REPAIR AND MAINTENANCE OF INTERNAL ELECTRIFICATION INCLUDING REPLACEMENT OF FITTINGS and FIXTURE AND REPAIR MAINT OF LIGHTENING CONDUCTOR AND ALLIED WORK AT MIL MIL STATION KANASAR

Amount

Taking down carefully copper/alluminium point wiring for light, fan/ socket or power complete including fittings such as switches, ceiling roses pendents regulators, sockets fittings etc and removing materials from site including making good disturbed surfaces of walls floors etc complete all as specified and directed

Material and labour for point wiring complete with 1.5 sqmm(nominal core) PVC insulated unsheathed 1100 volts grade cable stranded copper conductor single core in PVC casing caping of suitable size complete with sunk pressed steel terminel box for fitting /mounting switches / sockets regulators etc with bakelite sheet 3mm thick cover and with 1.5 sqmm PVC insulated copper conductor earth wire and connecting to earth dolly for one light / fan point controlled by one switch complete all as specified and directed

Ditto all as per item No 2 hereinbefore, but for one bell point controlled by one bell push complete all as specified and directed

Ditto all as per item No 2 hereinbefore, above but for one 5 or 3 pin socket 5 Amps independent complete all as specified.

Ditto all as per item No 2 hereinbefore, but for one 5 or 3 pin socket 5 Amps but on same board all as specified and directed.

Ditto all as per item No 2 hereinbefore, but for 3 pin socket out let 15 Amps independent with cable 2.5 sqmm unsheathed stranded 1100V grade complete with 1.5 Sqmm PVC insulated earth wire and connecting to earth dolly all as specified.

Supply and fix switch piano type white colour flush 5/6 Amps single pole one way complete all as specified.

Supply and fix bell push white colour 5/6 Amps piano type single pole 230 volt one way complete all as specified.

Supply and fix call bell in replacement buzzer AC 230 volt all as specified and directed

Supply & fix socket multi purpose white colour 5 pin 5 Amps flush type complete all as specified.

Supply & fix switch socket combination multi purpose white colour 5 pin 5 Amps flush type complete all as specified.

Supply & fix switch socket combinaton muli purpose white colour 3 pin 15 Amps and 3 pin 5 Amps flush type multipurpose 2in one complete all as specified.

Supply & fix fan regulator electronic switch type 400W step type

Supply and fix in replacement switch piano type white colour flush 5/6 Amps single pole one way complete all as specified.

Supply and fix in replacement switch piano type white colour flush 15/16 Amps single pole one way complete all as specified.

Supply and fix in replacement in replacement bell push white colour 5/6 Amps piano type single pole 230 volt one way complete all as specified.

Supply and fix in replacement call bell in replacement buzzer AC 230 volt all as specified and directed

Supply & fix in replacement socket multi purpose white colour 5 pin 5 Amps flush type complete all as specified.

Supply & fix in replacement socket muli purpose white colour 3 pin 15 Amps and 3 pin 5 Amps flush type multipurpose 2in one complete all as specified.

Supply & fix in replacement fan regulator electronic switch type 400W step type

Supply and fix in replacement Pendent holder B22 type operating voltage 230 V, polycarbonate body all as directed by engineer-in-charge.

Supply and fix in replacement ceiling rose , 3 phase polycarbonate body all as directed by Engineer-in-Charge.

Supply and fix in replacement switch Modular type white colour flush 5/6 Amps single pole one way complete all as specified.

Supply and fix in replacement in replacement Modular type bell push white colour 5/6 Amps piano type single pole 230 volt one way complete all as specified.

Supply & fix in replacement Modular type socket multi purpose white colour 5 pin 5 Amps flush type complete all as specified.

Supply & fix in replacement Modular type socket muli purpose white colour 3 pin 15 Amps and 3 pin 5 Amps flush type multipurpose 2in one complete all as specified.

Supply & fix in replacement Modular type fan regulator single module / double module type 400W step type

Supply & fix in replacemet sheet metal enclosure powder coated for MCB DB SPN 8 way with Din rail and busbar complete all as specified.

Supply & fix in replacemet MCB SP 250V 6Amps to 32 Amps 10 KA "C" curve rating ISI marked and connecting complete all as specified.

Supply & fix in replacemet MCB SPN 250V 6 Amps to 32 Amps 10 KA "C" curve rating ISI marked and connecting complete all as specified.

Supply & fix in replacemet MCB TPN 440V 63 Amps to 10 KA "C" curve rating ISI marked and connecting complete all as specified.

Supply and lay testig and commisioning in replacement LT copper cable 1.1 KV Grade 2.5 Sqmm 3 core steel wire armoured PVC insulated copper cableconforming to IS-7098 , CM/L 566489 in duct / tray / wall / ceiling with the help of steel clamps including cable glandes with rubber cover all as directed by engineer-in-Charge. Make:- KEI / Polycab / Havellls

Supply & fix in replacement self ballasted LED batten Extruded metal body with PC diffuser, fin and groove shap base for batter heat dissipation 4 feet 18 watt to be install at any height on wall / ceiling having power factor more than 0.95 , operating voltage 90-305 VAC, LED life 30,000BH, high surge protection 2.5 KV, cool white 6500K colour temperatur all as specified and directed. Make Bajaj, Havells, Philips.

Supply & fix in replacement self ballasted LED batten Extruded metal body with PC diffuser fin and groove shap base for batter heat dissipation 2 feet 10 watt to be install at any height on wall / ceiling having power factor more than 0.95 , operating voltage 90-305 VAC, LED life 30,000BH, high surge protection 2.5 KV, cool white 6500K colour temperatur,number of switch cycle 7500 complete all as specified and directed. Make Bajaj, Havells, Philips.

Supply and fix in repairs performance energy efficient LED 40 Watt of size 1200x350mm sarface mounting (for office use) with robust electronics Make:- Crompton Cat Part No - LCTLSN-40-CDL (1x4) or equavalent of Bajaj, Havells, Philips

Supply, fixing in replacement and testing old flurocent lamp by new LED PL-L lamp of capacity 18W base 2G11 , four pin, lenght 419 mm, width 44 mm, height 29 mm operating voltage range 140-270 V, AC, frequency 50-60 Hz, , light colour warm wight 6500K, system lumans1850 frosted glass having nominal life of 25000 Hours, number of switch cycle 7500 complete , having power factor more than 0.95 all as directed by Engineer-in-Charge. Make- Havells / BAjaj / Crompton

Supply & fix in repairs Energy Efficient LED light 9 Watt of size 537mmx22mmx37mm for mirror light Make :- Havells Cat Part No- LHEXBTP7UN1W009 or equavalent of Bajaj, Havells, Philips

Supply & fix squere surface mounted LED 06 Watt flat panel, alumminum housing complete all as specified and directed Make:- CG Cat Part No- LCDSPL-S-06-CDL or equavalent of Bajaj, Havells, Philips.

Supply & fix squere surface mounted LED 12 Watt flat panel, alumminum housing complete all as specified and directed Make:- CG Cat Part No- LCDSPL-S-12-CDL or equavalent of Bajaj, Havells, Philips.

M & L for opening flameproof emergency light of capacity 18 watt and doing preventive maintenance, repairing electronic circuit making servisible including supply and fix in replacement battery of capacity 6 AH , 07-12 Volt as per existing installed on site including replacing tube of capacity 18 Watt, single twin tube PL-L type , length 200 mm to 220 mm as per existing installed, colour temperature 4000K, lamp base type 2G11 all as directed by Enginee-in-Charge. Make - Oshram / Bajaj / CG/ Havells

Supply and fix in replacement flame proof switch Knob made of Ceramic / plastic to be fixed on Flame proof MCB DB box for operating the MCB ON/OFF all as directed by Engineer-in-Charge.

LIGHTENING CONDUCTOR

Material and labour for taking down old broken / rusted aluminium lightning conductor of any size and supply and fix in replacement Aluminium strip 25 x 3 mm with saddles and fixing screws etc for roof conductor and down conductor above ground complete all as specified .

Material and labour for taking down old broken / rusted copper lightning conductor of size and supply and fix in replacement copper strip 20 x 3 mm with saddles screws etc for roof conductor and down conductor above ground complete all as specified .

Material and labour for taking down old copper air termination and supply and fix in replacement air termination , single pointed , copper road 12 mm dia and 300 mm long complete all as specified and directed by Engineer-in-Charge.

M & L for test point terminal block made of gun matel or phosphorus bronz size 75 mmx75mmx25 mm drilled and screwed including 3 nos , 8 mm dia 25 mm long hex head screw complete all as secified and directed by Engineer-in-Charge.

M & L for taking down old broken cramic / plastic insulator and supply and fix in replacement ceramic insulator along with nut and bolts for fixing copper/ aluminium strip of size 20x3 mm on wall / roof/ floor all as directed by Engineer-in-Charge.

M & L for taking down old broken aluminium strip along with insulators and straghting carefully without braking and refixing same with insulator and nut/ bolts after jointing broken portin by nut and bolts all as directed by Engineer-in-Charge.

Materilas and labour for dismantling old earthing of any type Supply, installation, testing of advanced maintenance free environment friendly CPRI approved earthing 10 feet long 17 mm dia earth electrod made high tensile low carbon steel circular rods , molecular bonded copper on outer surface ( minimum copper bonded thickness 250 micron) with terminal to connect incoming strips with 02 bags (25 Kg each) of enviroment friendly backfill compound with ROHS test certificate for each. The remaing space will be filled with soil and top of earth pit covered with high density polymer Earth pit chamber cover of dimension (300 mm x 300 mm x 214 mm) with locking seal as to achieve the desired ohmic value complete all as specified and directed. Note: Payment will be released only after the resistance value achived less than 1 ohm. If value of resistance found more than 1 ohm contractor will do the freah earthing without any extra cost.

BIDAWAT ENTERPRISES