CONSTRUCTION AND DEPLOYMENT OF ARTIFICIAL REEF MODULE ON THE SEABED AT RATNAGIRI AND SINDHUDURG COAST FOR THE CORAL RESTORATION WORK OF SOUTH KONKAN MANGROVE DIVISION. Under GCF supported ECRICC Project

The supply and erecting carbon fiber strip of improving strength and ductility, load carrying capacity, and corrosion resistance material having high strength and stiffness to weight ratio. Also, the concrete substrate should be made using structural adhesives for creating monolithic composite section. (specifications provided in Figure 1 and Table 1) for coral reef rehabilitation and other marine biota. The mechanical property of carbon fiber laminated shall be as per the relevant standard code (like ASTM-D3039) and other property of the material shall be as follows: (1) Tensile Strength – min 4900 MPA, (2) Tensile Modular – min 248 GPA, (3) Density – min 1.8 g/ccm3, (4) Elongation - 2% 50 mm Carbon Fiber Strip (3 mm thick) required for AR dome

The supply and erecting carbon fiber strip of improving strength and ductility, load carrying capacity, and corrosion resistance material having high strength and stiffness to weight ratio. Also, the concrete substrate should be made using structural adhesives for creating monolithic composite section. (specifications provided in Figure 1 and Table 1) for coral reef rehabilitation and other marine biota. The mechanical property of carbon fiber laminated shall be as per the relevant standard code (like ASTM-D3039) and other property of the material shall be as follows: (1) Tensile Strength – min 4900 MPA, (2) Tensile Modular – min 248 GPA, (3) Density – min 1.8 g/ccm3, (4) Elongation - 2% 100 mm Carbon Fiber Strip (1.4 mm thick) required for AR dome

The supply and erecting carbon fiber strip of improving strength and ductility, load carrying capacity, and corrosion resistance material having high strength and stiffness to weight ratio. Also, the concrete substrate should be made using structural adhesives for creating monolithic composite section. (specifications provided in Figure 1 and Table 1) for coral reef rehabilitation and other marine biota. The mechanical property of carbon fiber laminated shall be as per the relevant standard code (like ASTM-D3039) and other property of the material shall be as follows: (1) Tensile Strength – min 4900 MPA, (2) Tensile Modular – min 248 GPA, (3) Density – min 1.8 g/ccm3, (4) Elongation - 2% Anchor 100 mm Strip (1.4 mm thick) required for AR dome

Dome Machining Cost

The supply and erecting carbon fiber strip of improving strength and ductility, load carrying capacity, and corrosion resistance material having high strength and stiffness to weight ratio. Also, the concrete substrate should be made using structural adhesives for creating monolithic composite section. (specifications provided in Figure 1 and Table 1) for coral reef rehabilitation and other marine biota. The mechanical property of carbon fiber laminated shall be as per the relevant standard code (like ASTM-D3039) and other property of the material shall be as follows: (1) Tensile Strength – min 4900 MPA, (2) Tensile Modular – min 248 GPA, (3) Density – min 1.8 g/ccm3, (4) Elongation - 2% 100 mm Strip (1.4 mm thick) required for Reef Tile

Tile Machining Cost

Transportation of Material - works such as light houses, guide poles to be constructed on the island or in the Sea/Creek, the actual boat charges for transportation of materials and labours shall be taken and detailed rate analysis for transportation of materials by boats shall be done and approved by Coastal Engineer. The boat charges shall be considered - Big boat (Double Cylinder Carrying Capacity = 5.00 MT).

Under Water Inspection Before

Under Water Inspection After