SPECIAL REPAIR OF 03 BATHROOM AT BLDG. NO P 818 AND P 819 OTM ACCN OF 15 BN THE LI INF SPL REPAIR TO BLDG NO P11 OFFR MD ACCN AT BHAGAT ROAD AND PROVN OF 04 CATTLE TRAP AT ENTRANCE OF OFFRS COLONY AT BHAGAT ROAD AND OTHER SANCTIONED WORKS UNDER G

Amount

Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed

M&L 25 mm thick cement concrete type B-1, 1:2:4, (20mm graded stone aggregate) as in floor finishes etc.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off premises complete all as specified and as directed by the Engineer-in-Charge.

M&L for non skid ceramic, coloured, joint free, tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match with colour of the tiles over and including screed bed of 15mm thick cement mortar (1:4) complete all as specified and as directed.

S&F glazed ceramic tiles 350mmx250mm/300mmx200mm, 7mm thick as on vertical surfaces viz dados, skirtings etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match colour of tiles over and including rendering 10mm thick cement mortar (1:4) complete all as specified and as directed

S&F in repairs vitreous china ware squatting pan ‘Orissa’ pattern size 580x440mm white with integral foot rest including connection to trap and flushing pipe, anti-syphonage pipe etc and making good to floor etc complete all as specified and as directed.

S&F in repair vitreous china wash hand basin, white, flat back size 550mmx400mm including cast iron or mild steel brackets including cutting for and pinning in brackets complete all as specified and as directed.

S&F in repairs vitreous china urinal half stall type, white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with including 60mm brass screws, pointing around urinal back in cement complete all as specified and as directed by Engr-in-Charge.

S&F in repair 10 litres capacity PVC valve less symphonic action type, flushing cistern, low level, white with inlet, ball valve, PVC flush pipe, float and handle including brackets complete all as specified.

Taking up or down 15 mm bore steel tubing and connection including cleaning serviceable steel tubing and fittings for refixing and removing unserviceable from site including cutting chases in wall/floor and making good the surfaces complete all as specified.

All as per item No 10 hereinbefore but 20mm dia .

S&F 15mm bore galvanized steel water tubing, medium grade with all fittings fixed to wall, ceiling or laid in floors complete all as specified.

All as per item No 12 hereinbefore but 20mm dia.

S&F in replacement 15 mm bore chromium plated bib tap fancy type cast copper alloy with crutch or butterfly handle screwed down screwed complete all as specified.

S&F in repair 15 mm bore stop valve (or angle valve) fancy type chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends complete all as specified and directed.

All as per item No 15 above but with long shank and cup(concealed type).

S&F 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density polythene ball screwed for iron pipe (Min for 20mm – 210 gm) complete all as specified and directed.

S&F in replacement PVC connection 15mm dia and 45cm long with two Nos of brass check nuts and washers complete all as specified and directed.

S&F in repair pillar taps, cast copper alloy with capstan heads chrominm plated fancy type, screwed down high pressure with or without lettered Hot or Cold with long screwed shank and fly nuts, srewed for iron pipe and fixed 15mm bore.

S&F in repairs Chromium plated grating 125mm dia circular of approved make and fixing with cement mortor 1:3 on Nahani trap or floor trap.

S&F brass chromium plated towel rail 20 mm dia, 600mm long fixed with chromium plated brass screws wooden/plastic gutties complete all as specified and directed.

Dismantling of water storage tanks including all fittings exc 500 & n.exc 1000 ltrs capacity and removing from site.

Supply, hoist and fix in position; 1000 litres capacity rotational moulded polythene water storage tank (cylindrical, vertical with closed top) ISI marked (Name of firm embossed or engraved on the body of tank) conforming to IS 12701, double layered complete all as specified .

Dismantling of cast iron drain pipe 100/75 mm dia from floor/walls etc and removing from site.

S&F cast iron soil, waste and vent pipe sand cast, any length, with or without ears with cement joints fixed to walls 75mm dia

All as per item No 26 above but bore of pipe 100mm dia.

S&F cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) diameter of outlet in 75mm.

M& L Cement concrete type E-2, 1:5:10 using 40mm graded crushed stone aggregate, as in foundations filling and mass concrete as in sunken floor.

M&L for 15mm thick rendering in cement mortar 1:3 with using 3% WPC as in sunken portion complete all as directed.

M&L for applying evenly a tack coat in one layers on concrete surface for fixing of APP membrane of industrial bituminous 85/25 @ 1.20 Kg per sq mtr including cleaning surfaces.

M&L APP based polymeric membrance minimum weight not less than 3.0kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150gms/sqm) land on primed surface by forced application (sealed by flame) with over lap of 10 cm finally it will be finished with a coat of aluminium paint @ 0.20 Kg/Sqm as per manufactures instruction complete all as specified and directed.

M & L for GI pipe 40mm dia (medium grade) cut to size and shape, as in spouts and fixed in position complete all as specified and directed.

Taking down Chowkhat or frames not exceeding 1.5 Sqm each with shutters (without taking off shutters from the frames) and removing from site.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exc 1.5 sqm and n exc 4.00 swm incl removing from the premises complete all as spd and directed

S & F of solid PVC door frame of size 50mm x 47mm made out of 5mm plaint colour PVC sheet reinforced with MS square tube, fixing in opening as per specification and drawing and as directed by Engineer-in-Charge.

Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style)consisting of frame made out of MS tubes for top and bottom rail MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per directed by Engr-in-Charge

M & L for framed work as in door chowkats or frames, cooler stand, nosing of stair case steps of any size and in any position of grade FE 410 W Gde - E250 Quality - A and all as directed by the Engr in Charge.

S & F 300 mm mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed

S & F aluminium barrel tower bolt of extruded section 200mm size.

S & F aluminium cast type anodised handles 150 mm size.

S&F butt hinges, medium weight cold rolled mild steel 100mm size.

Taking down cement plaster including raking out joints, hacking for key,scrubbing down with water built in cement mortar all as specified and as directed.

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement

M&L for rendering 5mm thick in cement mortar 1:3 on ceilling finished even smooth without using extra cement.

M & L for preparation of newly plastered surface of walls and applying two coats of oil bound distemper (white or tinted) over a coat of chalk whiting primer complete all as specified and as directed by Engr-in-Charge.

M & L for preparation of newly plastered surface of walls and applying two coats of cement base paint over a coat of chalk whiting primer complete all as specified and as directed by Engr-in-Charge.

M&L for applying three coats of white wash wash on ceiling including preparation of newly plastered surface.

M&L preparation of old plastered surfaces and applying one coat of white wash on ceilings.

M&L for preparation of new wooden surface of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

M&L for preparation of new surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide as directed all as specified.

M & L for preparation of old surface of walls and applying one coats of cement base paint complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of old painted surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint in tint as directed all as specified.

Demolition of mud in roofs any thickness including leeping plaster (whether full thickness removed or only a part thereof) all as specified.

Dismantling of brick tiles single layer as in roof covering complete all as specified

M & L 40 mm thick brick tiles laid on bedding layer of cement mortar 1:6, 15mm thick and joints grouted flush in cement mortar 1:3, mixed with 5% of crude oil by weight of cement over APP membrane complete all as specified and directed.

All as per Ser item No 57 above but except tiles.

M & L for 50mm thick (average thickness) PCC padding of cement concrete type C-I (1:3:6) using 20mm graded crushed stone aggregate to bring top surface of slab in slope complete all as specified

Cutting grooves in brick wall 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed.

M&L for 10 mm thick rendering in cement mortar 1:4 on concrete surfaces when concrete is stil green finished even and fair including mixing of water proofing compound as per manufacturer instruction etc complete all as specified and as directed. Note :- Water proofing compound shall be measured & paid for separately.

Supply only Liquid water proofing compound complete all as specified and as directed.

M & L flush pointing in cement mortar 1:3 on brick tiles laid flat in roof or paving incuding raking out joints complete all as specified and directed.

Complete removal of existing treatment of wall surfaces applying two coat of oil bound distempering over one coat of wall putty (minimum thickness 3mm) complete all as specified and directed by Engr-in-Charge.

M&L for complete removal of existing treatment on wall surfaces and applied two coat of cement base paint complete all as specified and directed by Engr -in-charge.

M & L for preparation of old plastered surfaces of ceiling and applying two coats of white wash etc. complete all as sepcified and directed

M&L for repairing of R.C.C projections, chajjias, roofs, facia etc by necessary preparation. Scrapping, cutting, chiseling derusting and cleaning exposed reinforcement, surfaces of damaged/ loose R.C.C surfaces with cement concrete (1:1.5:3), Type A-1, using 12.5mm graded crushed stone aggregates and reinforcement with welded mesh (If Reqd) of weight exc 2 kg per sqm but n.exc 3kg/sqm with or without facia and finished with cement and sand mortar (1:3) using coarse sand and work in patches area n.exc 5 sqm each and thickness of R.C.C member n.exc 70mm including necessary form work and applying two coats of finishes to match with the existing surfaces in at any height complete all as specified and directed by Engr-in-charge.

M&L for non-skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in skirting set and jointed in neat cement slurry and pointed in white or colored cement to match over and incl 10mm thick rendering as backing coat of cement mortar 1:4 complete all as specified.

M&L for 50mm PCC 1:3:6 type C1 using 20mm graded stone aggregate as in plinth protection etc. finishing the surfaces even and smooth without using extra cement all as specified

Taking down shutters of any description not exceeding 1.00 Sqm each complete all as specified and as directed.

Hacking out old broken glass of any thickness size or description from wooden frames or metal frames fixed with wooden beads/ putty.

M&L for sheet glass 3mm thick ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane.

M&L for preparation of old painted wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint in any tint all as specified and directed by the Engr in Charge.

S&F 35 mm thick plain, framed, panelled shutters factory made of second class hard wood (Hollock) door shutters with two panels having lock rail and panels of 9mm BWP commercial ply, the size of rail and style as per IS 1003 (part-I), kiln seasoned and chemically pressure treated hammer marked complete all as specified.

S&F 35mm thick glazed and skeleton shutters of 2nd class hard wood (Hollock) open rebated and prepared to receive glass gauze etc without sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I Sec 8 clause 8.24 (a).

S&F steel window 1.25mm thick box type (primer coated) ERW hollow P section of size 60x25mmsingle rebated comprises gauged skelton shutter ERW sec 50x20mm and 1mm thick with two open able leaf consisting two Nos sash bars of T section 20x3mm completed welded to frame with one vertical mullion of ERW box type T section of size 60x25mm and 1.25mm thick incl cutting holes and making good dismantled portion PCC 1:2:4 type B1 four Nos for each window incl following fittings weld to frame shutter (a) hold fast, 150mm long of 12mmx3mm made to shape-04 Nos per window (b) handle of Z sction 20x25mm, 100mm long 01 Nos per leaf (c) MS Tower bolt 150mm long of 12x3mm made to shape-04 Nos per window (b) handle of Z section 20x25mm, 100 long stoper-01 No per leaf () MS pintal of hinges of size 75mmx12mm-02 Nos per leaf (g) fabrication & fixing arrangement as per Drg No. CEJZ/TD-06-07 , Note : wire mesh and painting shall be measured and paid separately under appropriate item.

All as per Ser item No 76 above but glazed windows.

S&F steel ventilator with top hung shutter including hinges, steel peg stay complete.

M&L in replacement 18/19mm thick prelaminated particle board exterior grade prelaminated on one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber framed work including fixing arrangement complete all as specified

S&F floor door stopper aluminum alloy body anodized with hard drawn steel spring overall length 150mm

S&F continuous piano type hinges mild steel bright finish, width of flaps (when opened) 40mm complete.

S&F galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with tinned tacks or galvanized wire staples complete all as specified as directed.

M&L mild steel work as in hold fasts, knee piece and similar small article complete all as specified, conforming to Fe-290 Gde-E-165

S&F 250mm long Aluminum alloy, anodized sliding door bolt with hasp & staple (bolt type) fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminum alloy and fixed.

S&F Aluminum anodized barrel tower bolt of extruded section of size 150mm

Refixing old 15mm bore steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and as directed.

Refixing old 20mm bore steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and as directed.

Cutting and chases to brick work, pinning in making good for concealed water tubing area n exc 10 cm girth

Cutting holes in brick walls of half brick built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 depth of embeded portion of hold fast or lugs measured from the face of the jamb into the wall complete all as specified and directed.

S&F Hot and cold mixer fancy type single or double legged, cromium plated cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends iron pipe suitable for 15mm bore pipe fixed to wash hand basin complete all as specified

Supply, hoist and fix in position; 500 litres capacity rotational moulded polythene water storage tank (cylindrical, vertical with closed top) ISI marked (Name of firm embossed or engraved on the body of tank) conforming to IS 12701, double layered including dismantling the existing tank complete all as specified .

S&F 20 mm Gun metal globe or gate valves, with iron wheel head screwed both ends for iron pipe and fixed.

S&F in replacement; sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mmx460mm bowl size 410mmx330mmx160mm complete all as specified.

Material and labour for 25mm dia mild steel pipe curtain rod, powder coated fixed with & including MS powder coated hooks/ brackets and decorative finials (at both side) complete all as specified includng fixing of long size rawl plugs in wall for MS hook complete all as specified and directed.

Demolition and breaking up drain pipes AC/PVC pipe in event n.exc 150 mm dia including all fittings.

S&F 110 mm PVC (SWR) Rain water pipes single socketed in any length with rubber ring joints fixed to walls all as specified and directed

S&F PVC (SWR) bends 110 mm all as secified and directed

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white, including plastic seat cover closed pattern including bolts, flush pipe of polyethylene of low or high density PVC 32mm dia anti-syphonage pipe etc and connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe etc complete all as specified and as directed.

Supply and fixing plastic water closet seat cover, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging devices complete.

S & F brass chromium plated jet for pedestal pattern water closet including PVC flexible pipe alongwith complete necessary fittings all as specified and directed by the Engr- in- Charge.

Excavation in trenches n exc 1.5m wide and n exc 1.5m in depth, for foundation etc n exc 10 sqm in plan and n exc 1.5m in depth and getting out in hard/dense soil complete all as spd and directed.

M & L for cement concrete type D2, 1:4:8 using 40 mm graded stone aggregate as in foundation, filling and mass concrete complete.

M & L for formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter, rough finished surface of concrete complete.

M & L for RCC work (nominal mix), type B0, 1:2:4 (12.5 mm graded stone aggregate) as in walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilaster and buttresses complete.

S & F mild steel framed work for cattle catching frame (made out of MS tube, angle iron, flat iron etc) such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165. Note : Cattle catching frame shall be made as directed.

M&L brick work with sub-class 'B' old size bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete.

M & L for providing, cement concrete type C 1 1:3:6 (20mm graded aggr) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

M&L 10mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished the surface even and fair without using extra cement

Returning, filling in , including spreading, levelling , watering and well ramming in layers not exc 25 cm thick complete.

Removal of surplus soil to a distance not exc. 50mtr and depositing where directed at a level not exc. 1.5m above the starting point.

Supply, installation, commissioning of water cooler fully stainless steel, floor mounted electric driven single phase having approx storage and nominal cooling capacity 60/120 ltr complete all as specified and directed.

Suppy, Installation and commissioning of glass top Deep Freezer of capacity 320 Ltrs single phase 240 Volt 50 Hz including electrical connection complete.

Supply and fix voltage stabilizer for automatic operation, single phase naturally air cooled indoor type and designed for input variation between 170V to 250V with output voltage stabilized at 230 volts with accuracy of + 2.5% and of capacity 2.0 KVA complete all as specified and directed.

Taking down carefully point wiring of any type (i.e. on wooden batten, surface conduit, casing capping or concealed conduit) complete for light, fan, socket or power point with fittings & fixtures such as ceiling rose, electric fittings, holders, switches, sockets, wooden batten, conduit etc. including accessories such as wooden gutties/rawal plug, screw etc including making good disturbed surface to match with existing surface.

Taking down sub main wiring of two single core PVC cable PVC insulated 4 / 6 sqmm including conduit or wooden batten and remove from the site of work and making good the disturbed surfaces of wall or floor etc. as directed by Engineer-in-Charge.

Taking down main switch / DB as directed by Engineer-In-Charge.

M&L for point wiring with 1.5sqmm FRLS PVC insulated sheathed single core multistranded copper conductor cable for working voltage 1100 volts grade, drawn into and including PVC conduit concealed in wall (except on column and roof where the same must be fixed on surface) with accessories, ceilings and including pressed steel terminal box made out of 1.6mm thick MS sheet fixed flush with wall required size hylam laminated sheet cover of 3mm thick fixed with metal screw for housing the switches, sockets outlet etc including 1.5 sqmm FRLS PVC insulated copper conductor cable earth continuity conductor and connecting to the common earth dolly all as specified and directed for the following:- (a) One light /fan point controlled by one way switch.

(b) One 3 pin socket outlet 5 amp on independent board.

(c) One 3 pin socket outlet 5 amp same board.

(d) One 2 way point controlled by one two way switch.

(e) For one call bell point.

All as per ser item No.117 above but with 4 sqmm multistranded copper conductor FRLS cable with 4 sqmm earth wire for AC/Geyser on independent board complete all as specified and directed.

All as per ser item No.117 above but with 2.5 sqmm multistranded copper conductor FRLS cable with 2.5 sqmm earth wire for one 6 pin socket outlet 15 amps on independent board.

S&F switch piano flush type 6 Amps 230V AC single pole one way.

S&F ceiling rose, surface backlite 65 x 50mm three/two terminals complete all as directed.

S&F switch Piano 16 Amps, flush button type, SP, one way, 230 Volts, AC complete.

S & F socket out let 2 in 1 multipurpose 5 pin 6 Amps, flush type, 230 / 250 Volts complete.

S & F socket combination 3 pin 6 & 16 amps, flush type, multipurpose, 230 / 250 volts , AC with ISI marked complete.

M&L for submain wiring with two RUNS of single core 4 sqmm for main wire and one run of single core 4 sqmm as earth wire of stranded copper conductor FLRS PVC insulated unsheathed cables drawn through and including pvc concealed conduits in wall and necessary cutting and chassing for rigid PVC conduit ISI marked of required sizes and all accessories complete all as specified & directed Note:- Two run of single core 4sqmm copper wire FRLS for main, one run of single core 4sqmm copper wire as earth wire and one run of PVC conduit shall be considered as one unit

M&L for submain wiring with two RUNS of single core 4 sqmm for main wire and one run of single core 4 sqmm as earth wire of stranded copper conductor FLRS PVC insulated unsheathed cables drawn through and including pvc concealed conduits in wall and necessary cutting and chassing for rigid PVC conduit ISI marked of required sizes and all accessories complete all as specified & directed Note:- Two run of single core 4sqmm copper wire FRLS for main, one run of single core 4sqmm copper wire as earth wire and one run of PVC conduit shall be considered as one unit

Supply & fixing lamp holder PVC, insulated body with back plate suitable for batten fittings complete.

S&F exhaust fan, AC, 230/240 volts of size 300 mm sweep, Heavy duty, Metal body with louvers / shutter and connecting with 3 core 1.5 sqmm copper conductor PVC insulated wire from fan to ceiling rose complete.

S&F pressed sheet metal enclosure (MCB DB), single phase and neutral with 200 Amps rated bus bar, single door type, 240 volts including grouting in wall and connecting 4 way complete.

S&F MCB SPN 32 Amps, 230 volts AC and connecting using suitable size of wire all as specified and directed.

S&F MCB SP 6 to 32 Amps, 230 volts AC and connecting using suitable size of wire all as specified and directed.

Supply & fixing in replacement LED street light fitting 60W including LED lamp pressure die cast aluminum IP66 with surge protection device of 10KV, IK7 LED (SEOUL) 6500K and connecting to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.75mm 3 core complete all as specified and directed including bracket and fixing clamps etc.

Supply and fix modular switch 6 Amps single pole one way complete.

Supply and fix modular switch 16 amps one way single pole complete.

Supply and fix modular socket outlet multi pin 5 amps complete.

Supply and fix modular socket universal type 6 pin 5/15 amps multi pin complete.

Supply and fix modular bell push, 5 amp, SP ,one way, 230 volts AC.

Supply and fix modular metal flush box 18 way with modular white colour plate with frame including making good to the disturbed surface complete all as directed by Engr-in-Charge.

All as per Item No. 142 here-in-before but 12 way

All as per Item No. 142 here-in-before but 8 way

All as per Item No. 142 here-in-before but 6 way

All as per Item No. 142 here-in-before but 4 way

All as per Item No. 142 here-in-before but 3 way

All as per Item No. 142 here-in-before but 2/1 way

Supply and fix bell buzzer/ding dong AC 230 volts AC,single pole.

S&F SPN Enclouser with a two pin and earth plug and socket complete with one MCB 20A

Supply and fix 2 module, modular fan regulator electronic rotary step type not less than 300 watt single phase A/C 230 volts complete as specified and directed.

Supply and fix MCB DB, TPN 4 way Vertical type with single/three phase outgoing with provision for MCCB as incomer 415 volt with 200 amps rated bus bar.

Supply and fix MCCB 63 Amps 4 pole 415 Volt,16 KA breaking capacity .

Supply & fixing MCB DB SPN with 200 amps rated Bus Bar suitable for MCBs 8 way double door all as specified and directed by Engr-in-Charge.

Supply and fix MCB 63 amps DP 240 volt.

S&F in replacement T8 Batten fitting (box type) suitable for LED light 20W, 220V AC connecting with three core flexible copper conductor cable of size 0.75mm 3 core from ceiling rose complete all as specified and directed.

S&F in replacement LED Tube rod 20W ultra bright, with very high efficacy suited for installation in T-8 fitting with G13 lamp holder complete all as specified and directed.

M&L for earthing complete with GI steel earth plate electrode 60x60cmx6.00mm thick buried directly in ground / earth pit not less than 2.25m deep below the ground level with top edge of the plate not less than 1.5 m below the normal ground level connected to test point by using GI wire of dia 4mm as earthing lead soldering/ revited to earth plate at one end and connect to DB by means of nut, bolts etc complete with PCC pit (1:3:6) type C1, MS cover with handle funnel with watering pipe wire mess GI protection pipe for earthing lead all complete as specified and as per electric plate No.3 of SSR Part I

S&F in replacement LED street light fitting 25W including LED lamp pressure die cast aluminium IP-66 with surge protection device of 10 KV, IK7 LED (SEOUL) 6500 and connecting including all fittings as specified and directed by Engr-In-Charge.

Supply & fixing decorative wall light fixture made up of polycarbonate, with 12 watt LED bulb.

Supply & fix exhaust fans made of sturdy engineering plastic, single phase 230/ 240 V heavy duty of size 225 mm sweep with louver, including cutting hole on wall as required for fixing and electrical connection upto ceiling rose.

Taking down existing Ceiling fan and refixing the same after B/R works

Taking down existing Geyser and refixing the same after B/R works

M&L for making wall opening and grouting the nut and bolt in the wall for exhaust fan of size 300mm sweep including cement work and making good the disturbed surface etc

Cutting of road / hard standing foot path not exceeding 0.30cm wide and 0.6 mtr depth for laying of pipe line including making good with PCC 1:3:6 type C2 complete all as specified and directed

Drilling and taping cast iron water mains (in position) for branch connection of 20mm dia including ferrute and required excavation, removal, returning filling, T&P etc complete all as specified and directed.

Material and labour ball brass valves, high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed

Supply and laying galvanised steel water tubing, medium grade, ISI marked, 50mm bore, including all fittings like, union, elbow, nipple, reducers, sockets, plugs and end caps etc fixed complete to walls and ceilings / laid on floors/ground and in trenches all as specified and directed.

All as per item No. 168 above but 40 mm bore

All as per item No. 168 above but 25 mm bore.

All as per item No. 168 above but 20 mm bore.

Supply and fixing gunmetal globe/gate valve with iron wheel head, screwed both ends of following sizes ISI marked, including all fixing accessories all as specified and directed. (a) Gunmetal gate valve suitable for pipe of 50mm size

(b) Gunmetal gate valve suitable for pipe of 40mm size

(c) Gunmetal gate valve suitable for pipe of 25 mm size

(d) Gunmetal gate valve suitable for pipe of 20mm size

Mild Steel framed work as in doors or gates of angle iron and other sections including pintle hinges etc. Gde Fe-410-O or Fe-310-O complete including welding drilling ec with rails and guides fastening/fixing complete and taking down old unserviceable gate all as specified and directed.

Supply, fabricating and fix valve chamber cover with handle made out of MS plain sheet of thickness 1.6 mm as per IS 2062 of various sizes as per existing valve chambers on angle iron frame of dimensions and painting one coat of red oxide primer and two coats of synthetic enamelled paint as directed including dismantling the existing U/S valve chamber and cover.

G S TRADERS

SARASWATI CONSTRUCTION CO

JAGDISH KUMAR SEHGAL