro certified water-based, modified acrylic, exterior Apex Suprema Emulsion or equivalent as per required shade (Company depot tinted) with silicon additives, heat reflectant property, VOC less than 2% by mass, Class A IS-15489 and IS-101 @5-6sqm/ltr after cleaning and removing dirt dust oil grease smog efflorescence stain, thoroughly brushing the surface and removal of existing paint flakes, to obtain an even surface necessary tools and machinery to give an even shade. Application to be done only by applicator authorised by manufacturer, also shall be approved by GE before starting of work

M&L for preparation of old steel surfaces of any description not otherwise described over 10 cms width or girth and apply one coat of synthetic enamel paint, complete all as specified and directed by engineer-in-charge.

M & L for preparation of old wooden surfaces of any description not otherwise described over 10 cms width or girth and apply one coats of synthetic enamel paint all as specified and directed